S9 Hashboard error: 2 boards=0 chip, 1 board=33 chips

[KurtZZ]

Hi all.

My S9 miner don't work fine, it seems that J6/J8 hashboard couldn't be found any chips, and J7 hashboard could find 33 chips. I know it's better to replace the 34th chip for J7, but i don't think it worth to do it.

I want to repair J6/J8 hashboard, i want know whether there are other solution to repair them except to replace 0th chips?

The following is the kernel log.

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000313] ps7-ttc #0 at df804000, irq=43
[    0.000625] Console: colour dummy device 80x30
[    0.000656] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040212] pid_max: default: 32768 minimum: 301
[    0.040436] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040455] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042617] CPU: Testing write buffer coherency: ok
[    0.042965] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043025] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[    0.043252] L310 cache controller enabled
[    0.043271] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121045] CPU1: Booted secondary processor
[    0.210230] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210365] Brought up 2 CPUs
[    0.210384] SMP: Total of 2 processors activated.
[    0.210392] CPU: All CPU(s) started in SVC mode.
[    0.211090] devtmpfs: initialized
[    0.213503] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214755] regulator-dummy: no parameters
[    0.223753] NET: Registered protocol family 16
[    0.226073] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.228390] cpuidle: using governor ladder
[    0.228404] cpuidle: using governor menu
[    0.235959] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.237506] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.237520] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.237642] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.259898] bio: create slab <bio-0> at 0
[    0.261627] vgaarb: loaded
[    0.262345] SCSI subsystem initialized
[    0.263235] usbcore: registered new interface driver usbfs
[    0.263408] usbcore: registered new interface driver hub
[    0.263639] usbcore: registered new device driver usb
[    0.264181] media: Linux media interface: v0.10
[    0.264351] Linux video capture interface: v2.00
[    0.264594] pps_core: LinuxPPS API ver. 1 registered
[    0.264606] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.264731] PTP clock support registered
[    0.265099] EDAC MC: Ver: 3.0.0
[    0.266176] Advanced Linux Sound Architecture Driver Initialized.
[    0.269190] DMA-API: preallocated 4096 debug entries
[    0.269206] DMA-API: debugging enabled by kernel config
[    0.269295] Switched to clocksource arm_global_timer
[    0.290771] NET: Registered protocol family 2
[    0.291452] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.291509] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.291595] TCP: Hash tables configured (established 4096 bind 4096)
[    0.291640] TCP: reno registered
[    0.291659] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.291693] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.291948] NET: Registered protocol family 1
[    0.292311] RPC: Registered named UNIX socket transport module.
[    0.292324] RPC: Registered udp transport module.
[    0.292332] RPC: Registered tcp transport module.
[    0.292341] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.292354] PCI: CLS 0 bytes, default 64
[    0.292816] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.294881] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.297089] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.297285] msgmni has been set to 967
[    0.298098] io scheduler noop registered
[    0.298112] io scheduler deadline registered
[    0.298153] io scheduler cfq registered (default)
[    0.308496] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.308517] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.433218] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.000521] console [ttyPS0] enabled
[    1.004809] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.012464] [drm] Initialized drm 1.1.0 20060810
[    1.029639] brd: module loaded
[    1.039054] loop: module loaded
[    1.048636] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.054532] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.062675] libphy: XEMACPS mii bus: probed
[    1.067046] ------------- phy_id = 0x3625e62
[    1.072140] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.080799] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.087418] ehci-pci: EHCI PCI platform driver
[    1.094674] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.101517] usbcore: registered new interface driver usb-storage
[    1.108374] mousedev: PS/2 mouse device common for all mice
[    1.114537] i2c /dev entries driver
[    1.121577] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.127066] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.132983] Xilinx Zynq CpuIdle Driver started
[    1.137839] sdhci: Secure Digital Host Controller Interface driver
[    1.144007] sdhci: Copyright(c) Pierre Ossman
[    1.148280] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.155136] mmc0: no vqmmc regulator found
[    1.159151] mmc0: no vmmc regulator found
[    1.199315] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.208042] usbcore: registered new interface driver usbhid
[    1.213547] usbhid: USB HID core driver
[    1.218302] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.224598] nand: Micron MT29F2G08ABAEAWP
[    1.228565] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.234512] Bad block table found at page 131008, version 0x01
[    1.240732] Bad block table found at page 130944, version 0x01
[    1.246784] 3 ofpart partitions found on MTD device pl353-nand
[    1.252569] Creating 3 MTD partitions on "pl353-nand":
[    1.257655] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.265737] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.273079] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.282089] TCP: cubic registered
[    1.285324] NET: Registered protocol family 17
[    1.290049] Registering SWP/SWPB emulation handler
[    1.295956] regulator-dummy: disabling
[    1.300350] UBI: attaching mtd1 to ubi0
[    1.826859] UBI: scanning is finished
[    1.838513] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.845594] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.852354] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.859018] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.865896] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.871876] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.878983] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1134783803
[    1.888026] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.897245] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.897250] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.901323] ALSA device list:
[    1.901327]   No soundcards found.
[    1.917714] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.946680] UBIFS: recovery needed
[    2.023308] UBIFS: recovery completed
[    2.026979] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.032930] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.042035] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.051960] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.056954] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[    2.068261] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.075459] devtmpfs: mounted
[    2.078568] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.921003] random: dd urandom read with 0 bits of entropy available
[    3.319329] 
[    3.319329] bcm54xx_config_init
[    3.929326] 
[    3.929326] bcm54xx_config_init
[    7.930171] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.936258] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   23.105997] In axi fpga driver!
[   23.109071] request_mem_region OK!
[   23.112502] AXI fpga dev virtual address is 0xdf9fc000
[   23.117568] *base_vir_addr = 0x8c510
[   23.133070] In fpga mem driver!
[   23.136143] request_mem_region OK!
[   23.139734] fpga mem virtual address is 0xe2000000
[   23.929351] 
[   23.929351] bcm54xx_config_init
[   24.559317] 
[   24.559317] bcm54xx_config_init
[   28.560168] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   28.566194] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  131.503768] random: nonblocking pool is initialized
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 8010ec4162bb885c
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[9] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[28] has core num=2
Chain[7] ASIC[38] has core num=15
Chain[7] ASIC[56] has core num=15
Chain[7] ASIC[59] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=6 on chain[7], value=940
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3 
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1376 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found= 2922 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 8010ec4162bb885c
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[2] speed=5880
get fan[5] speed=5640
get fan[2] speed=5880
get fan[5] speed=5640
get fan[2] speed=5880
get fan[5] speed=5640
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=3 : 0
Chain[J8] has backup chain_voltage=870
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=890 [91]
Chain[J6] get working chain_voltage_pic=91
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=870 [125]
Chain[J8] get working chain_voltage_pic=125
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
set_reset_hashboard = 0x00000020
set_reset_hashboard = 0x00000000
retry Chain[J6] has 0 asic
Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
set_reset_hashboard = 0x00000040
set_reset_hashboard = 0x00000000
retry Chain[J7] has 33 asic
Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
set_reset_hashboard = 0x00000080
set_reset_hashboard = 0x00000000
retry Chain[J8] has 0 asic
Chain[J7] has core num in PIC
Chain[J7] ASIC[9] has core num=1
miner total rate=4574GH/s fixed rate=4500GH/s
read PIC voltage=940 on chain[6]
Chain:6 chipnum=33
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=637
Asic[ 0]:637 
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637 
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637 
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637 
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637 

Chain:6 max freq=637
Chain:6 min freq=637


Miner fix freq ...
read PIC voltage=940 on chain[6]
Chain:6 chipnum=33
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=637
Asic[ 0]:637 
Asic[ 1]:637 Asic[ 2]:637 Asic[ 3]:637 Asic[ 4]:637 Asic[ 5]:637 Asic[ 6]:637 Asic[ 7]:637 Asic[ 8]:637 
Asic[ 9]:637 Asic[10]:637 Asic[11]:637 Asic[12]:637 Asic[13]:637 Asic[14]:637 Asic[15]:637 Asic[16]:637 
Asic[17]:637 Asic[18]:637 Asic[19]:637 Asic[20]:637 Asic[21]:637 Asic[22]:637 Asic[23]:637 Asic[24]:637 
Asic[25]:637 Asic[26]:637 Asic[27]:637 Asic[28]:637 Asic[29]:637 Asic[30]:637 Asic[31]:637 Asic[32]:637 

Chain:6 max freq=637
Chain:6 min freq=637

max freq = 637
set baud=1
Chain[J7] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[6]
get send work num :57456 on Chain[6]
wait recv nonce on chain[6]
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=00	asic[01]=00	asic[02]=00	asic[03]=00	asic[04]=00	asic[05]=00	asic[06]=00	asic[07]=00	
asic[08]=00	asic[09]=00	asic[10]=00	asic[11]=00	asic[12]=00	asic[13]=00	asic[14]=00	asic[15]=00	
asic[16]=00	asic[17]=00	asic[18]=00	asic[19]=00	asic[20]=00	asic[21]=00	asic[22]=00	asic[23]=00	
asic[24]=00	asic[25]=00	asic[26]=00	asic[27]=00	asic[28]=00	asic[29]=00	asic[30]=00	asic[31]=00	
asic[32]=00	asic[33]=00	asic[34]=00	asic[35]=00	asic[36]=00	asic[37]=00	asic[38]=00	asic[39]=00	
asic[40]=00	asic[41]=00	asic[42]=00	asic[43]=00	asic[44]=00	asic[45]=00	asic[46]=00	asic[47]=00	
asic[48]=00	asic[49]=00	asic[50]=00	asic[51]=00	asic[52]=00	asic[53]=00	asic[54]=00	asic[55]=00	
asic[56]=00	asic[57]=00	asic[58]=00	asic[59]=00	asic[60]=00	asic[61]=00	asic[62]=00	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=00

asic[01]=00

asic[02]=00

asic[03]=00

asic[04]=00

asic[05]=00

asic[06]=00

asic[07]=00

asic[08]=00

asic[09]=00

asic[10]=00

asic[11]=00

asic[12]=00

asic[13]=00

asic[14]=00

asic[15]=00

asic[16]=00

asic[17]=00

asic[18]=00

asic[19]=00

asic[20]=00

asic[21]=00

asic[22]=00

asic[23]=00

asic[24]=00

asic[25]=00

asic[26]=00

asic[27]=00

asic[28]=00

asic[29]=00

asic[30]=00

asic[31]=00

asic[32]=00

asic[33]=00

asic[34]=00

asic[35]=00

asic[36]=00

asic[37]=00

asic[38]=00

asic[39]=00

asic[40]=00

asic[41]=00

asic[42]=00

asic[43]=00

asic[44]=00

asic[45]=00

asic[46]=00

asic[47]=00

asic[48]=00

asic[49]=00

asic[50]=00

asic[51]=00

asic[52]=00

asic[53]=00

asic[54]=00

asic[55]=00

asic[56]=00

asic[57]=00

asic[58]=00

asic[59]=00

asic[60]=00

asic[61]=00

asic[62]=00



freq[00]=637	freq[01]=637	freq[02]=637	freq[03]=637	freq[04]=637	freq[05]=637	freq[06]=637	freq[07]=637	
freq[08]=637	freq[09]=637	freq[10]=637	freq[11]=637	freq[12]=637	freq[13]=637	freq[14]=637	freq[15]=637	
freq[16]=637	freq[17]=637	freq[18]=637	freq[19]=637	freq[20]=637	freq[21]=637	freq[22]=637	freq[23]=637	
freq[24]=637	freq[25]=637	freq[26]=637	freq[27]=637	freq[28]=637	freq[29]=637	freq[30]=637	freq[31]=637	
freq[32]=637	freq[33]=637	freq[34]=637	freq[35]=637	freq[36]=637	freq[37]=637	freq[38]=637	freq[39]=637	
freq[40]=637	freq[41]=637	freq[42]=637	freq[43]=637	freq[44]=637	freq[45]=637	freq[46]=637	freq[47]=637	
freq[48]=637	freq[49]=637	freq[50]=637	freq[51]=637	freq[52]=637	freq[53]=637	freq[54]=637	freq[55]=637	
freq[56]=637	freq[57]=637	freq[58]=637	freq[59]=637	freq[60]=637	freq[61]=637	freq[62]=637	

total valid nonce number:0
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:0
last_nonce_num:0
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
do heat board 8xPatten for 2 times
do open core on Chain[6]...
Done open core on Chain[6]!
start send works on chain[6]
get send work num :57456 on Chain[6]
wait recv nonce on chain[6]
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=00	asic[01]=00	asic[02]=00	asic[03]=00	asic[04]=00	asic[05]=00	asic[06]=00	asic[07]=00	
asic[08]=00	asic[09]=00	asic[10]=00	asic[11]=00	asic[12]=00	asic[13]=00	asic[14]=00	asic[15]=00	
asic[16]=00	asic[17]=00	asic[18]=00	asic[19]=00	asic[20]=00	asic[21]=01	asic[22]=00	asic[23]=00	
asic[24]=00	asic[25]=00	asic[26]=00	asic[27]=00	asic[28]=00	asic[29]=00	asic[30]=00	asic[31]=00	
asic[32]=00	asic[33]=00	asic[34]=00	asic[35]=00	asic[36]=00	asic[37]=00	asic[38]=00	asic[39]=00	
asic[40]=00	asic[41]=00	asic[42]=00	asic[43]=00	asic[44]=00	asic[45]=00	asic[46]=00	asic[47]=00	
asic[48]=00	asic[49]=00	asic[50]=00	asic[51]=00	asic[52]=00	asic[53]=00	asic[54]=00	asic[55]=00	
asic[56]=00	asic[57]=00	asic[58]=00	asic[59]=00	asic[60]=00	asic[61]=00	asic[62]=00	


Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!

asic[00]=00

asic[01]=00

asic[02]=00

asic[03]=00

asic[04]=00

asic[05]=00

asic[06]=00

asic[07]=00

asic[08]=00

asic[09]=00

asic[10]=00

asic[11]=00

asic[12]=00

asic[13]=00

asic[14]=00

asic[15]=00

asic[16]=00

asic[17]=00

asic[18]=00

asic[19]=00

asic[20]=00

asic[21]=01
asic[22]=00

asic[23]=00

asic[24]=00

asic[25]=00

asic[26]=00

asic[27]=00

asic[28]=00

asic[29]=00

asic[30]=00

asic[31]=00

asic[32]=00

asic[33]=00

asic[34]=00

asic[35]=00

asic[36]=00

asic[37]=00

asic[38]=00

asic[39]=00

asic[40]=00

asic[41]=00

asic[42]=00

asic[43]=00

asic[44]=00

asic[45]=00

asic[46]=00

asic[47]=00

asic[48]=00

asic[49]=00

asic[50]=00

asic[51]=00

asic[52]=00

asic[53]=00

asic[54]=00

asic[55]=00

asic[56]=00

asic[57]=00

asic[58]=00

asic[59]=00

asic[60]=00

asic[61]=00

asic[62]=00



freq[00]=637	freq[01]=637	freq[02]=637	freq[03]=637	freq[04]=637	freq[05]=637	freq[06]=637	freq[07]=637	
freq[08]=637	freq[09]=637	freq[10]=637	freq[11]=637	freq[12]=637	freq[13]=637	freq[14]=637	freq[15]=637	
freq[16]=637	freq[17]=637	freq[18]=637	freq[19]=637	freq[20]=637	freq[21]=637	freq[22]=637	freq[23]=637	
freq[24]=637	freq[25]=637	freq[26]=637	freq[27]=637	freq[28]=637	freq[29]=637	freq[30]=637	freq[31]=637	
freq[32]=637	freq[33]=637	freq[34]=637	freq[35]=637	freq[36]=637	freq[37]=637	freq[38]=637	freq[39]=637	
freq[40]=637	freq[41]=637	freq[42]=637	freq[43]=637	freq[44]=637	freq[45]=637	freq[46]=637	freq[47]=637	
freq[48]=637	freq[49]=637	freq[50]=637	freq[51]=637	freq[52]=637	freq[53]=637	freq[54]=637	freq[55]=637	
freq[56]=637	freq[57]=637	freq[58]=637	freq[59]=637	freq[60]=637	freq[61]=637	freq[62]=637	

total valid nonce number:1
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:1
last_nonce_num:0
chain[6]: some chip cores are not opened FAILED!
Test Patten on chain[6]: FAILED!
setStartTimePoint total_tv_start_sys=436 total_tv_end_sys=437
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=0.00000 Asic[08]=0.00000 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=0.00000 Asic[18]=0.00000 Asic[19]=0.00000 Asic[20]=0.00000 Asic[21]=0.00000 Asic[22]=3.77400 Asic[23]=0.00000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 
Asic[33]=0.00000 Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[6]
Done read temp on Chain[6]
set FAN speed according to: temp_highest=0 temp_top1[PWM_T]=0 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
set full FAN speed...
FAN PWM: 100
read_temp_func Done!
CRC error counter=3116

[mikeywith]

chances are, those boards have rested in peace,

but i have encountered a similar issue where one of the boards was showin 0 asic but i fixed that by flushing another firmware 'auto-tune'

refer to this topic and read through > https://bitcointalk.org/index.php?topic=5034849.msg46000519#msg46000519

[KurtZZ]

chances are, those boards have rested in peace,

but i have encountered a similar issue where one of the boards was showin 0 asic but i fixed that by flushing another firmware 'auto-tune'

refer to this topic and read through > https://bitcointalk.org/index.php?topic=5034849.msg46000519#msg46000519

I used your recommended auto-feq firmware, but still found zero chips:-(

[fanatic26_]

That board is toast.

Also, there is no way to know which chip is bad, just from the unreliable output of one version of firmware.

[mikeywith]

again, another newbie , asks a question, gets a few answers , then disappear,  never bother report back the result so others can make use of it.

[fanatic26_]

again, another newbie , asks a question, gets a few answers , then disappear,  never bother report back the result so others can make use of it.

That is because they didnt get the answer they wanted...happens all the time. Well either that or they argue their position against all logic.

[mikeywith]

Or they could have gotten the answer, solved their problem , and never bothered saying thanks or leaving information for the next person, i always see this shit here, telegram, and FB. Only a few people would actually report back how was their problem solved even if they did it themselves.

[zeitun]

I have a this problem with my miner hash board T9+
I lost some ASIC in chain, how can I find damage ASIC? my board did not have warranty ,so I am looking for a solution for repair them.  I had to measure the clock frequency of chip to find a faulty chip, but I could not run board out of box
the measurement is very difficult due to heat sink ,box and unavailable test point(under heat sink)
I know the connection between chip, I know a TX/RX signal go a chip and some signal(RST,CLK,CO,BO,RI) form this chip go next chip , and I thought the chip with tx/rx signal is first ASIC and next chip is second ASIC  ,.....
But it seems that I was wrong
 
please Guide me how can I find damage ASIC in t9+ hash board ?  

I hope to give your reply.

[BitMaxz]

You may need some advanced/special tools to be able to detect all dead ASIC chips and you also need hotair/blower to be able to remove the heat sink and chips.
I tried to search through youtube and I found a video and it shows how to troubleshoot and find the dead ASIC chips let me share it to you here https://youtu.be/Qh3pgPxieGg and check this one https://youtu.be/4XMDyylLhVw

Hope it helps.

[tim-bc]

the measurement is very difficult due to heat sink ,box and unavailable test point(under heat sink)

You could try taking your multimeter and attaching needles to your test probes so that you can reach the test points without having to remove heatsinks just to be able to test the chips.