antminer s9j 14.5ths wont hash

[CryptoBoss101]

hi guys

i am having trouble with my s9j 14.5ths since i got it only 1 hashboard works i have check them 1 by 1 and they work perfectly fine when i try to run all together only 1 board works and it hash only 190.555 and the other 2 are in 0000 what can i do to fix the problem and the psu is apw 3++

Thank you.

[Artemis3]

hi guys

i am having trouble with my s9j 14.5ths since i got it only 1 hashboard works i have check them 1 by 1 and they work perfectly fine when i try to run all together only 1 board works and it hash only 190.555 and the other 2 are in 0000 what can i do to fix the problem and the psu is apw 3++

Thank you.

Did you try swapping cables? If they all work alone with a single board using different boards and data/power cables, then most likely you have a PSU issue. It would be ideal to test with another PSU.

[CryptoBoss101]

i also tested with a psu 1800w all of the still works 1 by 1 and the same problem when i try to start them all together

[BitMaxz]

Can you post your kernel logs here so that we can analyze if what is the issue of your miner when running all hashboard together?

You can find the kernel logs under the system tab and then copy all logs and post it here.

Did you tried to hard reset the miner? If not do this first before you post the kernel logs here and maybe it might solve your issue.

[CryptoBoss101]

i have reset the system multiple times and still the same.

Code:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 0fc00000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: mem=496M console=ttyPS0,115200 root=/dev/ram0 rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 346960K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 160944K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000305] ps7-ttc #0 at df804000, irq=43
[    0.000610] Console: colour dummy device 80x30
[    0.000641] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040205] pid_max: default: 32768 minimum: 301
[    0.040419] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040440] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042586] CPU: Testing write buffer coherency: ok
[    0.042921] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.042981] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043200] L310 cache controller enabled
[    0.043220] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121032] CPU1: Booted secondary processor
[    0.210225] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210357] Brought up 2 CPUs
[    0.210376] SMP: Total of 2 processors activated.
[    0.210385] CPU: All CPU(s) started in SVC mode.
[    0.211033] devtmpfs: initialized
[    0.213359] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214558] regulator-dummy: no parameters
[    0.221801] NET: Registered protocol family 16
[    0.224011] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226286] cpuidle: using governor ladder
[    0.226299] cpuidle: using governor menu
[    0.233604] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235123] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235137] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235249] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.256932] bio: create slab <bio-0> at 0
[    0.258327] vgaarb: loaded
[    0.259044] SCSI subsystem initialized
[    0.259943] usbcore: registered new interface driver usbfs
[    0.260130] usbcore: registered new interface driver hub
[    0.261052] usbcore: registered new device driver usb
[    0.261818] media: Linux media interface: v0.10
[    0.261990] Linux video capture interface: v2.00
[    0.262230] pps_core: LinuxPPS API ver. 1 registered
[    0.262242] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.262367] PTP clock support registered
[    0.262717] EDAC MC: Ver: 3.0.0
[    0.263755] Advanced Linux Sound Architecture Driver Initialized.
[    0.266524] DMA-API: preallocated 4096 debug entries
[    0.266540] DMA-API: debugging enabled by kernel config
[    0.266614] Switched to clocksource arm_global_timer
[    0.286772] NET: Registered protocol family 2
[    0.287433] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287491] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287575] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287620] TCP: reno registered
[    0.287639] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287671] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.287907] NET: Registered protocol family 1
[    0.288255] RPC: Registered named UNIX socket transport module.
[    0.288267] RPC: Registered udp transport module.
[    0.288276] RPC: Registered tcp transport module.
[    0.288284] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288297] PCI: CLS 0 bytes, default 64
[    0.288517] Trying to unpack rootfs image as initramfs...
[    1.401672] Freeing initrd memory: 17388K (d7f04000 - d8fff000)
[    1.401891] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    1.404106] futex hash table entries: 512 (order: 3, 32768 bytes)
[    1.406274] jffs2: version 2.2. (NAND) ?2001-2006 Red Hat, Inc.
[    1.406465] msgmni has been set to 967
[    1.419145] io scheduler noop registered
[    1.419161] io scheduler deadline registered
[    1.419208] io scheduler cfq registered (default)
[    1.430281] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    1.430301] dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    1.554998] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    2.131223] console [ttyPS0] enabled
[    2.135505] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    2.143156] [drm] Initialized drm 1.1.0 20060810
[    2.160193] brd: module loaded
[    2.169641] loop: module loaded
[    2.179143] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    2.184891] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    2.192921] libphy: XEMACPS mii bus: probed
[    2.197321] ------------- phy_id = 0x3625e62
[    2.205055] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    2.213849] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.220532] ehci-pci: EHCI PCI platform driver
[    2.227776] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    2.234593] usbcore: registered new interface driver usb-storage
[    2.241584] mousedev: PS/2 mouse device common for all mice
[    2.247777] i2c /dev entries driver
[    2.254705] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    2.260298] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    2.266182] Xilinx Zynq CpuIdle Driver started
[    2.271070] sdhci: Secure Digital Host Controller Interface driver
[    2.277242] sdhci: Copyright(c) Pierre Ossman
[    2.281508] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.288330] mmc0: no vqmmc regulator found
[    2.292344] mmc0: no vmmc regulator found
[    2.336640] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    2.349524] usbcore: registered new interface driver usbhid
[    2.355027] usbhid: USB HID core driver
[    2.363720] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    2.372042] nand: Micron MT29F2G08ABAEAWP
[    2.378017] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    2.383894] Bad block table found at page 131008, version 0x01
[    2.390157] Bad block table found at page 130944, version 0x01
[    2.396223] 3 ofpart partitions found on MTD device pl353-nand
[    2.402009] Creating 3 MTD partitions on "pl353-nand":
[    2.407134] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    2.415174] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    2.422506] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    2.431477] TCP: cubic registered
[    2.434714] NET: Registered protocol family 17
[    2.439393] Registering SWP/SWPB emulation handler
[    2.445341] regulator-dummy: disabling
[    2.448888] mmc0: new high speed SDHC card at address 1234
[    2.449533] mmcblk0: mmc0:1234 SA04G 3.63 GiB (ro)
[    2.451403]  mmcblk0: p1 p2
[    2.462657] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    2.472832] ALSA device list:
[    2.475723]   No soundcards found.
[    2.480011] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    2.486320] Failed to execute /init (error -13)
[    3.160949] random: dd urandom read with 8 bits of entropy available
[    5.456656] 
[    5.456656] bcm54xx_config_init
[    6.106658] 
[    6.106658] bcm54xx_config_init
[    9.107681] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    9.113775] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   25.704697] In axi fpga driver!
[   25.707824] request_mem_region OK!
[   25.711159] AXI fpga dev virtual address is 0xdf87e000
[   25.716268] *base_vir_addr = 0x8c510
[   25.730704] In fpga mem driver!
[   25.734828] request_mem_region OK!
[   25.738513] fpga mem virtual address is 0xe2000000
[   26.476652] 
[   26.476652] bcm54xx_config_init
[   27.106647] 
[   27.106647] bcm54xx_config_init
[   30.107481] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   30.113498] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[  157.340558] random: nonblocking pool is initialized
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=525 Chain[5] voltage_pic=108 value=880
Fix freq=525 Chain[6] voltage_pic=108 value=880
Fix freq=525 Chain[7] voltage_pic=108 value=880
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=525M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=525M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=525M
Chain[J8] has no core num in PIC

Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:525 
Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525 Asic[ 8]:525 
Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525 Asic[16]:525 
Asic[17]:525 Asic[18]:525 Asic[19]:525 Asic[20]:525 Asic[21]:525 Asic[22]:525 Asic[23]:525 Asic[24]:525 
Asic[25]:525 Asic[26]:525 Asic[27]:525 Asic[28]:525 Asic[29]:525 Asic[30]:525 Asic[31]:525 Asic[32]:525 
Asic[33]:525 Asic[34]:525 Asic[35]:525 Asic[36]:525 Asic[37]:525 Asic[38]:525 Asic[39]:525 Asic[40]:525 
Asic[41]:525 Asic[42]:525 Asic[43]:525 Asic[44]:525 Asic[45]:525 Asic[46]:525 Asic[47]:525 Asic[48]:525 
Asic[49]:525 Asic[50]:525 Asic[51]:525 Asic[52]:525 Asic[53]:525 Asic[54]:525 Asic[55]:525 Asic[56]:525 
Asic[57]:525 Asic[58]:525 Asic[59]:525 Asic[60]:525 Asic[61]:525 Asic[62]:525 
Chain:5 max freq=525
Chain:5 min freq=525

read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:525 
Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525 Asic[ 8]:525 
Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525 Asic[16]:525 
Asic[17]:525 Asic[18]:525 Asic[19]:525 Asic[20]:525 Asic[21]:525 Asic[22]:525 Asic[23]:525 Asic[24]:525 
Asic[25]:525 Asic[26]:525 Asic[27]:525 Asic[28]:525 Asic[29]:525 Asic[30]:525 Asic[31]:525 Asic[32]:525 
Asic[33]:525 Asic[34]:525 Asic[35]:525 Asic[36]:525 Asic[37]:525 Asic[38]:525 Asic[39]:525 Asic[40]:525 
Asic[41]:525 Asic[42]:525 Asic[43]:525 Asic[44]:525 Asic[45]:525 Asic[46]:525 Asic[47]:525 Asic[48]:525 
Asic[49]:525 Asic[50]:525 Asic[51]:525 Asic[52]:525 Asic[53]:525 Asic[54]:525 Asic[55]:525 Asic[56]:525 
Asic[57]:525 Asic[58]:525 Asic[59]:525 Asic[60]:525 Asic[61]:525 Asic[62]:525 
Chain:6 max freq=525
Chain:6 min freq=525

read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:525 
Asic[ 1]:525 Asic[ 2]:525 Asic[ 3]:525 Asic[ 4]:525 Asic[ 5]:525 Asic[ 6]:525 Asic[ 7]:525 Asic[ 8]:525 
Asic[ 9]:525 Asic[10]:525 Asic[11]:525 Asic[12]:525 Asic[13]:525 Asic[14]:525 Asic[15]:525 Asic[16]:525 
Asic[17]:525 Asic[18]:525 Asic[19]:525 Asic[20]:525 Asic[21]:525 Asic[22]:525 Asic[23]:525 Asic[24]:525 
Asic[25]:525 Asic[26]:525 Asic[27]:525 Asic[28]:525 Asic[29]:525 Asic[30]:525 Asic[31]:525 Asic[32]:525 
Asic[33]:525 Asic[34]:525 Asic[35]:525 Asic[36]:525 Asic[37]:525 Asic[38]:525 Asic[39]:525 Asic[40]:525 
Asic[41]:525 Asic[42]:525 Asic[43]:525 Asic[44]:525 Asic[45]:525 Asic[46]:525 Asic[47]:525 Asic[48]:525 
Asic[49]:525 Asic[50]:525 Asic[51]:525 Asic[52]:525 Asic[53]:525 Asic[54]:525 Asic[55]:525 Asic[56]:525 
Asic[57]:525 Asic[58]:525 Asic[59]:525 Asic[60]:525 Asic[61]:525 Asic[62]:525 
Chain:7 max freq=525
Chain:7 min freq=525

max freq = 525
set baud=2
Chain[J6] PIC temp offset=62,0,0,0,0,0,36,28
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=1a
New offset Chain[5] chip[244] local:42 remote:-93 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J6] chip[140] use PIC middle temp offset=28 typeID=00
Warning: Chain[J6] has no temp offset in PIC! will fix it
New offset Chain[5] chip[244] local:40 remote:-97 offset:27 
Chain[J6] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] PIC temp offset=62,0,0,0,0,0,36,28
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=1a
New offset Chain[6] chip[244] local:37 remote:-85 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J7] chip[140] use PIC middle temp offset=28 typeID=00
Warning: Chain[J7] has no temp offset in PIC! will fix it
New offset Chain[6] chip[244] local:36 remote:-88 offset:27 
Chain[J7] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] PIC temp offset=62,0,0,0,0,0,36,28
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=1a
New offset Chain[7] chip[244] local:30 remote:-95 offset:27 
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
Chain[J8] chip[140] use PIC middle temp offset=28 typeID=3f
Warning: Chain[J8] has no temp offset in PIC! will fix it
New offset Chain[7] chip[244] local:29 remote:-95 offset:27 
Chain[J8] chip[244] get middle temp offset=27 typeID=1a
Chain[J6] set working voltage=880 [108]
Chain[J7] set working voltage=880 [108]
Chain[J8] set working voltage=880 [108]
setStartTimePoint total_tv_start_sys=1074 total_tv_end_sys=1075
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08

get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=48.6700 Asic[02]=0.00000 Asic[03]=4.41200 Asic[04]=0.00000 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=369.098 Asic[08]=49.3250 
Asic[09]=0.00000 Asic[10]=0.00000 Asic[11]=0.00000 Asic[12]=0.00000 Asic[13]=0.00000 Asic[14]=13.8070 Asic[15]=0.00000 Asic[16]=0.00000 
Asic[17]=41.0200 Asic[18]=0.00000 Asic[19]=58.7530 Asic[20]=2.86800 Asic[21]=0.00000 Asic[22]=57.7300 Asic[23]=1.66000 Asic[24]=0.00000 
Asic[25]=0.00000 Asic[26]=0.00000 Asic[27]=0.00000 Asic[28]=0.00000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=0.00000 
Asic[33]=0.00000 Asic[34]=0.00000 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=0.00000 Asic[38]=0.00000 Asic[39]=2.04600 Asic[40]=56.6900 
Asic[41]=0.00000 Asic[42]=35.6680 Asic[43]=9.57900 Asic[44]=0.00000 Asic[45]=0.00000 Asic[46]=0.00000 Asic[47]=0.00000 Asic[48]=0.00000 
Asic[49]=48.1170 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=1.49300 Asic[53]=3.28800 Asic[54]=0.00000 Asic[55]=8.20400 Asic[56]=134.217 
Asic[57]=0.00000 Asic[58]=0.00000 Asic[59]=0.00000 
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=0.00000 Asic[02]=0.00000 Asic[03]=0.00000 Asic[04]=587.202 Asic[05]=0.00000 Asic[06]=0.00000 Asic[07]=63.1820 Asic[08]=218.103 
Asic[09]=58.3340 Asic[10]=0.00000 Asic[11]=134.217 Asic[12]=0.00000 Asic[13]=2.86800 Asic[14]=0.00000 Asic[15]=0.00000 Asic[16]=2.86800 
Asic[17]=8.00200 Asic[18]=0.00000 Asic[19]=58.6360 Asic[20]=0.00000 Asic[21]=40.8350 Asic[22]=61.1360 Asic[23]=469.762 Asic[24]=29.4440 
Asic[25]=0.00000 Asic[26]=43.6710 Asic[27]=0.00000 Asic[28]=3.07000 Asic[29]=0.00000 Asic[30]=0.00000 Asic[31]=0.00000 Asic[32]=26.6750 
Asic[33]=0.00000 Asic[34]=1.39200 Asic[35]=0.00000 Asic[36]=0.00000 Asic[37]=587.202 Asic[38]=0.00000 Asic[39]=0.00000 Asic[40]=16.7600 
Asic[41]=3.07000 Asic[42]=0.00000 Asic[43]=0.00000 Asic[44]=314.186 Asic[45]=28.9910 Asic[46]=8.77400 Asic[47]=0.00000 Asic[48]=1.07300 
Asic[49]=0.00000 Asic[50]=0.00000 Asic[51]=0.00000 Asic[52]=0.00000 Asic[53]=0.00000 Asic[54]=1.14000 Asic[55]=41.5730 Asic[56]=620.756 
Asic[57]=23.6720 Asic[58]=117.440 Asic[59]=0.00000 Asic[60]=0.00000 
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Asic[07]=369.098000
Asic[56]=134.217000
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Asic[04]=587.202000
Asic[08]=218.103000
Asic[11]=134.217000
Asic[23]=469.762000
Asic[37]=587.202000
Asic[44]=314.186000
Asic[56]=620.756000
Asic[58]=117.440000
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=1a middle offset=27, device 152
read failed on 0x98, old value: Chain[5] Chip[62] local Temp=0, trying i2c 0x9a
read failed on Chain[5] Chip[62] middle Temp old value:15, 152
218 fix Chain[5] Chip[62] middle Temp = 0
218 fix Chain[5] Chip[62] middle Temp = 0
218 fix Chain[5] Chip[62] middle Temp = 0
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=1a middle offset=27, device 152
read failed on 0x98, old value: Chain[6] Chip[62] local Temp=0, trying i2c 0x9a
read failed on Chain[6] Chip[62] middle Temp old value:15, 152
218 fix Chain[6] Chip[62] middle Temp = 0
218 fix Chain[6] Chip[62] middle Temp = 0
218 fix Chain[6] Chip[62] middle Temp = 0
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=1a middle offset=27, device 152
read failed on 0x98, old value: Chain[7] Chip[62] local Temp=0, trying i2c 0x9a
read failed on Chain[7] Chip[62] middle Temp old value:15, 152
218 fix Chain[7] Chip[62] middle Temp = 0
218 fix Chain[7] Chip[62] middle Temp = 0
218 fix Chain[7] Chip[62] middle Temp = 0
Done read temp on Chain[7]
set FAN speed according to: temp_highest=15 temp_top1[PWM_T]=15 temp_top1[TEMP_POS_LOCAL]=0 temp_change=0 fix_fan_steps=0
MAX_FAN_TEMP is 90, temp_highest is 15, PWM_T is 1, TEMP_POS_LOCAL is 0
FAN PWM: 0
read_temp_func Done!
CRC error counter=13607

[BitMaxz]

Here's the step you need to do first follow the guide listed below and hope that will work.

Follow the resetting guide from here How to reset miner to factory settings
Then ignore the 2nd step after that test it again.

If it's still doesn't work try to flash it with this firmware Antminer-S9-all-201711171757-autofreq-user-Update2UBI-NF.tar.gz then test it again.

If it doesn't work the final solution that I know is this one https://bitcointalk.org/index.php?topic=5032987.0

[CryptoBoss101]

Here's the step you need to do first follow the guide listed below and hope that will work.

Follow the resetting guide from here How to reset miner to factory settings
Then ignore the 2nd step after that test it again.

If it's still doesn't work try to flash it with this firmware Antminer-S9-all-201711171757-autofreq-user-Update2UBI-NF.tar.gz then test it again.

If it doesn't work the final solution that I know is this one https://bitcointalk.org/index.php?topic=5032987.0

thanx i will try this out and is the firmware the same for all antminer s9 or just for the s9 because i have a antminer s9j 14.5ths

[PassThePopcorn]

thanx i will try this out and is the firmware the same for all antminer s9 or just for the s9 because i have a antminer s9j 14.5ths

I believe they have 3 firmware's (more if you count all the older variants of the S9), but S9, S9i and S9j. I think the i and j are identical. Whatever you do, do not install the 2019 version as you will lose ssh capabilities and the ability to roll back your firmware to a previous non 2019 firmware version.

I do have a november 2018 copy of the i firmware if you'd like me to get it put up somewhere for you to download as I think they pulled the older versions from the download page, you might be able to replace the name from BitMaxZ link if that makes you feel more comfortable. I don't think I have any j firmware, I can check and update the post if I can find it: Antminer-S9i-xilinx-201811301418-autofreq-user-Update2UBI-NF.tar.gz.

Edit: I don't seem to have the j firmware.

[Artemis3]

thanx i will try this out and is the firmware the same for all antminer s9 or just for the s9 because i have a antminer s9j 14.5ths

Yeah the linked firmware is meant for all (thats why it has all in its name).

It would also be interesting to see what Braiins OS does in this situation, could you boot it from an SD card?

[PassThePopcorn]

Yeah the linked firmware is meant for all (thats why it has all in its name)...

The all I believe refers to when they had different fixed frequency firmware's.

Because on their site under S9j they have this, and I haven't had good luck with imaging a regular S9 with S9i / j firmware.

Antminer-S9j-all-201807131046-autofreq-user-Update2UBI-NF.tar.gz

https://service.bitmain.com/support/download?product=Antminer%20S9j

*Edit: Correction the all refers to the control board, if you look on that page the one that is missing all is "xilinx".

[CryptoBoss101]

thank you i will try all of this method out to if it helps me

[Artemis3]

I'm sorry i didn't pay attention, the one linked by BitMaxz is wrong, since it belongs the the vanilla S9 and not the S9j.

Then it should be one of these:

	Antminer-S9j-all-201807131046-autofreq-user-Update2UBI-NF.tar.gz	S9j固件 Firmware for Antminer S9j
	Antminer-S9j-all-201811071118-autofreq-user-Update2UBI-NF.tar.gz	Fixed the hashrate dropping issue
	Antminer-S9j-xilinx-201811301411-autofreq-user-Update2UBI-NF.tar.gz	Not support C5 control board

If we believe the kernel log dump, it is the xilinx board... But these firmware descriptions are lacking, to say the least...

Funny how the open source firmware Braiins OS already covers a wider range of S9 units (and some unofficially like the T9) using a single image.

[thierry4wd]

Is simply ! all S9 are same ... i have one S9 13.5Ths , and i installed some firmware, S9 , S9I , S9J , WITHOUT ANY PROBLEM !!! the verssion I or J is only verssion with tried hashboard, not more

[BitMaxz]

I'm sorry i didn't pay attention, the one linked by BitMaxz is wrong...

It's not actually wrong I'm suggesting it to test it with s9 firmware it should be work even it is s9i just like the above said and I already been tested it many times. The important here is to replace the firmware with a new one because the firmware might be corrupted.

You don't need to worry about flashing the firmware incorrectly because there are bunch of method to revert or to flash it back to old firmware.

[CryptoBoss101]

I believe they have 3 firmware's (more if you count all the older variants of the S9), but S9, S9i and S9j. I think the i and j are identical. Whatever you do, do not install the 2019 version as you will lose ssh capabilities and the ability to roll back your firmware to a previous non 2019 firmware version.

I do have a november 2018 copy of the i firmware if you'd like me to get it put up somewhere for you to download as I think they pulled the older versions from the download page, you might be able to replace the name from BitMaxZ link if that makes you feel more comfortable. I don't think I have any j firmware, I can check and update the post if I can find it: Antminer-S9i-xilinx-201811301418-autofreq-user-Update2UBI-NF.tar.gz.

Edit: I don't seem to have the j firmware.

you could zip it in a file for me and send it to me in that way i can download it.

thank you all for the support i will try to fix it when i have some free time.

[tim-bc]

Make sure you are running on a 230 V circuit and not 110 V, otherwise you will not be able to draw enough power.

APW3++ is only rated for 1200W on 110v, and the APW7 only does 1000W at 110v despite being rated for 1800W at 230v.

[BitMaxz]

you could zip it in a file for me and send it to me in that way i can download it.

thank you all for the support i will try to fix it when i have some free time.

Here's the copy in the zip file I currently hosted it to other website.

Here's the link Antminer-S9i-xilinx-201811301418-autofreq-user-Update2UBI-NF.tar.gz.

Sorry I have slow internet to upload so make sure to scan it first using https://www.virustotal.com/.

[CryptoBoss101]

ok guys i have finaly solved the problem it was the apw9++ psu it wasnt giving enough so i got a 1800watt and it works perfectly fine now
Thank you all for the tips