How to fix s9 the miner accidentally remove from power source while upgrading?

[Theboyz12]

Do you know how to fix a s9 miner bootloop?
I accidentally remove the miner from the socket while upgrading I remove it from the socket because of the dashboard stuck.

Tried all resetting ways but until now the miner wasn't recognize anymore.

i search in the google and I found sd card flashing but i don't know how to make it work. Do you know how to flash the miner using sd card?

[BitMaxz]

Never heard someone success on flashing antminer s9 with SD card but I know some other way to fix this but you need a PICKIT 3 to reprogram the s9 control board.

Someone done this with t9 miner but I know it will also work on s9 miner.

You can check the repairing method below.

- repair a T9 + after a bad firmware (lost chain)

[mikeywith]

that's only to fix the hash boards, it won't work for the control board.

he needs to flush it using an SD card.

download the tool from bitmain > https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

and then you will need the SD firmware which i can't seem to find on bitmain website, but i found this on the forum

https://bitcointalk.org/index.php?topic=5029225.0

the guy has it uploaded somewhere

* i am not responsible for any damage caused by any of the files, DYOR and do this at your own risk

what i would do , is contact bitmain and ask them for the file, it would be safer that way.

[Artemis3]

that's only to fix the hash boards, it won't work for the control board.

he needs to flush it using an SD card.

download the tool from bitmain > https://service.bitmain.com/support/download?product=Flashing%20SD%20card%20with%20image

and then you will need the SD firmware which i can't seem to find on bitmain website, but i found this on the forum

https://bitcointalk.org/index.php?topic=5029225.0

the guy has it uploaded somewhere

* i am not responsible for any damage caused by any of the files, DYOR and do this at your own risk

what i would do , is contact bitmain and ask them for the file, it would be safer that way.

Or, place Braiins OS into an sd card, move jumper jp4 and mine away!

Of course it would be better to fix the OS in the nand on the controller so you don't need to depend forever on the sd card.