OC AsicBoost Antminer S9, T9+ Bmminer - Deploy Tool and access to set freq, volt, Fan Disable

[thierry4wd]

Not LPM ...

I just work a few hours (to find the apel code), the advantage , so compatible with any hashboard (i think),

on the other hand, I tried my mod, but with another BMMINER, but that does not change the tenssion ...

I am currently running a 13.5 to 15.3Th / 1600W / 725mhz / 900mv

[alex1560]

Not LPM ... but I use the last official BMMINER of an S9 without changing it, and he finds, by chance, he accepts the change of tenssion! : d

I just work a few hours (to find the apel code), the advantage is that the BMMINER is the last, so compatible with any hashboard (i think),

on the other hand, I tried my mod, but with another BMMINER, but that does not change the tenssion ...

I am currently running a 13.5 to 15.3Th / 1600W / 725mhz / 900mv

In my tests I was using 675, getting ~14.2 with 1350W and 890mv on a 13.5 old machine on antpool or btc.com, slush doesn't like LPM yet. The wattage varies from machine to machine, mainly
lower Voltages will use less power.

[thierry4wd]

Hi ! i tested your firmware, but i'm sorry din't working for me... only 11 200Gh/s at 725mhz and set 900mv

no subject, i continue to dev my code, and now i'm ready to change voltage by 5mv .... for exemple i tested 885mv, 890mv, 895mv and more ! well done ! perfect working ! and show on kernel log (and verify by my power plug counter)

[alex1560]

Hi ! i tested your firmware, but i'm sorry din't working for me... only 11 200Gh/s at 725mhz and set 900mv

no subject, i continue to dev my code, and now i'm ready to change voltage by 5mv .... for exemple i tested 885mv, 890mv, 895mv and more ! well done ! perfect working ! and show on kernel log (and verify by my power plug counter)

Ya.. it's triky to get it working on some machines, needs debuging when is not working. We usually do a lot of tests for the farms we work with on deploying custom firmware. Good luck with your code! It's always the best to choose the tools that works for your case as what worked for others might not work for you.

[thierry4wd]

yes i agree !! but i using one bmminer original (no compiled by me) , i don't think that problem for other machine (may be i don't reason), on my S9 i tested 7 x bmminer, i try man !!! lol

on the other hand I am disappointed that no more people try your mod on paper it is the best for my taste!

[alex1560]

yes i agree !! but i using one bmminer original (no compiled by me) , i don't think that problem for other machine (may be i don't reason), on my S9 i tested 7 x bmminer, i try man !!! lol

on the other hand I am disappointed that no more people try your mod on paper it is the best for my taste!

Try getting the single-board test from the package and the rest of the files and use your original bmminer with it. Single-board test should be able to overclock any bmminer

About people no trying the mod, probably because I am a newbie on this forum, and there are more established threads with overclocking topic.

Good luck!

[thierry4wd]

Yes, do you think i'm ready to test this mod on T9+ without bmminer ?

[alex1560]

Yes, do you think i'm ready to test this mod on T9+ without bmminer ?

I don't think it will work, single board test was compiled for S9. There are different options for T9+.

[thierry4wd]

Hi, ok it's working I do not test then ...

I have moved forward again, and I have "unblock" the display of the PCB temperature in the minor status instead of "Temp (chip1)" it works well: p

2nd, would it be possible for you to provide a screenshot of an overclocked T9 +? I want to change the tenssion of my T9 +! : p and if you would have a log of the kernel where you can see the tenssion modify?

thank you

[alex1560]

Hi, ok it's working I do not test then ...

I have moved forward again, and I have "unblock" the display of the PCB temperature in the minor status instead of "Temp (chip1)" it works well: p

2nd, would it be possible for you to provide a screenshot of an overclocked T9 +? I want to change the tenssion of my T9 +! : p and if you would have a log of the kernel where you can see the tenssion modify?

thank you

Hi, I do not have any screenshots saved of the kernel logs. You can install on a machine and check it out yourself.

[thierry4wd]

I did it but remember you had to replace my PIC32 making the boards out of use: s

[alex1560]

I did it but remember you had to replace my PIC32 making the boards out of use: s

I think you tried when the tool was not detecting which miner version it is, s9 or t9. The latest one will know which bmminer to copy.

[thierry4wd]

Yes I already did what was needed have already debated theessess;) and I did everything well;) for proof your mod works very well on my S9 (proof that I know the install lol) but not on my T9 + ...

I wanted the kernel log for me, to understand what's wrong;)

[jfaubin]

[...]

Attention!!! S9 only.
http://torrent-miner.com/tools/Antminer-S9-LPM-20181023_OC.tar.gz

[...]

Hi Alex,

This last firmware not work with S9i. Do you have source code on your code? provide-me and i made a correction.

Regards.

J-F Aubin

[alex1560]

Hi Alex,

This last firmware not work with S9i. Do you have source code on your code? provide-me and i made a correction.

Regards.

J-F Aubin

Hi, make sure you flash the original firmware before applying this patch, may users had other overclocking mods which are
not allowing this one to work. You can either reset to factory or flash the autotune version for your miner.

There's no source code for this yet, I was able to disable fan check by modifying binary code and to overclock from the single board test.
Single board test code is available on bitmain github, and you apply same changes that I've applied on my video for bmminer.
The fan disable version is not made public, if offered only paid by PM or discord.

Good luck!

[UknoWho]

Hi Alex  I con't open http：//torrent-miner.com/tools/bmminer-deploy-S9-T9+.zip
Would you please sent a email  including bmminer-deploy-S9-T9+.zip  and Antminer-S9-LPM-20181023_OC.tar.gz
My email q498370658@gmail.com
Thank you 

[alex1560]

Hi Alex  I con't open http：//torrent-miner.com/tools/bmminer-deploy-S9-T9+.zip
Would you please sent a email  including bmminer-deploy-S9-T9+.zip  and Antminer-S9-LPM-20181023_OC.tar.gz
My email q498370658@gmail.com
Thank you 

Hi, I updated the main link as I removed that file from the server, this is the latest deployer: http://torrent-miner.com/tools/Antminer-MassDeployer-v.1.0.zip
and here you can watch a video on how to use:
https://www.youtube.com/watch?v=XkB6ymB01c4

[sergw]

Hi, tested on 3 S9 13.5T, set 675 freq + 8.9V + asic boost, after ~2-3 hours on all miners 2 hashboards droped to 0, and miners run just on 4.5Th, any body faced the same?

[bitcoinore]

Hi, tested on 3 S9 13.5T, set 675 freq + 8.9V + asic boost, after ~2-3 hours on all miners 2 hashboards droped to 0, and miners run just on 4.5Th, any body faced the same?

Same here, seems the firmware is simply not stable for some reason

[sergw]

Same here, seems the firmware is simply not stable for some reason

yep, i had to rollback to original fw.  maybe my S9 from feb-may 2017 batch not tested enough.