[WTS] [EU] 600pcs BW L21 LITECOIN MINER with PSU, escrow, 110 EUR/pc

[Minerslav]

Cool. 
I have a BW-L21 guide if you need any tips for it https://bitcointalk.org/index.php?topic=2118409

HagssFIN has a whole topic dedicated to the miner with firmware updates and different guides. This is probably the best place to find info. I can also find the firmware link for you and post it-

[Minerslav]

Update
around 350 miners left.

[cedric10]

I buy two pieces on Ebay , i think it's you sell IT.

I found in the miner some fan parts, a connector cut from a Fan , in the two pieces , when you move it your heard moving.

Some cards have  missing plastic retention for the radiator , small white pieces to  maintain radiator to the PCB , i found in the miner this piece , i  need to remove it before start the miner.

I resume , fan conncector and plastic retention in the miner, need to remove it before start miner.

The miner dont go far 400 mhs , i use antminer L3+ and a Innosillicon , in the same environnement, run about 600 - 640 Mhs /second , with fan at 60%

The firmware is 2.8.0 and dont show the temperature of the PCB.

[Minerslav]

I buy two pieces on Ebay , i think it's you sell IT.

I found in the miner some fan parts, a connector cut from a Fan , in the two pieces , when you move it your heard moving.

Some cards have  missing plastic retention for the radiator , small white pieces to  maintain radiator to the PCB , i found in the miner this piece , i  need to remove it before start the miner.

I resume , fan conncector and plastic retention in the miner, need to remove it before start miner.

The miner dont go far 400 mhs , i use antminer L3+ and a Innosillicon , in the same environnement, run about 600 - 640 Mhs /second , with fan at 60%

The firmware is 2.8.0 and dont show the temperature of the PCB.

Hi Cedric,

I dont see you among my sales. But nonetheless i will try to help, although i would suggest trying to resolve this through EBAY. Its better to keep it official.

The plastic parts that seem so be around the miner must be due to damage during transport. Did you see any damage on the outside of the package?

The temperature not showing is normal, its the same for all BW L21 miners.

The 400MHS hashrate may be for due to shipping damage. The miner should state 550 MHS in the miners interface.

Please use the following steps:
1. remove and reconnect all PCIE power cables to the miner. Restart miner. If there is no change, please proceed to step 2.
2. Swich PSU with the other miner.  If there is no change, please proceed to step 3.
3. Sometimes during trasport some clients have found that the boards had moved. Please open the miner and push the boards down into their slots.

Let me know if the problem has resolved.

[cedric10]

I will try this, next day.

No problem with package.

i will use Ebay

Thanks

[Minerslav]

bump

[mr.petahash]

Hello, i think i was messaging with you on Ebay, could you send me your whechat or whatsapp for better comunication. Thank you

[Minerslav]

Hello, i think i was messaging with you on Ebay, could you send me your whechat or whatsapp for better comunication. Thank you

Yes its me. i have sent you a PM

[Minerslav]

bump

[rammy2k2]

bump

U have PM

[Minerslav]

thanks

[MoparMiningLLC]

can you check shipping to US? zip code 34669 - might be interested in a couple as they are low power users. ROI is about 2 months with my electricity so not too bad as long as shipping isn't crazy.

[Minerslav]

can you check shipping to US? zip code 34669 - might be interested in a couple as they are low power users. ROI is about 2 months with my electricity so not too bad as long as shipping isn't crazy.

For 1 pc it will probably be quite expensive. For how many do you want me to check?

[MoparMiningLLC]

can you check shipping to US? zip code 34669 - might be interested in a couple as they are low power users. ROI is about 2 months with my electricity so not too bad as long as shipping isn't crazy.

For 1 pc it will probably be quite expensive. For how many do you want me to check?

check on 3 - i think you said 3 would be about the same as 1 right?

[Minerslav]

can you check shipping to US? zip code 34669 - might be interested in a couple as they are low power users. ROI is about 2 months with my electricity so not too bad as long as shipping isn't crazy.

For 1 pc it will probably be quite expensive. For how many do you want me to check?

check on 3 - i think you said 3 would be about the same as 1 right?

Shipping is 86,22 EUR

[MoparMiningLLC]

Shipping is 86,22 EUR

plus with 3 miners at 110 EUR each

that works out to 416.22 EUR or about $466 USD - sound about right?

also do these run on 110v or 220v?

[Minerslav]

Shipping is 86,22 EUR

plus with 3 miners at 110 EUR each

that works out to 416.22 EUR or about $466 USD - sound about right?

also do these run on 110v or 220v?

220v

[MoparMiningLLC]

Shipping is 86,22 EUR

plus with 3 miners at 110 EUR each

that works out to 416.22 EUR or about $466 USD - sound about right?

also do these run on 110v or 220v?

220v

ok and is price right? 466 USD to ship for 3?

[Minerslav]

Shipping is 86,22 EUR

plus with 3 miners at 110 EUR each

that works out to 416.22 EUR or about $466 USD - sound about right?

also do these run on 110v or 220v?

220v

ok and is price right? 466 USD to ship for 3?

Its more like 460 USD (today).

[MoparMiningLLC]

Shipping is 86,22 EUR

plus with 3 miners at 110 EUR each

that works out to 416.22 EUR or about $466 USD - sound about right?

also do these run on 110v or 220v?

220v

ok and is price right? 466 USD to ship for 3?

Its more like 460 USD (today).

lol yea it fluctuates every few minutes - so we can loop in Phil for escrow? if so, I will start a pm with you, phil and myself and phil can take it from there