My miner stopped mining - Innosilicon T2THf

[lnsomnia]

Hi,

As the subject says my Innosilicon stopped mining. I boot the miner it does the usual checks and after ~8-10 the fans should slow down a bit and start mining but it doesn't.

Already tried reconfigure the pools, do a reset to the configs without any success. Any ideas?

Thanks.

[1715391439]

1715391439

[1715391439]

1715391439

[1715391439]

1715391439

[ashkan0192]

hi
tell about the LED lights on the hashboard.
go to your config page and look for error.

[mikeywith]

Unless someone has a crystal ball, nobody will be able to actually help you with the small amount of details of you have included, you should attach screenshots of the miner status page. You can use websites like imgur.com or imgbb.com to upload images, also you need to post the miner's logs, which I think for Innosilicon would be the miner IP address+/logs, so for an example your Innosilicon T2T has this IP address

Code:

192.168.1.50

The logs will be in this url

Code:

192.168.1.50/logs

You should also use the code function on forum to post any logs/errors to make it easy to read.

[BitMaxz]

Try to flash it to the latest firmware and maybe it might solve your issue.

You can find the firmware from here https://www.innosilicon.com/html/support_en/download.html
Make sure to download the exact unit model.

If still doesn't work find the logs from WebGUI then paste it here.(follow the mikeywith post on how to find the logs)