OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable

[thierry4wd]

yes i know, i also copy the set-miner ....

I understand, you do not have that to do to explain how to do and this is not the subject here;)

I will try your method ... with your application deploy ...


Edit : i try this ... i past the log :

Code:

C:\Users\xxxx\Desktop\Firmware antminer D3 et L3+\Unlock T9+ S9 bmminer>bmminer-deploy.exe
Error loading Python DLL 'C:\Users\xxxx\AppData\Local\Temp\_MEI23962\python36.dll'.
No error messages generated.
FormatMessageW: ParamÞtre incorrect.
LoadLibrary: PyInstaller: FormatMessageW failed.
C:\Users\xxxx\Desktop\Firmware antminer D3 et L3+\Unlock T9+ S9 bmminer>pause

[1715125170]

1715125170

[1715125170]

1715125170

[alex1560]

I would suggest trying in a more friendly path location, without xxx spaces and others. And run the .bat file after setting the config file.
You can place it in D:/bmminer-deploy or something like this, see if you still get an error.

Which windows you run it ? I work with windows 10.

[thierry4wd]

the spaces are the result of the translator (I'm french)
the xxxx are my masked name (I'm stupid lol)

I just decompression in a folder, configure the "ip_list.txt" with the ip address of my minor 192.168.1.xx and inform minerversion = T9 + in the "config.txt"

And run in admin mode the deploy.bat, i run with windows 7 pro

I think the problem comes from your software that will look for the DLL ==> AppData \ Local \ Temp \ _MEI23962 \ python36.dll '

but it does not find it because I do not have it ... and it's not a common file for DLLs ... I'm wrong?

Off topic but a question ... your bmminer-deploy.exe does 8MB? it seems huge to me for simple scrypt ....

[alex1560]

I think the problem is windows 7 not having some libraries to load this. This script is made with python and compiled, it contains all the libraries needed to run ssh commands and python it's self, which is about 7-8 MB,
that's how python gets compiled to run as an .exe .

We plan making this in a different language in case we decide to make this in the end a project to focus on, it will be smaller in size when done in c# or c++.

You can also try running this as Administrator, see if it's doing any difference. Will install a VM in the following days to test on other windows versions, as I am working with win10 and it's where it's compiled on.

[thierry4wd]

Hi, I finally managed to get an S9! and I tried your mod, and for the S9 it works perfectly (I only recover the files)! play well;)

The only downside, the reporter's temperature seems much higher than the reality ... and moreover the fan-fixed operation has been removed?

[alex1560]

Hi, I finally managed to get an S9! and I tried your mod, and for the S9 it works perfectly (I only recover the files)! play well;)

The only downside, the reporter's temperature seems much higher than the reality ... and moreover the fan-fixed operation has been removed?

in my test, I also flash firware S9J on my S9 13.5, and pushing the minor on the frequencies, the kernel displays voltage - 454? at take it will seem that it runs under 900mv I pence, and rises very easily at 16Th;)
But this is only for information;)

[jfaubin]

Hi Alex,
I have problems with s9i 14 TH. The temp chip comme to 99 and 100. Before the update, the temperature is 72 to 74. I restore bmminer.conf, *.cgi files and bmminer executable and the s9 come to 72. Did you have this problems with S9i?

Thanks a lot!

[alex1560]

Hi Alex,
I have problems with s9i 14 TH. The temp chip comme to 99 and 100. Before the update, the temperature is 72 to 74. I restore bmminer.conf, *.cgi files and bmminer executable and the s9 come to 72. Did you have this problems with S9i?

Thanks a lot!

Hi, there have been some issues with newer miners than the source code available on github. I am working now on a version which is going to be compatible with any miner version, including the latest so called "asic boost" low power firmware which is
just released. From what I understand it might be no time soon source code available, so I have found a workaround on setting frequency, voltage and will try disabling fans as well.

I am still trying to figure if there's any asic boost at all in the latest firmware or if it's better power management combined with different algorithm of communication with the pool.. Anways, will keep you updated.

Unfortunately I will be charging for the next firmware update because of the complexity of the task.

Join discord to stay updated : https://discord.gg/VugHH8

Alex

[jfaubin]

I Alex, your dicuss threads not work. Do you gave another new threads? What is your username in discuss?

Hi Alex, do you have an update?

[alex1560]

Hi Alex, do you have an update?

Hi, yes, please send me the firmware which was working for you and will send you a patching file containing that firmware.

[reza312000]

Hi, yes, please send me the firmware which was working for you and will send you a patching file containing that firmware.

I was able to overclock the miner from outside the bmminer, Freq and Voltage. Right now I did it for the Asic Boost firmware from
Bitmain. Here's a link:

http://torrent-miner.com/tools/Antminer-S9-LPM-20181023_OC.tar.gz

I am working on disabling fan check, but for those interested on that, get in touch on discord or PM as that's not going to be released for free.

I used for t9+ but not connect to pool and burn 17 asic😭

[alex1560]

I used for t9+ but not connect to pool and burn 17 asic😭

Hi, sorry to hear that you are having issues, the first firmware deployer is for S9 and T9+, the last update was posted for the user which wanted
to try a different firmware.. Perhaps I should start a new thread to avoid this kind of missunderstandings

[reza312000]

http://s8.picofile.com/file/8340967868/Screenshot_20181026_190430.png

Can i repair?

[alex1560]

http://s8.picofile.com/file/8340967868/Screenshot_20181026_190430.png

Can i repair?

There are some repair shops around, check the forum for that.

The thing is that the s9 firmware should not start the on the T9+, at least the ones I did before, this one is from
bitmain, so maybe they changed stuff..

[alex1560]

thank you works smoothly

You are welcome! I have some users which said it did not work for them, but I think they did not set the voltage for their machine, and some machines won't start with the default set
by bmminer or something.. Trying to figure out what is their issue.

Good luck!

[dutchlincoln]

And what are the results?
Hashrate/freq/power usage?

[thierry4wd]

I try this on my S9 13.5Th, by flashing on interface web.

Freq and asicboost work perfect ! but not voltage ...

I set 700mhz and 900mv and apply , the miner boot correctly at 700mhz but 870mv ...

[alex1560]

I try this on my S9 13.5Th, by flashing on interface web.

Freq and asicboost work perfect ! but not voltage ...

I set 700mhz and 900mv and apply , the miner boot correctly at 700mhz but 870mv ...

Hi, the voltage and freq is being set from outside bmminer on this version because of the closed source code which was not released yet, you are not going to see in the logs of bmminer saying the voltage. You will see a message called Custom Overwrite set pic voltage=%d on chain[%d] where the logs for bmminer starts after it finished booting.

The nice part of this firmware mod is that it should work with any version of bmminer, just replace the single-bard test file (and the interface files) on your regular firmware and is going to overclock voltage and freq, making it
easier for those antminer s9 versions which were not compatible with the open source firmware.

Alex

[thierry4wd]

ha !!! All my excuses, I saw in the kernel that the tenssion did not change, so I did not bother to continue my test: s

On the other hand, after many tests, I am happy to say that I just finished my code which works perfectly , I manage to take the control freq, fan, and tenssion, all with the right temperature card, and everything is well displayed in kernel log !!! I'm happy: p

but your LPM OC deserves that I look more closely !!!, if this is independent of BMMINER, then it should be compatible T9 +? without copying bmminer of corse;) I always try to increase the tenssion on a T9 +;)

[alex1560]

ha !!! All my excuses, I saw in the kernel that the tenssion did not change, so I did not bother to continue my test: s

On the other hand, after many tests, I am happy to say that I just finished my code on "set-miner-config" and "minerconfiguration.cgi" which works perfectly with a BMMINER of ogirine, I manage to take the control freq, fan, and tenssion, all with the right temperature card, and everything is well displayed in kernel log !!! I'm happy: p

but your LPM OC deserves that I look more closely !!!, if this is independent of BMMINER, then it should be compatible T9 +? without copying bmminer of corse;) I always try to increase the tenssion on a T9 +;)

Glad to hear you work on your version as well. Let me know how your version works, it's indeed nice if you can set it just from the minerconfiguration.cgi, I did not check that as there are some funky ways of setting voltage on the PIC. Does your version work with LPM as well ?

Good luck!