AngusCanine (OP)
Legendary
 Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
 |
March 31, 2014, 12:28:33 AM |
|
Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Looks like your router is set to 192.168.2.x Do you have access to your router? You have to change the router to 192.168.1.x in order to access to the antminer. I have access to s1 those values are the s1's new address and my mining pool, funny enough ive switched pcie's and the green led on out side of miner on the board came back on. but still not hashing pools alive, zero hash rate |
|
|
|
|
|
cxboyminer
|
|
March 31, 2014, 02:15:32 AM |
|
Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Looks like your router is set to 192.168.2.x Do you have access to your router? You have to change the router to 192.168.1.x in order to access to the antminer. I have access to s1 those values are the s1's new address and my mining pool, funny enough ive switched pcie's and the green led on out side of miner on the board came back on. but still not hashing pools alive, zero hash rate NTP problem? maybe... |
|
|
|
AngusCanine (OP)
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 31, 2014, 03:52:12 AM |
|
Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Looks like your router is set to 192.168.2.x Do you have access to your router? You have to change the router to 192.168.1.x in order to access to the antminer. I have access to s1 those values are the s1's new address and my mining pool, funny enough ive switched pcie's and the green led on out side of miner on the board came back on. but still not hashing pools alive, zero hash rate NTP problem? maybe... define ntp im not familiar with it? |
|
|
|
|
|
ChuckBuck
|
|
March 31, 2014, 04:02:29 AM |
|
Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Hey Angus, try taking out the stratum+tcp:// Just enter pool.webcoin.us:3388 then hit Apply and Save. |
|
|
|
|
cxboyminer
|
|
March 31, 2014, 05:07:32 AM |
|
Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Hey Angus, try taking out the stratum+tcp:// Just enter pool.webcoin.us:3388 then hit Apply and Save. stratum+tcp:// is irrelevant to the problem. I think it's his internet's problem. My assumption is that the ant lost internet connection -> causes the green light to blink. I have stratum+tcp:// on my 3 pool addresses and my lovely little ant works fine! |
|
|
|
|
ChuckBuck
|
|
March 31, 2014, 05:14:19 AM |
|
Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Hey Angus, try taking out the stratum+tcp:// Just enter pool.webcoin.us:3388 then hit Apply and Save. stratum+tcp:// is irrelevant to the problem. I think it's his internet's problem. My assumption is that the ant lost internet connection -> causes the green light to blink. I have stratum+tcp:// on my 3 pool addresses and my lovely little ant works fine! Looks like pool settings/issue or something if he has getworks. I think Angus should try a bigger pool just to test. Try BTCGuild or Eligius to see if it makes any difference. |
|
|
|
|
cxboyminer
|
|
March 31, 2014, 10:12:21 AM |
|
NTP is the time syncronisation. If you go to system -> system. You will see the time syncronisation box. Try disable it. Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Hey Angus, try taking out the stratum+tcp:// Just enter pool.webcoin.us:3388 then hit Apply and Save. stratum+tcp:// is irrelevant to the problem. I think it's his internet's problem. My assumption is that the ant lost internet connection -> causes the green light to blink. I have stratum+tcp:// on my 3 pool addresses and my lovely little ant works fine! Looks like pool settings/issue or something if he has getworks. I think Angus should try a bigger pool just to test. Try BTCGuild or Eligius to see if it makes any difference. Pool could be a problem. |
|
|
|
AngusCanine (OP)
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 31, 2014, 12:30:55 PM |
|
Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Hey Angus, try taking out the stratum+tcp:// Just enter pool.webcoin.us:3388 then hit Apply and Save. works either way |
|
|
|
|
AngusCanine (OP)
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 31, 2014, 12:34:05 PM |
|
NTP is the time syncronisation. If you go to system -> system. You will see the time syncronisation box. Try disable it. Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Hey Angus, try taking out the stratum+tcp:// Just enter pool.webcoin.us:3388 then hit Apply and Save. stratum+tcp:// is irrelevant to the problem. I think it's his internet's problem. My assumption is that the ant lost internet connection -> causes the green light to blink. I have stratum+tcp:// on my 3 pool addresses and my lovely little ant works fine! Looks like pool settings/issue or something if he has getworks. I think Angus should try a bigger pool just to test. Try BTCGuild or Eligius to see if it makes any difference. Pool could be a problem. I tried slushes pool , I reset the miner and tried letting it mine the antpools from bitmain its all thesame |
|
|
|
|
|
ChuckBuck
|
|
March 31, 2014, 12:37:07 PM |
|
NTP is the time syncronisation. If you go to system -> system. You will see the time syncronisation box. Try disable it. Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Hey Angus, try taking out the stratum+tcp:// Just enter pool.webcoin.us:3388 then hit Apply and Save. stratum+tcp:// is irrelevant to the problem. I think it's his internet's problem. My assumption is that the ant lost internet connection -> causes the green light to blink. I have stratum+tcp:// on my 3 pool addresses and my lovely little ant works fine! Looks like pool settings/issue or something if he has getworks. I think Angus should try a bigger pool just to test. Try BTCGuild or Eligius to see if it makes any difference. Pool could be a problem. I tried slushes pool , I reset the miner and tried letting it mine the antpools from bitmain its all thesame Try BTCGuild or Eligius. |
|
|
|
AngusCanine (OP)
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 31, 2014, 01:29:12 PM |
|
NTP is the time syncronisation. If you go to system -> system. You will see the time syncronisation box. Try disable it. Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
I don't think its the config pool says its alive but no hashrate and the green light on the side of miner is not lit up. my wan set up 192.168.2.35 ipv4 255.255.255.0 netmask 192.168.2.1 default gateway 192.168.2.255 ipv4 broadcast 8.8.8.8 custom dns server miner config stratum+tcp://pool.webcoin.us:3388 AngusCanine.Jason 1234 Hey Angus, try taking out the stratum+tcp:// Just enter pool.webcoin.us:3388 then hit Apply and Save. stratum+tcp:// is irrelevant to the problem. I think it's his internet's problem. My assumption is that the ant lost internet connection -> causes the green light to blink. I have stratum+tcp:// on my 3 pool addresses and my lovely little ant works fine! Looks like pool settings/issue or something if he has getworks. I think Angus should try a bigger pool just to test. Try BTCGuild or Eligius to see if it makes any difference. Pool could be a problem. I tried slushes pool , I reset the miner and tried letting it mine the antpools from bitmain its all thesame Try BTCGuild or Eligius. wifes hijacking computer for an hour but wil try one of those after |
|
|
|
|
|
cxboyminer
|
|
March 31, 2014, 01:45:17 PM |
|
Have you disabled the NTP?
|
|
|
|
AngusCanine (OP)
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 31, 2014, 02:37:57 PM |
|
Have you disabled the NTP?
disabled now what to do? |
|
|
|
|
AngusCanine (OP)
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
March 31, 2014, 04:42:18 PM |
|
Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
ok I figured out how to take a screen shot but cant figure out how to post it I copy the img from pictures then select insert img but no option to paste its like I didn't copy it |
|
|
|
|
|
ChuckBuck
|
|
March 31, 2014, 04:54:04 PM |
|
After taking screenshot with your laptop, upload to imgur.com, then post image link here surrounded by the insert img link.
|
|
|
|
phort6n2
Newbie
Offline
Activity: 22
Merit: 0
|
|
March 31, 2014, 07:23:23 PM |
|
well, for those wondering whether it is safe or not, i purchased my antminer on a saturday... sent an email and received no response (no email from purchase nor when its shipped nothing), however, monday was shipped, and by wednesday/thursday was at my house.
it's been working for the past 2hr~ at steady 178GH/s (no overclock) w a 750corsaircm... all good, recommended...
I ordered an Antminer S1 this past Saturday (3/29) and today (3/31) my status shows as "shipped." UPS tracking shows that it should be here Wednesday from China. That's pretty fast! |
|
|
|
|
AngusCanine (OP)
Legendary
Offline
Activity: 1414
Merit: 1001
To weird to live To rare to die
|
|
April 01, 2014, 02:01:13 AM |
|
Hey Angus,
Post a screenshot of your miner configuration and wan interface configuration so we can help you here.
Chuck
ok I figured out how to take a screen shot but cant figure out how to post it I copy the img from pictures then select insert img but no option to paste its like I didn't copy it posted those configs here https://bitcointalk.org/index.php?topic=344970.msg6011060#msg6011060 |
|
|
|
|
|
skleven
|
|
April 01, 2014, 04:45:18 PM |
|
Is it normal that orders is marked as expired an hour after payment?  |
|
|
|
|
|
Benny1985
|
|
April 01, 2014, 04:56:43 PM |
|
What's going on with U2 purchases? I am trying to place an order for them, and they aren't letting me buy.
|
|
|
|
|
hurricandave
Legendary
Offline
Activity: 966
Merit: 1003
|
|
April 01, 2014, 05:53:16 PM |
|
Is it normal that orders is marked as expired an hour after payment? Yes, blockchain.info is the API for Bitmain, it is slow in reporting to Bitmain's payment site and often product ships before the site ever updates the status. |
|
|
|
|
|
