mikeywith
Legendary
Offline
Activity: 2226
Merit: 6367
be constructive or S.T.F.U
|
|
December 06, 2020, 01:38:18 PM Last edit: December 06, 2020, 02:09:17 PM by mikeywith |
|
Bitmain doesn't really shame on their dirty ways of making money for the owners! Indeed, I think they trapped him into sending his gear by quoting him an estimate of $30 to fix his S17+, what kind of a fix would bitmain put their staff on for $30 , anyway, people should look for alternative ways to fix their gears, check zeusbtc or ask other forum members about workshops that are specialized in mining, phill knows a few in the U.S he perhaps should make a dedicated topic in regards to that.
|
|
|
|
|
|
|
Even in the event that an attacker gains more than 50% of the network's
computational power, only transactions sent by the attacker could be
reversed or double-spent. The network would not be destroyed.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
wndsnb
|
|
December 06, 2020, 05:32:40 PM Last edit: December 08, 2020, 02:01:27 AM by frodocooper |
|
Found the post where phil recommends a repair place. Not sure if those prices are up to date, the web site currently says $150/$250 for basic/advanced repair. I'm in NC. Can I send you my PSUs to test? Or can you send me a working one and I'll pay for shipping?
We have a repair guy we use that is located in NC. Give me 5 minutes to find the link. He has been a godsend with psu replacement. I used https://hmtech.co/ (919) 283-2715 they do repair m20s they sold me a m20s psu a p21 they also have bitmain parts and repairs. Tell them philipma1957 of bitcointalk linked you. I get zero money for this. But I like that they know I send them people. He has to be close to you as it is the same state. He has helped 4 or 5 of us with psu replacements. yeah they seem to have really dropped in their service . I won't be using them to get a m30s. I used https://hmtech.co/ (919) 283-2715 they do repair m20s they sold me a m20s psu a p21 ASIC Repair : Basic / Advanced Bitmain $300 / $400 S17 & T17 Whatsminer $300 / $400 M20s & M21S Innosilicon $300 / $400 T3 series ASIC PSU's Innosilicon T3 series PSU $200 New Whatspower P21 PSU $200 New Innosilicon T2 double fan series & T3 PSU $200 New
good luck.
|
Have some dead Bitmain 17 series hashboards or full miners? I'll buy them ... send me a PM with what you have and I'll make you an offer!
|
|
|
mikeywith
Legendary
Offline
Activity: 2226
Merit: 6367
be constructive or S.T.F.U
|
|
December 08, 2020, 12:27:14 AM Last edit: December 08, 2020, 02:01:55 AM by frodocooper |
|
Thanks for finding the post, I started this topic to help the mining community locate repair services nearby, since sending gears back to China isn't working as it should, I believe this thread would be very helpful, I hope that we all band together to grow the list in that topic.
|
|
|
|
mikxxy
Newbie
Offline
Activity: 21
Merit: 7
|
|
December 08, 2020, 08:48:19 PM Last edit: December 11, 2020, 02:33:38 AM by frodocooper |
|
So how is the frozen hashboard doing now? I know the freezing trick works on weakening the adhesive and make the heatsink easier to remove, not exactly sure how it would help to make it stick harder!! I would love to hear more from other members, NFW and wndsnb can perhaps shed some light on the subject.
Yes it's still stable since i started it, even though i OC it a little to kompensate for the dead card. Chain# ASIC# Frequency(avg) Voltage Consumption (W) GH/S(ideal) GH/S(RT) Errors(HW) Temp(PCB) Temp(Chip) ASIC status 1 24 0 15.8 15 0.00 0.00 0 0-0-0-0 0-0-0-0 Failed to detect ASIC chips 2 30 750 15.8 684 15,120.00 14,789.48 1 54-59-52-57 76-82-76-79 ooo ooo ooo ooo ooo ooo ooo ooo ooo ooo 3 30 750 15.8 684 15,120.00 15,022.88 2 52-56-51-55 75-78-73-75 ooo ooo ooo ooo ooo ooo ooo ooo ooo ooo Total 84 750 1383 30,240.00 29,812.36 3 going to try to fix the dead card once i get the board fixture, but i thnk it will require a lot of expirience and gear to rework the ASIC chip. Anyone that did this operation with good outcome? By the way is miners.eu a trusted vendor?
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2226
Merit: 6367
be constructive or S.T.F.U
|
|
December 08, 2020, 09:19:06 PM Last edit: December 11, 2020, 02:34:42 AM by frodocooper |
|
Yes it's still stable since i started it, even though i OC it a little to kompensate for the dead card.
That is good news, temps look good too, I will try the trick soon, I will need to go the farm to pick up all the dead 17 series, I have a lot of them, since the trick is cheap and easy it's worth the try. By the way is miners.eu a trusted vendor?
Nop, they are likely scammers, there are a few accusations against them in this thread , also their Trustpilot reviews aren't great, see one thing to notice about Trustpilot is that positive reviews can be faked easily because they require no proof, while negatives require verifications such as emails, screenshots and all that, the seller can dispute against your negative feedback and have it deleted, so negative feedback outweighs a 100 positive once. Here is one recent feedback: You wont get any items from them I paid my order 8 weeks ago, product should be "in stock, shipped in 5 days" no product, no refund so far.
Chat on their website mysteriously closes after you have made your payment. No answer to phone and to email rarely, telling to wait more.
I have made police report of them.
They reply in 10 min when it's on their favor, 2-4weeks when yours.
They offered to pay me to get my previous review off so I did but ofc they didn't paid so its here again.
They will threat you with lawsuit for sure if you share your negative experience.
Nobody knows or trusts John, but the fact that his verified negative feedback is still there simply means that the accused party failed to prove that John is lying, which means they have indeed scammed him.
|
|
|
|
mikxxy
Newbie
Offline
Activity: 21
Merit: 7
|
|
December 08, 2020, 10:18:02 PM Last edit: December 11, 2020, 02:35:14 AM by frodocooper |
|
I'm thinking most conviinient is to freeze the whole miner:) and pick up used freezer cheap on the way??? miners.eu have good prices on etherum miners, much better than Prominerz, which seem to "trusted" pricing policy by up to 20% compared to miners.eu. It seems there some talking regarding "negative elements" making it hard to distinguish inbetween the vendors, scamers i.e unhappy buyers, competitors trying to miscredit each other as scammers. Whats your opion on that? Is asicminervalue.com to be a trusted as non afiliated party? They have markings "trusted" on some vendors (obviously based on some simple algortim, but still they are risking to discredit thier trademark if they are deviating with their "Trusted" marks to much. Just my 2 cents.
|
|
|
|
favebook
|
|
December 09, 2020, 02:30:53 AM |
|
Is asicminervalue.com to be a trusted as non afiliated party? They have markings "trusted" on some vendors (obviously based on some simple algortim, but still they are risking to discredit thier trademark if they are deviating with their "Trusted" marks to much. Just my 2 cents
Read FAQ from time to time. It might be fruitful for you: All vendor listed are legit? We try to check vendors to provide the safest links possible, but we cannot guarantee any of them.
You must be aware that all external links are out of our control, and one store may be safe for some users and give one bad experience to another.
All labels and risk estimates are given "as is" based on our experience and feedback from the community.
|
|
|
|
Moeter81
Member
Offline
Activity: 61
Merit: 29
|
|
December 09, 2020, 05:53:12 AM Last edit: December 11, 2020, 02:36:13 AM by frodocooper |
|
I phoned Dominic Alders (Miners.eu) 2 weeks ago. I asked him which miners he could deliver from the warehouse immediately. His answer was that you don't have any miners in stock. (according to the website, some devices are shown as available). All miners, but could be delivered between 7-14 days.
My order was executed and paid for on November 17th, 2020. Unfortunately I haven't received a miner yet and communication is difficult. I hope it will turn out well, I will report.
|
|
|
|
mtnrotary
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 12, 2020, 08:52:26 PM |
|
Hi all, I've read through some of this thread and am amazed to see the number of errors people have had with their s17's. I'm in a similar boat however not so familiar so was after some help in trying to determine what to do next. Long story short, 3 of my miners are hosted in Canada. The mining company elected to transfer the miners across the country and within days of arriving at the new site all three died. I have access to the serial numbers and kernal logs but trying to figure out what to post to help determine the issue? The problem is complicated by the fact the mining company is being rather unhelpful, and I'm on the other side of the world to Canada. Anyway, any assistance would be greatly appreciated
|
|
|
|
wndsnb
|
|
December 12, 2020, 09:26:26 PM Last edit: December 13, 2020, 08:30:30 AM by frodocooper |
|
A good start would be to post the kernel logs.
Are they not hashing at all, or hashing and then shutting down after a period of time?
|
Have some dead Bitmain 17 series hashboards or full miners? I'll buy them ... send me a PM with what you have and I'll make you an offer!
|
|
|
|
Costar79
Newbie
Offline
Activity: 2
Merit: 0
|
|
December 20, 2020, 05:18:01 AM Last edit: December 20, 2020, 11:30:25 PM by frodocooper |
|
Hi all, I bought two second hand s17+ from coinminingcentral of the 140 Th i was hoping to get out of these two machines i am only getting 50 to 80. All kinds of problems, the common ones, temp sensors hash boards going off line all that jazz. The first machine, the better one starts up at with all three chains running and the after a couple of hours gets a temp sensor error and then shuts that board off. 70Th down to 50Th then seems to stay like that until i reboot the machine and then the board starts up again back to 70Th YAAAY for a couple of hours again and boops back offline! The second machine seems to have only one board that functions correctly, ill leave the log here so someone can make sense of whats happening. 2020-12-20 03:47:35 driver-btm-api.c:1239:init_miner_version: miner ID : 80781c864e10481c 2020-12-20 03:47:35 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023 2020-12-20 03:47:40 driver-btm-api.c:837:get_product_id: product_id[0] = 0 2020-12-20 03:47:40 driver-btm-api.c:837:get_product_id: product_id[1] = 0 2020-12-20 03:47:40 driver-btm-api.c:837:get_product_id: product_id[2] = 0 2020-12-20 03:47:40 driver-btm-api.c:792:_set_project_type: project:0 2020-12-20 03:47:40 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+ 2020-12-20 03:47:40 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2020-12-20 03:47:40 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-12-20 03:47:40 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2020-12-20 03:47:40 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-12-20 03:47:40 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2020-12-20 03:47:40 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-12-20 03:47:42 driver-btm-api.c:2372:bitmain_board_init: Fan check passed. 2020-12-20 03:47:43 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-12-20 03:47:46 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-12-20 03:47:47 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-12-20 03:47:49 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-12-20 03:47:50 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-12-20 03:47:52 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-12-20 03:47:52 thread.c:1358:create_pic_heart_beat_thread: create thread 2020-12-20 03:47:52 power_api.c:213:power_init: Power init: 2020-12-20 03:47:52 power_api.c:214:power_init: current_voltage_raw = 0 2020-12-20 03:47:52 power_api.c:215:power_init: highest_voltage_raw = 2100 2020-12-20 03:47:52 power_api.c:216:power_init: working_voltage_raw = 1950 2020-12-20 03:47:52 power_api.c:217:power_init: higher_voltage_raw = 2040 2020-12-20 03:47:52 power_api.c:218:power_init: check_asic_voltage_raw = 2100 2020-12-20 03:47:52 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-12-20 03:47:52 power_api.c:186:power_off: init gpio907 2020-12-20 03:48:24 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step. 2020-12-20 03:48:50 power_api.c:85:check_voltage_multi: retry time: 0 2020-12-20 03:48:51 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.970549 2020-12-20 03:48:52 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.924359 2020-12-20 03:48:53 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.897566 2020-12-20 03:48:53 power_api.c:53:_get_avg_voltage: average_voltage = 20.930825 2020-12-20 03:48:53 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.93, check voltage passed. 2020-12-20 03:48:53 uart.c:72:set_baud: set fpga_baud to 115200 2020-12-20 03:49:04 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0 2020-12-20 03:49:15 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 0 2020-12-20 03:49:26 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 1 2020-12-20 03:49:37 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 2 2020-12-20 03:49:37 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-12-20 03:49:46 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 3 2020-12-20 03:49:46 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050 2020-12-20 03:49:46 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step. 2020-12-20 03:49:49 power_api.c:85:check_voltage_multi: retry time: 0 2020-12-20 03:49:52 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.433504 2020-12-20 03:49:53 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.411010 2020-12-20 03:49:54 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.386683 2020-12-20 03:49:54 power_api.c:53:_get_avg_voltage: average_voltage = 20.410399 2020-12-20 03:49:54 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.41, check voltage passed. chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-12-20 03:50:03 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 4 2020-12-20 03:50:03 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000 2020-12-20 03:50:03 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step. 2020-12-20 03:50:06 power_api.c:85:check_voltage_multi: retry time: 0 2020-12-20 03:50:08 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.947570 2020-12-20 03:50:09 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.924455 2020-12-20 03:50:10 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.900127 2020-12-20 03:50:10 power_api.c:53:_get_avg_voltage: average_voltage = 19.924051 2020-12-20 03:50:10 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.92, check voltage passed. chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-12-20 03:50:19 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 5 2020-12-20 03:50:19 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 2020-12-20 03:50:19 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step. 2020-12-20 03:50:24 power_api.c:85:check_voltage_multi: retry time: 0 2020-12-20 03:50:26 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.892719 2020-12-20 03:50:27 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.897566 2020-12-20 03:50:28 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.873238 2020-12-20 03:50:28 power_api.c:53:_get_avg_voltage: average_voltage = 20.887841 2020-12-20 03:50:28 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.89, check voltage passed. 2020-12-20 03:50:28 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 50 asic, will power off hash board 1 2020-12-20 03:50:29 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.770968, an2 2.770968, an6 2.519355. 2020-12-20 03:50:41 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0 2020-12-20 03:50:46 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003 2020-12-20 03:50:46 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3 2020-12-20 03:50:47 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3 2020-12-20 03:50:47 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2020-12-20 03:50:47 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6 2020-12-20 03:50:47 voltage[0] = 1960 2020-12-20 03:50:47 voltage[2] = 1960 2020-12-20 03:50:47 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960 2020-12-20 03:50:49 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218 2020-12-20 03:50:50 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218 2020-12-20 03:50:50 uart.c:72:set_baud: set fpga_baud to 12000000 2020-12-20 03:50:51 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 23 2020-12-20 03:50:51 thread.c:1378:create_check_miner_status_thread: create thread 2020-12-20 03:50:51 thread.c:1368:create_show_miner_status_thread: create thread 2020-12-20 03:50:51 thread.c:1348:create_temperature_monitor_thread: create thread 2020-12-20 03:50:51 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 23 dec_freq_index=0 2020-12-20 03:50:51 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650 2020-12-20 03:50:51 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work. 2020-12-20 03:50:51 thread.c:1338:create_asic_status_monitor_thread: create thread 2020-12-20 03:50:51 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 515, is_higher_voltage = true 2020-12-20 03:51:41 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step. 2020-12-20 03:51:43 power_api.c:85:check_voltage_multi: retry time: 0 2020-12-20 03:51:45 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.797954 2020-12-20 03:51:46 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.700767 2020-12-20 03:51:46 power_api.c:53:_get_avg_voltage: average_voltage = 20.749361 2020-12-20 03:51:46 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.75, check voltage passed. 2020-12-20 03:55:20 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx 2020-12-20 03:55:21 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times. 2020-12-20 03:55:22 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx 2020-12-20 03:55:23 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times. 2020-12-20 03:55:24 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx 2020-12-20 03:55:25 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 2 times. 2020-12-20 03:55:26 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx 2020-12-20 03:55:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 150, reg = 28, got chain = 0, chip = 0, reg = 1 2020-12-20 03:55:27 register.c:313:get_register: !!! REG_TYPE = 1. 704673792 2020-12-20 03:55:27 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 3 times. 2020-12-20 03:55:28 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 56, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxox xxxxx 2020-12-20 03:55:29 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 4 times. 2020-12-20 03:55:29 thread.c:1297:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 5 times, power off. 2020-12-20 03:55:30 temperature.c:843:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1 2020-12-20 03:56:02 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2060, step by step. 2020-12-20 03:56:04 power_api.c:85:check_voltage_multi: retry time: 0 2020-12-20 03:56:05 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.384910 2020-12-20 03:56:05 power_api.c:53:_get_avg_voltage: average_voltage = 20.384910 2020-12-20 03:56:05 power_api.c:71:check_voltage: target_vol = 20.60, actural_vol = 20.38, check voltage passed. 2020-12-20 03:56:05 frequency.c:1181:inc_asic_diff_freq_by_steps: chain = 2, start = 515, freq_step = 5 2020-12-20 03:56:09 driver-btm-api.c:765:set_timeout: freq = 545, percent = 90, hcn = 44236, timeout = 81 2020-12-20 03:56:09 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1960, step by step. 2020-12-20 03:56:14 power_api.c:85:check_voltage_multi: retry time: 0 2020-12-20 03:56:15 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.413043 2020-12-20 03:56:15 power_api.c:53:_get_avg_voltage: average_voltage = 19.413043 2020-12-20 03:56:15 power_api.c:71:check_voltage: target_vol = 19.60, actural_vol = 19.41, check voltage passed. 2020-12-20 03:56:15 thread.c:1373:create_check_system_status_thread: create thread 2020-12-20 03:56:16 driver-btm-api.c:2618:bitmain_soc_init: Init done! 2020-12-20 03:56:16 driver-btm-api.c:222:set_miner_status: STATUS_INIT 2020-12-20 03:56:20 driver-btm-api.c:222:set_miner_status: STATUS_OKAY 2020-12-20 03:56:21 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 22699 2020-12-20 03:56:21 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 22000 2020-12-20 03:56:26 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2020-12-20 03:56:26 driver-btm-api.c:1644:dhash_chip_send_job: stime.tv_sec 1608436586, block_ntime 1608436571
Can someone pls pls advise me of what my next steps should be here. Here are the kernel versions for both machines: Kernel Version Linux 4.6.0-xilinx-gff8137b-dirty #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 File System Version Tue Jun 2 10:31:07 CST 2020
I am thinking of replacing the board with the temp sensor error on the first machine with the board from the second machine that seems to be working and then maybe sending a full machine away for repairs. Any suggestions?
|
|
|
|
wndsnb
|
|
December 20, 2020, 02:26:25 PM Last edit: December 20, 2020, 11:31:37 PM by frodocooper |
|
2020-12-20 03:49:15 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 0 2020-12-20 03:49:26 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 1 2020-12-20 03:49:37 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 50 asic, times 2 2020-12-20 03:49:37 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100
[...]
2020-12-20 03:55:20 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx 2020-12-20 03:55:21 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times. 2020-12-20 03:55:22 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx 2020-12-20 03:55:23 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times. 2020-12-20 03:55:24 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx 2020-12-20 03:55:25 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 2 times. 2020-12-20 03:55:26 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 55, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxxx xxxxx 2020-12-20 03:55:26 register.c:160:read_asic_reg_with_addr: read asic reg error: expect chain = 2, chip = 150, reg = 28, got chain = 0, chip = 0, reg = 1 2020-12-20 03:55:27 register.c:313:get_register: !!! REG_TYPE = 1. 704673792 2020-12-20 03:55:27 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 3 times. 2020-12-20 03:55:28 thread.c:1273:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 56, require 65, failed times 1: ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo ooooo xxxox xxxxx 2020-12-20 03:55:29 thread.c:1293:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 4 times. 2020-12-20 03:55:29 thread.c:1297:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 5 times, power off. 2020-12-20 03:55:30 temperature.c:843:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 50, reg = 1
Looks like chain 1 is not able to get status back from chip 51 - 65, which could there is an issue with asic chip 50 or 51, or an issue with the voltage regulation for 51 - 55. Could be bad solder joints, excess solder from the heatsink shorting signals out, or just a bad chip. Essentially the same for chain 0, but it manages to get the status back initially but then fails once the board starts hashing. That can happen because solder connections break or short when the board heats up or the voltage regulation dies once the board starts drawing more current. I don't think you can hurt anything by swapping hashboards around, although some 17 series hashboards don't mix with others, so it may not work. My understanding is that the control board needs all the hashboards to be running the same firmware. Did these machines arrive like this? If so, is coinminingcentral not being helpful? If you've read through this thread then you know sending a miner to Bitmain for repair is not a good idea, so definitely try to find a 3rd party to repair them. If you send it to Bitmain you might never see it again. So in my opinion, best option is to get coinminingcentral to make good in some way, second best option is to find a repair shop.
|
Have some dead Bitmain 17 series hashboards or full miners? I'll buy them ... send me a PM with what you have and I'll make you an offer!
|
|
|
mikeywith
Legendary
Offline
Activity: 2226
Merit: 6367
be constructive or S.T.F.U
|
|
December 21, 2020, 05:03:05 AM Last edit: December 22, 2020, 11:22:18 PM by frodocooper |
|
There is no firmware on those hash boards, it's just the hex file difference, most miners will show some sort of id type for each hashboard, those need to be identical, these info can be found either on the hash board itself or the kernel log, you should look for things like typeID, major type or minor type, product id or any other info that shows at the top of the kernel log which specifies a certain value for each of the hash boards you have installed. here is an example of mixed boards on an S9: Chain[J6] chip[244] get middle temp offset=28 typeID=55 Chain[J7] chip[244] get middle temp offset=27 typeID=1a Chain[J8] chip[244] get middle temp offset=27 typeID=55
Chain 7 has a different type id but the miner works just fine because well, it's an S9 after all . Here is another example of an S9k: read chain[0] hardware info: major type: 0 minor type: 2 chip level: 0 bom version: 0x10 pcb version: 0x39
read chain[2] hardware info: major type: 0 minor type: 2 chip level: 0 bom version: 0x10 pcb version: 0x39
There is no exact word/value to look for, but it's pretty self-explanatory.
|
|
|
|
mtnrotary
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 21, 2020, 06:15:53 PM Last edit: December 22, 2020, 11:23:07 PM by frodocooper |
|
They're not hashing at all, or just very low hash. At this point Bitmain have said to ship all three back to them . Any tips would be greatly appreciated! Worker 1 Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203544K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25832K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12792K (cce82000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 6/1, WL threshold: 4096, image sequence number: 262741923 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 404/140, WL threshold: 4096, image sequence number: 3563076859 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2020-10-15 11:30:38 driver-btm-api.c:632:init_freq_mode: This is scan-user version 2020-10-15 11:30:38 driver-btm-api.c:1815:bitmain_soc_init: opt_multi_version = 1 2020-10-15 11:30:38 driver-btm-api.c:1816:bitmain_soc_init: opt_bitmain_ab = 1 2020-10-15 11:30:38 driver-btm-api.c:1817:bitmain_soc_init: opt_bitmain_work_mode = 0 2020-10-15 11:30:38 driver-btm-api.c:1818:bitmain_soc_init: Miner compile time: Fri Dec 6 13:23:09 CST 2019 type: Antminer S17+ 2020-10-15 11:30:38 driver-btm-api.c:1819:bitmain_soc_init: commit version: c767010 2019-12-04 14:22:30, build by: lol 2019-12-06 13:31:56 2020-10-15 11:30:38 driver-btm-api.c:1655:show_sn: no SN got, please write SN to /nvdata/sn 2020-10-15 11:30:38 fan.c:236:front_fan_power_on: Note: front fan is power on! 2020-10-15 11:30:38 fan.c:248:rear_fan_power_on: Note: rear fan is power on! 2020-10-15 11:30:38 driver-btm-api.c:1110:miner_device_init: Detect 256MB control board of XILINX 2020-10-15 11:30:38 driver-btm-api.c:1058:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2020-10-15 11:30:38 thread.c:731:create_read_nonce_reg_thread: create thread 2020-10-15 11:30:44 driver-btm-api.c:1042:init_miner_version: miner ID : 8168242429e04814 2020-10-15 11:30:44 driver-btm-api.c:1048:init_miner_version: FPGA Version = 0xB023 2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[0] = 0 2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[1] = 0 2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[2] = 0 2020-10-15 11:30:49 driver-btm-api.c:645:_set_project_type: project:0 2020-10-15 11:30:49 driver-btm-api.c:665:_set_project_type: Project type: Antminer S17+ 2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-10-15 11:30:53 driver-btm-api.c:1764:bitmain_board_init: Fan check passed. 2020-10-15 11:30:54 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-10-15 11:30:56 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-10-15 11:30:57 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-10-15 11:31:00 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-10-15 11:31:01 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-10-15 11:31:03 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-10-15 11:31:03 thread.c:726:create_pic_heart_beat_thread: create thread 2020-10-15 11:31:03 power_api.c:208:power_init: Power init: 2020-10-15 11:31:03 power_api.c:209:power_init: current_voltage_raw = 0 2020-10-15 11:31:03 power_api.c:210:power_init: highest_voltage_raw = 2100 2020-10-15 11:31:03 power_api.c:211:power_init: working_voltage_raw = 1950 2020-10-15 11:31:03 power_api.c:212:power_init: higher_voltage_raw = 2040 2020-10-15 11:31:03 driver-btm-api.c:1774:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-10-15 11:31:03 power_api.c:182:power_off: init gpio907 2020-10-15 11:31:35 power_api.c:262:set_to_highest_voltage: Set to voltage raw 2100, one step. 2020-10-15 11:31:37 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:31:38 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 21.016624 2020-10-15 11:31:39 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 21.040921 2020-10-15 11:31:40 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 21.089514 2020-10-15 11:31:40 power_api.c:51:_get_avg_voltage: average_voltage = 21.049020 2020-10-15 11:31:40 power_api.c:69:check_voltage: target_vol = 21.00, actural_vol = 21.05, check voltage passed. 2020-10-15 11:31:40 uart.c:71:set_baud: set fpga_baud to 115200 2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26 2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26 2020-10-15 11:31:51 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0 2020-10-15 11:32:02 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0 2020-10-15 11:32:13 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1 2020-10-15 11:32:23 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2 2020-10-15 11:32:23 driver-btm-api.c:1010:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1 2020-10-15 11:32:25 driver-btm-api.c:1012:check_asic_number: Chain 1 voltage: an0 = 2.783871, an2 2.790323, an6 2.522581. 2020-10-15 11:32:37 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0 2020-10-15 11:32:43 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003 2020-10-15 11:32:43 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 2020-10-15 11:32:43 driver-btm-api.c:352:set_order_clock: chain[2]: set order clock, stragegy 3 2020-10-15 11:32:43 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2020-10-15 11:32:43 voltage[0] = 1940 2020-10-15 11:32:43 voltage[2] = 1940 2020-10-15 11:32:43 power_api.c:220:set_working_voltage_raw: working_voltage_raw = 1940 2020-10-15 11:32:44 temperature.c:314:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218 2020-10-15 11:32:45 temperature.c:314:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218 2020-10-15 11:32:45 uart.c:71:set_baud: set fpga_baud to 12000000 2020-10-15 11:32:45 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 12000000, chip_divider = 3 2020-10-15 11:32:45 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 12000000, chip_divider = 3 2020-10-15 11:32:46 driver-btm-api.c:241:check_bringup_temp: Bring up temperature is 15 2020-10-15 11:32:46 thread.c:746:create_check_miner_status_thread: create thread 2020-10-15 11:32:46 thread.c:736:create_show_miner_status_thread: create thread 2020-10-15 11:32:46 thread.c:721:create_temperature_monitor_thread: create thread 2020-10-15 11:32:46 freq_tuning.c:145:freq_tuning_get_max_freq: Max freq of tuning is 650 2020-10-15 11:32:46 frequency.c:770:inc_freq_with_fixed_vco: chain = 255, freq = 540, is_higher_voltage = true 2020-10-15 11:32:55 frequency.c:811:inc_freq_with_fixed_step: chain = 0, freq_start = 540, freq_end = 590, freq_step = 5, is_higher_voltage = true 2020-10-15 11:32:57 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2090, step by step. 2020-10-15 11:32:58 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:32:59 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.822251 2020-10-15 11:33:00 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 20.892719 2020-10-15 11:33:00 power_api.c:51:_get_avg_voltage: average_voltage = 20.857485 2020-10-15 11:33:00 power_api.c:69:check_voltage: target_vol = 20.90, actural_vol = 20.86, check voltage passed. 2020-10-15 11:33:04 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2070, step by step. 2020-10-15 11:33:06 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:33:07 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.627877 2020-10-15 11:33:08 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 20.725064 2020-10-15 11:33:08 power_api.c:51:_get_avg_voltage: average_voltage = 20.676471 2020-10-15 11:33:08 power_api.c:69:check_voltage: target_vol = 20.70, actural_vol = 20.68, check voltage passed. 2020-10-15 11:33:08 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 0, start = 590, freq_step = 5 2020-10-15 11:33:13 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 2, start = 540, freq_step = 5 2020-10-15 11:33:16 driver-btm-api.c:618:set_timeout: freq = 620, percent = 90, hcn = 44236, timeout = 71 2020-10-15 11:33:16 power_api.c:226:set_higher_voltage_raw: higher_voltage_raw = 2040 2020-10-15 11:33:16 power_api.c:332:set_to_higher_voltage_by_steps: Set to voltage raw 2040, step by step. 2020-10-15 11:33:18 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:33:19 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.336317 2020-10-15 11:33:20 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 20.433504 2020-10-15 11:33:20 power_api.c:51:_get_avg_voltage: average_voltage = 20.384910 2020-10-15 11:33:20 power_api.c:69:check_voltage: target_vol = 20.40, actural_vol = 20.38, check voltage passed. 2020-10-15 11:33:20 thread.c:741:create_check_system_status_thread: create thread 2020-10-15 11:33:21 driver-btm-api.c:1919:bitmain_soc_init: Init done! 2020-10-15 11:33:21 driver-btm-api.c:194:set_miner_status: STATUS_INIT 2020-10-15 11:33:25 driver-btm-api.c:194:set_miner_status: STATUS_OKAY 2020-10-15 11:33:26 frequency.c:129:get_ideal_hash_rate_GH: ideal_hash_rate = 49572 2020-10-15 11:33:26 frequency.c:145:get_sale_hash_rate_GH: sale_hash_rate = 49000 2020-10-15 11:33:29 driver-btm-api.c:1292:dhash_chip_send_job: Version num 4 2020-10-15 11:33:38 thread.c:390:check_working_voltage: current PCB min temperature is 28 2020-10-15 11:33:38 thread.c:391:check_working_voltage: current voltage is 2040, recovery to 1940 2020-10-15 11:33:38 power_api.c:304:set_to_working_voltage_by_steps: Set to voltage raw 1940, step by step. 2020-10-15 11:33:43 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:33:45 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 19.364450 2020-10-15 11:33:46 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 19.436780 2020-10-15 11:33:46 power_api.c:51:_get_avg_voltage: average_voltage = 19.400615 2020-10-15 11:33:46 power_api.c:69:check_voltage: target_vol = 19.40, actural_vol = 19.40, check voltage passed. 2020-10-15 12:03:46 thread.c:214:calc_hashrate_avg: avg rate is 50463.77 in 30 mins 2020-10-15 12:03:46 temperature.c:482:temp_statistics_show: pcb temp 33~64 chip temp 53~81 2020-10-15 12:33:48 thread.c:214:calc_hashrate_avg: avg rate is 50487.23 in 30 mins 2020-10-15 12:33:48 temperature.c:482:temp_statistics_show: pcb temp 35~64 chip temp 54~82 2020-10-15 13:03:49 thread.c:214:calc_hashrate_avg: avg rate is 50529.31 in 30 mins 2020-10-15 13:03:49 temperature.c:482:temp_statistics_show: pcb temp 34~62 chip temp 54~79 2020-10-15 13:33:51 thread.c:214:calc_hashrate_avg: avg rate is 50277.34 in 30 mins 2020-10-15 13:33:51 temperature.c:482:temp_statistics_show: pcb temp 34~63 chip temp 54~80
Worker 2 Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203544K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25832K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12792K (cce82000 - cdb00000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 7/2, WL threshold: 4096, image sequence number: 262741923 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 430/137, WL threshold: 4096, image sequence number: 3563076859 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2020-10-15 11:30:38 driver-btm-api.c:632:init_freq_mode: This is scan-user version 2020-10-15 11:30:38 driver-btm-api.c:1815:bitmain_soc_init: opt_multi_version = 1 2020-10-15 11:30:38 driver-btm-api.c:1816:bitmain_soc_init: opt_bitmain_ab = 1 2020-10-15 11:30:38 driver-btm-api.c:1817:bitmain_soc_init: opt_bitmain_work_mode = 0 2020-10-15 11:30:38 driver-btm-api.c:1818:bitmain_soc_init: Miner compile time: Fri Dec 6 13:23:09 CST 2019 type: Antminer S17+ 2020-10-15 11:30:38 driver-btm-api.c:1819:bitmain_soc_init: commit version: c767010 2019-12-04 14:22:30, build by: lol 2019-12-06 13:31:56 2020-10-15 11:30:38 driver-btm-api.c:1655:show_sn: no SN got, please write SN to /nvdata/sn 2020-10-15 11:30:38 fan.c:236:front_fan_power_on: Note: front fan is power on! 2020-10-15 11:30:38 fan.c:248:rear_fan_power_on: Note: rear fan is power on! 2020-10-15 11:30:38 driver-btm-api.c:1110:miner_device_init: Detect 256MB control board of XILINX 2020-10-15 11:30:38 driver-btm-api.c:1058:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2020-10-15 11:30:38 thread.c:731:create_read_nonce_reg_thread: create thread 2020-10-15 11:30:44 driver-btm-api.c:1042:init_miner_version: miner ID : 803c442429e0481c 2020-10-15 11:30:44 driver-btm-api.c:1048:init_miner_version: FPGA Version = 0xB023 2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[0] = 0 2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[1] = 0 2020-10-15 11:30:49 driver-btm-api.c:689:get_product_id: product_id[2] = 0 2020-10-15 11:30:49 driver-btm-api.c:645:_set_project_type: project:0 2020-10-15 11:30:49 driver-btm-api.c:665:_set_project_type: Project type: Antminer S17+ 2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:676:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2020-10-15 11:30:49 driver-btm-api.c:677:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-10-15 11:30:53 driver-btm-api.c:1764:bitmain_board_init: Fan check passed. 2020-10-15 11:30:54 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-10-15 11:30:56 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-10-15 11:30:57 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-10-15 11:31:00 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-10-15 11:31:01 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-10-15 11:31:03 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-10-15 11:31:03 thread.c:726:create_pic_heart_beat_thread: create thread 2020-10-15 11:31:03 power_api.c:208:power_init: Power init: 2020-10-15 11:31:03 power_api.c:209:power_init: current_voltage_raw = 0 2020-10-15 11:31:03 power_api.c:210:power_init: highest_voltage_raw = 2100 2020-10-15 11:31:03 power_api.c:211:power_init: working_voltage_raw = 1950 2020-10-15 11:31:03 power_api.c:212:power_init: higher_voltage_raw = 2040 2020-10-15 11:31:03 driver-btm-api.c:1774:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-10-15 11:31:03 power_api.c:182:power_off: init gpio907 2020-10-15 11:31:35 power_api.c:262:set_to_highest_voltage: Set to voltage raw 2100, one step. 2020-10-15 11:31:37 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:31:38 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 21.119138 2020-10-15 11:31:39 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 21.135375 2020-10-15 11:31:40 power_api.c:38:_get_avg_voltage: chain = 2, voltage = 21.081529 2020-10-15 11:31:40 power_api.c:51:_get_avg_voltage: average_voltage = 21.112014 2020-10-15 11:31:40 power_api.c:69:check_voltage: target_vol = 21.00, actural_vol = 21.11, check voltage passed. 2020-10-15 11:31:40 uart.c:71:set_baud: set fpga_baud to 115200 2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 115200, chip_divider = 26 2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 115200, chip_divider = 26 2020-10-15 11:31:40 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[2]: chip baud = 115200, chip_divider = 26 2020-10-15 11:31:51 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0 2020-10-15 11:32:02 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0 2020-10-15 11:32:13 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0 2020-10-15 11:32:24 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1 2020-10-15 11:32:34 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2 2020-10-15 11:32:34 driver-btm-api.c:1010:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2 2020-10-15 11:32:35 driver-btm-api.c:1012:check_asic_number: Chain 2 voltage: an0 = 2.793548, an2 2.803226, an6 2.535484. 2020-10-15 11:32:42 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003 2020-10-15 11:32:42 driver-btm-api.c:352:set_order_clock: chain[0]: set order clock, stragegy 3 2020-10-15 11:32:42 driver-btm-api.c:352:set_order_clock: chain[1]: set order clock, stragegy 3 2020-10-15 11:32:42 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2020-10-15 11:32:42 voltage[0] = 1940 2020-10-15 11:32:42 voltage[1] = 1940 2020-10-15 11:32:42 power_api.c:220:set_working_voltage_raw: working_voltage_raw = 1940 2020-10-15 11:32:43 temperature.c:314:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218 2020-10-15 11:32:45 temperature.c:314:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218 2020-10-15 11:32:45 uart.c:71:set_baud: set fpga_baud to 12000000 2020-10-15 11:32:45 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[0]: chip baud = 12000000, chip_divider = 3 2020-10-15 11:32:45 driver-hash-chip.c:245:dhash_chip_set_baud_v2: chain[1]: chip baud = 12000000, chip_divider = 3 2020-10-15 11:32:46 driver-btm-api.c:241:check_bringup_temp: Bring up temperature is 16 2020-10-15 11:32:46 thread.c:746:create_check_miner_status_thread: create thread 2020-10-15 11:32:46 thread.c:736:create_show_miner_status_thread: create thread 2020-10-15 11:32:46 thread.c:721:create_temperature_monitor_thread: create thread 2020-10-15 11:32:46 freq_tuning.c:145:freq_tuning_get_max_freq: Max freq of tuning is 650 2020-10-15 11:32:46 frequency.c:770:inc_freq_with_fixed_vco: chain = 255, freq = 560, is_higher_voltage = true 2020-10-15 11:32:54 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2090, step by step. 2020-10-15 11:32:56 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:32:57 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.924049 2020-10-15 11:32:58 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.963010 2020-10-15 11:32:58 power_api.c:51:_get_avg_voltage: average_voltage = 20.943530 2020-10-15 11:32:58 power_api.c:69:check_voltage: target_vol = 20.90, actural_vol = 20.94, check voltage passed. 2020-10-15 11:32:59 power_api.c:346:set_to_voltage_by_steps: Set to voltage raw 2070, step by step. 2020-10-15 11:33:00 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:33:01 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.731644 2020-10-15 11:33:02 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.769132 2020-10-15 11:33:02 power_api.c:51:_get_avg_voltage: average_voltage = 20.750388 2020-10-15 11:33:02 power_api.c:69:check_voltage: target_vol = 20.70, actural_vol = 20.75, check voltage passed. 2020-10-15 11:33:02 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 0, start = 560, freq_step = 5 2020-10-15 11:33:09 frequency.c:840:inc_asic_diff_freq_by_steps: chain = 1, start = 560, freq_step = 5 2020-10-15 11:33:13 driver-btm-api.c:618:set_timeout: freq = 610, percent = 90, hcn = 44236, timeout = 72 2020-10-15 11:33:13 power_api.c:226:set_higher_voltage_raw: higher_voltage_raw = 2040 2020-10-15 11:33:13 power_api.c:332:set_to_higher_voltage_by_steps: Set to voltage raw 2040, step by step. 2020-10-15 11:33:15 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:33:17 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 20.443037 2020-10-15 11:33:18 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 20.454081 2020-10-15 11:33:18 power_api.c:51:_get_avg_voltage: average_voltage = 20.448559 2020-10-15 11:33:18 power_api.c:69:check_voltage: target_vol = 20.40, actural_vol = 20.45, check voltage passed. 2020-10-15 11:33:18 thread.c:741:create_check_system_status_thread: create thread 2020-10-15 11:33:18 driver-btm-api.c:1919:bitmain_soc_init: Init done! 2020-10-15 11:33:18 driver-btm-api.c:194:set_miner_status: STATUS_INIT 2020-10-15 11:33:23 driver-btm-api.c:194:set_miner_status: STATUS_OKAY 2020-10-15 11:33:24 frequency.c:129:get_ideal_hash_rate_GH: ideal_hash_rate = 49572 2020-10-15 11:33:24 frequency.c:145:get_sale_hash_rate_GH: sale_hash_rate = 49000 2020-10-15 11:33:29 driver-btm-api.c:1292:dhash_chip_send_job: Version num 4 2020-10-15 11:33:33 thread.c:390:check_working_voltage: current PCB min temperature is 30 2020-10-15 11:33:33 thread.c:391:check_working_voltage: current voltage is 2040, recovery to 1940 2020-10-15 11:33:33 power_api.c:304:set_to_working_voltage_by_steps: Set to voltage raw 1940, step by step. 2020-10-15 11:33:38 power_api.c:83:check_voltage_multi: retry time: 0 2020-10-15 11:33:39 power_api.c:38:_get_avg_voltage: chain = 0, voltage = 19.481012 2020-10-15 11:33:40 power_api.c:38:_get_avg_voltage: chain = 1, voltage = 19.484694 2020-10-15 11:33:40 power_api.c:51:_get_avg_voltage: average_voltage = 19.482853 2020-10-15 11:33:40 power_api.c:69:check_voltage: target_vol = 19.40, actural_vol = 19.48, check voltage passed. 2020-10-15 12:03:40 thread.c:214:calc_hashrate_avg: avg rate is 50388.11 in 30 mins 2020-10-15 12:03:40 temperature.c:482:temp_statistics_show: pcb temp 33~64 chip temp 53~79 2020-10-15 12:33:42 thread.c:214:calc_hashrate_avg: avg rate is 50508.59 in 30 mins 2020-10-15 12:33:42 temperature.c:482:temp_statistics_show: pcb temp 36~64 chip temp 56~80 2020-10-15 13:03:43 thread.c:214:calc_hashrate_avg: avg rate is 50827.84 in 30 mins 2020-10-15 13:03:43 temperature.c:482:temp_statistics_show: pcb temp 35~64 chip temp 56~79 2020-10-15 13:33:44 thread.c:214:calc_hashrate_avg: avg rate is 50653.24 in 30 mins 2020-10-15 13:33:44 temperature.c:482:temp_statistics_show: pcb temp 36~65 chip temp 57~81
Continued in next post.
|
|
|
|
mtnrotary
Newbie
Offline
Activity: 7
Merit: 0
|
|
December 21, 2020, 06:23:36 PM Last edit: December 22, 2020, 11:23:29 PM by frodocooper |
|
Worker 3 Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12904K (cce67000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAEAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 13/4, WL threshold: 4096, image sequence number: 262741923 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 347/120, WL threshold: 4096, image sequence number: 3563076859 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID A21581E4-693A-4BBF-A66A-FCE5ACD2EF7F, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized macb e000b000.ethernet eth0: link down macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) 2020-10-14 20:34:55 driver-btm-api.c:779:init_freq_mode: This is scan-user version 2020-10-14 20:34:55 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1 2020-10-14 20:34:55 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1 2020-10-14 20:34:55 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0 2020-10-14 20:34:55 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+ 2020-10-14 20:34:55 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21 2020-10-14 20:34:55 driver-btm-api.c:2083:show_sn: len:16, 8070642a18c0885c 2020-10-14 20:34:55 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1 2020-10-14 20:34:55 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1 2020-10-14 20:34:55 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 8070642a18c0885c 2020-10-14 20:34:55 fan.c:284:front_fan_power_on: Note: front fan is power on! 2020-10-14 20:34:55 fan.c:296:rear_fan_power_on: Note: rear fan is power on! 2020-10-14 20:34:55 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX 2020-10-14 20:34:55 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2020-10-14 20:35:01 driver-btm-api.c:1239:init_miner_version: miner ID : 8070642a18c0885c 2020-10-14 20:35:01 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023 2020-10-14 20:35:06 driver-btm-api.c:837:get_product_id: product_id[0] = 0 2020-10-14 20:35:06 driver-btm-api.c:837:get_product_id: product_id[1] = 0 2020-10-14 20:35:06 driver-btm-api.c:837:get_product_id: product_id[2] = 0 2020-10-14 20:35:06 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled 2020-10-14 20:35:06 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data. 2020-10-14 20:35:06 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0 2020-10-14 20:35:06 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0 2020-10-14 20:35:06 thread.c:1363:create_read_nonce_reg_thread: create thread 2020-10-14 20:35:12 driver-btm-api.c:1239:init_miner_version: miner ID : 8070642a18c0885c 2020-10-14 20:35:12 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023 2020-10-14 20:35:18 driver-btm-api.c:837:get_product_id: product_id[0] = 0 2020-10-14 20:35:18 driver-btm-api.c:837:get_product_id: product_id[1] = 0 2020-10-14 20:35:18 driver-btm-api.c:837:get_product_id: product_id[2] = 0 2020-10-14 20:35:18 driver-btm-api.c:792:_set_project_type: project:0 2020-10-14 20:35:18 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+ 2020-10-14 20:35:18 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2020-10-14 20:35:18 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2020-10-14 20:35:18 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2020-10-14 20:35:18 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2020-10-14 20:35:18 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2020-10-14 20:35:18 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2020-10-14 20:35:18 driver-btm-api.c:2372:bitmain_board_init: Fan check passed. 2020-10-14 20:35:19 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2020-10-14 20:35:21 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2020-10-14 20:35:22 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2020-10-14 20:35:24 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2020-10-14 20:35:25 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2020-10-14 20:35:27 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2020-10-14 20:35:27 thread.c:1358:create_pic_heart_beat_thread: create thread 2020-10-14 20:35:27 power_api.c:213:power_init: Power init: 2020-10-14 20:35:27 power_api.c:214:power_init: current_voltage_raw = 0 2020-10-14 20:35:27 power_api.c:215:power_init: highest_voltage_raw = 2100 2020-10-14 20:35:27 power_api.c:216:power_init: working_voltage_raw = 1950 2020-10-14 20:35:27 power_api.c:217:power_init: higher_voltage_raw = 2040 2020-10-14 20:35:27 power_api.c:218:power_init: check_asic_voltage_raw = 2100 2020-10-14 20:35:27 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2020-10-14 20:35:27 power_api.c:186:power_off: init gpio907 2020-10-14 20:35:59 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step. 2020-10-14 20:36:25 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:36:26 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.175572 2020-10-14 20:36:27 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.027955 2020-10-14 20:36:28 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.003812 2020-10-14 20:36:28 power_api.c:53:_get_avg_voltage: average_voltage = 21.069113 2020-10-14 20:36:28 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.07, check voltage passed. 2020-10-14 20:36:28 uart.c:72:set_baud: set fpga_baud to 115200 2020-10-14 20:36:39 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0 2020-10-14 20:36:50 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1 2020-10-14 20:37:01 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2 2020-10-14 20:37:01 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-10-14 20:37:09 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3 2020-10-14 20:37:09 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050 2020-10-14 20:37:09 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step. 2020-10-14 20:37:13 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:37:15 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.641678 2020-10-14 20:37:16 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.522900 2020-10-14 20:37:17 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.520966 2020-10-14 20:37:17 power_api.c:53:_get_avg_voltage: average_voltage = 20.561848 2020-10-14 20:37:17 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.56, check voltage passed. chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-10-14 20:37:26 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 4 2020-10-14 20:37:26 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000 2020-10-14 20:37:26 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step. 2020-10-14 20:37:29 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:37:30 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.134689 2020-10-14 20:37:31 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.039440 2020-10-14 20:37:32 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.038120 2020-10-14 20:37:32 power_api.c:53:_get_avg_voltage: average_voltage = 20.070750 2020-10-14 20:37:32 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.07, check voltage passed. chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-10-14 20:37:41 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 5 2020-10-14 20:37:41 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 2020-10-14 20:37:41 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step. 2020-10-14 20:37:46 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:37:47 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.124524 2020-10-14 20:37:48 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.030534 2020-10-14 20:37:50 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.003812 2020-10-14 20:37:50 power_api.c:53:_get_avg_voltage: average_voltage = 21.052957 2020-10-14 20:37:50 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.05, check voltage passed. 2020-10-14 20:37:50 driver-btm-api.c:1193:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0 2020-10-14 20:37:51 driver-btm-api.c:1195:check_asic_number: Chain 0 voltage: an0 = 2.825806, an2 2.822581, an6 2.538710. 2020-10-14 20:38:02 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0 2020-10-14 20:38:13 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1 2020-10-14 20:38:24 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2 2020-10-14 20:38:24 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-10-14 20:38:33 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3 2020-10-14 20:38:33 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050 2020-10-14 20:38:33 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step. 2020-10-14 20:38:36 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:38:37 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.520966 2020-10-14 20:38:38 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.520966 2020-10-14 20:38:38 power_api.c:53:_get_avg_voltage: average_voltage = 20.520966 2020-10-14 20:38:38 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.52, check voltage passed. chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-10-14 20:38:47 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4 2020-10-14 20:38:47 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000 2020-10-14 20:38:47 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step. 2020-10-14 20:38:50 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:38:51 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.013978 2020-10-14 20:38:52 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.013978 2020-10-14 20:38:52 power_api.c:53:_get_avg_voltage: average_voltage = 20.013978 2020-10-14 20:38:52 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.01, check voltage passed. chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-10-14 20:39:01 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5 2020-10-14 20:39:01 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 2020-10-14 20:39:01 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step. 2020-10-14 20:39:06 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:39:07 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.003812 2020-10-14 20:39:08 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.003812 2020-10-14 20:39:08 power_api.c:53:_get_avg_voltage: average_voltage = 21.003812 2020-10-14 20:39:08 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.00, check voltage passed. 2020-10-14 20:39:08 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1 2020-10-14 20:39:09 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.812903, an2 2.806452, an6 2.535484. 2020-10-14 20:39:21 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0 2020-10-14 20:39:32 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 8 asic, times 1 2020-10-14 20:39:43 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 2 2020-10-14 20:39:43 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-10-14 20:39:51 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3 2020-10-14 20:39:51 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050 2020-10-14 20:39:51 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step. 2020-10-14 20:39:55 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:39:56 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.494923 2020-10-14 20:39:56 power_api.c:53:_get_avg_voltage: average_voltage = 20.494923 2020-10-14 20:39:56 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.49, check voltage passed. chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-10-14 20:40:05 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 4 2020-10-14 20:40:05 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000 2020-10-14 20:40:05 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step. 2020-10-14 20:40:08 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:40:10 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.012689 2020-10-14 20:40:10 power_api.c:53:_get_avg_voltage: average_voltage = 20.012689 2020-10-14 20:40:10 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.01, check voltage passed. chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2020-10-14 20:40:18 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 5 2020-10-14 20:40:18 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 2020-10-14 20:40:18 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step. 2020-10-14 20:40:23 power_api.c:85:check_voltage_multi: retry time: 0 2020-10-14 20:40:25 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.977156 2020-10-14 20:40:25 power_api.c:53:_get_avg_voltage: average_voltage = 20.977156 2020-10-14 20:40:25 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.98, check voltage passed. 2020-10-14 20:40:25 driver-btm-api.c:1193:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2 2020-10-14 20:40:26 driver-btm-api.c:1195:check_asic_number: Chain 2 voltage: an0 = 2.819355, an2 2.806452, an6 2.541935. 2020-10-14 20:40:27 driver-btm-api.c:222:set_miner_status: ERROR_SOC_INIT 2020-10-14 20:40:27 driver-btm-api.c:156:stop_mining: stop mining: soc init failed! 2020-10-14 20:40:27 thread.c:1403:cancel_read_nonce_reg_thread: cancel thread 2020-10-14 20:40:27 driver-btm-api.c:141:killall_hashboard: ****power off hashboard****
|
|
|
|
favebook
|
|
December 21, 2020, 08:37:47 PM Last edit: December 22, 2020, 11:23:58 PM by frodocooper |
|
What helped me is to use other miner to heat up the one that I am about to boot. After booting it, I move away my "heater" and it doesn't overheat but at least it mines. I have this problem with both S17Pro and S17+. When not heated S17Pro mines with only one or sometimes no hashboards at all, if I heat it up with my Z11, it mines with 2 or 3 hashboards normally. When not heated S17+ does not mine at all, if I heat it, it mines with one or sometimes two hashboards (third hashboard has loose heatsink so there is no way this method helps it ).
|
|
|
|
mikeywith
Legendary
Offline
Activity: 2226
Merit: 6367
be constructive or S.T.F.U
|
|
December 21, 2020, 10:29:16 PM Last edit: December 22, 2020, 11:24:25 PM by frodocooper |
|
For the first miner: 2020-10-15 11:31:51 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0 2020-10-15 11:32:02 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0 2020-10-15 11:32:37 driver-btm-api.c:982:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
I would just mine with 2 hash boards rather than sending the gear back to China, the process will take forever and someone mentioned that bitmain couldn't send them their gears back and offered to buy their gears at a very cheap price, so sending them your gears back is a huge risk. for the second worker, did you try a different PSU?
|
|
|
|
wndsnb
|
|
December 22, 2020, 03:52:21 AM Last edit: December 22, 2020, 11:24:42 PM by frodocooper |
|
First two miners are finding 0 chips on one hashboard at startup. Not something that is generally fixable without getting the hashboard on a test fixture and tracking down the issue. As mikeywith said, your best option is probably to try to just run with 2 hashboards each. If you can find a repair shop reasonably close you could consider sending them to get repaired, but by the time you pay shipping both ways and repair of 2 hashboards it would probably be > $500. Sending them back to Bitmain is not a good option in my opinion. I RMAed a S17pro under warranty to Bitmain's repair facility in California in May and still don't have it back.
As for the 3rd one, it doesn't see any chips on bootup from any hashboard. Not likely that all 3 hashboards decided to die at the same time. So, like mikeywith suggested, you should see if your host will swap a PSU to see if it runs with a good one. If that doesn't do it, you might see if they'll swap the control board out.
|
Have some dead Bitmain 17 series hashboards or full miners? I'll buy them ... send me a PM with what you have and I'll make you an offer!
|
|
|
spyroslo
Newbie
Offline
Activity: 4
Merit: 0
|
|
January 02, 2021, 04:37:06 PM Last edit: January 02, 2021, 11:10:53 PM by frodocooper |
|
Hi and hapy new year i have two s17_56h in one i take erros and hi does not start Any ideas ....? Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203612K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25764K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12724K (cce94000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 25/10, WL threshold: 4096, image sequence number: 2419912869 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 1303F5C2-F3EF-4059-9B98-C469B28B1788, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 443/125, WL threshold: 4096, image sequence number: 2324953515 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 8C5051EC-2BDF-4773-B69A-558999E9CEC7, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xab013 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2021-01-02 16:31:17 driver-btm-api.c:542:init_freq_mode: This is scan-user version 2021-01-02 16:31:17 driver-btm-api.c:1877:bitmain_soc_init: opt_multi_version = 1 2021-01-02 16:31:17 driver-btm-api.c:1878:bitmain_soc_init: opt_bitmain_ab = 1 2021-01-02 16:31:17 driver-btm-api.c:1879:bitmain_soc_init: opt_bitmain_work_mode = 2 2021-01-02 16:31:17 driver-btm-api.c:1880:bitmain_soc_init: Miner compile time: Mon Apr 27 13:23:07 CST 2020 type: Antminer S17 2021-01-02 16:31:17 driver-btm-api.c:1881:bitmain_soc_init: commit version: d22f356 2020-04-24 18:30:49, build by: lol 2020-04-27 13:30:25 2021-01-02 16:31:17 driver-btm-api.c:1691:show_sn: no SN got, please write SN to /nvdata/sn 2021-01-02 16:31:17 driver-btm-api.c:1040:miner_device_init: Detect 256MB control board of XILINX 2021-01-02 16:31:17 driver-btm-api.c:988:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2021-01-02 16:31:17 thread.c:783:create_read_nonce_reg_thread: create thread 2021-01-02 16:31:23 driver-btm-api.c:972:init_miner_version: miner ID : 80680c0e7510481c 2021-01-02 16:31:23 driver-btm-api.c:978:init_miner_version: FPGA Version = 0xB013 2021-01-02 16:31:29 driver-btm-api.c:616:get_product_id: product_id[0] = 0 2021-01-02 16:31:29 driver-btm-api.c:616:get_product_id: product_id[1] = 0 2021-01-02 16:31:29 driver-btm-api.c:616:get_product_id: product_id[2] = 0 2021-01-02 16:31:29 driver-btm-api.c:560:_set_project_type: project:1 2021-01-02 16:31:29 driver-btm-api.c:585:_set_project_type: Project type: Antminer S17 2021-01-02 16:31:29 driver-btm-api.c:596:dump_pcb_bom_version: Chain [0] PCB Version: 0x0101 2021-01-02 16:31:29 driver-btm-api.c:597:dump_pcb_bom_version: Chain [0] BOM Version: 0x0103 2021-01-02 16:31:29 driver-btm-api.c:596:dump_pcb_bom_version: Chain [1] PCB Version: 0x0101 2021-01-02 16:31:29 driver-btm-api.c:597:dump_pcb_bom_version: Chain [1] BOM Version: 0x0103 2021-01-02 16:31:29 driver-btm-api.c:596:dump_pcb_bom_version: Chain [2] PCB Version: 0x0101 2021-01-02 16:31:29 driver-btm-api.c:597:dump_pcb_bom_version: Chain [2] BOM Version: 0x0103 2021-01-02 16:31:30 driver-btm-api.c:1802:bitmain_board_init: Fan check passed. 2021-01-02 16:31:38 driver-btm-api.c:321:init_pic: Chain[0] PIC init failed! 2021-01-02 16:31:38 driver-btm-api.c:198:set_miner_status: ERROR_PIC_LOST 2021-01-02 16:31:38 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2021-01-02 16:31:54 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0xff 2021-01-02 16:31:55 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2021-01-02 16:31:57 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9 2021-01-02 16:32:05 driver-btm-api.c:321:init_pic: Chain[2] PIC init failed! 2021-01-02 16:32:05 driver-btm-api.c:198:set_miner_status: ERROR_PIC_LOST 2021-01-02 16:32:05 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2021-01-02 16:32:22 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xff 2021-01-02 16:32:22 thread.c:778:create_pic_heart_beat_thread: create thread 2021-01-02 16:32:22 power_api.c:207:power_init: Power init: 2021-01-02 16:32:22 power_api.c:208:power_init: current_voltage_raw = 0 2021-01-02 16:32:22 power_api.c:209:power_init: highest_voltage_raw = 2100 2021-01-02 16:32:22 power_api.c:210:power_init: working_voltage_raw = 1830 2021-01-02 16:32:22 power_api.c:211:power_init: higher_voltage_raw = 1950 2021-01-02 16:32:22 driver-btm-api.c:1812:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2021-01-02 16:32:54 power_api.c:251:set_to_highest_voltage: Set to voltage raw 2100, one step. 2021-01-02 16:32:56 power_api.c:87:check_voltage_multi: retry time: 0 2021-01-02 16:32:58 power_api.c:37:_get_avg_voltage: chain = 1, voltage = 21.455156 2021-01-02 16:32:58 power_api.c:50:_get_avg_voltage: average_voltage = 21.455156 2021-01-02 16:32:58 power_api.c:68:check_voltage: target_vol = 21.00, actural_vol = 21.46, check voltage passed. 2021-01-02 16:32:58 uart.c:71:set_baud: set fpga_baud to 115200 2021-01-02 16:33:09 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 40 asic, times 0 2021-01-02 16:33:20 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 40 asic, times 1 2021-01-02 16:33:31 driver-btm-api.c:915:check_asic_number_with_power_on: Chain[1]: find 40 asic, times 2 2021-01-02 16:33:31 driver-btm-api.c:942:check_asic_number: Chain 1 only find 40 asic, will power off hash board 1 2021-01-02 16:33:32 driver-btm-api.c:198:set_miner_status: ERROR_SOC_INIT 2021-01-02 16:33:32 driver-btm-api.c:139:stop_mining: stop mining: soc init failed! 2021-01-02 16:33:32 thread.c:828:cancel_read_nonce_reg_thread: cancel thread 2021-01-02 16:33:32 driver-btm-api.c:124:killall_hashboard: ****power off hashboard****
|
|
|
|
|