BlackHatCoiner
Legendary
Offline
Activity: 1624
Merit: 7957
Bitcoin is a royal fork
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:08:01 PM |
|
Please don't edit your posts frequently, because I don't know where/if I should respond. So what do i do now? Thomas' key is probably imported, even though it didn't prompt you this "certify" message. What does it show you in All Certificates (main form of Kleopatra)? You should see a "Thomas Voegtlin". Right click to it and click "Certify". Whether you follow DireWolf's instructions or the YouTuber's, you're going to have it verified.
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:08:27 PM |
|
I closed kleoptra and reopened it. it displays the same thing before I closed it Name email user id valid from valid until key-id Thomas Voegtlin (https//electrum.org) thomasv@electrum.org not certified 6/5/2011 xxxxxxxxxxxx The key id contains numbers and letters but i just typed xxxxxxxxx. I assume I need to right click on the whole thing and delete it? Then click import and click on the ThomasV.asc file again? Because if I just import the same file again... it would show like two of these files?
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:12:44 PM |
|
What I typed above is under imported certificates. If I click on All certificates, its the same thing there... EXCEPT you can't see the full words not certified and its like not cer... and you don't see the full key-id... unless you stretch it?
If I rlght click on Thomas Voegitlin under all certificates or imported certificates, yes i can click on certify.
Do i do this under imported certificates or all certificates or it doesn't matter?
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:16:27 PM |
|
Okay I am on imported certificates and right click certify.
Then i get message to first create an OpenPGP certificate for yourself. Do you wish to create one now? I click yes.
I still need to enter a name and email right? Does the email need to be an email I use and have access to? It shows optional but I can put a fake name but make sure the email is an email i have access to? I don't want to use my primary email for this but should I? I do have a few other emails. So use that?
|
|
|
|
BlackHatCoiner
Legendary
Offline
Activity: 1624
Merit: 7957
Bitcoin is a royal fork
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:31:28 PM |
|
Does the email need to be an email I use and have access to? No, you can just use any combination, you won't be asked to confirm it. Remember, you just need to verify the authenticity of a file. Not, to communicate using PGP. Have you managed to certify Thomas or not yet? This is supposed to be simple, I don't understand what's the hassle.
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:33:59 PM |
|
This makes zero sense. After I entered my name and put in a fake email address.. i just put email@email.com then clicked next. It showed a key pair i created? Why does it do that? I wrote it down on paper anyway. Then I click next and it shows Certify Certificate - Kleoptra Fingerprint Only the fingerprint clearly identifieds the key and its owner. Certify with - Shows check mark with my name - email@email.com (certified, created today's date) You can click on the dropdown menu on this but its only option You can't even click on certify. Its that or cancel. There is also advanced and when I click it it opens Certify for everyone to see (exportable) unchecked Expiration unchecked Certify as trusted introducer unchecked What in the world is this?
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:35:37 PM |
|
Does the email need to be an email I use and have access to? No, you can just use any combination, you won't be asked to confirm it. Remember, you just need to verify the authenticity of a file. Not, to communicate using PGP. Have you managed to certify Thomas or not yet? This is supposed to be simple, I don't understand what's the hassle. I know its supposed to be simple. Just look at my post above to see what shows up in my next page after i enter a name just fake email address. It gives me a key pair long key. Then i just click next and now im in a page where I never seen before in any instruction.
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:40:36 PM |
|
I right clicked on the Thomas Voegtlin and just deleted it. Then I clicked import and imported the same ThomasV.asc file. Now I see what I believe I'm suppose to see Certify Certificate: Thomas Voegtlin ( https://electrum.org) - kleopatra Finger print 6694 D8DE 7BE8 EE56 31BE D950 2BD5 824B 7F94 70E6 Only the fingerprint clearly identifies the key and its owner Certify with white check mark with green background my name- my fake email Then you see the three Thomas with check mark on each three of these. Click certify?
|
|
|
|
BlackHatCoiner
Legendary
Offline
Activity: 1624
Merit: 7957
Bitcoin is a royal fork
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:42:55 PM |
|
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:46:05 PM |
|
Shows certificate successful.
I now see the user id as certified. So that is done correctly right?
Now when i click on my certificates, I also see my name and email that i created right above Thomas. So there is suppose to be my account and Thomas account on all certificates now?
Also, im confused why it shows
All certificates Imported Certificates Imported Certificates
Why is there an extra imported certificates tab? IF you click on either of them, its the same exact thing?
How come I never got to the message of The software will check the integrity of the .exe file and compare it to the signature file. If the signature matches the .exe file you'll see a window like this pop up with green text: Also when am i suppose to click on signatures next to windows installer? You said I have to do this in the end.
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:52:06 PM |
|
I just saw a message of shows certificate successful. But it doesn't look anything like the pictures in direwolf photos with a popup with green text. There was nothing like this. It literally shows a small message in a box that said shows certificate successful and that was it...
Also at no point did it even ask me to create a passphrase to protect my key...
|
|
|
|
khaled0111
Legendary
Online
Activity: 2632
Merit: 2978
Top Crypto Casino
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 08:59:23 PM |
|
^^ Because you didn't verify the electrum file yet. As I suggested in PMs, right click on the Electrum file (you downloaded from electrum.org), you should see more gpgex options -> verify, click on it. After Kleopatra finishes verifying the file, it should show "valid signature" and that's it!
If it shows a warning saying simething like "This key is not certified with a trusted signature", just ignore it since the fingerprint is correct.
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 09:04:36 PM Last edit: February 25, 2022, 09:44:52 PM by Mr. Big |
|
^^ Because you didn't verify the electrum file yet. As I suggested in PMs, right click on the Electrum file (you downloaded from electrum.org), you should see more gpgex options -> verify, click on it. After Kleopatra finishes verifying the file, it should show "valid signature" and that's it!
If it shows a warning saying simething like "This key is not certified with a trusted signature", just ignore it since the fingerprint is correct.
The electrum I file I downloaded is called electrum-4.1.5-setup Is that correct? I clicked on more gpgex options and verify. Do i just click decrypt/verify as is? Or do i need to put a check mark to input file is a detached signature? If you do that, the singed data line opens up where you can type something to it.
At the bottom theres a check mark on Create all output files in a single folder output folder: c:/uers/myname/downloads
|
|
|
|
khaled0111
Legendary
Online
Activity: 2632
Merit: 2978
Top Crypto Casino
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 09:14:59 PM |
|
The electrum I file I downloaded is called electrum-4.1.5-setup Is that correct?
Yes, this is it. Do i just click decrypt/verify as is?
No, click on verify not decrypt/verify. What do you get?
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 09:26:19 PM |
|
The electrum I file I downloaded is called electrum-4.1.5-setup Is that correct?
Yes, this is it. Do i just click decrypt/verify as is?
No, click on verify not decrypt/verify. What do you get? I got what i posted above...
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 09:30:28 PM Last edit: February 25, 2022, 10:20:39 PM by Mr. Big |
|
When I right click on the electrum downloaded file and verify... i get a new box that opens
Decrypt/Verify Files - Kleopatra
Choose operations to be performed Here you can check and, if needed, override the operations kleopatra detected for the input given
Input file: c:/users/myname/downloads/electrum-4.1.5-setup.exe
No check mark on Input files is a detached signature
No check mark on Input file is an archive: unpack with
Check mark on Create all output files in a single folder
Output folder: c:/users/myname/downloads
The only thing i can do on this page is either click on Decrypt/Verify... or cancel
Or
Click on those two input files and make it a check mark...
khaled- If you are telling me what I typed below is not what is suppose to show after you right click electrum download setup file and click verify... then I don't know what to say.
What has me frustrated is when you have people say verifying electrum should not take more than a few minutes, yet the instructions are not even as clear as possible... and three different instruction tutorial shows literally three different ways to verify electrum, that is a problem.
Multiple times already after clicking something or doing something as in the instructions, I get some weird or strange message pop up that I never seen before etc. I can't believe there isn't an updated video on youtube where someone shows how this is done and you could clearly follow step by step how to do all of this. That youtube video that I had looked at, even if i followed that video step by step, I would wonder how come it didn't ask me to create a passphrase like in the video after putting in name and a password.
|
|
|
|
khaled0111
Legendary
Online
Activity: 2632
Merit: 2978
Top Crypto Casino
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 09:53:20 PM |
|
Save electrum installer (.exe) and the signature file (.asc) on the same directory and make sure they have the same name (electrum-4.1.5-setup.exe and electrum-4.1.5-setup.asc). Try again and see if this solves the problem. The proper way to solve this is explained here, though. But, just for the moment, try what I suggested so we don't complicate things any further.
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 09:59:04 PM |
|
Save electrum installer (.exe) and the signature file (.asc) on the same directory and make sure they have the same name (electrum-4.1.5-setup.exe and electrum-4.1.5-setup.asc). Try again and see if this solves the problem. The proper way to solve this is explained here, though. But, just for the moment, try what I suggested so we don't complicate things any further. In what part of direwolf instructions had you download electrum installer exe? There was zero mention of this. All it said was download electrum so I clicked in the installer and then it downloaded. You are telling me I'm not suppose to click on windows installer and click on standalone executable instead? Anytime i ever downloaded electrum, I always clicked on windows installer. I never even heard of anyone clicking on standalone executable to download electrum since the preferred way is always windows installer. When you say save electrum installer exe and the signature file asc files on the same directory, can you explain it in a way where someone that isn't that tech savy could understand? Do i just left it and thats all or i need right click it and save link as? I had wondered why in the youtube video and in the other instruction they mentioned these two files... since I thought how do you even get an exe file.
|
|
|
|
n0nce
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 10:24:10 PM |
|
~
What is this dude? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2Fpdfx5Wrz%2Fimage.png&t=665&c=Goz7tNEXWaH-NA) What's that? ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fi.postimg.cc%2F2SBLJZ9Y%2Fimage.png&t=665&c=DavR9lySdQIFVQ) Look at it, yes, look at it! Whitespace! I screenshotted it from your post. Tons of it! Yes, I'm wasting someone's disk space as well as your bandwidth - to prove my point! It's annoying! Why do you have to smash that enter button 42 times after every 2 words? It's annoying and unnecessary. Some whitespace, sure, better than a wall of text. But you're overdoing it!
|
|
|
|
jerry0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
February 25, 2022, 10:37:47 PM Last edit: February 27, 2022, 10:09:12 AM by mprep |
|
I'm frustrated man. For something that should take few minutes only from what others say, this isn't even simple at all. I literally followed direwolf instructions here and multiples times i got stuck. I mentioned there were two other guides... one was a youtube guide... yet the way they did it is different. The other guide said to only check kleopatra only and uncheck the other two things. Then look at this other guide. https://coinguides.org/verify-electrum-signature/This one has you download the signature file early on. Yet none of the other guides even tell you to do this early or at all. I am frustrated there is no instruction guide where you could follow it step by step and everything would be a breeze. When I followed direwolf guide, towards the middle/end of it, I get stuck and khaled tells me you suppose to have the electrum exe file and the electrum asg file after he ask me to right click electrum and verify and he tells me now i should see if its verified or not. I tell him i see something completely different. Thats when I wondered.. where in the instructions did it say to download electrum file by clicking on the standalone executable in direwolfs guide? Anyone that is told to download a file would click on windows installer. I am just frustrated how come there isn't simple easy to follow instructions for something as important as verifying electrum. I have been using computer for many years on windows. But anything I download I just use it. So im not like a computer newbie.
What I don't get is why steps aren't simplified easier. Imagine something like this. Go to electrum.org and download it. If you have windows, click on windows installer or standalone executable. Leave no doubt what download means. Go to Gpg4win website... of course put that the exact website link... then click on download Obviously having pictures would be helpful as well. But let say I figured out how to do verify electrum. If I were to create a thread on verifying electrum... the steps i write down in a guide would be as clear as possible to anyone on this forum. I would leave almost zero doubt to someone... who would go... i'm confused or I'm stuck etc. I cannot believe the guide to verify electrum is this complicated when people say it should take minutes. [moderator's note: consecutive posts merged]
|
|
|
|
|