Where do I find extra-EXTRA long NON-powered PCI-E Extendors?

[gtraah]

Hi I am getting frustrated Is there anywhere I can find extra long PCI-e Extendors Why are all the long ones powered? What if you dont need power as you have the extra Motherboard slot.

I have 7 GPUS needing to go into this MB

THanks for your help

[1714956087]

1714956087

[1714956087]

1714956087

[1714956087]

1714956087

[TrollboxChamp]

zoomhash.com get the usb based ones and thank yourself when you are constructing

http://zoomhash.com/collections/frontpage/products/powered-pci-express-pci-e-1x-to-16x-riser-flex-usb-extender-sata-not-molex-3feet

3 feet. Sata powered tho not molex!!! (i personally like that hehe)

[gtraah]

zoomhash.com get the usb based ones and thank yourself when you are constructing

http://zoomhash.com/collections/frontpage/products/powered-pci-express-pci-e-1x-to-16x-riser-flex-usb-extender-sata-not-molex-3feet

3 feet. Sata powered tho not molex!!! (i personally like that hehe)

Thanks But what if my motherboard has a 6 PIN Slot for the PCI-E Cards meaning you dont need powered risers? Does this mean no matter what I have to use powered risers?

[Damnsammit]

I have 1x to 1x unpowered cables that you can daisy chain. How long are you looking for?

[gtraah]

30cm+ would be great, Just wondering If the 1x - 1x will work with the R9 290x That I have, I am using 16x - 1x For most of the cards now accept one slot which Requires a 16x Card in it...

One of my Mobo 7 x Cards total 6 x USB 1m powered long risers and 1x 16 to 16x powered ribbon riser .. Its my other MB which is giong to be for the other 7 x cards, This one requires 1 x 16 on the last slot but all the other slots can be 1x AND this is the board with the powered 6pin connector on the MB..

Now I am wondering if I can connect the 1x into the MOBO can I connect 1x on the card also I have not tried this, All the cards are 290x Sapphire

[TrollboxChamp]

30cm+ would be great, Just wondering If the 1x - 1x will work with the R9 290x That I have, I am using 16x - 1x For most of the cards now accept one slot which Requires a 16x Card in it...

One of my Mobo 7 x Cards total 6 x USB 1m powered long risers and 1x 16 to 16x powered ribbon riser .. Its my other MB which is giong to be for the other 7 x cards, This one requires 1 x 16 on the last slot but all the other slots can be 1x AND this is the board with the powered 6pin connector on the MB..

Now I am wondering if I can connect the 1x into the MOBO can I connect 1x on the card also I have not tried this, All the cards are 290x Sapphire

One i linked is 90 cm. Not sure about 1x-1x on a 16x card. I believe it needs to be 16x on the card side. All mine are. (280x)

[Damnsammit]

Yeah 1x to 1x works fine for mining.

Mine are only 19cm though so you'd have To daisy chain them.