Zilminer - mine POW coin in dual mine mode with almost no power use!!!!!

[reb0rn21]

Is this working to anybody?

I am trying since yesterday but I cant.
I get this error: "Anti-hacking system detected modification of the miner memory. If you using an antivirus, add miner to antivirus exceptions"

I have added exceptions to all antivurs, windows defender, etc still get this message.

If you have smart screen on windows then disable it

if you use some miner with watch dog which prevent killtask disable it in miner, so its readme or -help

Hello everyone

How long does it take to switch from  "POWs submitted " to  "POWs accepted "?

Thank you

it happen at once if its stay as Submitted but no accepted, that share is stale/rejected

don`t forget in one block only first 600 nodes are accepted in shard (this will change and increase over time but dev did not give timeframe nor plan) rest of shares are rejected as shard is full

[reb0rn21]

configured miner is done for grin+bminer and zill, just run pool.zil

edit grin.bat and pool.zil with you addresses

https://www.mediafire.com/file/159zgvm988vkrpj/zil_pool_grin.zip/file

all other miners are supported, download miners from source file and check sha

[auctusops]

I can't create a wallet!

Found this:

Code:

Create a Zilliqa Wallet on https://wallet.zilliqa.com

but that only redirects to main page on zilliqa.com

What am I missing?

[sommersut]

Try moonlet wallet for chrome

[reb0rn21]

Try moonlet wallet for chrome

+1

[Branko]

Nice, thank you for all the info, going to check this

[auctusops]

Thanks, that worked.

The owner of http://rudnik.hopto.org:5000/ sould update the `get wallet link`with a better page link.

[reb0rn21]

I see some ppl have lots of rejects, for most latest zilminer works fine, but looks like not for all ppl, if you have more then 60% rejects try older version v0.2.13

first reject after 10-20ms of POW start on new miner is expected (its done on purpose so miner can free enough ram), after that no (you should get accepted), also rejects after 30-40sec are also expected, its the way coin blockchain work.... more optimization are being done but the hash race to fill shard in 10-20sec  will always produce a some rejects

[ep690d]

Hi,

i have only rejected, i hope in new version soon, there are new commits in github.

https://github.com/DurianStallSingapore/ZILMiner/compare/v0.2.16...master

Bye

[reb0rn21]

Hi,

i have only rejected, i hope in new version soon, there are new commits in github.

https://github.com/DurianStallSingapore/ZILMiner/compare/v0.2.16...master

Bye

try 0.2.1.3 or v0.1.25 some ppl had luck only with those

0.2.16.1 do produce more rejected shares but some are face and produce more so at the end result is same or better, just see if it works for you

[sommersut]

It started working for me.
However after the first run, zilminer return with cu1, cu2, etc marks in red color and dont work properly.
I expanded the PC virtual memory, cleared dag and also my GPUs have 8 GB ram.

Any help?

[reb0rn21]

do you have setup to close primary miner?
download my zip file and see how its done, most probably there is conflict with both miners runing or your gpu get out of ram due windows limitation

[sommersut]

Yes, I am running from the mediafire file you sent. I will keep trying maybe it is a W10 limitation

[dragonmike]

Is there any indication of hashrate... or reward calculators anywhere?
What can one expect from the usual GPU suspects on a daily basis? I've got a few I could spare I suppose, but not home at present so I can't really remote in and setup a test box...

[reb0rn21]

atm its a bit under 1$ per 6 card rig, but diff is going up

@sommersut
you need to test if grin.bat and stop.bat are working fine by runing them, they need to start/stop the grin miner

[sommersut]

I was running out of memory. Restarted rig and now it works thanks

[tf2addict]

Anyone have issues with your network connection dropping out when zilminer starts mining, especially when running more than one GPU?

[reb0rn21]

Anyone have issues with your network connection dropping out when zilminer starts mining, especially when running more than one GPU?

No if you mean inside POW then its normal miner to drop share and recconect for more work

Pool has been readjusted for more node use, will see if rejected change in next POW run

[tf2addict]

Anyone have issues with your network connection dropping out when zilminer starts mining, especially when running more than one GPU?

No if you mean inside POW then its normal miner to drop share and recconect for more work

Pool has been readjusted for more node use, will see if rejected change in next POW run

What I mean is my entire network connection on the machine running zilminer dies for 10-30 seconds.  It never happens when only using one GPU, only when using multiple GPUs.  And yes I have rebooted everything in the network (PCs, routers, modem).

[reb0rn21]

Have no idea if its happen when POW activate maybe your PC does not like very high priority GPU use zilminer start and it kill you network
You can see commands with zilminer --help-ext cl for AMD or --help-ext cu for NV and drop down work size defaults

With last pool update HIGH RATE of initial rejects on each POW block is normal as miner is hashing dupe work to be ready for miner switch for stability!, so each POW start you will get one rejects! which is fake, I hope miner dev change or hide this as ppl are confused

Also there is some issue with network for all, way too many rejects even for this coin atm, I hope they release updated node soon