I have modminer-20120709-50c63a3.bin
I may have the other, and will check when I can
1) I uploaded this file to the FPGA (renamed to firmware.bin of cause)
2) I pressed RESET
3) I unplugged USB, plugged it in (5-10secs), led is blinking
here is what I see (ignore the formatting):
bfgminer version 3.10.0 - Started: [2014-03-07 00:08:06] - [ 0 days 00:00:18]
[M]anage devices [P]ool management
ettings [D]isplay options [H]elp [Q]uit
Connected to 127.0.0.1 diff 3.81G without LP as user usr001001
Block: ...ccfac2a4372b1a8d Diff:3.81G (27.31Ph/s) Started: [00:08:06]
ST:3 F:0 NB:1 AS:0 BW:[ 8/ 0kB/s] E:0.00 I: 0.00 BTC/hr BS:0
0 | 0.0/ 0.0/ 0.0 h/s | A:0 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
MMQ 0: | DEAD / 0.0/ 0.0 h/s | A:0 R:0+0(none) HW:0/none
--------------------------------------------------------------------------------
[2014-03-07 00:08:00] Started bfgminer 3.10.0
[2014-03-07 00:08:05] Probing for an alive pool
[2014-03-07 00:08:06] Pool 0 is hiding block contents from us
[2014-03-07 00:08:06] Network difficulty changed to 3.81G (27.31Ph/s)
[2014-03-07 00:08:06] Pool 0 http://127.0.0.1:9504 alive
[2014-03-07 00:08:06] No suitable long-poll found for http://127.0.0.1:9504
[2014-03-07 00:08:06] MMQ 0: FPGA not programmed
[2014-03-07 00:08:06] ERROR: Unable to load 'fpgaminer_x6500-overclocker-0402.b
it', required for MMQ 0 to work!
[2014-03-07 00:08:06] ERROR: Please read README.FPGA for instructions
[2014-03-07 00:08:06] MMQ 0 failure, exiting