brains429 (OP)
Newbie
Offline
Activity: 10
Merit: 0
|
|
January 07, 2020, 06:17:08 AM Last edit: January 08, 2020, 03:20:26 AM by frodocooper |
|
Hello all. needs yr help in this case. i have no idea 2020-01-06 18:25:55:driver-btm-api.c:901:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2 2020-01-06 18:25:56:driver-btm-api.c:191:set_miner_status: ERROR_SOC_INIT 2020-01-06 18:25:56:driver-btm-api.c:132:stop_mining: stop mining: soc init failed! 2020-01-06 18:25:56:thread.c:764:cancel_read_nonce_reg_thread: cancel thread 2020-01-06 18:25:56:driver-btm-api.c:117:killall_hashboard: ****power off hashboard****
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda nand: Macronix MX30LF2GE8AB nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 nand_read_bbt: bad block at 0x00000ff60000 nand_read_bbt: bad block at 0x00000ff80000 nand_read_bbt: bad block at 0x00000ffa0000 nand_read_bbt: bad block at 0x00000ffc0000 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 512 ubi0: VID header offset: 512 (aligned 512), data offset: 2048 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 2971759534 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1419264 bytes (1 MiB, 11 LEBs), journal size 903169 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 67035 bytes (65 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID F7881EBB-2758-4606-B9D9-7F3EEAB37253, small LPT model ubi1: attaching mtd5 ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read only 64 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read only 64 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read only 64 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 479:0, read 64 bytes CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406050>] (ubi_io_read_ec_hdr+0x68/0x1cc) [<c0406050>] (ubi_io_read_ec_hdr) from [<c040a1d4>] (ubi_attach+0x130/0x1194) [<c040a1d4>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read 512 bytes CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c040a290>] (ubi_attach+0x1ec/0x1194) [<c040a290>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read only 64 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read only 64 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read only 64 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 777:0, read 64 bytes CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406050>] (ubi_io_read_ec_hdr+0x68/0x1cc) [<c0406050>] (ubi_io_read_ec_hdr) from [<c040a1d4>] (ubi_attach+0x130/0x1194) [<c040a1d4>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read 512 bytes CPU: 0 PID: 717 Comm: ubiattach Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c040a290>] (ubi_attach+0x1ec/0x1194) [<c040a290>] (ubi_attach) from [<c0400b28>] (ubi_attach_mtd_dev+0x62c/0xaf8) [<c0400b28>] (ubi_attach_mtd_dev) from [<c0401ff8>] (ctrl_cdev_ioctl+0xf0/0x1ec) [<c0401ff8>] (ctrl_cdev_ioctl) from [<c01d6b88>] (vfs_ioctl+0x20/0x34) [<c01d6b88>] (vfs_ioctl) from [<c01d7488>] (do_vfs_ioctl+0x7d8/0x8b0) [<c01d7488>] (do_vfs_ioctl) from [<c01d7594>] (SyS_ioctl+0x34/0x5c) [<c01d7594>] (SyS_ioctl) from [<c0106f00>] (ret_fast_syscall+0x0/0x3c) ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 129024 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 512 ubi1: VID header offset: 512 (aligned 512), data offset: 2048 ubi1: good PEBs: 1019, bad PEBs: 5, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 865/151, WL threshold: 4096, image sequence number: 1857823607 ubi1: available PEBs: 0, total reserved PEBs: 1019, PEBs reserved for bad PEB handling: 35 ubi1: background thread "ubi_bgt1d" started, PID 720 ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 479:512, read 512 bytes CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0) [<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100) [<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190) [<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0) [<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c) UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 129024 bytes (126 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 125024256 bytes (119 MiB, 969 LEBs), journal size 6322176 bytes (6 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID B08F051B-2357-4CFE-957E-608EF71E3E17, small LPT model ubi1: scrubbed PEB 479 (LEB 0:327), data moved to PEB 14 ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry ubi1 warning: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read only 512 bytes, retry ubi1 error: ubi_io_read: error -74 (ECC error) while reading 512 bytes from PEB 777:512, read 512 bytes CPU: 0 PID: 720 Comm: ubi_bgt1d Not tainted 4.6.0-xilinx-gff8137b-dirty #25 Hardware name: Xilinx Zynq Platform [<c010e718>] (unwind_backtrace) from [<c010a8d0>] (show_stack+0x10/0x14) [<c010a8d0>] (show_stack) from [<c02fcea4>] (dump_stack+0x84/0xa4) [<c02fcea4>] (dump_stack) from [<c0405d64>] (ubi_io_read+0x1d4/0x2a8) [<c0405d64>] (ubi_io_read) from [<c0406220>] (ubi_io_read_vid_hdr+0x6c/0x1d8) [<c0406220>] (ubi_io_read_vid_hdr) from [<c0408280>] (wear_leveling_worker+0x1e0/0x6a0) [<c0408280>] (wear_leveling_worker) from [<c0407770>] (do_work+0xcc/0x100) [<c0407770>] (do_work) from [<c0408dc8>] (ubi_thread+0x100/0x190) [<c0408dc8>] (ubi_thread) from [<c0132960>] (kthread+0xdc/0xf0) [<c0132960>] (kthread) from [<c0106fb8>] (ret_from_fork+0x14/0x3c) ubi1: scrubbed PEB 777 (LEB 0:947), data moved to PEB 902 IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb40000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2020-01-06 18:23:11:driver-btm-api.c:536:init_freq_mode: This is scan-user version 2020-01-06 18:23:11:driver-btm-api.c:1850:bitmain_soc_init: Miner compile time: Wed Nov 20 19:29:06 CST 2019 type: Antminer T17e 2020-01-06 18:23:11:driver-btm-api.c:1851:bitmain_soc_init: commit version: fe37dcc 2019-11-20 19:23:24, build by: lol 2019-11-20 19:38:45 2020-01-06 18:23:11:driver-btm-api.c:1852:bitmain_soc_init: opt_multi_version = 1 2020-01-06 18:23:11:driver-btm-api.c:1853:bitmain_soc_init: opt_bitmain_ab = 1 2020-01-06 18:23:11:driver-btm-api.c:1854:bitmain_soc_init: mid_auto_gen = 0 2020-01-06 18:23:11:driver-btm-api.c:1855:bitmain_soc_init: opt_bitmain_work_mode = 0 2020-01-06 18:23:11:driver-btm-api.c:1669:show_sn: no SN got, please write SN to /nvdata/sn 2020-01-06 18:23:11:fan.c:248:front_fan_power_on: Note: front fan is power on! 2020-01-06 18:23:11:fan.c:260:rear_fan_power_on: Note: rear fan is power on! 2020-01-06 18:23:11:driver-btm-api.c:1006:miner_device_init: Detect 256MB control board of XILINX 2020-01-06 18:23:11:driver-btm-api.c:947:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2020-01-06 18:23:17:driver-btm-api.c:931:init_miner_version: miner ID : 805c150618c0885c 2020-01-06 18:23:17:driver-btm-api.c:937:init_miner_version: FPGA Version = 0xB023 2020-01-06 18:23:19 [chain 0] 0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42 0x0010 42 31 4B 50 33 00 00 00 0A 01 00 01 01 01 03 04 0x0020 04 41 42 5A 5A 5A AD 34 96 13 7A 7A 74 74 7A 7A 0x0030 7A 74 74 7A 7A 7A 74 7A 7A 74 7A 7A 74 7A 7A 7A 0x0040 74 7A 74 74 7A 7A 7A 7A 74 7A 7A 7A 74 7A 7A 7A 0x0050 7A 74 7A 74 7A 74 7A 74 7A 7A 74 7A 74 7A 7A 7A 0x0060 74 7A 7A 74 7A 7A 74 7A 7A 74 7A 7A 7A 74 7A 7A 0x0070 74 7A 7A 74 7A 7A 74 7A 30 07 D7 45 00 00 00 00 0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 81 4B
2020-01-06 18:23:19 fixture_header : 0x1396 2020-01-06 18:23:19 fixture_version : 0x0001 2020-01-06 18:23:19 hash_board_sn : YDFTYH9AIAABB1KP3 2020-01-06 18:23:19 pcb_version : 0x010a 2020-01-06 18:23:19 bom_version : 0x0100 2020-01-06 18:23:19 product_id : 0x01 2020-01-06 18:23:19 board_bin : 0x01 2020-01-06 18:23:19 chip_ft : A4V4 2020-01-06 18:23:19 chip_bin : BIN3 2020-01-06 18:23:19 chip_version : AB 2020-01-06 18:23:19 2020-01-06 18:23:19 miner_header : 0x1396 2020-01-06 18:23:19 work_mode_count : 0x01 2020-01-06 18:23:19 miner_bin : 0x00 2020-01-06 18:23:19 [mode 0] 2020-01-06 18:23:19 voltage : 1840 2020-01-06 18:23:19 ideal_hash_rate : 17879 IC[000]:610 IC[001]:610 IC[002]:580 IC[003]:580 IC[004]:610 IC[005]:610 IC[006]:610 IC[007]:580 IC[008]:580 IC[009]:610 IC[010]:610 IC[011]:610 IC[012]:580 IC[013]:610 IC[014]:610 IC[015]:580 IC[016]:610 IC[017]:610 IC[018]:580 IC[019]:610 IC[020]:610 IC[021]:610 IC[022]:580 IC[023]:610 IC[024]:580 IC[025]:580 IC[026]:610 IC[027]:610 IC[028]:610 IC[029]:610 IC[030]:580 IC[031]:610 IC[032]:610 IC[033]:610 IC[034]:580 IC[035]:610 IC[036]:610 IC[037]:610 IC[038]:610 IC[039]:580 IC[040]:610 IC[041]:580 IC[042]:610 IC[043]:580 IC[044]:610 IC[045]:580 IC[046]:610 IC[047]:610 IC[048]:580 IC[049]:610 IC[050]:580 IC[051]:610 IC[052]:610 IC[053]:610 IC[054]:580 IC[055]:610 IC[056]:610 IC[057]:580 IC[058]:610 IC[059]:610 IC[060]:580 IC[061]:610 IC[062]:610 IC[063]:580 IC[064]:610 IC[065]:610 IC[066]:610 IC[067]:580 IC[068]:610 IC[069]:610 IC[070]:580 IC[071]:610 IC[072]:610 IC[073]:580 IC[074]:610 IC[075]:610 IC[076]:580 IC[077]:610 2020-01-06 18:23:21 [chain 1] 0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42 0x0010 42 31 4B 54 4C 00 00 00 0A 01 00 01 01 01 03 04 0x0020 04 41 42 5A 5A 5A 75 C8 96 13 7C 7C 7C 7C 7C 7C 0x0030 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 0x0040 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 0x0050 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 0x0060 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 7C 0x0070 7C 7C 7C 7C 7C 7C 7C 7C 30 07 2E 48 00 00 00 00 0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF F5 DF
2020-01-06 18:23:22 fixture_header : 0x1396 2020-01-06 18:23:22 fixture_version : 0x0001 2020-01-06 18:23:22 hash_board_sn : YDFTYH9AIAABB1KTL 2020-01-06 18:23:22 pcb_version : 0x010a 2020-01-06 18:23:22 bom_version : 0x0100 2020-01-06 18:23:22 product_id : 0x01 2020-01-06 18:23:22 board_bin : 0x01 2020-01-06 18:23:22 chip_ft : A4V4 2020-01-06 18:23:22 chip_bin : BIN3 2020-01-06 18:23:22 chip_version : AB 2020-01-06 18:23:22 2020-01-06 18:23:22 miner_header : 0x1396 2020-01-06 18:23:22 work_mode_count : 0x01 2020-01-06 18:23:22 miner_bin : 0x00 2020-01-06 18:23:22 [mode 0] 2020-01-06 18:23:22 voltage : 1840 2020-01-06 18:23:22 ideal_hash_rate : 18478 IC[000]:620 IC[001]:620 IC[002]:620 IC[003]:620 IC[004]:620 IC[005]:620 IC[006]:620 IC[007]:620 IC[008]:620 IC[009]:620 IC[010]:620 IC[011]:620 IC[012]:620 IC[013]:620 IC[014]:620 IC[015]:620 IC[016]:620 IC[017]:620 IC[018]:620 IC[019]:620 IC[020]:620 IC[021]:620 IC[022]:620 IC[023]:620 IC[024]:620 IC[025]:620 IC[026]:620 IC[027]:620 IC[028]:620 IC[029]:620 IC[030]:620 IC[031]:620 IC[032]:620 IC[033]:620 IC[034]:620 IC[035]:620 IC[036]:620 IC[037]:620 IC[038]:620 IC[039]:620 IC[040]:620 IC[041]:620 IC[042]:620 IC[043]:620 IC[044]:620 IC[045]:620 IC[046]:620 IC[047]:620 IC[048]:620 IC[049]:620 IC[050]:620 IC[051]:620 IC[052]:620 IC[053]:620 IC[054]:620 IC[055]:620 IC[056]:620 IC[057]:620 IC[058]:620 IC[059]:620 IC[060]:620 IC[061]:620 IC[062]:620 IC[063]:620 IC[064]:620 IC[065]:620 IC[066]:620 IC[067]:620 IC[068]:620 IC[069]:620 IC[070]:620 IC[071]:620 IC[072]:620 IC[073]:620 IC[074]:620 IC[075]:620 IC[076]:620 IC[077]:620 2020-01-06 18:23:23 [chain 2] 0x0000 96 13 01 00 59 44 46 54 59 48 39 41 49 41 41 42 0x0010 42 31 4C 34 32 00 00 00 0A 01 00 01 01 01 03 04 0x0020 04 41 42 5A 5A 5A 26 47 96 13 7C 7C 7C 7C 76 76 0x0030 76 7C 7C 7C 76 7C 7C 7C 7C 7C 76 76 7C 7C 7C 76 0x0040 7C 76 7C 7C 76 76 7C 7C 7C 7C 76 7C 76 7C 7C 7C 0x0050 7C 76 76 7C 7C 7C 76 76 7C 7C 76 7C 7C 7C 76 7C 0x0060 76 76 7C 7C 7C 7C 76 7C 7C 76 7C 7C 76 7C 7C 76 0x0070 7C 7C 7C 7C 76 76 7C 7C 30 07 FD 46 00 00 00 00 0x0080 01 00 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x0090 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00A0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00E0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF 0x00F0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 75 F3
2020-01-06 18:23:24 fixture_header : 0x1396 2020-01-06 18:23:24 fixture_version : 0x0001 2020-01-06 18:23:24 hash_board_sn : YDFTYH9AIAABB1L42 2020-01-06 18:23:24 pcb_version : 0x010a 2020-01-06 18:23:24 bom_version : 0x0100 2020-01-06 18:23:24 product_id : 0x01 2020-01-06 18:23:24 board_bin : 0x01 2020-01-06 18:23:24 chip_ft : A4V4 2020-01-06 18:23:24 chip_bin : BIN3 2020-01-06 18:23:24 chip_version : AB 2020-01-06 18:23:24 2020-01-06 18:23:24 miner_header : 0x1396 2020-01-06 18:23:24 work_mode_count : 0x01 2020-01-06 18:23:24 miner_bin : 0x00 2020-01-06 18:23:24 [mode 0] 2020-01-06 18:23:24 voltage : 1840 2020-01-06 18:23:24 ideal_hash_rate : 18173 IC[000]:620 IC[001]:620 IC[002]:620 IC[003]:620 IC[004]:590 IC[005]:590 IC[006]:590 IC[007]:620 IC[008]:620 IC[009]:620 IC[010]:590 IC[011]:620 IC[012]:620 IC[013]:620 IC[014]:620 IC[015]:620 IC[016]:590 IC[017]:590 IC[018]:620 IC[019]:620 IC[020]:620 IC[021]:590 IC[022]:620 IC[023]:590 IC[024]:620 IC[025]:620 IC[026]:590 IC[027]:590 IC[028]:620 IC[029]:620 IC[030]:620 IC[031]:620 IC[032]:590 IC[033]:620 IC[034]:590 IC[035]:620 IC[036]:620 IC[037]:620 IC[038]:620 IC[039]:590 IC[040]:590 IC[041]:620 IC[042]:620 IC[043]:620 IC[044]:590 IC[045]:590 IC[046]:620 IC[047]:620 IC[048]:590 IC[049]:620 IC[050]:620 IC[051]:620 IC[052]:590 IC[053]:620 IC[054]:590 IC[055]:590 IC[056]:620 IC[057]:620 IC[058]:620 IC[059]:620 IC[060]:590 IC[061]:620 IC[062]:620 IC[063]:590 IC[064]:620 IC[065]:620 IC[066]:590 IC[067]:620 IC[068]:620 IC[069]:590 IC[070]:620 IC[071]:620 IC[072]:620 IC[073]:620 IC[074]:590 IC[075]:590 IC[076]:620 IC[077]:620 2020-01-06 18:23:24:thread.c:719:create_read_nonce_reg_thread: create thread 2020-01-06 18:23:24:eeprom.c:867:display_board_info: chain[0] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB 2020-01-06 18:23:24:eeprom.c:867:display_board_info: chain[1] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB 2020-01-06 18:23:24:eeprom.c:867:display_board_info: chain[2] board bin: 1, chip bin: 3, chip ft: A4V4, chip version: AB 2020-01-06 18:23:24:driver-btm-api.c:572:get_product_id: product_id[0] = 1 2020-01-06 18:23:24:driver-btm-api.c:572:get_product_id: product_id[1] = 1 2020-01-06 18:23:24:driver-btm-api.c:572:get_product_id: product_id[2] = 1 2020-01-06 18:23:24:driver-btm-api.c:552:dump_pcb_bom_version: Chain [0] PCB Version: 0x010a 2020-01-06 18:23:24:driver-btm-api.c:553:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-01-06 18:23:24:driver-btm-api.c:552:dump_pcb_bom_version: Chain [1] PCB Version: 0x010a 2020-01-06 18:23:24:driver-btm-api.c:553:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-01-06 18:23:24:driver-btm-api.c:552:dump_pcb_bom_version: Chain [2] PCB Version: 0x010a 2020-01-06 18:23:24:driver-btm-api.c:553:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-01-06 18:23:28:driver-btm-api.c:1803:bitmain_board_init: Fan check passed. 2020-01-06 18:23:29:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-01-06 18:23:31:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-01-06 18:23:32:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-01-06 18:23:34:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-01-06 18:23:35:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-01-06 18:23:37:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-01-06 18:23:37:thread.c:714:create_pic_heart_beat_thread: create thread 2020-01-06 18:23:39:power_api.c:238:power_init: power type version: 0x0042 2020-01-06 18:23:39:power_api.c:256:power_init: Power init: 2020-01-06 18:23:39:power_api.c:257:power_init: current_voltage_raw = 0 2020-01-06 18:23:39:power_api.c:258:power_init: highest_voltage_raw = 2000 2020-01-06 18:23:39:power_api.c:259:power_init: working_voltage_raw = 1800 2020-01-06 18:23:39:power_api.c:260:power_init: higher_voltage_raw = 1850 2020-01-06 18:23:39:power_api.c:261:power_init: check_asic_voltage_raw = 1800 2020-01-06 18:23:39:driver-btm-api.c:1813:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-01-06 18:23:39:power_api.c:226:power_off: init gpio907 2020-01-06 18:24:11:power_api.c:313:set_to_check_asic_voltage: Set to voltage raw 1800, one step. 2020-01-06 18:24:21:uart.c:69:set_baud: set UART baud to 115200 2020-01-06 18:24:28:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0 2020-01-06 18:24:29:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-01-06 18:24:31:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-01-06 18:24:38:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1 2020-01-06 18:24:39:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-01-06 18:24:41:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-01-06 18:24:48:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2 2020-01-06 18:24:49:board.c:80:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-01-06 18:24:51:board.c:93:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-01-06 18:24:51:driver-btm-api.c:901:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0 2020-01-06 18:25:00:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0 2020-01-06 18:25:01:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-01-06 18:25:03:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-01-06 18:25:10:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1 2020-01-06 18:25:11:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-01-06 18:25:13:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-01-06 18:25:20:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2 2020-01-06 18:25:22:board.c:80:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-01-06 18:25:24:board.c:93:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-01-06 18:25:24:driver-btm-api.c:901:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1 2020-01-06 18:25:32:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0 2020-01-06 18:25:33:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-01-06 18:25:35:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-01-06 18:25:42:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1 2020-01-06 18:25:43:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-01-06 18:25:45:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-01-06 18:25:52:driver-btm-api.c:844:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2 2020-01-06 18:25:53:board.c:80:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-01-06 18:25:55:board.c:93:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-01-06 18:25:55:driver-btm-api.c:901:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2 2020-01-06 18:25:56:driver-btm-api.c:191:set_miner_status: ERROR_SOC_INIT 2020-01-06 18:25:56:driver-btm-api.c:132:stop_mining: stop mining: soc init failed! 2020-01-06 18:25:56:thread.c:764:cancel_read_nonce_reg_thread: cancel thread 2020-01-06 18:25:56:driver-btm-api.c:117:killall_hashboard: ****power off hashboard****
|