Antminer S9 Braiins OS Chain ID 3 Line is missing but Hashpower from all Lines

[rymannphilippe]

Hello miners

Today i have tested the Braiins OS on my Antminer S9 13.5Th.
First try with SD Card no problems and 100% working like it should.
I can save about 1 Amp, fantastic.  Grin

After a restart one CHAIN ID Line is missing.
Restart, reflash nothing helped.
I have tested Bitmain Firmware again and it works 100% with 100% Chips and 100% Hashpower.

Back to Braiins OS and again one Line is missing but the Hashpower is from 3 Lines.

Anybody any Idea?  Huh

Thanks.

https://pbs.twimg.com/media/D21_QS0WwAIPBHW.jpg:large

[rymannphilippe]

After multiple Restart and rest of the pool data the missing line is back.

https://pbs.twimg.com/media/D22IrTrW0AICXvb.jpg:large

[BitMaxz]

I can not get what you are pointing at from the image it seems the stats of the miner is fine.

I don't have much knowledge about this OS for s9 miner so I think much better to bring this issue from Braiin OS thread from here https://bitcointalk.org/index.php?topic=5036844.0

[rymannphilippe]

Thanks BitMaxz for the help.

In the second picture you can see all three hash boards. In the first picture you only can see two bit in the summary all hash power from three boards.

My problem solved from all one but I will understand the problem.