Hello guys, I'd like to ask your help of what should I do with my miner.
I had an S9 that worked for quite a while without problems, then it started to act funny. By this I mean it was running for a good 10-12-14 hours without a hitch, then it restarted and kept it doing every 15-35 minutes.
Steps I have taken:
1. Changed both of the fans. Didn't do anything, it worked for 10-14 hours and started to restart by itself again.
2.I did
NOT try a different psu but you'll see that's another problemfix for another day.
3.Tried to update to the newest firmware-first mistake-, "Antminer-S9-all-201812051512-autofreq-user-Update2UBI-NF.tar.gz" which it actually did, despite that my has a C5 control board(if im right) but now it wasn't even working even with the required pool and worker data correct and waited the recommended 20-25mins to let it boot up.
Furthermore now both the "Hardware Version" and the "BMminer version" are blank.
4. Downgraded the software, to "Antminer-S9-all-201705031838-650M-user-Update2UBI-NF.tar.gz", still nothing.
5. Wanted to upgrade to "Antminer-S9-all-201711171757-autofreq-user-Update2UBI-NF.tar.gz", but it wasn't able, and now im constantly getting a "413 Request Entity Too Large" problem.
I have tried everything that I could think of as of today, and everything I've done is listed above.
Thanks for the help in advance!
fiucsavar
Here's my kernel log
DETECT HW version=0000c50f
miner ID : 00f1438c0872f70b
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x0000000d
Find hashboard on Chain[0]
Find hashboard on Chain[2]
Find hashboard on Chain[3]
Check chain[0] PIC fw version=0x03
Check chain[2] PIC fw version=0x03
Check chain[3] PIC fw version=0x03
read pic freq and badcore num...
chain[0]: [63:22] [63:5] [63:24] [63:32] [63:56] [63:34] [63:255] [63:255]
chain[0] has no freq in PIC! Will use default freq=500 and jump over...
Check chain[0] PIC fw version=0x03
read pic freq and badcore num...
chain[2]: [63:22] [63:5] [63:24] [63:33] [63:33] [63:88] [63:255] [63:255]
chain[2] has no freq in PIC! Will use default freq=500 and jump over...
Check chain[2] PIC fw version=0x03
read pic freq and badcore num...
chain[3]: [63:22] [63:5] [63:24] [63:32] [63:87] [63:1] [63:255] [63:255]
chain[3] has no freq in PIC! Will use default freq=500 and jump over...
Check chain[3] PIC fw version=0x03
get PIC voltage=6 on chain[0], value=940
get PIC voltage=6 on chain[2], value=940
get PIC voltage=6 on chain[3], value=940
chain[0] temp offset record: 2,-72,25,-65,46,-103,62,-90
chain[0] temp chip I2C addr=0x98
chain[2] temp offset record: 2,-77,25,-105,46,-100,62,-81
chain[2] temp chip I2C addr=0x98
chain[3] temp offset record: 2,-91,25,-84,46,-85,62,-100
chain[3] temp chip I2C addr=0x98
total_exist_chain_num = 3
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
search freq for 1 times, completed chain = 3, total chain num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 298 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
This is C5 board.
Miner Type = S9
Miner compile time: Wed Dec 5 15:12:42 CST 2018 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 00f1438c0872f70b
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[0] speed=5160
get fan[0] speed=5160
get fan[0] speed=5160
get fan[0] speed=5160
get fan[1] speed=6360
get fan[0] speed=5160
get fan[1] speed=6360
chain[0]: [63:22] [63:5] [63:24] [63:32] [63:56] [63:34] [63:255] [63:255]
Check chain[0] PIC fw version=0x03
chain[2]: [63:22] [63:5] [63:24] [63:33] [63:33] [63:88] [63:255] [63:255]
Check chain[2] PIC fw version=0x03
chain[3]: [63:22] [63:5] [63:24] [63:32] [63:87] [63:1] [63:255] [63:255]
Check chain[3] PIC fw version=0x03
Chain[J1] orignal chain_voltage_pic=6 value=940
Chain[J3] orignal chain_voltage_pic=6 value=940
Chain[J4] orignal chain_voltage_pic=6 value=940
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J1] has 63 asic
Chain[J3] has 63 asic
Chain[J4] has 63 asic
Chain[J1] has no freq in PIC, set default freq=600M
Chain[J1] has no core num in PIC
Chain[J3] has no freq in PIC, set default freq=600M
Chain[J3] has no core num in PIC
Chain[J4] has no freq in PIC, set default freq=600M
Chain[J4] has no core num in PIC
read PIC voltage=940 on chain[0]
Chain:0 chipnum=63
Chain[J1] voltage added=0.0V
Chain:0 temp offset=0
Chain:0 base freq=600
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:0 max freq=600
Chain:0 min freq=600
read PIC voltage=940 on chain[2]
Chain:2 chipnum=63
Chain[J3] voltage added=0.0V
Chain:2 temp offset=0
Chain:2 base freq=600
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:2 max freq=600
Chain:2 min freq=600
read PIC voltage=940 on chain[3]
Chain:3 chipnum=63
Chain[J4] voltage added=0.0V
Chain:3 temp offset=0
Chain:3 base freq=600
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:3 max freq=600
Chain:3 min freq=600
Miner fix freq ...
read PIC voltage=940 on chain[0]
Chain:0 chipnum=63
Chain[J1] voltage added=0.0V
Chain:0 temp offset=0
Chain:0 base freq=600
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:0 max freq=600
Chain:0 min freq=600
read PIC voltage=940 on chain[2]
Chain:2 chipnum=63
Chain[J3] voltage added=0.0V
Chain:2 temp offset=0
Chain:2 base freq=600
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:2 max freq=600
Chain:2 min freq=600
read PIC voltage=940 on chain[3]
Chain:3 chipnum=63
Chain[J4] voltage added=0.0V
Chain:3 temp offset=0
Chain:3 base freq=600
Asic[ 0]:600
Asic[ 1]:600 Asic[ 2]:600 Asic[ 3]:600 Asic[ 4]:600 Asic[ 5]:600 Asic[ 6]:600 Asic[ 7]:600 Asic[ 8]:600
Asic[ 9]:600 Asic[10]:600 Asic[11]:600 Asic[12]:600 Asic[13]:600 Asic[14]:600 Asic[15]:600 Asic[16]:600
Asic[17]:600 Asic[18]:600 Asic[19]:600 Asic[20]:600 Asic[21]:600 Asic[22]:600 Asic[23]:600 Asic[24]:600
Asic[25]:600 Asic[26]:600 Asic[27]:600 Asic[28]:600 Asic[29]:600 Asic[30]:600 Asic[31]:600 Asic[32]:600
Asic[33]:600 Asic[34]:600 Asic[35]:600 Asic[36]:600 Asic[37]:600 Asic[38]:600 Asic[39]:600 Asic[40]:600
Asic[41]:600 Asic[42]:600 Asic[43]:600 Asic[44]:600 Asic[45]:600 Asic[46]:600 Asic[47]:600 Asic[48]:600
Asic[49]:600 Asic[50]:600 Asic[51]:600 Asic[52]:600 Asic[53]:600 Asic[54]:600 Asic[55]:600 Asic[56]:600
Asic[57]:600 Asic[58]:600 Asic[59]:600 Asic[60]:600 Asic[61]:600 Asic[62]:600
Chain:3 max freq=600
Chain:3 min freq=600
max freq = 600
set baud=1
Chain[J1] PIC temp offset=2,-72,25,-65,46,-103,62,-90
chain[0] temp chip I2C addr=0x98
chain[0] has no middle temp, use special fix mode.
Chain[J1] chip[4] use PIC middle temp offset=-72 typeID=1a
and two pictures of the system and miner conifguration page:
https://i.imgur.com/5Hc4GB8.jpg and
https://i.imgur.com/ZdHpiqy.jpg