Exploit Antminer S9 and T9+ Firmware ASICBOOST original moded , FREE RELEASE !

[mikeywith]

Thank you for your reply or for the link, recommendation ...

Most custom firmware is dedicated to those gears that are widely used, so for the S9 hydro, I don't think many people have that and that explains why most custom fm devs didn't bother to make a custom firmware for it.

I suppose you can use Vnish firmware for the Dual S9 which is basically just the normal S9 firmware but would accept 6 hash boards IIRC, so if thierry4wd can't help you with the S9 hydro you could try Vnisha (Asic.to / AwesomeMiner) you can also reach out to taserz aka asic.to and ask him about it.

[thierry4wd]

Hi, sorry about my late response.

But beware, although there is no risk, do not use the firmware for S9 (modify or not) because it is not planned for S9 Hydro, the S9 hydro has maps closer to the T9 + by design, and it just won't (or very, very badly) work!

I have the solution, as I have always claimed, there is a flaw in their "latest" firmware for the 9 series, and I have the solution ... here it is:

Please update to this version: https://file12.bitmain.com/shop-product/firmware/dcef60a1-f20f-48d0-9a90-f4c66dc74854/2019/09/24/19/Antminer-S9_Hydro-xilinx-201909201034-autofreq-user-Update2UBI-NF-sig_4038.tar.gz

once done, check that your miner works correctly ... then install my mod, initially planned for S9, but I bet 99% that it will work on the HYDRO, give me some time to modify it at the end of it make it compatible with hydro;)

EDIT : i have moded files for compatibility on S9 / S9J / S9I / T9+ / S9 Hydro !

link : https://easyupload.io/n0a5co (need install after flash "multi-option" factory firmware"

In this mod there is almost nothing, just the modify configuration page to display frequencies and voltage, and a file to force the miner to start in fixed mod!

So :
1 : install this on your S9 Hydro first :  https://file12.bitmain.com/shop-product/firmware/dcef60a1-f20f-48d0-9a90-f4c66dc74854/2019/09/24/19/Antminer-S9_Hydro-xilinx-201909201034-autofreq-user-Update2UBI-NF-sig_4038.tar.gz
2 : install my mod (keep settings enable) : https://easyupload.io/psf8wu

Thank you for leaving me your comments, that will make me happy;)

[Pyrojason]

Did you ever release your "Mod code" - the source code so multiple sources can check it out? I found an old miner with some of your firmware on it but don't really want to mess with it unless I'm sure it's solid.

[thierry4wd]

Of course, but I don't have source code for this S9 mod, for good reason, which Bmminer is absolutely not modifying, and its you can check it with my mod, if you follow the procedure, you install a original firmware, then, my mod!

I invite you to open my mod, and see that it only contains VERY little! and certainly not to bmminer modify;)

thank you for giving me your opinion after checking;)

[airmon]

T9+ links FILE NOT FOUND
 update pleas
thanks

[mikeywith]

I have been watching this thread for a long time, you have made your point very clear, you did not modify the Bmminer and you only configured the minerconfig, you also proposed to send the files for them to check it, at this point I think you should ignore all of those who keep asking you the same question, I would also thank you for releasing this for free, you are such a great asset.

Keep up the good work.

[thierry4wd]

Thank you: D, and I am also tired of often giving back the link, asking for a minimum of return, and people take advantage, without ever (or almost) saying thank you ... so, so tiring, why break my head honestly


but since I'm nice (or stupid), I updated the first post, and in addition, I even added a little feature to monitor the chips, something that I have for over 2 years, but I didn't 've never bothered to add it to my mod when I see the return number of my work lol

[o_solo_miner]

I think you did it similar to Alex from Romania, he explained it in a video on youtube and
showed how to change and compile the bminer two years ago.
https://www.youtube.com/watch?v=eD5F_KHkkqQ

[thierry4wd]

Hello, thank you for showing interest ... but, you have not read the thread ... look in more detail, I stipulate on several occasions that my mod does not contain BMMINER !!!

By design, no compilation;)

In fact, I see that no one actually reads lol, so too bad, everything is very clear in my mod, nothing hidden, there are only simple files like txt ... it suffices to open the files to see the "codes" ... give yourself a bit of trouble please: D (I'm talking about everyone there)

With pleasure

[JMan7777]

Hello,

I still have an older S9I 14.5T laying around and would give the mod a try but all the links are no longer working.

Can you please kindly provide the links to the needed S9I firmware and to your mod file.

Thx a lot.

[Bipede85]

anyone have working links for this firmware?

[thierry4wd]

hi, i edited link methode, now please join my discord for see links , is more easy, and if you need help is better for help you.

[JMan7777]

Thx.

I joined Discord but your link over there also seems to be not working.
Easyupload says: FILE NOT FOUND

Additionally which exact S9I firmware should I flash first as in the discussions various versions are mentioned.
Which one exactly is recommended?

Thx a lot.

[thierry4wd]

Hi, I usually respond quickly to discord, and I assure help! there is no need to leave repeated messages;)

the link is up to date, you can also leave your comments to give your opinion on my mod, it could be nice, and it could help some people;)

to the pleasure