Bitcoin Forum
May 21, 2024, 11:30:10 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: T9+ says "Chain[J4] has 0 asic"  (Read 201 times)
rotem8866 (OP)
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
October 20, 2019, 11:25:10 AM
Last edit: October 20, 2019, 11:43:07 AM by rotem8866
 #1

Hi friends
One of the hashboard dosent work.
I tried:
Replace with other chain
Factory reset
flash with micro sd
Use other chain
Use other data cable
Use other psu
Even tried flash HEX with pickit from other working hashboard

I also tried to clean the hashboard.
any other thing i can try ?
Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-g16220c3 (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #83 SMP PREEMPT Thu Jul 12 11:42:53 CST 2018
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c074ac00, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364316K/507904K available (5057K kernel code, 284K rwdata, 1928K rodata, 204K init, 258K bss, 143588K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06da8ac   (6987 kB)
[    0.000000]       .init : 0xc06db000 - 0xc070e380   ( 205 kB)
[    0.000000]       .data : 0xc0710000 - 0xc0757138   ( 285 kB)
[    0.000000]        .bss : 0xc0757144 - 0xc0797bfc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000]     RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000295] ps7-ttc #0 at df804000, irq=43
[    0.000598] Console: colour dummy device 80x30
[    0.000626] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[    0.090243] pid_max: default: 32768 minimum: 301
[    0.090446] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.090466] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.092623] CPU: Testing write buffer coherency: ok
[    0.092932] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.092988] Setting up static identity map for 0x4cb118 - 0x4cb170
[    0.093208] L310 cache controller enabled
[    0.093227] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.170986] CPU1: Booted secondary processor
[    0.260220] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.260348] Brought up 2 CPUs
[    0.260367] SMP: Total of 2 processors activated.
[    0.260375] CPU: All CPU(s) started in SVC mode.
[    0.261033] devtmpfs: initialized
[    0.263466] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.264652] regulator-dummy: no parameters
[    0.271511] NET: Registered protocol family 16
[    0.273778] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.276040] cpuidle: using governor ladder
[    0.276052] cpuidle: using governor menu
[    0.283406] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.284921] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.284934] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.285043] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.306481] bio: create slab <bio-0> at 0
[    0.307853] vgaarb: loaded
[    0.308558] SCSI subsystem initialized
[    0.309424] usbcore: registered new interface driver usbfs
[    0.309610] usbcore: registered new interface driver hub
[    0.309828] usbcore: registered new device driver usb
[    0.310680] media: Linux media interface: v0.10
[    0.310840] Linux video capture interface: v2.00
[    0.311813] pps_core: LinuxPPS API ver. 1 registered
[    0.311827] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.311965] PTP clock support registered
[    0.312323] EDAC MC: Ver: 3.0.0
[    0.313534] Advanced Linux Sound Architecture Driver Initialized.
[    0.316236] DMA-API: preallocated 4096 debug entries
[    0.316249] DMA-API: debugging enabled by kernel config
[    0.316319] Switched to clocksource arm_global_timer
[    0.336147] NET: Registered protocol family 2
[    0.337153] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.337211] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.337296] TCP: Hash tables configured (established 4096 bind 4096)
[    0.337343] TCP: reno registered
[    0.337360] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.337391] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.337645] NET: Registered protocol family 1
[    0.337989] RPC: Registered named UNIX socket transport module.
[    0.338001] RPC: Registered udp transport module.
[    0.338010] RPC: Registered tcp transport module.
[    0.338018] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.338030] PCI: CLS 0 bytes, default 64
[    0.338451] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.340439] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.342484] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.342668] msgmni has been set to 967
[    0.343427] io scheduler noop registered
[    0.343440] io scheduler deadline registered
[    0.343482] io scheduler cfq registered (default)
[    0.356088] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.356108] dma-pl330 f8003000.ps7-dma:     DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.478347] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    1.045133] console [ttyPS0] enabled
[    1.049396] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.057023] [drm] Initialized drm 1.1.0 20060810
[    1.073923] brd: module loaded
[    1.083303] loop: module loaded
[    1.092684] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.098510] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.106216] libphy: XEMACPS mii bus: probed
[    1.110613] ------------- phy_id = 0x3625e62
[    1.115319] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.124119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.130767] ehci-pci: EHCI PCI platform driver
[    1.138167] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.144970] usbcore: registered new interface driver usb-storage
[    1.151887] mousedev: PS/2 mouse device common for all mice
[    1.157999] i2c /dev entries driver
[    1.164865] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.170404] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.176273] Xilinx Zynq CpuIdle Driver started
[    1.181173] sdhci: Secure Digital Host Controller Interface driver
[    1.187290] sdhci: Copyright(c) Pierre Ossman
[    1.191608] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.198477] mmc0: no vqmmc regulator found
[    1.202487] mmc0: no vmmc regulator found
[    1.246357] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.255036] usbcore: registered new interface driver usbhid
[    1.260556] usbhid: USB HID core driver
[    1.265253] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.271545] nand: Micron MT29F2G08ABAEAWP
[    1.275521] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.281459] Bad block table found at page 131008, version 0x01
[    1.287687] Bad block table found at page 130944, version 0x01
[    1.293737] 3 ofpart partitions found on MTD device pl353-nand
[    1.299506] Creating 3 MTD partitions on "pl353-nand":
[    1.304610] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.312646] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.319951] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.330652] TCP: cubic registered
[    1.333885] NET: Registered protocol family 17
[    1.338612] Registering SWP/SWPB emulation handler
[    1.344483] regulator-dummy: disabling
[    1.348795] UBI: attaching mtd1 to ubi0
[    1.875758] UBI: scanning is finished
[    1.887403] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.894456] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.901252] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.907928] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.914766] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.920777] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.927887] UBI: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1151692613
[    1.936917] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.946115] UBI: background thread "ubi_bgt0d" started, PID 1084
[    1.946120] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.950050] ALSA device list:
[    1.950054]   No soundcards found.
[    1.966420] UBIFS: background thread "ubifs_bgt0_0" started, PID 1086
[    1.995369] UBIFS: recovery needed
[    2.077952] UBIFS: recovery completed
[    2.081616] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    2.087561] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    2.096675] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    2.106559] UBIFS: reserved for root: 0 bytes (0 KiB)
[    2.111588] UBIFS: media format: w4/r0 (latest is w4/r0), UUID 7CB6B46E-224A-4550-9A92-F6ED1D649181, small LPT model
[    2.123109] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    2.130311] devtmpfs: mounted
[    2.133415] Freeing unused kernel memory: 204K (c06db000 - c070e000)
[    2.969404] random: dd urandom read with 1 bits of entropy available
[    3.356345]
[    3.356345] bcm54xx_config_init
[    4.416382]
[    4.416382] bcm54xx_config_init
[    7.417198] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.423293] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   19.989330] In axi fpga driver!
[   19.992422] request_mem_region OK!
[   19.995793] AXI fpga dev virtual address is 0xdf9fe000
[   20.000926] *base_vir_addr = 0xc725
[   20.015543] In fpga mem driver!
[   20.019128] request_mem_region OK!
[   20.022636] fpga mem virtual address is 0xe2000000
[   20.806368]
[   20.806368] bcm54xx_config_init
[   21.886338]
[   21.886338] bcm54xx_config_init
[   24.887207] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   24.893229] xemacps e000b000.ps7-ethernet: link up (100/FULL)
main.c:13992: log_level = 4
main.c:14019: This is XILINX board. Totalram:       507486208
main.c:14031: Detect 512MB control board of XILINX
driver-bitmain.c:1776: mmap axi_fpga_addr = 0xb6f74000
driver-bitmain.c:1781: axi_fpga_addr data = 0xc725
driver-bitmain.c:1797: mmap fpga_mem_addr = 0xb5d6d000
driver-bitmain.c:994: forceFreq=-1 forceFlag=0
driver-bitmain.c:1696: min work minertest[0]:912


main.c:8570: DETECT HW version=8000c725
main.c:14064: miner ID : 81609d026880881c
main.c:14097: Miner Type = T9+
main.c:14101: AsicType = 1387
main.c:14104: real AsicNum = 18
main.c:14197: use critical mode to search freq...
driver-bitmain.c:1876: get PLUG ON=0x07003f0e
driver-bitmain.c:1907: Find hashboard on Chain[1]
driver-bitmain.c:1907: Find hashboard on Chain[2]
driver-bitmain.c:1907: Find hashboard on Chain[3]
driver-bitmain.c:1907: Find hashboard on Chain[8]
driver-bitmain.c:1907: Find hashboard on Chain[9]
driver-bitmain.c:1907: Find hashboard on Chain[10]
driver-bitmain.c:1907: Find hashboard on Chain[11]
driver-bitmain.c:1907: Find hashboard on Chain[12]
driver-bitmain.c:1907: Find hashboard on Chain[13]
main.c:2126: chain[1] PIC jump to app
main.c:2134: Check chain[1] PIC fw version=0x90
main.c:2126: chain[2] PIC jump to app
main.c:2134: Check chain[2] PIC fw version=0x90
main.c:2126: chain[3] PIC jump to app
main.c:2134: Check chain[3] PIC fw version=0x90
main.c:8651: Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x22 0x11 0x10 0x10 0x21 0x00 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x10 0x01 0x10 0x12 0x01 0x21 0x00 0x11 0x12 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x10 0x21 0x11 0x11 0x01 0x12 0x10 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
main.c:8665: chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[1] has freq in PIC and will jump over...
main.c:9026: Chain[1] has core num in PIC
main.c:9036: Chain[1] ASIC[1] has core num=1
main.c:9036: Chain[1] ASIC[2] has core num=2
main.c:9036: Chain[1] ASIC[3] has core num=2
main.c:9036: Chain[1] ASIC[4] has core num=1
main.c:9036: Chain[1] ASIC[5] has core num=1
main.c:9036: Chain[1] ASIC[6] has core num=1
main.c:9036: Chain[1] ASIC[8] has core num=1
main.c:9036: Chain[1] ASIC[10] has core num=2
main.c:9036: Chain[1] ASIC[11] has core num=1
main.c:9036: Chain[1] ASIC[14] has core num=1
main.c:9036: Chain[1] ASIC[16] has core num=1
main.c:9036: Chain[1] ASIC[17] has core num=1
main.c:8651: Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x21 0x11 0x11 0x11 0x11 0x01 0x11 0x01 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x21 0x11 0x10 0x00 0x10 0x02 0x11 0x10 0x10 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x10 0x10 0x00 0x11 0x10 0x11 0x01 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
main.c:8665: chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[2] has freq in PIC and will jump over...
main.c:9026: Chain[2] has core num in PIC
main.c:9036: Chain[2] ASIC[0] has core num=2
main.c:9036: Chain[2] ASIC[1] has core num=1
main.c:9036: Chain[2] ASIC[2] has core num=1
main.c:9036: Chain[2] ASIC[3] has core num=1
main.c:9036: Chain[2] ASIC[4] has core num=1
main.c:9036: Chain[2] ASIC[5] has core num=1
main.c:9036: Chain[2] ASIC[6] has core num=1
main.c:9036: Chain[2] ASIC[7] has core num=1
main.c:9036: Chain[2] ASIC[8] has core num=1
main.c:9036: Chain[2] ASIC[9] has core num=1
main.c:9036: Chain[2] ASIC[11] has core num=1
main.c:9036: Chain[2] ASIC[12] has core num=1
main.c:9036: Chain[2] ASIC[13] has core num=1
main.c:9036: Chain[2] ASIC[15] has core num=1
main.c:8651: Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x12 0x01 0x12 0x01 0x01 0x02 0x11 0x01 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x12 0x11 0x21 0x12 0x10 0x00 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x21 0x10 0x02 0x01 0x11 0x11 0x01 0x01 0x20 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
main.c:8665: chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[3] has freq in PIC and will jump over...
main.c:9026: Chain[3] has core num in PIC
main.c:9036: Chain[3] ASIC[0] has core num=1
main.c:9036: Chain[3] ASIC[1] has core num=2
main.c:9036: Chain[3] ASIC[3] has core num=1
main.c:9036: Chain[3] ASIC[4] has core num=1
main.c:9036: Chain[3] ASIC[5] has core num=2
main.c:9036: Chain[3] ASIC[7] has core num=1
main.c:9036: Chain[3] ASIC[9] has core num=1
main.c:9036: Chain[3] ASIC[11] has core num=2
main.c:9036: Chain[3] ASIC[12] has core num=1
main.c:9036: Chain[3] ASIC[13] has core num=1
main.c:9036: Chain[3] ASIC[15] has core num=1
main.c:9036: Chain[3] ASIC[16] has core num=1
main.c:9036: Chain[3] ASIC[17] has core num=1
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[8] has freq in PIC and will jump over...
main.c:9026: Chain[8] has core num in PIC
main.c:9036: Chain[8] ASIC[0] has core num=1
main.c:9036: Chain[8] ASIC[3] has core num=1
main.c:9036: Chain[8] ASIC[4] has core num=1
main.c:9036: Chain[8] ASIC[6] has core num=1
main.c:9036: Chain[8] ASIC[7] has core num=2
main.c:9036: Chain[8] ASIC[9] has core num=1
main.c:9036: Chain[8] ASIC[10] has core num=2
main.c:9036: Chain[8] ASIC[11] has core num=1
main.c:9036: Chain[8] ASIC[14] has core num=1
main.c:9036: Chain[8] ASIC[15] has core num=1
main.c:9036: Chain[8] ASIC[16] has core num=1
main.c:9036: Chain[8] ASIC[17] has core num=2
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[9] has freq in PIC and will jump over...
main.c:9026: Chain[9] has core num in PIC
main.c:9036: Chain[9] ASIC[1] has core num=1
main.c:9036: Chain[9] ASIC[2] has core num=1
main.c:9036: Chain[9] ASIC[4] has core num=2
main.c:9036: Chain[9] ASIC[5] has core num=1
main.c:9036: Chain[9] ASIC[6] has core num=1
main.c:9036: Chain[9] ASIC[7] has core num=1
main.c:9036: Chain[9] ASIC[8] has core num=1
main.c:9036: Chain[9] ASIC[9] has core num=1
main.c:9036: Chain[9] ASIC[11] has core num=1
main.c:9036: Chain[9] ASIC[12] has core num=1
main.c:9036: Chain[9] ASIC[13] has core num=2
main.c:9036: Chain[9] ASIC[14] has core num=1
main.c:9036: Chain[9] ASIC[16] has core num=1
main.c:9036: Chain[9] ASIC[17] has core num=1
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[10] has freq in PIC and will jump over...
main.c:9026: Chain[10] has core num in PIC
main.c:9036: Chain[10] ASIC[0] has core num=2
main.c:9036: Chain[10] ASIC[1] has core num=1
main.c:9036: Chain[10] ASIC[2] has core num=1
main.c:9036: Chain[10] ASIC[3] has core num=1
main.c:9036: Chain[10] ASIC[4] has core num=1
main.c:9036: Chain[10] ASIC[8] has core num=1
main.c:9036: Chain[10] ASIC[11] has core num=2
main.c:9036: Chain[10] ASIC[12] has core num=1
main.c:9036: Chain[10] ASIC[13] has core num=1
main.c:9036: Chain[10] ASIC[14] has core num=1
main.c:9036: Chain[10] ASIC[16] has core num=1
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[11] has freq in PIC and will jump over...
main.c:9026: Chain[11] has core num in PIC
main.c:9036: Chain[11] ASIC[0] has core num=1
main.c:9036: Chain[11] ASIC[1] has core num=1
main.c:9036: Chain[11] ASIC[2] has core num=1
main.c:9036: Chain[11] ASIC[4] has core num=1
main.c:9036: Chain[11] ASIC[8] has core num=1
main.c:9036: Chain[11] ASIC[9] has core num=1
main.c:9036: Chain[11] ASIC[10] has core num=1
main.c:9036: Chain[11] ASIC[12] has core num=1
main.c:9036: Chain[11] ASIC[13] has core num=1
main.c:9036: Chain[11] ASIC[15] has core num=1
main.c:9036: Chain[11] ASIC[17] has core num=1
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[12] has freq in PIC and will jump over...
main.c:9026: Chain[12] has core num in PIC
main.c:9036: Chain[12] ASIC[0] has core num=1
main.c:9036: Chain[12] ASIC[1] has core num=2
main.c:9036: Chain[12] ASIC[2] has core num=1
main.c:9036: Chain[12] ASIC[3] has core num=1
main.c:9036: Chain[12] ASIC[4] has core num=2
main.c:9036: Chain[12] ASIC[5] has core num=1
main.c:9036: Chain[12] ASIC[6] has core num=1
main.c:9036: Chain[12] ASIC[7] has core num=2
main.c:9036: Chain[12] ASIC[8] has core num=1
main.c:9036: Chain[12] ASIC[12] has core num=1
main.c:9036: Chain[12] ASIC[13] has core num=1
main.c:9036: Chain[12] ASIC[14] has core num=1
main.c:9036: Chain[12] ASIC[15] has core num=1
main.c:9036: Chain[12] ASIC[16] has core num=1
main.c:9036: Chain[12] ASIC[17] has core num=1
main.c:9003: has freq in PIC, will disable freq setting.
main.c:9022: chain[13] has freq in PIC and will jump over...
main.c:9026: Chain[13] has core num in PIC
main.c:9036: Chain[13] ASIC[0] has core num=2
main.c:9036: Chain[13] ASIC[1] has core num=1
main.c:9036: Chain[13] ASIC[2] has core num=1
main.c:9036: Chain[13] ASIC[5] has core num=2
main.c:9036: Chain[13] ASIC[7] has core num=1
main.c:9036: Chain[13] ASIC[8] has core num=1
main.c:9036: Chain[13] ASIC[9] has core num=1
main.c:9036: Chain[13] ASIC[10] has core num=1
main.c:9036: Chain[13] ASIC[11] has core num=1
main.c:9036: Chain[13] ASIC[13] has core num=1
main.c:9036: Chain[13] ASIC[15] has core num=1
main.c:9036: Chain[13] ASIC[16] has core num=2
main.c:9183: get PIC voltage=7 on chain[1], value=890
main.c:9183: get PIC voltage=7 on chain[2], value=890
main.c:9183: get PIC voltage=7 on chain[3], value=890
main.c:9183: get PIC voltage=7 on chain[8], value=890
main.c:9183: get PIC voltage=7 on chain[9], value=890
main.c:9183: get PIC voltage=7 on chain[10], value=890
main.c:9183: get PIC voltage=7 on chain[11], value=890
main.c:9183: get PIC voltage=7 on chain[12], value=890
main.c:9183: get PIC voltage=7 on chain[13], value=890
main.c:9349: chain[8] temp offset record: 1,0,0,0,0,0,40,28
main.c:9366: chain[8] temp chip I2C addr=0x98
main.c:9349: chain[10] temp offset record: 1,0,0,0,0,0,35,28
main.c:9366: chain[10] temp chip I2C addr=0x98
main.c:9372: chain[10] has no middle temp, use special fix mode.
main.c:9349: chain[12] temp offset record: 1,0,0,0,0,0,35,28
main.c:9366: chain[12] temp chip I2C addr=0x98
main.c:9372: chain[12] has no middle temp, use special fix mode.
main.c:13956: total_exist_chain_num = 9
main.c:9562: CRC error counter=0
main.c:9577: set command mode to VIL
main.c:9649:
--- check asic number
main.c:9745: After Get ASIC NUM CRC error counter=0
main.c:9768: set_baud=0
main.c:10693: The min freq=700
main.c:10695: set real timeout 52, need sleep=379392
main.c:12825: After TEST CRC error counter=0
main.c:14236: search freq for 1 times, completed chain = 9, total chain num = 9
main.c:14645: restart Miner chance num=2
main.c:14685: waiting for receive_func to exit!
main.c:14699: waiting for pic heart to exit!
main.c:13927: bmminer not found= 2104 root       0:00 grep bmminer

main.c:14758: bmminer not found, restart bmminer ...
driver-btm-c5.c:12243:bitmain_c5_init: This is user mode for mining
driver-btm-c5.c:12292:bitmain_c5_init: Detect 512MB control board of XILINX
driver-btm-c5.c:12321:bitmain_c5_init: Miner Type = T9+
driver-btm-c5.c:12324:bitmain_c5_init: Miner compile time: Wed Jul 31 16:20:36 CST 2019 type: Antminer T9+
driver-btm-c5.c:12414:bitmain_c5_init: miner ID : 81609d026880881c
driver-btm-c5.c:12571:bitmain_c5_init: Checking fans...
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[4] speed=5880
driver-btm-c5.c:3006:check_fan_beforeInit: get fan[5] speed=6120
driver-btm-c5.c:1680:jump_to_app_CheckAndRestorePIC_T9_18: chain[1] PIC jump to app
driver-btm-c5.c:1685:jump_to_app_CheckAndRestorePIC_T9_18: Check chain[1] PIC fw version=0x90
driver-btm-c5.c:12624:bitmain_c5_init: Chain[1] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x22 0x11 0x10 0x10 0x21 0x00 0x10 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x10 0x01 0x10 0x12 0x01 0x21 0x00 0x11 0x12 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x01 0x10 0x21 0x11 0x11 0x01 0x12 0x10 0x11 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
driver-btm-c5.c:12639:bitmain_c5_init: chain[1]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:12784:bitmain_c5_init: Chain[J2] has backup chain_voltage=870
driver-btm-c5.c:12794:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12800:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12808:bitmain_c5_init: Chain[J2] test patten OK temp=-1
driver-btm-c5.c:1680:jump_to_app_CheckAndRestorePIC_T9_18: chain[2] PIC jump to app
driver-btm-c5.c:1685:jump_to_app_CheckAndRestorePIC_T9_18: Check chain[2] PIC fw version=0x90
driver-btm-c5.c:12624:bitmain_c5_init: Chain[2] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x21 0x11 0x11 0x11 0x11 0x01 0x11 0x01 0x00 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x21 0x11 0x10 0x00 0x10 0x02 0x11 0x10 0x10 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x11 0x10 0x10 0x00 0x11 0x10 0x11 0x01 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
driver-btm-c5.c:12639:bitmain_c5_init: chain[2]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:12784:bitmain_c5_init: Chain[J3] has backup chain_voltage=870
driver-btm-c5.c:12794:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12800:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12808:bitmain_c5_init: Chain[J3] test patten OK temp=-1
driver-btm-c5.c:1680:jump_to_app_CheckAndRestorePIC_T9_18: chain[3] PIC jump to app
driver-btm-c5.c:1685:jump_to_app_CheckAndRestorePIC_T9_18: Check chain[3] PIC fw version=0x90
driver-btm-c5.c:12624:bitmain_c5_init: Chain[3] read_freq_badcores : 0x7d 0x33 0x33 0x33 0x11 0x33 0x33 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x12 0x01 0x12 0x01 0x01 0x02 0x11 0x01 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x12 0x11 0x21 0x12 0x10 0x00 0x11 0x11 0x11 0x3e 0x57 0x00 0xff 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x3e 0x21 0x10 0x02 0x01 0x11 0x11 0x01 0x01 0x20 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff
driver-btm-c5.c:12639:bitmain_c5_init: chain[3]: [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255] [255:255]
driver-btm-c5.c:12784:bitmain_c5_init: Chain[J4] has backup chain_voltage=870
driver-btm-c5.c:12794:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12800:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12808:bitmain_c5_init: Chain[J4] test patten OK temp=-1
driver-btm-c5.c:12784:bitmain_c5_init: Chain[J9] has backup chain_voltage=870
driver-btm-c5.c:12794:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12800:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12808:bitmain_c5_init: Chain[J9] test patten OK temp=-1
driver-btm-c5.c:12784:bitmain_c5_init: Chain[J10] has backup chain_voltage=870
driver-btm-c5.c:12794:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12800:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12808:bitmain_c5_init: Chain[J10] test patten OK temp=-1
driver-btm-c5.c:12784:bitmain_c5_init: Chain[J11] has backup chain_voltage=870
driver-btm-c5.c:12794:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12800:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12808:bitmain_c5_init: Chain[J11] test patten OK temp=-1
driver-btm-c5.c:12784:bitmain_c5_init: Chain[J12] has backup chain_voltage=870
driver-btm-c5.c:12794:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12800:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12808:bitmain_c5_init: Chain[J12] test patten OK temp=-1
driver-btm-c5.c:12784:bitmain_c5_init: Chain[J13] has backup chain_voltage=870
driver-btm-c5.c:12794:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12800:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12808:bitmain_c5_init: Chain[J13] test patten OK temp=-1
driver-btm-c5.c:12784:bitmain_c5_init: Chain[J14] has backup chain_voltage=870
driver-btm-c5.c:12794:bitmain_c5_init: Detect: use voltage limit rules on single board!
driver-btm-c5.c:12800:bitmain_c5_init: Detect: T9+ use voltage level=1
driver-btm-c5.c:12808:bitmain_c5_init: Chain[J14] test patten OK temp=-1
driver-btm-c5.c:12195:init_exist_chain_table: total_exist_chain_num = 9
driver-btm-c5.c:13239:bitmain_c5_init: Chain[J2] will use voltage=890 [7] to open core
driver-btm-c5.c:2168:set_Voltage_S9_plus_plus_BM1387_54: set voltage 7 seccessful
driver-btm-c5.c:13239:bitmain_c5_init: Chain[J3] will use voltage=890 [7] to open core
driver-btm-c5.c:2168:set_Voltage_S9_plus_plus_BM1387_54: set voltage 7 seccessful
driver-btm-c5.c:13239:bitmain_c5_init: Chain[J4] will use voltage=890 [7] to open core
driver-btm-c5.c:2168:set_Voltage_S9_plus_plus_BM1387_54: set voltage 7 seccessful
driver-btm-c5.c:13239:bitmain_c5_init: Chain[J9] will use voltage=890 [7] to open core
driver-btm-c5.c:13239:bitmain_c5_init: Chain[J10] will use voltage=890 [7] to open core
driver-btm-c5.c:13239:bitmain_c5_init: Chain[J11] will use voltage=890 [7] to open core
driver-btm-c5.c:13239:bitmain_c5_init: Chain[J12] will use voltage=890 [7] to open core
driver-btm-c5.c:13239:bitmain_c5_init: Chain[J13] will use voltage=890 [7] to open core
driver-btm-c5.c:13239:bitmain_c5_init: Chain[J14] will use voltage=890 [7] to open core
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J2] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J2] will use backup chain_voltage_pic=870 [11]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J2] get working chain_voltage_pic=11
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J3] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J3] will use backup chain_voltage_pic=870 [11]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J3] get working chain_voltage_pic=11
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J4] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J4] will use backup chain_voltage_pic=870 [11]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J4] get working chain_voltage_pic=11
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J9] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J9] will use backup chain_voltage_pic=870 [11]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J9] get working chain_voltage_pic=11
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J10] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J10] will use backup chain_voltage_pic=870 [11]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J10] get working chain_voltage_pic=11
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J11] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J11] will use backup chain_voltage_pic=870 [11]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J11] get working chain_voltage_pic=11
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J12] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J12] will use backup chain_voltage_pic=870 [11]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J12] get working chain_voltage_pic=11
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J13] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J13] will use backup chain_voltage_pic=870 [11]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J13] get working chain_voltage_pic=11
driver-btm-c5.c:13303:bitmain_c5_init: Chain[J14] orignal chain_voltage_pic=7 value=890
driver-btm-c5.c:13320:bitmain_c5_init: Chain[J14] will use backup chain_voltage_pic=870 [11]
driver-btm-c5.c:13330:bitmain_c5_init: Chain[J14] get working chain_voltage_pic=11
driver-btm-c5.c:11821:T9_18_getASICnum: T9+ try get asic num for the 1 time
driver-btm-c5.c:11832:T9_18_getASICnum: Chain[J2] has 18 asic
driver-btm-c5.c:11832:T9_18_getASICnum: Chain[J3] has 18 asic
driver-btm-c5.c:11832:T9_18_getASICnum: Chain[J4] has 0 asic
driver-btm-c5.c:11821:T9_18_getASICnum: T9+ try get asic num for the 2 time
driver-btm-c5.c:11832:T9_18_getASICnum: Chain[J2] has 18 asic
driver-btm-c5.c:11832:T9_18_getASICnum: Chain[J3] has 18 asic
driver-btm-c5.c:11832:T9_18_getASICnum: Chain[J4] has 0 asic

DaveF
Legendary
*
Offline Offline

Activity: 3486
Merit: 6303


Crypto Swap Exchange


View Profile WWW
October 20, 2019, 12:46:13 PM
Last edit: October 21, 2019, 01:11:33 AM by frodocooper
 #2

Since you already did the standard diagnostics (cable / PS / reset)
And you also reprogrammed, I am going to have to say the next step is going to be checking the voltages at the regulators.
Also, if you want to pull off the heat-sinks you can check for damage.

Depending on where you are located, the cost of power, and a bunch of other things it's probably not worth buying a replacement board.
But that's just my opinion.

-Dave

█▀▀▀











█▄▄▄
▀▀▀▀▀▀▀▀▀▀▀
e
▄▄▄▄▄▄▄▄▄▄▄
█████████████
████████████▄███
██▐███████▄█████▀
█████████▄████▀
███▐████▄███▀
████▐██████▀
█████▀█████
███████████▄
████████████▄
██▄█████▀█████▄
▄█████████▀█████▀
███████████▀██▀
████▀█████████
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
c.h.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀▀█











▄▄▄█
▄██████▄▄▄
█████████████▄▄
███████████████
███████████████
███████████████
███████████████
███░░█████████
███▌▐█████████
█████████████
███████████▀
██████████▀
████████▀
▀██▀▀
BitMaxz
Legendary
*
Offline Offline

Activity: 3262
Merit: 2974


Block halving is coming.


View Profile WWW
October 20, 2019, 06:52:45 PM
 #3

Add this from DaveF post.
First, if you have multi tester check the terminal of the hashboard(The 0 ASIC one) if it shorted or not.
Check the hashboard carefully if there are burnt parts if you found one you need to replace it.
Also, check some missing parts just use and check the working hashboard as reference.
Last thing is to check the capacitor if it is bloated you need to replace it with the same value.

If you don't want to repair the hashboard on your own hire, someone, to do that or replace it with a new one.

█▀▀▀











█▄▄▄
▀▀▀▀▀▀▀▀▀▀▀
e
▄▄▄▄▄▄▄▄▄▄▄
█████████████
████████████▄███
██▐███████▄█████▀
█████████▄████▀
███▐████▄███▀
████▐██████▀
█████▀█████
███████████▄
████████████▄
██▄█████▀█████▄
▄█████████▀█████▀
███████████▀██▀
████▀█████████
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
c.h.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀▀█











▄▄▄█
▄██████▄▄▄
█████████████▄▄
███████████████
███████████████
███████████████
███████████████
███░░█████████
███▌▐█████████
█████████████
███████████▀
██████████▀
████████▀
▀██▀▀
mikeywith
Legendary
*
Offline Offline

Activity: 2226
Merit: 6405


be constructive or S.T.F.U


View Profile
October 20, 2019, 07:01:45 PM
Last edit: October 21, 2019, 01:10:56 AM by frodocooper
 #4

Also, if you want to pull off the heat-sinks you can check for damage.

What kind of damage is going to be seen underneath the heat-sinks ? the simple answer is non !

you see a chip is not a fuse that will blow and you can know it's damaged using only bear eyes, if he wants to test for a damage chip ( which probably is the reason for this chain to show 0 asic) he can measure resistance and voltage for each chip without having to remove any heat-sink.

usually when a hashing board shows 0 asics it indicates a bad chip, most likely the first or last chip , very seldom a chip in between, or a power module, I am not sure about T9 but in S9 the power module (MOS)  is made of 4 integrated circuits sitting next to each other, 2 at the top and 2 at the bottom, those are very likely to blow and show you 0 asic.



to troubleshoot and fix any of these issues, you need the right skills and tools, if you don't have those before hand then it's a waste of time to buy all those stuff just to fix a single board on a "useless" gear like T9+.

Depending on where you are located, the cost of power, and a bunch of other things it's probably not worth buying a replacement board.
But that's just my opinion.

That's 100% correct, in fact I just saw someone selling a bunch of T9+s for 100-120$ with PSUs in china, with a little bit more digging i am sure you can find them for less than 100$ , but if you were to look for the hash board only, you might see some funny prices.

█▀▀▀











█▄▄▄
▀▀▀▀▀▀▀▀▀▀▀
e
▄▄▄▄▄▄▄▄▄▄▄
█████████████
████████████▄███
██▐███████▄█████▀
█████████▄████▀
███▐████▄███▀
████▐██████▀
█████▀█████
███████████▄
████████████▄
██▄█████▀█████▄
▄█████████▀█████▀
███████████▀██▀
████▀█████████
▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
c.h.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀▀█











▄▄▄█
▄██████▄▄▄
█████████████▄▄
███████████████
███████████████
███████████████
███████████████
███░░█████████
███▌▐█████████
█████████████
███████████▀
██████████▀
████████▀
▀██▀▀
rotem8866 (OP)
Newbie
*
Offline Offline

Activity: 46
Merit: 0


View Profile
October 21, 2019, 02:10:55 PM
 #5

Thanks guys.
I don't think i have the skills for above recommendation's,
But its always nice to learn so i will try those.
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!