minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
September 09, 2019, 01:07:12 PM |
|
Most consumers hate "surprises" cart. Though this one is pretty reasonable for US buyers.
|
|
|
|
|
|
|
In order to achieve higher forum ranks, you need both activity points and merit points.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
ailikun
|
|
October 02, 2019, 12:00:20 PM |
|
so is the a1047 the same as the a1041?
Does the a1047 also have low power mode?
|
Komuto Herovato is definitely the chief engineer of bfl)
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3626
Merit: 2520
Evil beware: We have waffles!
|
|
October 02, 2019, 12:06:29 PM Last edit: October 02, 2019, 04:06:44 PM by NotFuzzyWarm |
|
so is the a1047 the same as the a1041?
Does the a1047 also have low power mode?
Mostly the same and yes. Only difference I see on the one I got Monday is that the PSU is attached like the 1041 was *supposed* to use. (all 3 of my 1041's have the loose PSU) Speeds are >31THs in Normal mode and >36THs in High Performance edit: Oh, and the A1047 uses a C19 plug for power - not a C13. It comes with a cord but the wall end is a 'crow foot' style.
|
|
|
|
coffeefan
Copper Member
Newbie
Offline
Activity: 68
Merit: 0
|
|
October 02, 2019, 03:16:12 PM |
|
How fat cables are you guys using to feed it? Seems hard to get powerful C13 for reasonable price (as well the connector itself is rated for 16A max. I think).
|
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3626
Merit: 2520
Evil beware: We have waffles!
|
|
October 02, 2019, 03:18:33 PM Last edit: October 02, 2019, 04:07:25 PM by NotFuzzyWarm |
|
How fat cables are you guys using to feed it? Seems hard to get powerful C13 for reasonable price (as well the connector itself is rated for 16A max. I think).
The A1047 uses a C19 plug - NOT a c13. As noted above, it comes with a cord but the wall end is a 'crow foot' style. I use www.stayonline.com for all my cables
|
|
|
|
wndsnb
|
|
October 03, 2019, 05:39:17 PM Last edit: October 04, 2019, 01:25:17 AM by frodocooper |
|
Yes, these are running 36-37 TH/s @2098 give or take a bit depending on ambient temp...
Has anyone else verified these numbers on the latest batches? 56W/th vs 64W/th in high power mode is a pretty giant difference.
|
Have some dead Bitmain 17 series hashboards or full miners? I'll buy them ... send me a PM with what you have and I'll make you an offer!
|
|
|
NotFuzzyWarm
Legendary
Online
Activity: 3626
Merit: 2520
Evil beware: We have waffles!
|
|
October 03, 2019, 07:43:49 PM Last edit: October 03, 2019, 07:57:47 PM by NotFuzzyWarm Merited by frodocooper (2), wndsnb (1) |
|
<snip> Has anyone else verified these numbers on the latest batches? 56W/th vs 64W/th in high power mode is a pretty giant difference.
Well I just finished a few tests with the A1047 I rcvd on Monday: Date: Oct. 1, 2019 Miner: Canaan Avalon 1047 Rcvd: Sept. 30, 2019 Power source: Triplite 6kva dual-conversion UPS Voltage out: 230V +/- 0.5% Ambient temp: 85F (29.4C) Note: UPS is also powering a M10 pulling 2.17-2.18kw, this baseline load is subtracted from UPS readings to give test miner load. - Miner in Normal mode for 30 min - Power: 2.06kw GUI speed: 31.31THs Efficiency: 65.79W/THs After 24hrs speed/power are the same. Date: Oct. 2, 2019 - Miner in High Performance mode for 1.5hrs - Power: 2.65kw GUI speed: 37.6 THs Efficiency: 70.48W/THs Do note that the miner is running in a fairly warm room and that definitely affects power usage.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
October 04, 2019, 02:06:13 AM Last edit: October 05, 2019, 03:04:45 AM by frodocooper |
|
yeah if you can get them in a 10c or 50f room they get a good efficiency boost.
even 16c or 60f helps
Over 28c or 80f they start pulling more power.
A lot of other companies have the same issue.
|
|
|
|
Katun
Jr. Member
Offline
Activity: 112
Merit: 2
|
|
October 11, 2019, 07:52:04 PM |
|
Where can I purchase a type I to type B adapter for the power supply on this miner (A1047.
|
|
|
|
Philipma1957cellphone
|
|
October 12, 2019, 03:03:28 AM Last edit: October 12, 2019, 03:50:00 AM by frodocooper |
|
Where can I purchase a type I to type B adapter for the power supply on this miner (A1047.
try blokforge.
|
This is philipma1957 alt. Do not conduct business with this account
|
|
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
October 12, 2019, 08:07:59 AM |
|
Where can I purchase a type I to type B adapter for the power supply on this miner (A1047).
Why not just buy a C19 to Type B power cord?
|
|
|
|
Katun
Jr. Member
Offline
Activity: 112
Merit: 2
|
|
October 12, 2019, 02:32:34 PM Last edit: October 14, 2019, 01:24:53 AM by frodocooper |
|
I did not think to replace the provided power cord. This seems like the better route to take. Thank you for the suggestion.
|
|
|
|
digital$
Member
Offline
Activity: 287
Merit: 18
|
|
October 12, 2019, 07:48:51 PM |
|
recently on a order for A1047's was told they didn't have LOA certification required by some(dunno?)countries. out of interest, anyone have any issues ordering state side without that certificate? Im in South Africa just interested if requirements in US are the same and if they have since obtained that certificate(my understanding is they were waiting for it)
|
|
|
|
philipma1957
Legendary
Online
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
October 12, 2019, 09:04:10 PM Last edit: October 14, 2019, 01:25:36 AM by frodocooper |
|
I got got my a1041 from haggsfin and it does not work. It is the Same style unit as tested in this review , but has the loose psu. I seem to have bad psu it is putting out 0 volts to the boards. I will post log {'STATUS':[{'STATUS':'S','When':0,'Code':11,'Msg':'Summary','Description':'cgminer 4.11.1'}],'SUMMARY':[{'Elapsed':179,'MHS av':0.00,} {'MHS 30s':0.00,'MHS 1m':0.00,'MHS 5m':0.00,'MHS 15m':0.00,'Found Blocks':0,'Getworks':5,'Accepted':0,'Rejected':0,'Hardware Errors':0,'Utility':0.00,'Discarded':0,'Stale':0,'Get Failures':0,'Local Work':1,} {'Remote Failures':0,'Network Blocks':1,'Total MH':0.0000,'Work Utility':0.00,'Difficulty Accepted':0.00000000,'Difficulty Rejected':0.00000000,'Difficulty Stale':0.00000000,'Best Share':0,'Device Hardware%':0.0000,'Device Rejected%':0.0000,'Pool Rejected%':0.0000,'Pool Stale%':0.0000,'Last getwork':0}
{'STATUS':[{'STATUS':'S','When':0,'Code':70,'Msg':'CGMiner stats','Description':'cgminer 4.11.1'}], {'STATS':[{'STATS':0,'ID':'AVA100','Elapsed':179,'Calls':0,'Wait':0.000000,'Max':0.000000,'Min':99999999.000000,'MM ID0':'Ver[1041-19092901_cc801a3_3f2e3c6] DNA[020100000cf881b5] NETFAIL[0 0 0 0 0 0 0 0] SYSTEMSTATU[Work: In Work, Hash Board: 0] Elapsed[181] } {MW[0 0] LW[0] MH[0 0] HW[0] DH[0.000%] Temp[32] TMax[32] TAvg[32] Fan1[5652] Fan2[5832] FanR[100%] Vo[2] PS[16 1202 11 9 0 1340] PLL0[0 0 0 0] PLL1[0 0 0 0] GHSmm[0.00] GHSavg[0.00] WU[0.00] Freq[0.00] Led[0] MGHS[0.00 0.00] MTmax[-40 -40] MTavg[0 32] TA[0] ECHU[131073 131073]
ECMM[1] SF0[500 550 575 587] SF1[500 550 575 587] PVT_T0[-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40
-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40
-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40
-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40
-40 -40 -40]
PVT_T1[-40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40 -40]
PVT_V0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] PVT_V1[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0] MW0[0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
I know those 0's are wrong and the psu puts out 0 volts I not sure what is wrong as my connections look good. Dead as a door nail for the moment. Not sure what to reset or clear to get psu to turn on.
|
|
|
|
PassThePopcorn (OP)
|
|
October 13, 2019, 07:27:41 PM Last edit: October 14, 2019, 01:25:57 AM by frodocooper |
|
Is it hooked up properly? I think it's a primary over current for the psu error. Possibly just a bad psu.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
October 13, 2019, 08:12:06 PM Last edit: October 14, 2019, 01:26:18 AM by frodocooper |
|
I have to go up to Clifton I have the two others up there. I think this was dropped in shipping. Hagss sent me pictures of it befor he shipped it and the psu box had no dents. When it arrived the psu box had a dent. My guess is the two pieces were dropped from a six to ten foot height and something in the psu broke.
When hagss shipped the m20s this summer it went missing for two weeks arrived with a dent in the cardboard box which cracked a fan. I repaired that.
|
|
|
|
HagssFIN
Legendary
Offline
Activity: 2436
Merit: 1706
Electrical engineer. Mining since 2014.
|
|
October 13, 2019, 08:57:11 PM Last edit: October 14, 2019, 01:26:39 AM by frodocooper |
|
It seems to be somewhat unsafe if Finnish postal service Posti + the USPS combination is used for the shipping.. :/
|
|
|
|
philipma1957
Legendary
Online
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
October 13, 2019, 10:05:08 PM |
|
When I get to Clifton I will shut down the working Avalon disconnect the power on the psu.
Fire 🔥 up the good gear with just the controller attached to the good psu.
I want to see if the good psu does the same readings when not attached to the hash boards.
Or if it gives out power.
I will then see if the good psu will run the dead 💀 unit.
At hagss it appears that the gear gets handled very hard at the airport.
Since both boxes sent one in July one in Oct had damage.
I asked Steve of Avalon if he has a way to rma the gear.
I sent him an email this morning.
|
|
|
|
minefarmbuy
Full Member
Offline
Activity: 1022
Merit: 221
We are not retail.
|
|
October 14, 2019, 01:30:29 PM |
|
Will be kind if they do considering how the damage occurred. Seems likely that heavy boxes were stored high in a parcel truck.
|
|
|
|
philipma1957
Legendary
Online
Activity: 4116
Merit: 7824
'The right to privacy matters'
|
|
October 16, 2019, 12:55:55 PM Last edit: October 16, 2019, 11:24:23 PM by frodocooper |
|
I think they toss the gear around offloading the plane.
Steve replied to an email and said he would forward this to the rma department.
Maybe I will get a replacement unit. I will post back on it.
Planning to bring unit to Clifton hopefully on thurs will test to see exactly what broke. Psu or hash boards or both. Once I determine what is broken I will follow up here and with avalon to see what replacement parts are needed. Best case is psu is dead hashboard are good. Second best is psu works hashboards are dead. Worst case is both psu and hashboard is dead. fans work controller works
|
|
|
|
|