My First Mining Rig

[Cosemose]

Hello fellow miners!
i pretty new to this i have done some research tho!

My specs are
ASrock H110 Pro BTC+
Intel Celeron G3930
Evga Supernova G2 1300W
Msi Geforce GTX 1070
Geforce GTX 970

To my GTX970 i have PCIE Up-Riser and i have a 6pin connected to the riser and its connected to a VGA port in the PSU And the 1070 connected directly to the motherboard. My computer can only connect/recognize one card at the time even if they are both connected

I also have one Molex connected to one of the two PCIE slots on the motherboard i dont now if its all connected at the right way therefor i will upload 2 pictures of my rigg. The molex cable connects to the PSU thru the Prefix slot.

https://imgur.com/a/pwHtXLg

https://imgur.com/a/j0aa0Ji

[PassThePopcorn]

Hello fellow miners!
i pretty new to this i have done some research tho!

My specs are
ASrock H110 Pro BTC+
Intel Celeron G3930
Evga Supernova G2 1300W
Msi Geforce GTX 1070
Geforce GTX 970

To my GTX970 i have PCIE Up-Riser and i have a 6pin connected to the riser and its connected to a VGA port in the PSU And the 1070 connected directly to the motherboard. My computer can only connect/recognize one card at the time even if they are both connected

I also have one Molex connected to one of the two PCIE slots on the motherboard i dont now if its all connected at the right way therefor i will upload 2 pictures of my rigg. The molex cable connects to the PSU thru the Prefix slot.

This should probably go into this area https://bitcointalk.org/index.php?board=160.0
You can use the move button at the bottom left of the screen.

As for the question, I'm not 100% sure but aren't there driver compatibility issues with the 9 v 10 series where you can't run both at the same time?

[Cosemose]

Hello fellow miners!
i pretty new to this i have done some research tho!

My specs are
ASrock H110 Pro BTC+
Intel Celeron G3930
Evga Supernova G2 1300W
Msi Geforce GTX 1070
Geforce GTX 970

To my GTX970 i have PCIE Up-Riser and i have a 6pin connected to the riser and its connected to a VGA port in the PSU And the 1070 connected directly to the motherboard. My computer can only connect/recognize one card at the time even if they are both connected

I also have one Molex connected to one of the two PCIE slots on the motherboard i dont now if its all connected at the right way therefor i will upload 2 pictures of my rigg. The molex cable connects to the PSU thru the Prefix slot.

https://imgur.com/a/pwHtXLg

https://imgur.com/a/j0aa0Ji

This should probably go into this area https://bitcointalk.org/index.php?board=160.0
You can use the move button at the bottom left of the screen.

As for the question, I'm not 100% sure but aren't there driver compatibility issues with the 9 v 10 series where you can't run both at the same time?

Okey im trying to install the 970 thru device manager now.

[0xcosmos]

in bios set the x16 and pcie link speed to gen1 and then try again
it should detect both of your gpus then

[Cosemose]

in bios set the x16 and pcie link speed to gen1 and then try again
it should detect both of your gpus then

Set the X16 in the bios?

[0xcosmos]

in bios set the x16 and pcie link speed to gen1 and then try again
it should detect both of your gpus then

Set the X16 in the bios?

yeah
don't you have this option in your bios?