SJSMiner (OP)
Newbie
 Offline
Activity: 18
Merit: 0
|
 |
January 25, 2019, 10:30:31 PM
Last edit: January 26, 2019, 12:29:49 AM by frodocooper |
|
no xxx [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000308] ps7-ttc #0 at df804000, irq=43
[ 0.000621] Console: colour dummy device 80x30
[ 0.000654] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[ 0.040208] pid_max: default: 32768 minimum: 301
[ 0.040438] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.040458] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.042644] CPU: Testing write buffer coherency: ok
[ 0.042992] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.043054] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.043275] L310 cache controller enabled
[ 0.043295] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.121037] CPU1: Booted secondary processor
[ 0.210228] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.210360] Brought up 2 CPUs
[ 0.210379] SMP: Total of 2 processors activated.
[ 0.210387] CPU: All CPU(s) started in SVC mode.
[ 0.211060] devtmpfs: initialized
[ 0.213489] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.214742] regulator-dummy: no parameters
[ 0.223738] NET: Registered protocol family 16
[ 0.226008] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.228343] cpuidle: using governor ladder
[ 0.228357] cpuidle: using governor menu
[ 0.235869] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.237414] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.237428] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.237548] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.259806] bio: create slab <bio-0> at 0
[ 0.261770] vgaarb: loaded
[ 0.262498] SCSI subsystem initialized
[ 0.263381] usbcore: registered new interface driver usbfs
[ 0.263552] usbcore: registered new interface driver hub
[ 0.263780] usbcore: registered new device driver usb
[ 0.264310] media: Linux media interface: v0.10
[ 0.264467] Linux video capture interface: v2.00
[ 0.264717] pps_core: LinuxPPS API ver. 1 registered
[ 0.264729] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.264855] PTP clock support registered
[ 0.265211] EDAC MC: Ver: 3.0.0
[ 0.266264] Advanced Linux Sound Architecture Driver Initialized.
[ 0.269252] DMA-API: preallocated 4096 debug entries
[ 0.269268] DMA-API: debugging enabled by kernel config
[ 0.269350] Switched to clocksource arm_global_timer
[ 0.289430] NET: Registered protocol family 2
[ 0.290113] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.290171] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.290257] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.290306] TCP: reno registered
[ 0.290324] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290357] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.290606] NET: Registered protocol family 1
[ 0.290936] RPC: Registered named UNIX socket transport module.
[ 0.290948] RPC: Registered udp transport module.
[ 0.290957] RPC: Registered tcp transport module.
[ 0.290965] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.290978] PCI: CLS 0 bytes, default 64
[ 0.291428] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.293530] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.295747] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.295944] msgmni has been set to 967
[ 0.296751] io scheduler noop registered
[ 0.296765] io scheduler deadline registered
[ 0.296803] io scheduler cfq registered (default)
[ 0.304755] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.304777] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.430127] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 0.997890] console [ttyPS0] enabled
[ 1.002182] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.009871] [drm] Initialized drm 1.1.0 20060810
[ 1.027113] brd: module loaded
[ 1.036541] loop: module loaded
[ 1.046188] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.052303] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.060147] libphy: XEMACPS mii bus: probed
[ 1.064520] ------------- phy_id = 0x3625e62
[ 1.069262] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.078022] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.084724] ehci-pci: EHCI PCI platform driver
[ 1.092023] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.098840] usbcore: registered new interface driver usb-storage
[ 1.105774] mousedev: PS/2 mouse device common for all mice
[ 1.111925] i2c /dev entries driver
[ 1.118845] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.124396] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.130308] Xilinx Zynq CpuIdle Driver started
[ 1.135172] sdhci: Secure Digital Host Controller Interface driver
[ 1.141311] sdhci: Copyright(c) Pierre Ossman
[ 1.145606] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.152492] mmc0: no vqmmc regulator found
[ 1.156502] mmc0: no vmmc regulator found
[ 1.199369] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.208056] usbcore: registered new interface driver usbhid
[ 1.213573] usbhid: USB HID core driver
[ 1.218297] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.224601] nand: Micron MT29F2G08ABAEAWP
[ 1.228564] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.234510] Bad block table found at page 131008, version 0x01
[ 1.240738] Bad block table found at page 130944, version 0x01
[ 1.246797] 3 ofpart partitions found on MTD device pl353-nand
[ 1.252582] Creating 3 MTD partitions on "pl353-nand":
[ 1.257671] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.265769] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.273110] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.282123] TCP: cubic registered
[ 1.285358] NET: Registered protocol family 17
[ 1.290081] Registering SWP/SWPB emulation handler
[ 1.295996] regulator-dummy: disabling
[ 1.300399] UBI: attaching mtd1 to ubi0
[ 1.832351] UBI: scanning is finished
[ 1.844100] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.851181] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.857923] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.864626] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.871485] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.877453] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.884585] UBI: max/mean erase counter: 16/9, WL threshold: 4096, image sequence number: 862493722
[ 1.893615] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.902833] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.902838] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.906878] ALSA device list:
[ 1.906882] No soundcards found.
[ 1.923312] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.988112] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 1.994068] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.003171] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.013055] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.018084] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 2A24A8E1-2021-4A54-8A4E-D8E294AE00E5, small LPT model
[ 2.029698] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.036672] devtmpfs: mounted
[ 2.039803] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.879101] random: dd urandom read with 0 bits of entropy available
[ 3.279394]
[ 3.279394] bcm54xx_config_init
[ 3.889392]
[ 3.889392] bcm54xx_config_init
[ 7.890223] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.896332] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 22.502192] In axi fpga driver!
[ 22.505260] request_mem_region OK!
[ 22.508650] AXI fpga dev virtual address is 0xdf9fc000
[ 22.513795] *base_vir_addr = 0xc510
[ 22.529132] In fpga mem driver!
[ 22.532202] request_mem_region OK!
[ 22.535773] fpga mem virtual address is 0xe2000000
[ 23.338768]
[ 23.338768] bcm54xx_config_init
[ 23.968685]
[ 23.968685] bcm54xx_config_init
[ 27.969136] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 27.975239] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 332.394257] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=8000c510
miner ID : 80504d2815408814
Miner Type = T9+
AsicType = 1387
real AsicNum = 18
use critical mode to search freq...
get PLUG ON=0x07003f0e
Find hashboard on Chain[1]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Find hashboard on Chain[8]
Find hashboard on Chain[9]
Find hashboard on Chain[10]
Find hashboard on Chain[11]
Find hashboard on Chain[12]
Find hashboard on Chain[13]
set_reset_allhashboard = 0x0000ffff
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[1] has freq in PIC and will jump over...
Chain[1] has core num in PIC
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xaa 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[2] has freq in PIC and will jump over...
Chain[2] has core num in PIC
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
has freq in PIC, will disable freq setting.
chain[3] has freq in PIC and will jump over...
Chain[3] has core num in PIC
has freq in PIC, will disable freq setting.
chain[8] has freq in PIC and will jump over...
Chain[8] has core num in PIC
has freq in PIC, will disable freq setting.
chain[9] has freq in PIC and will jump over...
Chain[9] has core num in PIC
has freq in PIC, will disable freq setting.
chain[10] has freq in PIC and will jump over...
Chain[10] has core num in PIC
has freq in PIC, will disable freq setting.
chain[11] has freq in PIC and will jump over...
Chain[11] has core num in PIC
has freq in PIC, will disable freq setting.
chain[12] has freq in PIC and will jump over...
Chain[12] has core num in PIC
has freq in PIC, will disable freq setting.
chain[13] has freq in PIC and will jump over...
Chain[13] has core num in PIC
get PIC voltage=1 on chain[1], value=930
get PIC voltage=1 on chain[2], value=930
get PIC voltage=1 on chain[3], value=930
get PIC voltage=1 on chain[8], value=930
get PIC voltage=1 on chain[9], value=930
get PIC voltage=1 on chain[10], value=930
get PIC voltage=1 on chain[11], value=930
get PIC voltage=1 on chain[12], value=930
get PIC voltage=1 on chain[13], value=930
set_reset_allhashboard = 0x00000000
chain[8] temp offset record: 1,2,0,0,0,0,33,28
chain[8] temp chip I2C addr=0x98
chain[10] temp offset record: 1,-1,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
chain[12] temp offset record: 1,4,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 9, total chain num = 9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 2571 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=22262 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found= 9298 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=28994 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=16077 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = T9+
Miner compile time: Fri Nov 24 23:19:16 EST 2017 type: Antminer T9+set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80504d2815408814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[5] speed=5880
get fan[2] speed=5760
get fan[5] speed=5880
get fan[2] speed=5760
get fan[5] speed=5880
chain[1] PIC jump to app
Check chain[1] PIC fw version=0x90
Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J2] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J2] test patten OK temp=-1
chain[2] PIC jump to app
Check chain[2] PIC fw version=0x90
Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xaa 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J3] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J3] test patten OK temp=-1
chain[3] PIC jump to app
Check chain[3] PIC fw version=0x90
Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
Chain[J4] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J4] test patten OK temp=-1
Chain[J9] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J9] test patten OK temp=-1
Chain[J10] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J10] test patten OK temp=-1
Chain[J11] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J11] test patten OK temp=-1
Chain[J12] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J12] test patten OK temp=-1
Chain[J13] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J13] test patten OK temp=-1
Chain[J14] has backup chain_voltage=870
Detect: use voltage limit rules on single board!
Detect: T9+ use voltage level=1
Chain[J14] test patten OK temp=-1
Chain[J2] will use voltage=930 [1] to open core
Chain[J3] will use voltage=930 [1] to open core
Chain[J4] will use voltage=930 [1] to open core
Chain[J9] will use voltage=930 [1] to open core
Chain[J10] will use voltage=930 [1] to open core
Chain[J11] will use voltage=930 [1] to open core
Chain[J12] will use voltage=930 [1] to open core
Chain[J13] will use voltage=930 [1] to open core
Chain[J14] will use voltage=930 [1] to open core
Chain[J2] orignal chain_voltage_pic=11 value=870
Chain[J3] orignal chain_voltage_pic=11 value=870
Chain[J4] orignal chain_voltage_pic=11 value=870
Chain[J9] orignal chain_voltage_pic=1 value=930
Chain[J9] will use backup chain_voltage_pic=870 [11]
Chain[J9] get working chain_voltage_pic=11
Chain[J10] orignal chain_voltage_pic=1 value=930
Chain[J10] will use backup chain_voltage_pic=870 [11]
Chain[J10] get working chain_voltage_pic=11
Chain[J11] orignal chain_voltage_pic=1 value=930
Chain[J11] will use backup chain_voltage_pic=870 [11]
Chain[J11] get working chain_voltage_pic=11
Chain[J12] orignal chain_voltage_pic=1 value=930
Chain[J12] will use backup chain_voltage_pic=870 [11]
Chain[J12] get working chain_voltage_pic=11
Chain[J13] orignal chain_voltage_pic=1 value=930
Chain[J13] will use backup chain_voltage_pic=870 [11]
Chain[J13] get working chain_voltage_pic=11
Chain[J14] orignal chain_voltage_pic=1 value=930
Chain[J14] will use backup chain_voltage_pic=870 [11]
Chain[J14] get working chain_voltage_pic=11
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
T9+ try get asic num for the 1 time
Chain[J2] has 18 asic
Chain[J3] has 18 asic
Chain[J4] has 18 asic
Chain[J9] has 18 asic
Chain[J10] has 18 asic
Chain[J11] has 18 asic
Chain[J12] has 18 asic
Chain[J13] has 18 asic
Chain[J14] has 18 asic
Chain[J2] has core num in PIC
Chain[J3] has core num in PIC
Chain[J4] has core num in PIC
Chain[J9] has core num in PIC
Chain[J10] has core num in PIC
Chain[J11] has core num in PIC
Chain[J12] has core num in PIC
Chain[J13] has core num in PIC
Chain[J14] has core num in PIC
miner total rate=10619GH/s fixed rate=10500GH/s
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:3 max freq=575
Chain:3 min freq=575
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575
Miner fix freq ...
read PIC voltage=930 on chain[1]
Chain:1 chipnum=18
Chain[J2] voltage added=0.0V
Chain:1 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:1 max freq=575
Chain:1 min freq=575
read PIC voltage=930 on chain[2]
Chain:2 chipnum=18
Chain[J3] voltage added=0.0V
Chain:2 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:2 max freq=575
Chain:2 min freq=575
read PIC voltage=930 on chain[3]
Chain:3 chipnum=18
Chain[J4] voltage added=0.0V
Chain:3 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:3 max freq=575
Chain:3 min freq=575
read PIC voltage=930 on chain[8]
Chain:8 chipnum=18
Chain[J9] voltage added=0.0V
Chain:8 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:8 max freq=575
Chain:8 min freq=575
read PIC voltage=930 on chain[9]
Chain:9 chipnum=18
Chain[J10] voltage added=0.0V
Chain:9 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:9 max freq=575
Chain:9 min freq=575
read PIC voltage=930 on chain[10]
Chain:10 chipnum=18
Chain[J11] voltage added=0.0V
Chain:10 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:10 max freq=575
Chain:10 min freq=575
read PIC voltage=930 on chain[11]
Chain:11 chipnum=18
Chain[J12] voltage added=0.0V
Chain:11 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:11 max freq=575
Chain:11 min freq=575
read PIC voltage=930 on chain[12]
Chain:12 chipnum=18
Chain[J13] voltage added=0.0V
Chain:12 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:12 max freq=575
Chain:12 min freq=575
read PIC voltage=930 on chain[13]
Chain:13 chipnum=18
Chain[J14] voltage added=0.0V
Chain:13 base freq=575
Asic[ 0]:575
Asic[ 1]:575 Asic[ 2]:575 Asic[ 3]:575 Asic[ 4]:575 Asic[ 5]:575 Asic[ 6]:575 Asic[ 7]:575 Asic[ 8]:575
Asic[ 9]:575 Asic[10]:575 Asic[11]:575 Asic[12]:575 Asic[13]:575 Asic[14]:575 Asic[15]:575 Asic[16]:575
Asic[17]:575
Chain:13 max freq=575
Chain:13 min freq=575
max freq = 575
set baud=1
Chain[J9] PIC temp offset=1,2,0,0,0,0,33,28
chain[8] temp chip I2C addr=0x98
Chain[J9] chip[0] use PIC middle temp offset=2 typeID=41
New offset Chain[8] chip[0] local:32 remote:28 offset:34
Chain[J9] chip[0] get middle temp offset=34 typeID=41
Chain[J11] PIC temp offset=1,-1,0,0,0,0,33,28
chain[10] temp chip I2C addr=0x98
Chain[J11] chip[0] use PIC middle temp offset=-1 typeID=41
New offset Chain[10] chip[0] local:33 remote:32 offset:31
Chain[J11] chip[0] get middle temp offset=31 typeID=41
Chain[J13] PIC temp offset=1,4,0,0,0,0,33,28
chain[12] temp chip I2C addr=0x98
Chain[J13] chip[0] use PIC middle temp offset=4 typeID=41
New offset Chain[12] chip[0] local:31 remote:23 offset:38
Chain[J13] chip[0] get middle temp offset=38 typeID=41
single board rate=1179 voltage limit=870 on chain[1]
get PIC voltage=870 on chain[1], check: must be < 870
single board rate=1179 voltage limit=870 on chain[2]
get PIC voltage=870 on chain[2], check: must be < 870
single board rate=1179 voltage limit=870 on chain[3]
get PIC voltage=870 on chain[3], check: must be < 870
single board rate=1179 voltage limit=870 on chain[8]
get PIC voltage=870 on chain[8], check: must be < 870
single board rate=1179 voltage limit=870 on chain[9]
get PIC voltage=870 on chain[9], check: must be < 870
single board rate=1179 voltage limit=870 on chain[10]
get PIC voltage=870 on chain[10], check: must be < 870
single board rate=1179 voltage limit=870 on chain[11]
get PIC voltage=870 on chain[11], check: must be < 870
single board rate=1179 voltage limit=870 on chain[12]
get PIC voltage=870 on chain[12], check: must be < 870
single board rate=1179 voltage limit=870 on chain[13]
get PIC voltage=870 on chain[13], check: must be < 870
open core on chain[1] [8] [9]...
set voltage=870 on chain[1], the real voltage=870
Chain[J2] set working voltage=870 [11]
open core on chain[2] [10] [11]...
set voltage=870 on chain[2], the real voltage=870
Chain[J3] set working voltage=870 [11]
open core on chain[3] [12] [13]...
set voltage=870 on chain[3], the real voltage=870
Chain[J4] set working voltage=870 [11]
setStartTimePoint total_tv_start_sys=4382 total_tv_end_sys=4383
restartNum = 2 , auto-reinit enabled...
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[1]: (asic index start from 1-18)
Asic[01]=59.0720 Asic[02]=64.8940 Asic[03]=70.3630 Asic[04]=62.5110 Asic[05]=61.4710 Asic[06]=70.5310 Asic[07]=64.0380 Asic[08]=61.4710
Asic[09]=57.2770 Asic[10]=71.6550 Asic[11]=66.3030 Asic[12]=61.9580 Asic[13]=19.3940 Asic[14]=64.3070 Asic[15]=40.6170 Asic[16]=905.969
Asic[17]=2.61700
get RT hashrate from Chain[2]: (asic index start from 1-18)
Asic[01]=33.4360 Asic[02]=62.7460 Asic[03]=61.6220 Asic[04]=70.6820 Asic[05]=65.3300 Asic[06]=65.9000 Asic[07]=62.1420 Asic[08]=65.4640
Asic[09]=63.8370 Asic[10]=66.8570 Asic[11]=63.3330 Asic[12]=62.5950 Asic[13]=67.1420 Asic[14]=65.6820 Asic[15]=65.6660 Asic[16]=62.3270
Asic[17]=66.3870
get RT hashrate from Chain[3]: (asic index start from 1-18)
Asic[01]=66.9740 Asic[02]=63.3170 Asic[03]=65.7490 Asic[04]=63.5680 Asic[05]=62.6290 Asic[06]=31.0540 Asic[07]=63.8700 Asic[08]=64.6920
Asic[09]=68.0650 Asic[10]=64.6590 Asic[11]=59.8270 Asic[12]=67.3430 Asic[13]=620.756 Asic[14]=1.02300 Asic[15]=150.994 Asic[16]=34.8960
Asic[17]=369.098
get RT hashrate from Chain[8]: (asic index start from 1-18)
Asic[01]=65.4640 Asic[02]=68.2490 Asic[03]=67.0410 Asic[04]=66.4710 Asic[05]=68.0810 Asic[06]=71.1350 Asic[07]=63.4840 Asic[08]=66.1190
Asic[09]=64.4580 Asic[10]=65.9840 Asic[11]=58.7700 Asic[12]=65.2630 Asic[13]=0.00000 Asic[14]=150.994 Asic[15]=2.71700 Asic[16]=1.20700
Asic[17]=5.58600
get RT hashrate from Chain[9]: (asic index start from 1-18)
Asic[01]=46.6900 Asic[02]=69.8770 Asic[03]=62.0420 Asic[04]=62.8640 Asic[05]=65.4470 Asic[06]=66.4200 Asic[07]=68.3500 Asic[08]=62.4610
Asic[09]=58.9040 Asic[10]=68.5850 Asic[11]=63.7700 Asic[12]=63.4840 Asic[13]=23.4540 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=65.7160
Asic[17]=486.539
get RT hashrate from Chain[10]: (asic index start from 1-18)
Asic[01]=65.0450 Asic[02]=72.4770 Asic[03]=42.6300 Asic[04]=66.4710 Asic[05]=61.2200 Asic[06]=61.3870 Asic[07]=64.6760 Asic[08]=62.0420
Asic[09]=66.4370 Asic[10]=69.6250 Asic[11]=67.5110 Asic[12]=66.8570 Asic[13]=64.1560 Asic[14]=66.5040 Asic[15]=62.4280 Asic[16]=70.3800
Asic[17]=66.9740
get RT hashrate from Chain[11]: (asic index start from 1-18)
Asic[01]=67.6790 Asic[02]=68.3670 Asic[03]=67.2760 Asic[04]=67.0410 Asic[05]=73.0470 Asic[06]=65.4980 Asic[07]=64.4410 Asic[08]=65.1620
Asic[09]=67.5780 Asic[10]=65.9840 Asic[11]=65.0620 Asic[12]=65.1450 Asic[13]=66.2360 Asic[14]=46.6740 Asic[15]=65.6150 Asic[16]=69.9770
Asic[17]=65.6820
get RT hashrate from Chain[12]: (asic index start from 1-18)
Asic[01]=64.6420 Asic[02]=71.4030 Asic[03]=63.6690 Asic[04]=63.4170 Asic[05]=67.2930 Asic[06]=69.5240 Asic[07]=66.0180 Asic[08]=68.3160
Asic[09]=65.2960 Asic[10]=62.4610 Asic[11]=65.2630 Asic[12]=68.9710 Asic[13]=21.6920 Asic[14]=5.73700 Asic[15]=1.81100 Asic[16]=0.00000
Asic[17]=2.51600
get RT hashrate from Chain[13]: (asic index start from 1-18)
Asic[01]=62.8470 Asic[02]=61.0180 Asic[03]=67.4940 Asic[04]=66.0010 Asic[05]=65.6660 Asic[06]=57.8640 Asic[07]=66.3370 Asic[08]=69.9600
Asic[09]=69.6920 Asic[10]=60.9680 Asic[11]=71.6050 Asic[12]=64.6420 Asic[13]=855.638 Asic[14]=620.756 Asic[15]=9.27700 Asic[16]=0.00000
Asic[17]=0.00000 Check Chain[J2] ASIC RT error: (asic index start from 1-18)
Asic[16]=905.969000
Check Chain[J3] ASIC RT error: (asic index start from 1-18)
Check Chain[J4] ASIC RT error: (asic index start from 1-18)
Asic[13]=620.756000
Asic[15]=150.994000
Asic[17]=369.098000
Check Chain[J9] ASIC RT error: (asic index start from 1-18)
Asic[14]=150.994000
Check Chain[J10] ASIC RT error: (asic index start from 1-18)
Asic[17]=486.539000
Check Chain[J11] ASIC RT error: (asic index start from 1-18)
Check Chain[J12] ASIC RT error: (asic index start from 1-18)
Check Chain[J13] ASIC RT error: (asic index start from 1-18)
Check Chain[J14] ASIC RT error: (asic index start from 1-18)
Asic[13]=855.638000
Asic[14]=620.756000
Done check_asic_reg
do read temp on Chain[8]
Chain[8] Chip[1] TempTypeID=41 middle offset=34
Chain[8] Chip[1] local Temp=64
Chain[8] Chip[1] middle Temp=78
Special fix Chain[8] Chip[1] middle Temp = 79
Done read temp on Chain[8]
do read temp on Chain[10]
Chain[10] Chip[1] TempTypeID=41 middle offset=31
Chain[10] Chip[1] local Temp=66
Chain[10] Chip[1] middle Temp=77
Special fix Chain[10] Chip[1] middle Temp = 81
Done read temp on Chain[10]
do read temp on Chain[12]
Chain[12] Chip[1] TempTypeID=41 middle offset=38
Chain[12] Chip[1] local Temp=67
Chain[12] Chip[1] middle Temp=76
Special fix Chain[12] Chip[1] middle Temp = 82
Done read temp on Chain[12]
set FAN speed according to: temp_highest=67 temp_top1[PWM_T]=67 temp_top1[TEMP_POS_LOCAL]=67 temp_change=-1 fix_fan_steps=0
FAN PWM: 86
read_temp_func Done!
CRC error counter=15027
|
