antminer shows no chains

[spangyy]

received two second hand miners from alibaba site last month , after setting up realized that no hash boards preset in status page , first i tried using the dam ip report tool which did not work so using the little network knowledge i have i logged in to my router to locate address of miner when i logged in to status page i see that miner is not hashing.

im new to mining so any assistance will be appreciated.

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000297] ps7-ttc #0 at df804000, irq=43
[    0.000602] Console: colour dummy device 80x30
[    0.000632] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090244] pid_max: default: 32768 minimum: 301
[    0.090455] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090474] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092651] CPU: Testing write buffer coherency: ok
[    0.092971] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093028] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093246] L310 cache controller enabled
[    0.093266] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170988] CPU1: Booted secondary processor
[    0.260220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260348] Brought up 2 CPUs
[    0.260367] SMP: Total of 2 processors activated.
[    0.260375] CPU: All CPU(s) started in SVC mode.
[    0.261049] devtmpfs: initialized
[    0.263476] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264672] regulator-dummy: no parameters
[    0.272067] NET: Registered protocol family 16
[    0.274292] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276564] cpuidle: using governor ladder
[    0.276577] cpuidle: using governor menu
[    0.283972] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285493] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285507] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285620] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.307299] bio: create slab <bio-0> at 0
[    0.308710] vgaarb: loaded
[    0.309417] SCSI subsystem initialized
[    0.310452] usbcore: registered new interface driver usbfs
[    0.310626] usbcore: registered new interface driver hub
[    0.310852] usbcore: registered new device driver usb
[    0.311395] media: Linux media interface: v0.10
[    0.311554] Linux video capture interface: v2.00
[    0.311793] pps_core: LinuxPPS API ver. 1 registered
[    0.311805] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.311926] PTP clock support registered
[    0.312282] EDAC MC: Ver: 3.0.0
[    0.313459] Advanced Linux Sound Architecture Driver Initialized.
[    0.316205] DMA-API: preallocated 4096 debug entries
[    0.316219] DMA-API: debugging enabled by kernel config
[    0.316298] Switched to clocksource arm_global_timer
[    0.337307] NET: Registered protocol family 2
[    0.337961] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.338017] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.338102] TCP: Hash tables configured (established 4096 bind 4096)
[    0.338148] TCP: reno registered
[    0.338164] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.338194] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.338426] NET: Registered protocol family 1
[    0.338764] RPC: Registered named UNIX socket transport module.
[    0.338777] RPC: Registered udp transport module.
[    0.338786] RPC: Registered tcp transport module.
[    0.338794] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338807] PCI: CLS 0 bytes, default 64
[    0.339241] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.341235] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.343333] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343524] msgmni has been set to 967
[    0.344284] io scheduler noop registered
[    0.344296] io scheduler deadline registered
[    0.344333] io scheduler cfq registered (default)
[    0.353833] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.353853] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.476670] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.044143] console [ttyPS0] enabled
[    1.048418] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.056019] [drm] Initialized drm 1.1.0 20060810
[    1.073005] brd: module loaded
[    1.082392] loop: module loaded
[    1.091824] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.097665] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.105401] libphy: XEMACPS mii bus: probed
[    1.109801] ------------- phy_id = 0x3625e62
[    1.114514] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.123320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.129966] ehci-pci: EHCI PCI platform driver
[    1.137366] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.144175] usbcore: registered new interface driver usb-storage
[    1.151104] mousedev: PS/2 mouse device common for all mice
[    1.157243] i2c /dev entries driver
[    1.164124] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.169687] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.175572] Xilinx Zynq CpuIdle Driver started
[    1.180446] sdhci: Secure Digital Host Controller Interface driver
[    1.186612] sdhci: Copyright(c) Pierre Ossman
[    1.190878] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.197693] mmc0: no vqmmc regulator found
[    1.201706] mmc0: no vmmc regulator found
[    1.246316] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.254980] usbcore: registered new interface driver usbhid
[    1.260489] usbhid: USB HID core driver
[    1.265195] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.271493] nand: Micron MT29F2G08ABAEAWP
[    1.275460] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281399] Bad block table found at page 131008, version 0x01
[    1.287630] Bad block table found at page 130944, version 0x01
[    1.293677] 3 ofpart partitions found on MTD device pl353-nand
[    1.299464] Creating 3 MTD partitions on "pl353-nand":
[    1.304554] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312596] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.319914] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.330665] TCP: cubic registered
[    1.333902] NET: Registered protocol family 17
[    1.338603] Registering SWP/SWPB emulation handler
[    1.344503] regulator-dummy: disabling
[    1.348843] UBI: attaching mtd1 to ubi0
[    1.876937] UBI: scanning is finished
[    1.888610] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.895662] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.902457] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.909135] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.915972] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.921983] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.929094] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1298204553
[    1.938124] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.947340] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.947346] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.951292] ALSA device list:
[    1.951295]   No soundcards found.
[    1.967672] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.996689] UBIFS: recovery needed
[    2.045354] UBIFS: recovery completed
[    2.049043] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.054969] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.064112] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.073993] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.079029] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 18E255BB-788D-4935-A7C9-507B6B7DB812, small LPT model
[    2.090549] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.097763] devtmpfs: mounted
[    2.100871] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.934481] random: dd urandom read with 1 bits of entropy available
[    3.346315] 
[    3.346315] bcm54xx_config_init
[    3.956342] 
[    3.956342] bcm54xx_config_init
[    7.957166] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.963271] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   22.536752] In axi fpga driver!
[   22.539822] request_mem_region OK!
[   22.543212] AXI fpga dev virtual address is 0xdf9fe000
[   22.548352] *base_vir_addr = 0xc51e
[   22.562887] In fpga mem driver!
[   22.566193] request_mem_region OK!
[   22.569797] fpga mem virtual address is 0xe2000000
[   23.366324] 
[   23.366324] bcm54xx_config_init
[   23.996352] 
[   23.996352] bcm54xx_config_init
[   27.997174] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   28.003278] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
log_level = 4
This is XILINX board. Totalram:       507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f93000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d8c000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 8164840268808814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[22] has core num=1
Chain[5] ASIC[50] has core num=1
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[44] has core num=7
Chain[6] ASIC[47] has core num=2
Chain[6] ASIC[48] has core num=1
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,0,0,0,0,0,37,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,-5,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,0,0,0,0,0,37,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1436 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Mar 4 11:45:08 CST 2019 type: Antminer S9i
miner ID : 8164840268808814
Checking fans...
get fan[4] speed=5760
get fan[4] speed=5760
get fan[5] speed=5880
get fan[4] speed=5760
get fan[5] speed=5880
get fan[4] speed=5760
get fan[5] speed=5880
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has lpm backup chain_voltage=870
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x0f 0x4b 0x0b 0x4b 0x04 0x4b 0x0b 0x4b 0x00 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x01 0x4b 0x01 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x05 0x4b 0x07 0x4b 0x23 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has lpm backup chain_voltage=870
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has lpm backup chain_voltage=870
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=870 [125]
Chain[J6] get working chain_voltage_pic=125
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=870 [125]
Chain[J7] get working chain_voltage_pic=125
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=870 [125]
Chain[J8] get working chain_voltage_pic=125
Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic

[BitMaxz]

Can you try to restore factory reset the miner first and check the kernel logs again if it still show "ASIC 0" or no chain.
Then reattach the 18 pin cable or replace it with working cable from another s9 (If you have extra) Check your power supply if the out put is 12v.

If it doesn't work try to upgrade the miner with this firmware "Antminer-S9-all-201711171757-autofreq-user-Update2UBI-NF.tar.gz"

[spangyy]

thanks for response appreciated , i did a reset by holding down the ip reporter button then wait for miner to resume after which i see that it shows default mining pools from antpool but still no asic information nor hashing info its like no hashboards are present , however i tried updating with latest firmware for s9i from the bitmain site and still nothing

[BitMaxz]

thanks for response appreciated , i did a reset by holding down the ip reporter button then wait for miner to resume after which i see that it shows default mining pools from antpool but still no asic information nor hashing info its like no hashboards are present , however i tried updating with latest firmware for s9i from the bitmain site and still nothing

Your miner is s9 without "i" did you successfully flash it with s9i firmware? Maybe this is the reason why you can't make your hashboard work.

Beware on latest version 2019 firmware because it may disable your SSH access so be careful 2018 firmware is fine but the firmware for me is the firmware that I already mentioned above.

Just update here and let's troubleshoot the miner.

Check this useful troubleshooting guide below.

- Possible problems and solutions for S7, S9 (fixed frequency) & L3+
- Test Hashboard one by one

[spangyy]

actually the version that is displayed on miner is s9i 14th although the hashboards say s9 inscribed on them , when i get home will try the methods you outlined and upload the kernel as i go along , its just a frustrating that i spent us500 + shipping + electrical setup and this whats happening

https://imgur.com/whMmOXV

[mikeywith]

... however i tried updating with latest firmware for s9i from the bitmain site and still nothing.

ok congratulations, you simply locked yourself out , now it does not matter what you do, you are left with only 1 solution which is to flash another firmware using an SDcard

there were a few things that you could have tried, but it's too late now, since the latest firmware simply locks your miner, and by the way , yes you do have an antiminer S9i , so make sure you flash the proper firmware, but i would go with Braiins OS to see if it does make any difference.

but before you do all that, can you try a different PSU?

[Artemis3]

No need to make such drama, just boot Braiins OS from a micro SD card. Next version will allow installing from the SD card itself into the controller's NAND, once that is done there is a procedure to return back to factory firmware.

Of course if i were you i would stay with Braiins OS.

[spangyy]

No need to make such drama, just boot Braiins OS from a micro SD card. Next version will allow installing from the SD card itself into the controller's NAND, once that is done there is a procedure to return back to factory firmware.

Of course if i were you i would stay with Braiins OS.

ok i install the braiins os by following instructions on site now the red light stays on and i cant access miner , should i try flashing with a previous firmware for s9i?

here is kernel log from second s9i miner seems like they both saying same thing:

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000294] ps7-ttc #0 at df804000, irq=43
[    0.000595] Console: colour dummy device 80x30
[    0.000625] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040197] pid_max: default: 32768 minimum: 301
[    0.040404] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040424] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042584] CPU: Testing write buffer coherency: ok
[    0.042894] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042950] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043171] L310 cache controller enabled
[    0.043191] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120985] CPU1: Booted secondary processor
[    0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210349] Brought up 2 CPUs
[    0.210368] SMP: Total of 2 processors activated.
[    0.210376] CPU: All CPU(s) started in SVC mode.
[    0.211029] devtmpfs: initialized
[    0.213459] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214649] regulator-dummy: no parameters
[    0.221993] NET: Registered protocol family 16
[    0.224158] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226430] cpuidle: using governor ladder
[    0.226443] cpuidle: using governor menu
[    0.233787] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235294] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235307] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235419] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257051] bio: create slab <bio-0> at 0
[    0.258441] vgaarb: loaded
[    0.259139] SCSI subsystem initialized
[    0.259999] usbcore: registered new interface driver usbfs
[    0.260167] usbcore: registered new interface driver hub
[    0.260724] usbcore: registered new device driver usb
[    0.262047] media: Linux media interface: v0.10
[    0.262217] Linux video capture interface: v2.00
[    0.262460] pps_core: LinuxPPS API ver. 1 registered
[    0.262471] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262594] PTP clock support registered
[    0.262946] EDAC MC: Ver: 3.0.0
[    0.264142] Advanced Linux Sound Architecture Driver Initialized.
[    0.266853] DMA-API: preallocated 4096 debug entries
[    0.266867] DMA-API: debugging enabled by kernel config
[    0.266936] Switched to clocksource arm_global_timer
[    0.286356] NET: Registered protocol family 2
[    0.287048] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287105] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287189] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287234] TCP: reno registered
[    0.287251] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287279] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.287525] NET: Registered protocol family 1
[    0.287815] RPC: Registered named UNIX socket transport module.
[    0.287827] RPC: Registered udp transport module.
[    0.287835] RPC: Registered tcp transport module.
[    0.287844] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.287856] PCI: CLS 0 bytes, default 64
[    0.288277] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290252] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292307] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.292497] msgmni has been set to 967
[    0.293260] io scheduler noop registered
[    0.293273] io scheduler deadline registered
[    0.293310] io scheduler cfq registered (default)
[    0.305737] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.305757] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.429111] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.996939] console [ttyPS0] enabled
[    1.001188] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.008804] [drm] Initialized drm 1.1.0 20060810
[    1.025942] brd: module loaded
[    1.035330] loop: module loaded
[    1.044743] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.050723] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.058489] libphy: XEMACPS mii bus: probed
[    1.062856] ------------- phy_id = 0x3625e62
[    1.067595] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.076169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.082813] ehci-pci: EHCI PCI platform driver
[    1.090042] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.096832] usbcore: registered new interface driver usb-storage
[    1.103689] mousedev: PS/2 mouse device common for all mice
[    1.109867] i2c /dev entries driver
[    1.116720] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.122248] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.128248] Xilinx Zynq CpuIdle Driver started
[    1.133092] sdhci: Secure Digital Host Controller Interface driver
[    1.139294] sdhci: Copyright(c) Pierre Ossman
[    1.143562] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.150375] mmc0: no vqmmc regulator found
[    1.154389] mmc0: no vmmc regulator found
[    1.196963] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205648] usbcore: registered new interface driver usbhid
[    1.211152] usbhid: USB HID core driver
[    1.215858] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222158] nand: Micron MT29F2G08ABAEAWP
[    1.226120] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232057] Bad block table found at page 131008, version 0x01
[    1.238276] Bad block table found at page 130944, version 0x01
[    1.244327] 3 ofpart partitions found on MTD device pl353-nand
[    1.250111] Creating 3 MTD partitions on "pl353-nand":
[    1.255202] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263249] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270544] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281286] TCP: cubic registered
[    1.284519] NET: Registered protocol family 17
[    1.289230] Registering SWP/SWPB emulation handler
[    1.295085] regulator-dummy: disabling
[    1.299402] UBI: attaching mtd1 to ubi0
[    1.823827] UBI: scanning is finished
[    1.835430] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.842512] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849275] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.855940] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.862817] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.868799] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.875906] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1298204553
[    1.884948] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894164] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.894170] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898104] ALSA device list:
[    1.898108]   No soundcards found.
[    1.914462] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.943335] UBIFS: recovery needed
[    2.026008] UBIFS: recovery completed
[    2.029687] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.035613] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.044745] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.054631] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.059671] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 18E255BB-788D-4935-A7C9-507B6B7DB812, small LPT model
[    2.070723] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.077897] devtmpfs: mounted
[    2.081004] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.913073] random: dd urandom read with 1 bits of entropy available
[    3.296979] 
[    3.296979] bcm54xx_config_init
[    3.906982] 
[    3.906982] bcm54xx_config_init
[   39.907806] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   39.913898] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   40.065493] In axi fpga driver!
[   40.068593] request_mem_region OK!
[   40.071955] AXI fpga dev virtual address is 0xdf9fe000
[   40.077098] *base_vir_addr = 0xc51e
[   40.091826] In fpga mem driver!
[   40.095057] request_mem_region OK!
[   40.098649] fpga mem virtual address is 0xe2000000
[   40.896966] 
[   40.896966] bcm54xx_config_init
[   41.526958] 
[   41.526958] bcm54xx_config_init
[   64.527812] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   64.533834] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  336.629515] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram:       507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6ff7000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5df0000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 80389d4a5c208814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[16] has core num=5
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[45] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,-5,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-5,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-5,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
total_exist_chain_num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1371 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=12702 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Mar 4 11:45:08 CST 2019 type: Antminer S9i
miner ID : 80389d4a5c208814
Checking fans...
get fan[4] speed=4800
get fan[4] speed=4800
get fan[5] speed=4920
get fan[4] speed=4800
get fan[5] speed=4920
get fan[4] speed=4800
get fan[5] speed=4920
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x0f 0x4a 0x0b 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has lpm backup chain_voltage=820
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x0f 0x4b 0x0b 0x4b 0x04 0x4b 0x0b 0x4b 0x00 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x01 0x4b 0x01 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x05 0x4b 0x07 0x4b 0x23 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has lpm backup chain_voltage=820
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x0f 0x4b 0x0b 0x4b 0x04 0x4b 0x0b 0x4b 0x00 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x01 0x4b 0x01 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x05 0x4b 0x07 0x4b 0x23 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has lpm backup chain_voltage=820
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=820 [210]
Chain[J6] get working chain_voltage_pic=210
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=820 [210]
Chain[J7] get working chain_voltage_pic=210
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=820 [210]
Chain[J8] get working chain_voltage_pic=210
Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=0

[Artemis3]

ok i install the braiins os by following instructions on site now the red light stays on and i cant access miner , should i try flashing with a previous firmware for s9i?

Do you mean boot from the SD card by moving a jumper? That procedure is not permanent, you can simply take the sd card out and move the jumper back, and its like nothing ever happened. It doesn't "install" it, only boots from it. If you can't boot Braiins OS using this method maybe your miner isn't supported, i don't really know what the difference is with S9i vs S9, i have only seen and worked with S9.

When you boot with Braiins OS you should try to find the miner IP again, its probably using dhcp, it won't use a previous configuration.

[spangyy]

im able to locate ip address ,  i booted from sd but the red light just stays on . maybe its for s9 model only not sure.


this is the image file i used based on the latest release

braiins-os_am1-s9_sd_2019-02-21-0-572dd48c.img


ok i was able to flash miner with braiins os through sd card boot , however the model dsplayed is : AntMiner S9 Miner Control Board. is it that i dont have a s9i miner has originally seen on the miner label?

please also  see kernel log

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.4.0-xilinx-gc871e5378170-dirty (build@3c3be5cae4a2) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3560-79f57e422d) ) #0 SMP PREEMPT Thu Feb 21 11:14:59 2019
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: AntMiner S9 Miner Control Board
[    0.000000] cma: Reserved 16 MiB at 0x1e000000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c07baf80, node_mem_map ddc10000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 12 pages/cpu @ddbef000 s18944 r8192 d22016 u49152
[    0.000000] pcpu-alloc: s18944 r8192 d22016 u49152 alloc=12*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: console=ttyPS0,115200 root=/dev/ram0 r rootfstype=squashfs mtdparts=pl35x-nand:512k(boot),2560k(uboot),2m(fpga1),2m(fpga2),512k(uboot_env),512k(miner_cfg),22m(recovery),95m(firmware1),95m(firmware2) earlyprintk
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 472892K/507904K available (5543K kernel code, 239K rwdata, 1840K rodata, 260K init, 221K bss, 18628K reserved, 16384K cma-reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff800000   ( 512 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc073e140   (7385 kB)
[    0.000000]       .init : 0xc073f000 - 0xc0780000   ( 260 kB)
[    0.000000]       .data : 0xc0780000 - 0xc07bbee0   ( 240 kB)
[    0.000000]        .bss : 0xc07bbee0 - 0xc07f3404   ( 222 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df800000
[    0.000000] L2C: platform modifies aux control register: 0x02060000 -> 0x32460000
[    0.000000] L2C: DT/platform modifies aux control register: 0x02060000 -> 0x32460000
[    0.000000] L2C-310 erratum 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 8 ways, 512 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x46460001
[    0.000000] zynq_clock_init: clkc starts at df800100
[    0.000000] Zynq clock init
[    0.000011] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
[    0.000034] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
[    0.000293] clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
[    0.000329] ps7-ttc #0 at df808000, irq=18
[    0.000443] Console: colour dummy device 80x30
[    0.000460] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090256] pid_max: default: 32768 minimum: 301
[    0.090364] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090377] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090876] CPU: Testing write buffer coherency: ok
[    0.091083] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.091176] Setting up static identity map for 0x8280 - 0x82d8
[    0.260246] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260318] Brought up 2 CPUs
[    0.260337] SMP: Total of 2 processors activated (2664.03 BogoMIPS).
[    0.260345] CPU: All CPU(s) started in SVC mode.
[    0.262823] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.263228] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.264116] pinctrl core: initialized pinctrl subsystem
[    0.265367] NET: Registered protocol family 16
[    0.267354] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.290237] cpuidle: using governor ladder
[    0.320222] cpuidle: using governor menu
[    0.326918] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.391294] vgaarb: loaded
[    0.391751] SCSI subsystem initialized
[    0.392123] usbcore: registered new interface driver usbfs
[    0.392211] usbcore: registered new interface driver hub
[    0.392290] usbcore: registered new device driver usb
[    0.392615] media: Linux media interface: v0.10
[    0.392694] Linux video capture interface: v2.00
[    0.392766] pps_core: LinuxPPS API ver. 1 registered
[    0.392778] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.392823] PTP clock support registered
[    0.392909] EDAC MC: Ver: 3.0.0
[    0.393678] Advanced Linux Sound Architecture Driver Initialized.
[    0.394897] clocksource: Switched to clocksource arm_global_timer
[    0.403796] NET: Registered protocol family 2
[    0.404608] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.404672] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.404757] TCP: Hash tables configured (established 4096 bind 4096)
[    0.404812] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.404844] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.405107] NET: Registered protocol family 1
[    0.405792] RPC: Registered named UNIX socket transport module.
[    0.405806] RPC: Registered udp transport module.
[    0.405814] RPC: Registered tcp transport module.
[    0.405823] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.405856] PCI: CLS 0 bytes, default 64
[    0.406089] Trying to unpack rootfs image as initramfs...
[    0.406330] rootfs image is not initramfs (junk in compressed archive); looks like an initrd
[    0.432655] Freeing initrd memory: 5920K (c7a38000 - c8000000)
[    0.434055] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.444860] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.447412] io scheduler noop registered
[    0.447435] io scheduler deadline registered
[    0.447489] io scheduler cfq registered (default)
[    0.449450] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
[    0.449472] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.450340] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 158, base_baud = 3125000) is a xuartps
[    1.061486] console [ttyPS0] enabled
[    1.065540] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df81c000
[    1.072663] [drm] Initialized drm 1.1.0 20060810
[    1.088056] brd: module loaded
[    1.097170] loop: module loaded
[    1.102877] CAN device driver interface
[    1.107216] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.112960] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.120333] libphy: XEMACPS mii bus: probed
[    1.135199] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 31
[    1.143550] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.150038] ehci-pci: EHCI PCI platform driver
[    1.154645] usbcore: registered new interface driver usb-storage
[    1.161929] mousedev: PS/2 mouse device common for all mice
[    1.167891] i2c /dev entries driver
[    1.173291] EDAC MC: ECC not enabled
[    1.177044] Xilinx Zynq CpuIdle Driver started
[    1.181753] sdhci: Secure Digital Host Controller Interface driver
[    1.187869] sdhci: Copyright(c) Pierre Ossman
[    1.192195] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.199252] sdhci-arasan e0100000.ps7-sdio: No vmmc regulator found
[    1.205461] sdhci-arasan e0100000.ps7-sdio: No vqmmc regulator found
[    1.244951] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.257909] ledtrig-cpu: registered to indicate activity on CPUs
[    1.264516] usbcore: registered new interface driver usbhid
[    1.270051] usbhid: USB HID core driver
[    1.280828] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.289147] nand: Micron MT29F2G08ABAEAWP
[    1.293088] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.300666] nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
[    1.312130] Bad block table found at page 131008, version 0x01
[    1.318381] Bad block table found at page 130944, version 0x01
[    1.324454] 9 cmdlinepart partitions found on MTD device pl35x-nand
[    1.330660] Creating 9 MTD partitions on "pl35x-nand":
[    1.335772] 0x000000000000-0x000000080000 : "boot"
[    1.341622] 0x000000080000-0x000000300000 : "uboot"
[    1.355743] mmc0: new high speed SD card at address 0002
[    1.357427] 0x000000300000-0x000000500000 : "fpga1"
[    1.366395] mmcblk0: mmc0:0002       1.86 GiB 
[    1.371400] 0x000000500000-0x000000700000 : "fpga2"
[    1.376337]  mmcblk0: p1 p2
[    1.387294] 0x000000700000-0x000000780000 : "uboot_env"
[    1.403369] 0x000000780000-0x000000800000 : "miner_cfg"
[    1.409518] 0x000000800000-0x000001e00000 : "recovery"
[    1.425561] 0x000001e00000-0x000007d00000 : "firmware1"
[    1.441763] 0x000007d00000-0x00000dc00000 : "firmware2"
[    1.460476] nf_conntrack version 0.5.0 (7737 buckets, 30948 max)
[    1.468377] NET: Registered protocol family 10
[    1.474007] sit: IPv6 over IPv4 tunneling driver
[    1.479378] NET: Registered protocol family 17
[    1.483796] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.496354] can: controller area network core (rev 20120528 abi 9)
[    1.502557] NET: Registered protocol family 29
[    1.506952] can: raw protocol (rev 20120528)
[    1.511175] can: broadcast manager protocol (rev 20120528 t)
[    1.516840] can: netlink gateway (rev 20130117) max_hops=1
[    1.522482] 8021q: 802.1Q VLAN Support v1.8
[    1.526952] Registering SWP/SWPB emulation handler
[    1.533222] hctosys: unable to open rtc device (rtc0)
[    1.542829] ALSA device list:
[    1.545758]   No soundcards found.
[    1.549542] RAMDISK: squashfs filesystem found at block 0
[    1.554905] RAMDISK: Loading 5920KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done.<6>[    1.712153] VFS: Mounted root (squashfs filesystem) readonly on device 1:0.
[    1.719432] Freeing unused kernel memory: 260K (c073f000 - c0780000)
[    2.124796] init: Console is alive
[    2.442103] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    2.522985] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    2.532052] init: - preinit -
[    3.134282] random: jshn urandom read with 1 bits of entropy available
[    3.315512] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.535385] mount_root: rootdisk overlay filesystem has not been formatted yet
[    7.088206] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null)
[    7.315956] xemacps e000b000.ps7-ethernet: Set clk to 25000000 Hz
[    7.322106] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[    7.327819] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.585812] block: attempting to load /etc/config/fstab
[    7.669855] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: 
[    7.745078] mount_root: switched to extroot
[    7.752845] urandom-seed: Seed file not found (/etc/urandom.seed)
[    8.326776] procd: - early -
[    8.953626] procd: - ubus -
[    9.122328] procd: - init -
[    9.382826] kmodloader: loading kernel modules from /etc/modules.d/*
[    9.392809] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.405797] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.546246] xt_time: kernel timezone is -0000
[    9.556827] kmodloader: done loading kernel modules from /etc/modules.d/*
[   13.236783] device eth0 entered promiscuous mode
[   13.245335] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[   17.235875] xemacps e000b000.ps7-ethernet: Set clk to 25000000 Hz
[   17.241895] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   17.247678] br-lan: port 1(eth0) entered forwarding state
[   17.253037] br-lan: port 1(eth0) entered forwarding state
[   17.258511] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   19.244903] br-lan: port 1(eth0) entered forwarding state
[  145.360329] random: nonblocking pool is initialized

[BitMaxz]

Let me ask about this image below.

https://imgur.com/whMmOXV

It seems that you have extra miner to test the hashboard why not get the control board from the working one and replace it to the other miner with "no chain" and then lets see if it a hardboard issue or only from control board software/hardware.

It seems that you already switch to Braiin OS I don't have much  knowledge about this OS and I don't think if it will work on s9i much better to revert it back the firmware and troubleshoot first if the problem is related to software or a hardware issue.

If you don't know how to revert it back you can follow the guide from here S9 series (S9, S9i, S9j, S9 Hydro) Control Board Program Recovery.

But if you decided to stay using Braiin OS and test then start to configure the pool to test and let's see if it works.
Check this video https://www.youtube.com/watch?v=-W3N0HCObbA.

[Artemis3]

He is wrong. You do NOT install Braiins OS by booting from SD Card, its never "flashed", you are simply running from the SD card. Next version of Braiins OS will allow actual installing (into the NAND flash of the controller), but this feature is not available yet. If he takes out the card Braiins OS is gone.

To "flash" Braiins OS in the current version, you need a working factory firmware with ssh access (no 2019) and a separate computer to either use the web UI firmware upgrade method or the much safer python script that makes a backup before flashing and can always be reverted back.

When the next Braiins OS version comes out he will have an option in the UI to actually "Flash" it into the NAND controller, then he can take out the sd card, move the jumper back and it will still boot Braiins OS.

If Braiins OS is working then its best to just use it. It doesn't matter if it says S9 or S9i as long as it works.

[spangyy]

yes i have two miners but they both not showing asic information , when i flashed the board with braiins os i did not connect the hashboards so when i reach home will try to see if switching to braiins os will show the hashboards

here are the kernel logs for both miners

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000297] ps7-ttc #0 at df804000, irq=43
[    0.000602] Console: colour dummy device 80x30
[    0.000632] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090244] pid_max: default: 32768 minimum: 301
[    0.090455] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090474] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092651] CPU: Testing write buffer coherency: ok
[    0.092971] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.093028] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093246] L310 cache controller enabled
[    0.093266] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170988] CPU1: Booted secondary processor
[    0.260220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260348] Brought up 2 CPUs
[    0.260367] SMP: Total of 2 processors activated.
[    0.260375] CPU: All CPU(s) started in SVC mode.
[    0.261049] devtmpfs: initialized
[    0.263476] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264672] regulator-dummy: no parameters
[    0.272067] NET: Registered protocol family 16
[    0.274292] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276564] cpuidle: using governor ladder
[    0.276577] cpuidle: using governor menu
[    0.283972] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.285493] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.285507] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285620] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.307299] bio: create slab <bio-0> at 0
[    0.308710] vgaarb: loaded
[    0.309417] SCSI subsystem initialized
[    0.310452] usbcore: registered new interface driver usbfs
[    0.310626] usbcore: registered new interface driver hub
[    0.310852] usbcore: registered new device driver usb
[    0.311395] media: Linux media interface: v0.10
[    0.311554] Linux video capture interface: v2.00
[    0.311793] pps_core: LinuxPPS API ver. 1 registered
[    0.311805] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.311926] PTP clock support registered
[    0.312282] EDAC MC: Ver: 3.0.0
[    0.313459] Advanced Linux Sound Architecture Driver Initialized.
[    0.316205] DMA-API: preallocated 4096 debug entries
[    0.316219] DMA-API: debugging enabled by kernel config
[    0.316298] Switched to clocksource arm_global_timer
[    0.337307] NET: Registered protocol family 2
[    0.337961] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.338017] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.338102] TCP: Hash tables configured (established 4096 bind 4096)
[    0.338148] TCP: reno registered
[    0.338164] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.338194] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.338426] NET: Registered protocol family 1
[    0.338764] RPC: Registered named UNIX socket transport module.
[    0.338777] RPC: Registered udp transport module.
[    0.338786] RPC: Registered tcp transport module.
[    0.338794] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338807] PCI: CLS 0 bytes, default 64
[    0.339241] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.341235] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.343333] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.343524] msgmni has been set to 967
[    0.344284] io scheduler noop registered
[    0.344296] io scheduler deadline registered
[    0.344333] io scheduler cfq registered (default)
[    0.353833] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.353853] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.476670] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.044143] console [ttyPS0] enabled
[    1.048418] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.056019] [drm] Initialized drm 1.1.0 20060810
[    1.073005] brd: module loaded
[    1.082392] loop: module loaded
[    1.091824] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.097665] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.105401] libphy: XEMACPS mii bus: probed
[    1.109801] ------------- phy_id = 0x3625e62
[    1.114514] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.123320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.129966] ehci-pci: EHCI PCI platform driver
[    1.137366] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.144175] usbcore: registered new interface driver usb-storage
[    1.151104] mousedev: PS/2 mouse device common for all mice
[    1.157243] i2c /dev entries driver
[    1.164124] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.169687] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.175572] Xilinx Zynq CpuIdle Driver started
[    1.180446] sdhci: Secure Digital Host Controller Interface driver
[    1.186612] sdhci: Copyright(c) Pierre Ossman
[    1.190878] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.197693] mmc0: no vqmmc regulator found
[    1.201706] mmc0: no vmmc regulator found
[    1.246316] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.254980] usbcore: registered new interface driver usbhid
[    1.260489] usbhid: USB HID core driver
[    1.265195] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.271493] nand: Micron MT29F2G08ABAEAWP
[    1.275460] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281399] Bad block table found at page 131008, version 0x01
[    1.287630] Bad block table found at page 130944, version 0x01
[    1.293677] 3 ofpart partitions found on MTD device pl353-nand
[    1.299464] Creating 3 MTD partitions on "pl353-nand":
[    1.304554] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312596] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.319914] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.330665] TCP: cubic registered
[    1.333902] NET: Registered protocol family 17
[    1.338603] Registering SWP/SWPB emulation handler
[    1.344503] regulator-dummy: disabling
[    1.348843] UBI: attaching mtd1 to ubi0
[    1.876937] UBI: scanning is finished
[    1.888610] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.895662] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.902457] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.909135] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.915972] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.921983] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.929094] UBI: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1298204553
[    1.938124] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.947340] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.947346] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.951292] ALSA device list:
[    1.951295]   No soundcards found.
[    1.967672] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.996689] UBIFS: recovery needed
[    2.045354] UBIFS: recovery completed
[    2.049043] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.054969] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.064112] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.073993] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.079029] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 18E255BB-788D-4935-A7C9-507B6B7DB812, small LPT model
[    2.090549] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.097763] devtmpfs: mounted
[    2.100871] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.934481] random: dd urandom read with 1 bits of entropy available
[    3.346315] 
[    3.346315] bcm54xx_config_init
[    3.956342] 
[    3.956342] bcm54xx_config_init
[    7.957166] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[    7.963271] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[   22.536752] In axi fpga driver!
[   22.539822] request_mem_region OK!
[   22.543212] AXI fpga dev virtual address is 0xdf9fe000
[   22.548352] *base_vir_addr = 0xc51e
[   22.562887] In fpga mem driver!
[   22.566193] request_mem_region OK!
[   22.569797] fpga mem virtual address is 0xe2000000
[   23.366324] 
[   23.366324] bcm54xx_config_init
[   23.996352] 
[   23.996352] bcm54xx_config_init
[   27.997174] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[   28.003278] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
log_level = 4
This is XILINX board. Totalram:       507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6f93000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5d8c000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 8164840268808814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[22] has core num=1
Chain[5] ASIC[50] has core num=1
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[44] has core num=7
Chain[6] ASIC[47] has core num=2
Chain[6] ASIC[48] has core num=1
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,0,0,0,0,0,37,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,-5,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,0,0,0,0,0,37,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
total_exist_chain_num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1436 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Mar 4 11:45:08 CST 2019 type: Antminer S9i
miner ID : 8164840268808814
Checking fans...
get fan[4] speed=5760
get fan[4] speed=5760
get fan[5] speed=5880
get fan[4] speed=5760
get fan[5] speed=5880
get fan[4] speed=5760
get fan[5] speed=5880
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has lpm backup chain_voltage=870
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x0f 0x4b 0x0b 0x4b 0x04 0x4b 0x0b 0x4b 0x00 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x01 0x4b 0x01 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x05 0x4b 0x07 0x4b 0x23 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has lpm backup chain_voltage=870
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x00 0x4a 0x00 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has lpm backup chain_voltage=870
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=870 [125]
Chain[J6] get working chain_voltage_pic=125
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=870 [125]
Chain[J7] get working chain_voltage_pic=125
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=870 [125]
Chain[J8] get working chain_voltage_pic=125
Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000294] ps7-ttc #0 at df804000, irq=43
[    0.000595] Console: colour dummy device 80x30
[    0.000625] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040197] pid_max: default: 32768 minimum: 301
[    0.040404] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040424] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042584] CPU: Testing write buffer coherency: ok
[    0.042894] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042950] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.043171] L310 cache controller enabled
[    0.043191] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.120985] CPU1: Booted secondary processor
[    0.210218] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210349] Brought up 2 CPUs
[    0.210368] SMP: Total of 2 processors activated.
[    0.210376] CPU: All CPU(s) started in SVC mode.
[    0.211029] devtmpfs: initialized
[    0.213459] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214649] regulator-dummy: no parameters
[    0.221993] NET: Registered protocol family 16
[    0.224158] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226430] cpuidle: using governor ladder
[    0.226443] cpuidle: using governor menu
[    0.233787] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235294] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235307] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235419] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257051] bio: create slab <bio-0> at 0
[    0.258441] vgaarb: loaded
[    0.259139] SCSI subsystem initialized
[    0.259999] usbcore: registered new interface driver usbfs
[    0.260167] usbcore: registered new interface driver hub
[    0.260724] usbcore: registered new device driver usb
[    0.262047] media: Linux media interface: v0.10
[    0.262217] Linux video capture interface: v2.00
[    0.262460] pps_core: LinuxPPS API ver. 1 registered
[    0.262471] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262594] PTP clock support registered
[    0.262946] EDAC MC: Ver: 3.0.0
[    0.264142] Advanced Linux Sound Architecture Driver Initialized.
[    0.266853] DMA-API: preallocated 4096 debug entries
[    0.266867] DMA-API: debugging enabled by kernel config
[    0.266936] Switched to clocksource arm_global_timer
[    0.286356] NET: Registered protocol family 2
[    0.287048] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287105] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287189] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287234] TCP: reno registered
[    0.287251] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287279] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.287525] NET: Registered protocol family 1
[    0.287815] RPC: Registered named UNIX socket transport module.
[    0.287827] RPC: Registered udp transport module.
[    0.287835] RPC: Registered tcp transport module.
[    0.287844] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.287856] PCI: CLS 0 bytes, default 64
[    0.288277] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290252] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.292307] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.292497] msgmni has been set to 967
[    0.293260] io scheduler noop registered
[    0.293273] io scheduler deadline registered
[    0.293310] io scheduler cfq registered (default)
[    0.305737] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.305757] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.429111] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.996939] console [ttyPS0] enabled
[    1.001188] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.008804] [drm] Initialized drm 1.1.0 20060810
[    1.025942] brd: module loaded
[    1.035330] loop: module loaded
[    1.044743] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.050723] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.058489] libphy: XEMACPS mii bus: probed
[    1.062856] ------------- phy_id = 0x3625e62
[    1.067595] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.076169] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.082813] ehci-pci: EHCI PCI platform driver
[    1.090042] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.096832] usbcore: registered new interface driver usb-storage
[    1.103689] mousedev: PS/2 mouse device common for all mice
[    1.109867] i2c /dev entries driver
[    1.116720] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.122248] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.128248] Xilinx Zynq CpuIdle Driver started
[    1.133092] sdhci: Secure Digital Host Controller Interface driver
[    1.139294] sdhci: Copyright(c) Pierre Ossman
[    1.143562] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.150375] mmc0: no vqmmc regulator found
[    1.154389] mmc0: no vmmc regulator found
[    1.196963] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205648] usbcore: registered new interface driver usbhid
[    1.211152] usbhid: USB HID core driver
[    1.215858] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.222158] nand: Micron MT29F2G08ABAEAWP
[    1.226120] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.232057] Bad block table found at page 131008, version 0x01
[    1.238276] Bad block table found at page 130944, version 0x01
[    1.244327] 3 ofpart partitions found on MTD device pl353-nand
[    1.250111] Creating 3 MTD partitions on "pl353-nand":
[    1.255202] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.263249] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270544] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.281286] TCP: cubic registered
[    1.284519] NET: Registered protocol family 17
[    1.289230] Registering SWP/SWPB emulation handler
[    1.295085] regulator-dummy: disabling
[    1.299402] UBI: attaching mtd1 to ubi0
[    1.823827] UBI: scanning is finished
[    1.835430] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.842512] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.849275] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.855940] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.862817] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.868799] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.875906] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1298204553
[    1.884948] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.894164] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.894170] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.898104] ALSA device list:
[    1.898108]   No soundcards found.
[    1.914462] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.943335] UBIFS: recovery needed
[    2.026008] UBIFS: recovery completed
[    2.029687] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.035613] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.044745] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.054631] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.059671] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 18E255BB-788D-4935-A7C9-507B6B7DB812, small LPT model
[    2.070723] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.077897] devtmpfs: mounted
[    2.081004] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.913073] random: dd urandom read with 1 bits of entropy available
[    3.296979] 
[    3.296979] bcm54xx_config_init
[    3.906982] 
[    3.906982] bcm54xx_config_init
[   39.907806] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   39.913898] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   40.065493] In axi fpga driver!
[   40.068593] request_mem_region OK!
[   40.071955] AXI fpga dev virtual address is 0xdf9fe000
[   40.077098] *base_vir_addr = 0xc51e
[   40.091826] In fpga mem driver!
[   40.095057] request_mem_region OK!
[   40.098649] fpga mem virtual address is 0xe2000000
[   40.896966] 
[   40.896966] bcm54xx_config_init
[   41.526958] 
[   41.526958] bcm54xx_config_init
[   64.527812] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   64.533834] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  336.629515] random: nonblocking pool is initialized
log_level = 4
This is XILINX board. Totalram:       507486208
Detect 512MB control board of XILINX
mmap axi_fpga_addr = 0xb6ff7000
axi_fpga_addr data = 0xc51e
mmap fpga_mem_addr = 0xb5df0000
forceFreq=-1 forceFlag=0
min work minertest[0]:912


DETECT HW version=0000c51e
miner ID : 80389d4a5c208814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
read pic freq and badcore num...
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Check chain[5] PIC fw version=0x03
read pic freq and badcore num...
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[16] has core num=5
Check chain[6] PIC fw version=0x03
read pic freq and badcore num...
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[45] has core num=1
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
chain[5] temp offset record: 62,-5,0,0,0,0,33,0
chain[5] temp chip I2C addr=0x98
chain[6] temp offset record: 62,-5,0,0,0,0,33,0
chain[6] temp chip I2C addr=0x98
chain[7] temp offset record: 62,-5,0,0,0,0,33,0
chain[7] temp chip I2C addr=0x98
total_exist_chain_num = 3
single_board_frq_tuning enter
min_rate, des_rate, fix_volt:13800, 14000, 880
force_freq not set, don't need tuning
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found= 1371 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
bmminer not found=12702 root       0:00 grep bmminer

bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Mon Mar 4 11:45:08 CST 2019 type: Antminer S9i
miner ID : 80389d4a5c208814
Checking fans...
get fan[4] speed=4800
get fan[4] speed=4800
get fan[5] speed=4920
get fan[4] speed=4800
get fan[5] speed=4920
get fan[4] speed=4800
get fan[5] speed=4920
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x0f 0x4a 0x0b 0x4a 0x04 0x4a 0x0a 0x4a 0x00 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x03 0x4a 0x01 0x4a 0x01 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x0f 0x4a 0x05 0x4a 0x07 0x4a 0x23 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 0x00 0x4a 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has lpm backup chain_voltage=820
No scan based on domain
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x0f 0x4b 0x0b 0x4b 0x04 0x4b 0x0b 0x4b 0x00 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x01 0x4b 0x01 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x05 0x4b 0x07 0x4b 0x23 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has lpm backup chain_voltage=820
No scan based on domain
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
origin last_freq: 0x00 0x7d 0x0f 0x4b 0x0b 0x4b 0x04 0x4b 0x0b 0x4b 0x00 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x03 0x4b 0x01 0x4b 0x01 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x0f 0x4b 0x05 0x4b 0x07 0x4b 0x23 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 0x00 0x4b 
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has lpm backup chain_voltage=820
No scan based on domain
Check chain[7] PIC fw version=0x03
total_exist_chain_num = 3
Chain[J6] orignal chain_voltage_pic=6 value=940
Chain[J6] will use backup chain_voltage_pic=820 [210]
Chain[J6] get working chain_voltage_pic=210
Chain[J7] orignal chain_voltage_pic=6 value=940
Chain[J7] will use backup chain_voltage_pic=820 [210]
Chain[J7] get working chain_voltage_pic=210
Chain[J8] orignal chain_voltage_pic=6 value=940
Chain[J8] will use backup chain_voltage_pic=820 [210]
Chain[J8] get working chain_voltage_pic=210
Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
retry Chain[J6] has 0 asic
do read_temp_func once...
Done check_asic_reg
Max pcb temp : -100
set FAN speed according to: temp_highest=-100 temp_top1[PWM_T]=-100 temp_top1[TEMP_POS_LOCAL]=-100 temp_change=0 fix_fan_steps=0
FAN PWM: 0
read_temp_func Done!
CRC error counter=0

He is wrong. You do NOT install Braiins OS by booting from SD Card, its never "flashed", you are simply running from the SD card. Next version of Braiins OS will allow actual installing (into the NAND flash of the controller), but this feature is not available yet. If he takes out the card Braiins OS is gone.

To "flash" Braiins OS in the current version, you need a working factory firmware with ssh access (no 2019) and a separate computer to either use the web UI firmware upgrade method or the much safer python script that makes a backup before flashing and can always be reverted back.

When the next Braiins OS version comes out he will have an option in the UI to actually "Flash" it into the NAND controller, then he can take out the sd card, move the jumper back and it will still boot Braiins OS.

If Braiins OS is working then its best to just use it. It doesn't matter if it says S9 or S9i as long as it works.

you are correct , i did not flash the miner with braiins os , im simply booting from sd card . when i get home will put in the hashboards and see if the boards show up.