Bitcoin Forum
November 16, 2024, 04:21:15 PM *
News: Check out the artwork 1Dq created to commemorate this forum's 15th anniversary
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: Review: Bitmain Antminer S15-28TH/s  (Read 570 times)
lvl (OP)
Member
**
Offline Offline

Activity: 108
Merit: 106



View Profile WWW
January 31, 2019, 02:59:33 AM
Last edit: January 31, 2019, 12:32:58 PM by frodocooper
Merited by dbshck (5), mindrust (1)
 #1

Original (Chinese): https://www.cybtc.com/forum.php?mod=viewthread&tid=43712
English: http://www.cybtc.org/article-137-1.html

Bitmain is a technology company specializing in high-speed, low-power custom chip design and development, successfully designed and produced a variety of ASIC custom chips and integrated systems. Bitmain was founded in 2013. In the same year, it launched the first generation bitcoin mining machine of the ant mining machine series - Antminer S1. After more than five years of development, the antminer series bitcoin mining machine passed S1, S2, S3, S4 Iterations of multiple models of S5, S7 and S9, the latest bitcoin mining models are S15 and T15, which will be sold on November 8, 2018.

The Antminer S15 adopts a new 7nm chip process. The official evaluation of the S15 is durable, energy saving. Emphasizing the characteristics of "high performance, more durable, and more power saving". From the officially announced parameters, the Antminer S15 is built in. Standard and low-power mining modes. The officially announced parameters have a unit-to-power ratio of 57J/T in standard mode, and the unit-to-power ratio of low-power mode has reached 50J/T. Compared to the products in the current market, in terms of Bitcoin miners, this unit power consumption ratio has set a new record.

Antminer S15 official parameters,



Recently, the Antminer S15 has sent to Cybtc for testing. Please see the third-party independent review by us.

I. Unpacking:

Because the Antminer S15 adopts a new all-in-one and parallel fan design, the packaging box has changed from the previous generations. The previous cuboid has changed into a square-like style. The packaging material is still packaged in an industrial carton, and the box is marked manufacturer information, logistics warehousing logo, mining machine specification model and strip identification code, outer box size: 486*388*265, weight about 8.7kg.



The interior of the two pieces of styrofoam is firmly packed in the box from the upper and lower sides to ensure the safety of the mining machine during transportation. There is also a gap around the pearl foam for easy access.

Take out the styrofoam on one side to see the main body of the mining machine. The mining machine is wrapped by an anti-electrostatic bag. Compared with the box, the mining machine looks very small and only takes up about half of the box space.

The Antminer S15 changed the style of single-tube with double cooling fans as S1-S9 models, and became a dual-fan parallel single-side air intake and adopted the integrated machine design of the mining machine + power supply. The whole machine size is 279*175*221mm, weight 7.13 kg.



The Antminer S15 is small and neat, the air inlet side and the mining machine interface side are on the same side, the fan is removed from the air outlet side, and a honeycomb-shaped baffle is used.



The advantage of the all-in-one design is that the wire connection is reduced. The appearance of the mining machine is more compact, and the use and operation and maintenance are more convenient. The connection between the Antminer S15 mining machine and the power supply uses a clip-connected design, and the controller and the power board are still connected by flat signal cable.



The nameplate of the mining machine body is marked with the model number, hash rate, and identification bar code. If the bottom part can increase the anti-slip mat, it is better to strengthen the stability of the mining machine when it is placed horizontally. The mining machine supports the erect and horizontal two ways. On the rack, the miner can choose the placement method according to the size of the mine rack.



Antminer S15 infrastructure.

Note: The new mining machine is affixed with fragile stickers when it leaves the factory. Do not disassemble it by itself. The disassembly of the mining machine during the warranty period may affect the warranty!

First, remove the fan and connecting cable.

The Antminer S15 uses two cooling fan, the model is DFB380012000Ts, with a power consumption of 3.14A provides heat dissipation for the mining machine. The parallel design not only shortens the cooling air path but also reduces the wind resistance and further improves the heat dissipation efficiency of the mining machine. For the sake of appearance, the connection between the fan power cable and the control board to the power supply is fixed together with the cable tie. When the fan is removed, the connecting wires should be removed together, and Then remove the 4 connection cables of the control board and the mining board.



Second, remove the power supply.

Use the Allen key to remove the connecting piece of the power supply and the mining machine, then press the iron piece under the power outlet, and push the power module forward, compared to the 6-pin interface of the previous series of Antminer. For the power supply that needs to be plugged in, the design of the all-in-one machine provides greater convenience in operation and maintenance. The Antminer S15 is also connected to the control board to control the power supply voltage regulation line to achieve the standard and low power mode mining conversion.



The Antminer S15 is equipped with Bitmain's first 7nm BM1391 chip, which integrates 1 billion transistors. In addition to the performance improvement, the BM1391's chip package eliminates the traditional over-molding plastic package method and adopts the Exposed Die package solution. In this solution, the wafer back surface is directly in contact with the heat sink, and the heat transfer efficiency of the chip is greatly improved. It can be seen on the board that the Antminer S15 mining board is only equipped with a heat sink on the back side of the chip.



The advantage of the heat transfer efficiency of the power board is that it reduces the area occupied by the board, and more chips can be placed per unit volume. The reduction of the heat sink also makes the machine smaller and lighter. The S15 has 4 built-in power boards, each of which contains 72 BM1391 chips, for a total of 288.

Antminer S15 is equipped with a new high conversion rate APW8 power supply, which reduces the loss during power conversion during use, and uses the mining machine to save energy. The APW8 power supply provides a 16.32-20.04V output, and the power supply works well. It uses two 40BH-12E 12V 0.35A fans for power supply.



The area of ​​the Antminer S15's control board is further reduced to 115mm*95mm compared to the previous series.



Antminer S15 dismantling full picture.



Antminer S15 and S9 size comparison.



II. Antminer S15 installation:

The design of the Antminer S15 all-in-one machine reduces the link of the power line of the plugging and unloading machine. As long as it is placed in the rack, plug in the power cable and the network cable to complete the hardware installation.

Find the mine IP address. Antminer S15 mining machine is automatically assigned IP mode, you can enter the local router to view the IP address named "antMiner".



Or use the ant official mining machine management software BitmainMinerTool to scan the IP address of the current mining machine. You can also use the management software to set the mining pool address and worker name, update the firmware, etc. When the number of mining machines is large, you can also use the mining machine. IP report button to find the IP address of the mining machine.



To view the real-time status of a single mining machine, you need to enter the mining machine control page. First, enter the mining machine IP into the control page home page, and then enter the default user name and password (the default is root) to enter the mining machine control page.



The new mining machine needs to modify the name of the mining pool and miners, click on the “Miner Configuration” page to modify the main mining pool address and worker name, and modify the two alternate mining pool addresses and miners' names as needed. Antminer S15 has built-in standard and low-power mining modes, so you can easily select any mode mining on this page according to your needs. After each setting is completed, click “Save&Apply” to save the settings and apply.

After saving, the miner will restart the mining procedure. After about a few minutes of normal operation of the mining machine, you can enter the mining operation interface “Miner Status” to check the operation of the mining machine, including running time, hash rate, Chip status, operating frequency, PCB board and chip temperature, fan speed and other parameters information.



III. Review:

The Antminer S15 has standard mining mode and low power consumption mode. Therefore, we tested the two modes for 24 hours respectively. The test environment temperature is about 17 degrees, and the noise value is around 36 decibels.

After the mining machine is turned on, the fan runs at full speed, the power consumption of the boot is about 25W and further increases slowly, and the noise level is up to 81.2 dB.



Standard mode test

Power consumption: The miner's chip is fully operational, and the control page power is 28T. The measured power consumption of the miner is 1610-1620W, which is in line with the officially announced 1596W ±7% level.

Noise: Due to the low ambient temperature, the number of fan rotations is basically stable at around 3120 rpm. The noise value of the operating environment is measured to be 76.5 decibels. The distance of the mine is 27.7 meters, and the noise level is properly controlled.

Temperature: Antminer S15 has a total of four mining boards. There are four temperature-sensing modules distributed on each calculation board. The chip temperature is at least 44 degrees and the highest is 78 degrees. Thanks to the Exposed Die package, the outlet temperature is about 42 degrees. The power outlet temperature is about 28 degrees.



Because the Antminer S15 adopts the one-piece design, We also test the contact temperature of the power supply and the mining machine's power board. It can be clearly seen that the temperature values ​​of each point are different.



Hash rate: After 24 hours test in the btc.com mining pool, the average hash rate of the Antminer S15 in 24 hours was 28.56 TH/s. Thus calculate the unit energy efficiency ratio = 1620W / 28.56 ≈ 56.72W / T, and the official published data 57 J / T consistent.



Low power mode test

Power consumption: After checking the option behind “Low Power Mode” on the Antminer S15 Pool Settings page and saving the application, the miner can run in low power mode. After the power of the mining machine control page reaches 17T, the measured power consumption is up to 836.6W, and the running data meets the official data of 775W ±7% - 900W ±7%.

Noise: As the power and power consumption are reduced, the fan speed is basically stable at around 2400 rpm, the measured operating environment noise value is 77 decibels, and the distance measured by the mining machine is about 66 decibels at a distance of 2 meters. The noise level and the standard mode. At the same level.

Temperature: The four mining board chips have a minimum temperature of 25 degrees and a maximum of 62 degrees. The outlet temperature is about 30 degrees, which is slightly lower than the standard mode. The temperature of the power outlet is about 20 degrees.



Contact point temperature value between the power supply and mining machine mining board.



Hash rate: After 24 hours of testing in the btc.com mine, the average 24-hour power was measured at 17.5TH/S. Thus calculate the unit energy efficiency ratio = 836.6W / 17.5 ≈ 47.8W / T, lower than the official published data 50 J / T.



IV. Summary:

Two built-in mining modes. The power consumption per unit of power in low-power mode is lower than 50W/T, which is better. The lower the power consumption ratio, the lower the price of the shutdown.
One machine design reduces the wire, beautiful and convenient.
Exposed Die package improves heat dissipation, increasing the number of chips per unit volume and reducing heat sinks, reducing overall weight.
The new AWP8 power supply is used, easy to assemble and disassemble.
The machine noise is lower and the temperature is lower than other mining machines.
The calculation power of the whole machine is stable and fluctuating.

Finally, exposed power connectors may cause problems if touch the iron on the shelf. Maybe it can have improvement.

The Antminer series mining machine has evolved from S1 to S15, and the computing power has evolved from S180's 180G/360W to S15's 28000G/1600W. This is not just a digital evolution, but also the ups and downs of the Bitcoin industry. The mining machine is upgrading. Bitcoin is advancing, leaving many stories in the chain, the currency circle and the mining ring than the ten-year journey of holding the currency. In the two-year life cycle of S9, S9's bitcoin mining machine market share is far ahead, and currently in the market background of the rising bitcoin computing power, the depressed bear market and more new mining machines, Whether the ant S15 can create a new benchmark for the bitcoin mining machine, time will give us the answer.

More miner and crypto reviews on: cybtc.org

Telegram:https://t.me/joinchat/LgPYnE1vPpXqYDVpPaQyxw

Discord:https://discord.gg/RfCZMNY

news and reviews on bitcoin miner and other crypto miners. www.cybtc.org(english),www.cybtc.com(chinese),www.cybtc.net(chinese)
philipma1957
Legendary
*
Online Online

Activity: 4312
Merit: 8855


'The right to privacy matters'


View Profile WWW
January 31, 2019, 03:17:19 AM
 #2

Nice info and thanks for original link.

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
NotFuzzyWarm
Legendary
*
Online Online

Activity: 3822
Merit: 2703


Evil beware: We have waffles!


View Profile
March 04, 2019, 04:28:28 PM
Last edit: March 05, 2019, 01:12:45 AM by frodocooper
Merited by frodocooper (1), fanatic26_ (1)
 #3

This is an excellent review. Thank you for this. I find it very difficult to find information on the "amps" these units draw. No one seems to address this important piece of the puzzle. I know how to convert Watts to Amps but I am very curious as to the manufacturers claimed number on amps? Does anyone know this?

Only wattage is specified because by themselves the Amps pulled or voltage in are meaningless. Only using the 2 together giving you wattage matters.
A miner ran with a high line voltage will pull less amps than a miner ran on a lower voltage line. Yes, they could spec the min/max amps together with the min/max line voltage but considering it is very simple math to figure out makes it rather pointless.

- For bitcoin to succeed the community must police itself -    My info useful? Donations welcome!  3NtFuzyWREGoDHWeMczeJzxFZpiLAFJXYr
 -Sole remaining active Primary developer of cgminer, Kano's repo is here
-Support Sidehacks miner development. Donations to:   1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
fanatic26_
Full Member
***
Offline Offline

Activity: 294
Merit: 129


View Profile
March 04, 2019, 04:35:47 PM
Last edit: March 05, 2019, 01:13:00 AM by frodocooper
Merited by frodocooper (1)
 #4

Only wattage is specified because by themselves the Amps pulled or voltage in are meaningless. Only the 2 together giving you wattage matters.
A miner ran with a high line voltage will pull less amps than a miner ran on a lower voltage line.

Line voltage is variable no matter where you are, it even changes based on load so there is no reliable way to give a specific amperage rating.

e.g.

1500w @ 208v = 7.2a
1500w @ 240v = 6.3a
philipma1957
Legendary
*
Online Online

Activity: 4312
Merit: 8855


'The right to privacy matters'


View Profile WWW
March 04, 2019, 05:04:09 PM
Last edit: March 05, 2019, 01:13:38 AM by frodocooper
 #5

Line voltage is variable no matter where you are, it even changes based on load so there is no reliable way to give a specific amperage rating.

e.g.

1500w @ 208v = 7.2a
1500w @ 240v = 6.3a

This range of 6.3 amps to 7.2 amps is pretty much the correct range.

I think the psu can run a little lower volts then 208 so off the top of my head my s15 does 1565 watts at 220 volts = 1565/220 or  7.113 amps

Now I went on line and they mention 200 volts as the lowest volts I can find.

So 1565/200 = 7.825 amps may be max amps

And 6.3 may be min amps

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
NotFuzzyWarm
Legendary
*
Online Online

Activity: 3822
Merit: 2703


Evil beware: We have waffles!


View Profile
March 04, 2019, 06:13:34 PM
Last edit: March 06, 2019, 02:54:40 PM by NotFuzzyWarm
 #6

Directly giving folks an Answer like that ^^ does not encourage them to learn and think for themselves....
I gave the 'why' and stand by my answer as OP knows how to do the math so let them do it themselves based on what their line voltage is..

- For bitcoin to succeed the community must police itself -    My info useful? Donations welcome!  3NtFuzyWREGoDHWeMczeJzxFZpiLAFJXYr
 -Sole remaining active Primary developer of cgminer, Kano's repo is here
-Support Sidehacks miner development. Donations to:   1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
philipma1957
Legendary
*
Online Online

Activity: 4312
Merit: 8855


'The right to privacy matters'


View Profile WWW
March 05, 2019, 12:52:12 AM
Last edit: March 05, 2019, 01:14:14 AM by frodocooper
 #7

Directly giving folks an Answer like that ^^ does not encourage them to learn or think for themselves....
I gave the 'why' and stand by my answer as OP knows how to do the math so let them do it themselves based on what their line voltage is..

true  but sometimes a young child wants to hold an adults hand to cross the street.

I would go into a long story about that, but it is not important for me to tell it to you.

Only that you know a little kid once put his hand out for me to walk him across the street.

So I went at my answer from that angle.  Not anything wrong from your method just different angle for you than me. Grin

▄▄███████▄▄
▄██████████████▄
▄██████████████████▄
▄████▀▀▀▀███▀▀▀▀█████▄
▄█████████████▄█▀████▄
███████████▄███████████
██████████▄█▀███████████
██████████▀████████████
▀█████▄█▀█████████████▀
▀████▄▄▄▄███▄▄▄▄████▀
▀██████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN  THE FIRST WEB3 CASINO   
.
.. PLAY NOW ..
minefarmbuy
Full Member
***
Offline Offline

Activity: 1022
Merit: 221


We are not retail.


View Profile WWW
March 08, 2019, 02:37:04 AM
 #8

We may need to start a "phil"-osophical thread.

I like both approaches. The only thing to consider is fact checking if handed answers and mathematics in school isn't what it once was either.

That given my 30A 240v amp lines wont touch a s15/t15 until the psu is rated for higher. As it's not worth the risk for my very small set up to short myself on any warranty at all.   

Premier asic sourcing minefarmbuy.com #mineon
Twitter:@minefarmbuy -LN Tips-
Email: info@minefarmbuy.com PGP:1A1C A4D4 CE04 F57E 1C0C 5240 592A 09BF CCB4 F0C3
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!