[ANN/WTS]3rd Halving Coldkey - Copper variant avail - Gold/Silver/Copper variant

[ChiBitCTy]

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:


https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing.  ColdKey continues to kill it with each release!

[MoparMiningLLC]

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:


https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing.  ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

[anonymousminer]

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:


https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing.  ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey.  Lol 

[MoparMiningLLC]

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:


https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing.  ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey.  Lol 

ok - I have 3 of them - i did not know if this edition was sized differently - I hate to assume anything. you know what they say about assumption?

[hulla]

Good team will only implement an awesome stuff  and it will be an amazing gift for my two boys.
👍

[krogoth]

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:

https://www.ultrapro.com/product_info.php?products_id=8740

  Found same type on ebay for 5.98 with free shipping...exception is the screws show as per pic shown.

  Will take a pic and post once item arrives.

[axax]

These are impressive, what material are they made of?

[anonymousminer]

These are impressive, what material are they made of?

https://bitcointalk.org/index.php?topic=5130905.msg50565285#msg50565285

[MoparMiningLLC]

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:


https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing.  ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey.  Lol 

ok I am going to use my laser and some acrylic and make a case that will hold two coldkeys right next to each other as pictured - question is, how many others would want one? I hope to have one done this weekend for pictures.

[krogothmanhattan]

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:


https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing.  ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey.  Lol 

ok I am going to use my laser and some acrylic and make a case that will hold two coldkeys right next to each other as pictured - question is, how many others would want one? I hope to have one done this weekend for pictures.

  I probably would...would like to see one first

[MoparMiningLLC]

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:


https://www.ultrapro.com/product_info.php?products_id=8740

It would be nice to find a case without such a gap in the middle, but I don't think that's going to be possible if you want a nice hard plastic with out any contaminants that could fuck up the cards ( I'm on the hunt though)

Boys involved with these cards, yoggy...well done! These things are amazing.  ColdKey continues to kill it with each release!

can someone give me the exact dimensions of the two cards side by side? I might have something that will work but I will need the dimensions to know for sure.

The same size as every other coldkey.  Lol  

ok I am going to use my laser and some acrylic and make a case that will hold two coldkeys right next to each other as pictured - question is, how many others would want one? I hope to have one done this weekend for pictures.

  I probably would...would like to see one first

done deal - I was told they are the same size as the other coldkeys - so, I will use two of the ones I have to make it. will post some pics hopefully this weekend.

I have to order thinner acrylic so my first one will be proof of concept more or less as it will be thicker than I would use to make the actual ones --- and in addition, i could do these for single cards too --- the thing about the ones linked above, is that they are sized for sports cards - unless I am mistaken - if that is true, they will be too big and the coldkeys will slide around.

I can make these for double and single.

[cygan]

@yoggie
are these actually the official coldkey cards for the q3?
for the months of july, august and september - or will there be other releases?

[chronicsky]

@yoggie
are these actually the official coldkey cards for the q3?
for the months of july, august and september - or will there be other releases?

AFAIK, these are special 3rd halving cards, and not part of history coldkey monthly release

[seek3r]

@yoggie
are these actually the official coldkey cards for the q3?
for the months of july, august and september - or will there be other releases?

Hi cygan,

hope I can help you out with ur question.
As chronicsky already mentioned this release is a special series to celebrate the BTCitcoin Halving 2020 and it doesnt affect the History Series.
The Q3 versions of the History Series will be released soon. yogg already announced the release in his ANN thread title of the History Series (" Q3 coming soon! ")

[krogothmanhattan]

I wonder if a case/holder exists that could hold both, so I don't have to worry about separating them by accident whilst displayed.

hat tip to ChiBitCTy for finding these:



https://www.ultrapro.com/product_info.php?products_id=8740

Well the ebay holder arrived and wanted to share some photos of what these card will look like in a holder.

Even thought the size is a bit large, they look amazing! I cannot wait until Mopar mining makes some for these cards.

I inserted the two cards with the seperation and also without.

[MoparMiningLLC]

I cannot wait until Mopar mining makes some for these cards.

yep - just waiting for the acrylic to come in!

[yogg]

Hey everyone !

Thank you so much for the overwhelming reaction and great feedbacks about this release to commemorate Bitcoin's third halving !
Lucho Poletti indeed did an awesome work.
He managed to perfectly capture the spirit of the piece we imagined and wanted to create for you.


The auction for the Gold variants is now over.
Many thanks to Krogoth for hosting it ! It's been quite an auction !
Thank you to every participant.

An update about the Silver and Copper variants :

The Silver 3rd Bitcoin Halving Coldkeys will be released soon here on Bitcointalk.
Be on the lookout for a WTS thread in this Collectibles section. They should be available in around a week.
We will make sure to proceed in such a way so the most people can get theirs.

More informations about the release of the Copper 3rd Bitcoin Halving Coldkeys will be available after the Silver variant has been made available.

Thank you very much for looking and for your awesome reception of our latest release.

[MoparMiningLLC]

Hey everyone !

Thank you so much for the overwhelming reaction and great feedbacks about this release to commemorate Bitcoin's third halving !
Lucho Poletti indeed did an awesome work.
He managed to perfectly capture the spirit of the piece we imagined and wanted to create for you.


The auction for the Gold variants is now over.
Many thanks to Krogoth for hosting it ! It's been quite an auction !
Thank you to every participant.

An update about the Silver and Copper variants :

The Silver 3rd Bitcoin Halving Coldkeys will be released soon here on Bitcointalk.
Be on the lookout for a WTS thread in this Collectibles section. They should be available in around a week.
We will make sure to proceed in such a way so the most people can get theirs.

More informations about the release of the Copper 3rd Bitcoin Halving Coldkeys will be available after the Silver variant has been made available.

Thank you very much for looking and for your awesome reception of our latest release.

ahh ok so not on the website lol - I had the page on a 30 second refresh worried I would miss the opportunity lol

[BitcoinOrDeath]

Hey everyone !

Thank you so much for the overwhelming reaction and great feedbacks about this release to commemorate Bitcoin's third halving !
Lucho Poletti indeed did an awesome work.
He managed to perfectly capture the spirit of the piece we imagined and wanted to create for you.


The auction for the Gold variants is now over.
Many thanks to Krogoth for hosting it ! It's been quite an auction !
Thank you to every participant.

An update about the Silver and Copper variants :

The Silver 3rd Bitcoin Halving Coldkeys will be released soon here on Bitcointalk.
Be on the lookout for a WTS thread in this Collectibles section. They should be available in around a week.
We will make sure to proceed in such a way so the most people can get theirs.

More informations about the release of the Copper 3rd Bitcoin Halving Coldkeys will be available after the Silver variant has been made available.

Thank you very much for looking and for your awesome reception of our latest release.

thanks for setting this up - the work is stunning and I can't wait to see how it looks IRL!

[krogoth]

And here they are>>> https://bitcointalk.org/index.php?topic=5266628.0