⚓[ANN][PIRATE][POW⚔POS]☝[MASTERNODE]☝PIRATECASH ➥ 100% ECO CRYPTOCURRENCY

[piratecash]

LOL, what a strange kind of bounty!
Download, then post address to get free coin from Download bounty.
I will stay away from this one.

Why?  Do you know another way to get PirateAddress?  Unfortunately, the WWW version in progress....

[1714169271]

1714169271

[1714169271]

1714169271

[1714169271]

1714169271

[1714169271]

1714169271

[crypt0sc0pe]

LOL, what a strange kind of bounty!
Download, then post address to get free coin from Download bounty.
I will stay away from this one.

It is the simplest bounty ever. You should only download the wallet https://piratecash.net/en/site/index#download and provide your PIRATE address. That's all!
You can check files on https://www.virustotal.com if you have any doubts.

[mocacinno]

Good luck with your new project... I checked it out and installed it on my sandbox system... I did have 2 remarks tough:

• I couldn't get the sourcecode compiled, so i chose to use the precompiled linux binaries... However, i'm missing some tools here. The tar.gz contains the daemon and the QT, but i'm missing piratecash-cli so i can execute cli commands against a running daemon
• Your website is still talking about running minerd and cpu-mining, i set everything up for a short solo-mine, but at current diff, it's nearly impossible to do this... I guess your network has a couple GPU or ASIC miners, making it nearly impossible to cpu mine. I'd rather see this option removed from your website TBH

For the rest, it looked nice, and i'll probably be following your development

[Nodeasy]

Reserved for translation into Chinese

[piratecash]

Good luck with your new project... I checked it out and installed it on my sandbox system... I did have 2 remarks tough:

• I couldn't get the sourcecode compiled, so i chose to use the precompiled linux binaries... However, i'm missing some tools here. The tar.gz contains the daemon and the QT, but i'm missing piratecash-cli so i can execute cli commands against a running daemon
• Your website is still talking about running minerd and cpu-mining, i set everything up for a short solo-mine, but at current diff, it's nearly impossible to do this... I guess your network has a couple GPU or ASIC miners, making it nearly impossible to cpu mine. I'd rather see this option removed from your website TBH

For the rest, it looked nice, and i'll probably be following your development

Thank you for your feedback.

piratecashd is cli utility too. Without parameters it will run daemon and with it you will see outputs like coinmame-cli (i'll split cli and daemon in future realises)

yes, now there are already ASIC's since this algorithm has been around for a long time already, but PoW will be disabled after 120 days (after 100,000 block). You can use mining pools for joing mining if you want PoW. The documentation for PoW mining will be removed after 100,000 block.

p.s./ Please fill the form and 2018-12-01 i'll send second baunty from http://block.piratecash.net:3001/address/PApM8upKg8xcHGFi4mZVNPp5eB8kx3vgmN to all who filled the form http://l2u.su/qbnH

[mocacinno]

--snip--

piratecashd is cli utility too. Without parameters it will run daemon and with it you will see outputs like coinmame-cli (i'll split cli and daemon in future realises)

--snip--

Are you sure? running piratecashd --help gives the following output:

./piratecashd --help
Piratecash version v1.0.1.3-60010

Usage:
  piratecashd [options]
  piratecashd [options] <command> [params]  Send command to -server or piratecashd
  piratecashd [options] help                List commands
  piratecashd [options] help <command>      Get help for a command

Options:
  -?                     This help message
  -conf=<file>           Specify configuration file (default: piratecash.conf)
  -pid=<file>            Specify pid file (default: piratecashd.pid)
  -datadir=<dir>         Specify data directory
  -wallet=<dir>          Specify wallet file (within data directory)
  -dbcache=<n>           Set database cache size in megabytes (default: 10)
  -dbwalletcache=<n>     Set wallet database cache size in megabytes (default: 1)
  -dblogsize=<n>         Set database disk log size in megabytes (default: 100)
  -timeout=<n>           Specify connection timeout in milliseconds (default: 5000)
  -proxy=<ip:port>       Connect through SOCKS5 proxy
  -tor=<ip:port>         Use proxy to reach tor hidden services (default: same as -proxy)
  -dns                   Allow DNS lookups for -addnode, -seednode and -connect
  -port=<port>           Listen for connections on <port> (default: 23232)
  -maxconnections=<n>    Maintain at most <n> connections to peers (default: 125)
  -addnode=<ip>          Add a node to connect to and attempt to keep the connection open
  -connect=<ip>          Connect only to the specified node(s)
  -seednode=<ip>         Connect to a node to retrieve peer addresses, and disconnect
  -externalip=<ip>       Specify your own public address
  -onlynet=<net>         Only connect to nodes in network <net> (IPv4, IPv6 or Tor)
  -discover              Discover own IP address (default: 1 when listening and no -externalip)
  -irc                   Find peers using internet relay chat (default: 0)
  -listen                Accept connections from outside (default: 1 if no -proxy or -connect)
  -bind=<addr>           Bind to given address. Use [host]:port notation for IPv6
  -dnsseed               Query for peer addresses via DNS lookup, if low on addresses (default: 1 unless -connect)
  -forcednsseed          Always query for peer addresses via DNS lookup (default: 0)
  -synctime              Sync time with other nodes. Disable if time on your system is precise e.g. syncing with NTP (default: 1)
  -banscore=<n>          Threshold for disconnecting misbehaving peers (default: 100)
  -bantime=<n>           Number of seconds to keep misbehaving peers from reconnecting (default: 86400)
  -maxreceivebuffer=<n>  Maximum per-connection receive buffer, <n>*1000 bytes (default: 5000)
  -maxsendbuffer=<n>     Maximum per-connection send buffer, <n>*1000 bytes (default: 1000)
  -upnp                  Use UPnP to map the listening port (default: 0)
  -paytxfee=<amt>        Fee per KB to add to transactions you send
  -mininput=<amt>        When creating transactions, ignore inputs with value less than this (default: 0.01)
  -testnet               Use the test network
  -debug=<category>      Output debugging information (default: 0, supplying <category> is optional)
If <category> is not supplied, output all debugging information.
<category> can be: addrman, alert, db, lock, rand, rpc, selectcoins, mempool, net, coinage, coinstake, creation, stakemodifier.
  -logtimestamps         Prepend debug output with timestamp
  -shrinkdebugfile       Shrink debug.log file on client startup (default: 1 when no -debug)
  -printtoconsole        Send trace/debug info to console instead of debug.log file
  -regtest               Enter regression test mode, which uses a special chain in which blocks can be solved instantly. This is intended for regression testing tools and app development.
  -rpcuser=<user>        Username for JSON-RPC connections
  -rpcpassword=<pw>      Password for JSON-RPC connections
  -rpcport=<port>        Listen for JSON-RPC connections on <port> (default: 3535)
  -rpcallowip=<ip>       Allow JSON-RPC connections from specified IP address
  -rpcconnect=<ip>       Send commands to node running on <ip> (default: 127.0.0.1)
  -rpcwait               Wait for RPC server to start
  -rpcthreads=<n>        Set the number of threads to service RPC calls (default: 4)
  -blocknotify=<cmd>     Execute command when the best block changes (%s in cmd is replaced by block hash)
  -walletnotify=<cmd>    Execute command when a wallet transaction changes (%s in cmd is replaced by TxID)
  -confchange            Require a confirmations for change (default: 0)
  -alertnotify=<cmd>     Execute command when a relevant alert is received (%s in cmd is replaced by message)
  -upgradewallet         Upgrade wallet to latest format
  -createwalletbackups=<n> Number of automatic wallet backups (default: 10)
  -keypool=<n>           Set key pool size to <n> (default: 100) (litemode: 10)
  -rescan                Rescan the block chain for missing wallet transactions
  -salvagewallet         Attempt to recover private keys from a corrupt wallet.dat
  -checkblocks=<n>       How many blocks to check at startup (default: 500, 0 = all)
  -checklevel=<n>        How thorough the block verification is (0-6, default: 1)
  -loadblock=<file>      Imports blocks from external blk000?.dat file
  -maxorphanblocks=<n>   Keep at most <n> unconnectable blocks in memory (default: 750)

Block creation options:
  -blockminsize=<n>      Set minimum block size in bytes (default: 0)
  -blockmaxsize=<n>      Set maximum block size in bytes (default: 250000)
  -blockprioritysize=<n> Set maximum size of high-priority/low-fee transactions in bytes (default: 27000)

SSL options: (see the Bitcoin Wiki for SSL setup instructions)
  -rpcssl                                  Use OpenSSL (https) for JSON-RPC connections
  -rpcsslcertificatechainfile=<file.cert>  Server certificate file (default: server.cert)
  -rpcsslprivatekeyfile=<file.pem>         Server private key (default: server.pem)
  -rpcsslciphers=<ciphers>                 Acceptable ciphers (default: TLSv1.2+HIGH:TLSv1+HIGH:!SSLv3:!SSLv2:!aNULL:!eNULL:!3DES:@STRENGTH)
  -litemode=<n>          Disable all Darksend and Stealth Messaging related functionality (0-1, default: 0)

Masternode options:
  -masternode=<n>            Enable the client to act as a masternode (0-1, default: 0)
  -mnconf=<file>             Specify masternode configuration file (default: masternode.conf)
  -mnconflock=<n>            Lock masternodes from masternode configuration file (default: 1)
  -masternodeprivkey=<n>     Set the masternode private key
  -masternodeaddr=<n>        Set external address:port to get to this masternode (example: address:port)
  -masternodeminprotocol=<n> Ignore masternodes less than version (example: 61401; default : 0)

Darksend options:
  -enabledarksend=<n>          Enable use of automated darksend for funds stored in this wallet (0-1, default: 0)
  -darksendrounds=<n>          Use N separate masternodes to anonymize funds  (2-8, default: 2)
  -anonymizepiratecashamount=<n> Keep N Piratecash anonymized (default: 0)
  -liquidityprovider=<n>       Provide liquidity to Darksend by infrequently mixing coins on a continual basis (0-100, default: 0, 1=very frequent, high fees, 100=very infrequent, low fees)

InstantX options:
  -enableinstantx=<n>    Enable instantx, show confirmations for locked transactions (bool, default: true)
  -instantxdepth=<n>     Show N confirmations for a successfully locked transaction (0-9999, default: 10)
Secure messaging options:
  -nosmsg                                  Disable secure messaging.
  -debugsmsg                               Log extra debug messages.
  -smsgscanchain                           Scan the block chain for public key addresses on startup.

to be honest, these look like standard daemon startup options, i don't see any info on how to run 'common' cli commands like creating new addresses, sending funds, looking at the mempool or the outputs,...

[piratecash]

Are you sure? running piratecashd --help gives the following output:


to be honest, these look like standard daemon startup options, i don't see any info on how to run 'common' cli commands like creating new addresses, sending funds, looking at the mempool or the outputs,...

piratecashd help
addmultisigaddress nrequired ["key",...] ( "account" )
addnode <node> <add|remove|onetry>
addredeemscript <redeemScript> [account]
backupwallet "destination"
checkkernel [{"txid":txid,"vout":n},...] [createblocktemplate=false]
checkwallet
clearbanned
createmultisig nrequired ["key",...]
createrawtransaction [{"txid":txid,"vout":n},...] {address:amount,...}
darksend <piratecashaddress> <amount>
decoderawtransaction <hex string>
decodescript <hex string>
dumpprivkey <piratecashaddress>
dumpwallet <filename>
getaccount "piratecashaddress"
getaccountaddress "account"
getaddednodeinfo <dns> [node]
getaddressesbyaccount "account"
getbalance ( "account" minconf includeWatchonly )
getbestblockhash
getblock <hash> [txinfo]
getblockbynumber <number> [txinfo]
getblockcount
getblockhash <index>
getblocktemplate [params]
getcheckpoint
getconnectioncount
getdifficulty
getinfo
getmininginfo
getnettotals
getnewaddress ( "account" )
getnewpubkey [account]
getnewstealthaddress [label]
getpeerinfo
getrawmempool
getrawtransaction <txid> [verbose=0]
getreceivedbyaccount "account" ( minconf )
getreceivedbyaddress "piratecashaddress" ( minconf )
getstakesubsidy <hex string>
getstakinginfo
getsubsidy [nTarget]
gettransaction "txid" ( includeWatchonly )
getwork [data]
getworkex [data, coinbase]
help [command]
importaddress "address" ( "label" rescan )
importprivkey <piratecashprivkey> [label] [rescan=true]
importstealthaddress <scan_secret> <spend_secret> [label]
importwallet <filename>
keypoolrefill ( newsize )
listaccounts ( minconf includeWatchonly)
listaddressgroupings
listbanned
listreceivedbyaccount ( minconf includeempty includeWatchonly)
listreceivedbyaddress ( minconf includeempty includeWatchonly)
listsinceblock ( "blockhash" target-confirmations includeWatchonly)
liststealthaddresses [show_secrets=0]
listtransactions ( "account" count from includeWatchonly)
listunspent [minconf=1] [maxconf=9999999]  ["address",...]
makekeypair [prefix]
masternode "command"... ( "passphrase" )
masternodelist ( "mode" "filter" )
move "fromaccount" "toaccount" amount ( minconf "comment" )
ping
repairwallet
resendtx
reservebalance [<reserve> [amount]]
scanforalltxns [fromHeight]
scanforstealthtxns [fromHeight]
searchrawtransactions <address> [verbose=1] [skip=0] [count=100]
sendalert <message> <privatekey> <minver> <maxver> <priority> <id> [cancelupto]
sendfrom "fromaccount" "topiratecashaddress" amount ( minconf "comment" "comment-to" )
sendmany "fromaccount" {"address":amount,...} ( minconf "comment" )
sendrawtransaction <hex string>
sendtoaddress "piratecashaddress" amount ( "comment" "comment-to" )
sendtostealthaddress <stealth_address> <amount> [comment] [comment-to] [narration]
setaccount "piratecashaddress" "account"
setban "ip(/netmask)" "add|remove" (bantime) (absolute)
settxfee amount
signmessage "piratecashaddress" "message"
signrawtransaction <hex string> [{"txid":txid,"vout":n,"scriptPubKey":hex,"redeemScript":hex},...] [<privatekey1>,...] [sighashtype="ALL"]
smsgaddkey <address> <pubkey>
smsgbuckets [stats|dump]
smsgdisable
smsgenable
smsggetpubkey <address>
smsginbox [all|unread|clear]
smsglocalkeys [whitelist|all|wallet|recv <+/-> <address>|anon <+/-> <address>]
smsgoptions [list|set <optname> <value>]
smsgoutbox [all|clear]
smsgscanbuckets
smsgscanchain
smsgsend <addrFrom> <addrTo> <message>
smsgsendanon <addrTo> <message>
spork <name> [<value>]
stop
submitblock <hex data> [optional-params-obj]
validateaddress <piratecashaddress>
validatepubkey <piratecashpubkey>
verifymessage <piratecashaddress> <signature> <message>
walletlock
walletpassphrase "passphrase" timeout ( anonymizeonly )
walletpassphrasechange "oldpassphrase" "newpassphrase"

From --help output
piratecashd [options] <command> [params]  Send command to -server or piratecashd

you need specify help without --

[Batus]

What do you mean by saying that your token is an eco cryptocurrency? Please add this to the first post of your thread.

after 100 000 blocks, the PoW will be disabled and this network will nor require BIG power and it will  ASIC resistant

Before 100 000 block ASIC owners will mine so huge qtty of Pirate Coin that price will be dumped from beginning

[piratecash]

What do you mean by saying that your token is an eco cryptocurrency? Please add this to the first post of your thread.

after 100 000 blocks, the PoW will be disabled and this network will nor require BIG power and it will  ASIC resistant

Before 100 000 block ASIC owners will mine so huge qtty of Pirate Coin that price will be dumped from beginning

no, the PoW reward is 10 PIRATE and PoS reward 50 Pirate (60% to Masternode and 40% to Staker).

[mocacinno]

From --help output
piratecashd [options] <command> [params]  Send command to -server or piratecashd

you need specify help without --

Got it now... It works, thanks!

[luksbit]

Is it that being ecological, POW mining can not divert these characteristics from the project? Because mining POW spends a lot of electricity

[crypt0sc0pe]

Is it that being ecological, POW mining can not divert these characteristics from the project? Because mining POW spends a lot of electricity

What do you mean by saying that your token is an eco cryptocurrency? Please add this to the first post of your thread.

after 100 000 blocks, the PoW will be disabled and this network will nor require BIG power and it will  ASIC resistant

Before 100 000 block ASIC owners will mine so huge qtty of Pirate Coin that price will be dumped from beginning

no, the PoW reward is 10 PIRATE and PoS reward 50 Pirate (60% to Masternode and 40% to Staker).

Exactly!  The best way to mine PIRATE is to buy some coins on exchange and start POS mining* immediately. You don't need to use any expensive hardware and spend electrical power.

*NOTE

1. POW mining only until 100.000 block
2. Total coin supply ~105M PIRATE
3. Don't forget to unlock your wallet https://piratecash.net/en/site/quickstart#staking

[piratecash]

Is it that being ecological, POW mining can not divert these characteristics from the project? Because mining POW spends a lot of electricity

yes, it's main idea to decrease usage electricity and PoW is need only for start this project (4-5 month). Also, it isn't all freatures here. Pirate is money for internal ecosystem and it will be used for services

[gades]

Any pools for the coin?

we have 3 pools

Bitcoin-Pool.de is ready for Mining !
We are online 24/7
0.9% Fee







Algo: scrypt

Code:

stratum+tcp://bitcoin-pool.de:3433 -u YOUR_WALLET_ADDRESS -p c=PIRATE or d=8192 (your diff) 

PirateCash

https://pool.blockhunter.info

-o stratum+tcp://pool.blockhunter.info:3433 -u <PIRATECASH_WALLET_ADDRESS> [-p c=PIRATE]

Pool Fee 0,5%
Payout Hourly

pool  Pirate cash coin  https://smithpool.net

conf for miners (-a scrypt -o stratum+tcp://smithpool.dynu.net:3433 -u yourwalletaddress -p c=PIRATE)

conf for miners high difficulty(-a scrypt -o stratum+tcp://smithpool.dynu.net:33433 -u yourwalletaddress -p c=PIRATE)

for high difficulty  nicehash or miningrigrental add only  ,d =your diff or port dedicate 33433

example -a scrypt -o stratum+tcp://smithpool.dynu.net:3433 -u yourwalletaddress -p c=PIRATE,d=65000  or whatever you want

block explorer https://smithpool.net/explorer/PIRATE
 
discord support and coin request  https://discord.gg/Zy5esd6


low fee .... good job

Links | Website | Support | Project
http://bitcoin-pool.de
https://discord.gg/ZsSUb5F
https://bitcointalk.org/index.php?topic=2817561.0

[gades]

Pirate has been added to the site http://newcoinann.info/

[kexukamugu]

I still can mining do solo this coin?

[piratecash]

I still can mining do solo this coin?

yes, but you need ASIC 19.7512 Network (GH/s). I didn't expect that the PoW is still actual and PoW will be disabled after 100 000 block.

[wovomel]

Do you need translation

[yiyosawese]

where will there be a pool? How many current node is active? Do you have plans for any exchange?

[crypt0sc0pe]

where will there be a pool? How many current node is active? Do you have plans for any exchange?

Please read the Open Post carefully, there is all necessary information. Also you can join PirateCash telegram chat https://t.me/joinchat/FtUaLREioKVyF6EPNVtnIQ and discord https://discord.gg/cbTdqxx

Stay tuned. More great features are coming.