"MP TEST FIRMWARE!" on S17 / T17 series control board?

[bgasolder]

I have this firmware, it’s convenient to remove SSH "cannot find signature" protection with it, download in the description under the video.

https://youtu.be/_epKPjo_LZk

[mikeywith]

I have this firmware, it’s convenient to remove SSH "cannot find signature" protection with it, download in the description under the video.

https://youtu.be/_epKPjo_LZk

I wouldn't advise anyone to download this firmware until more information are available, this goes to every other firmware that does not come directly come from the manufacturer itself.

The most important question as far as many people are concern is the hidden fees, i am 100% sure this firmware has some sort of % that goes to the dev's pool which varies from 2% to 10% or even 20% in some cases depending on the developer.

Therefore, as a firmware dev, you need to prove that your firmware has no fees or/and if it does have any fees you need to state it right here, and you need to prove that all fees are transparent, you need to also prove this is not just Bitmain's firmware with ssh unlocked, if you fail to do so, you are simply just another scammer as far as I am concern.

[tim-bc]

Here is the link to the page taserz was referring to, if anyone missed it: https://asic.to/ssh-unlock/

[taserz]

Here is the link to the page taserz was referring to, if anyone missed it: https://asic.to/ssh-unlock/

I actually updated the download link on that page. So you can flash right to MP TEST FIRMWARE. So if you are on the latest firmware you can flash to thatn then flash to my firmware or stock as it does not check signatures.

Video guide: https://www.youtube.com/watch?v=q9i_5KYl4Xw

[thierry4wd]

This firmware are not interest ? just i test it on my T17, and ... just i past litle line by kernel log :

Code:

2020-01-29 21:28:10 driver-btm-soc.c:3313:init_freq_mode: This is fix-freq version
2020-01-29 21:28:10 driver-btm-soc.c:4218:bitmain_soc_init: opt_multi_version=1
2020-01-29 21:28:10 driver-btm-soc.c:4219:bitmain_soc_init: opt_bitmain_ab=1
2020-01-29 21:28:10 driver-btm-soc.c:4220:bitmain_soc_init: opt_bitmain_work_mode=2
2020-01-29 21:28:10 driver-btm-soc.c:3414:init_dev_frequency: fixd frequency is 875
2020-01-29 21:48:51 power.c:267:set_working_voltage: working_voltage = 18.200000
2020-01-29 21:48:51 driver-btm-soc.c:3652:init_working_voltage: set fixed voltage to 18.200000
2020-01-29 21:48:19 power.c:177:power_check_protocol_type: power type APW9 3600W
2020-01-29 21:59:30 driver-btm-soc.c:2183:check_system_work: ideal hash is 52000

So , is allowed to take ALL CONTROL ! freq + voltage + fan !!!

SO ... litle problem lol , not allow for change "test" pool ... is antpool "antminer_1" , if you change it, not hashing ...

[taserz]

Yes it's a demo firmware not used for mining. Flash to Asic.to firmware after you are on it to control stuff