Bitcoin Forum
November 08, 2024, 05:38:43 AM *
News: Latest Bitcoin Core release: 28.0 [Torrent]
 
   Home   Help Search Login Register More  
Bitcoin Forum > Bitcoin > Mining > Mining support > HELP with 2 T17+ :(
Pages: [1] 2 »  All
« previous topic next topic »
  Print  
Author Topic: HELP with 2 T17+ :(  (Read 477 times)
gyw2020 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
September 12, 2020, 05:15:54 PM
Last edit: September 12, 2020, 11:43:32 PM by frodocooper
 #1
I have 2 T17+ suddenly i have dropped hashboard on both and different kernel logs

this is one :

Code:
0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 6/3, WL threshold: 4096, image sequence number: 225625650
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID 77A1FA3B-7843-418C-B9D1-287007A633E3, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 238/111, WL threshold: 4096, image sequence number: 614900815
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-09-11 18:40:57 driver-btm-api.c:762:init_freq_mode: This is scan-user version
2020-09-11 18:40:57 driver-btm-api.c:2553:bitmain_soc_init: opt_multi_version     = 1
2020-09-11 18:40:57 driver-btm-api.c:2554:bitmain_soc_init: opt_bitmain_ab        = 1
2020-09-11 18:40:57 driver-btm-api.c:2555:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-09-11 18:40:57 driver-btm-api.c:2556:bitmain_soc_init: Miner compile time: Tue Jun  2 10:11:10 CST 2020 type: Antminer T17+
2020-09-11 18:40:57 driver-btm-api.c:2557:bitmain_soc_init: commit version: 9e9a5bf 2020-06-01 18:48:14, build by: lol 2020-06-02 10:21:50
2020-09-11 18:40:57 driver-btm-api.c:2180:show_sn: 81246dc675104814�7
2020-09-11 18:40:57 driver-btm-api.c:2237:handle_sn_for_factory_mode: read sn success, 81246dc675104814�7
2020-09-11 18:40:57 fan.c:263:front_fan_power_on: Note: front fan is power on!
2020-09-11 18:40:57 fan.c:273:rear_fan_power_on: Note: rear fan is power on!
2020-09-11 18:40:57 driver-btm-api.c:1357:miner_device_init: Detect 256MB control board of XILINX
2020-09-11 18:40:57 driver-btm-api.c:1298:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-09-11 18:41:03 driver-btm-api.c:1281:init_miner_version: miner ID : 81246dc675104814
2020-09-11 18:41:03 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-09-11 18:41:08 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-09-11 18:41:08 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-09-11 18:41:08 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-09-11 18:41:08 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1
2020-09-11 18:41:08 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1
2020-09-11 18:41:08 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1
2020-09-11 18:41:08 driver-btm-api.c:2293:update_conf_by_power_feedback: Power feedback is disabled
2020-09-11 18:41:08 driver-btm-api.c:2261:get_calibration_voltage: calibration voltage flag is error data.
2020-09-11 18:41:08 driver-btm-api.c:2327:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0
2020-09-11 18:41:08 frequency.c:1389:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 59975, index = 3, adjust_vol = 10
2020-09-11 18:41:08 thread.c:1462:create_read_nonce_reg_thread: create thread
2020-09-11 18:41:14 driver-btm-api.c:1281:init_miner_version: miner ID : 81246dc675104814
2020-09-11 18:41:14 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-09-11 18:41:19 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-09-11 18:41:19 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-09-11 18:41:19 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-09-11 18:41:19 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1
2020-09-11 18:41:19 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1
2020-09-11 18:41:19 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1
2020-09-11 18:41:19 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[0] = 0
2020-09-11 18:41:19 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[1] = 0
2020-09-11 18:41:19 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[2] = 0
2020-09-11 18:41:19 driver-btm-api.c:2439:bitmain_board_init: g_ccdly_opt = 0
2020-09-11 18:41:19 driver-btm-api.c:775:_set_project_type: project:0, set to T17Plus always
2020-09-11 18:41:19 driver-btm-api.c:790:_set_project_type: Project type: Antminer T17+
2020-09-11 18:41:19 driver-btm-api.c:801:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-09-11 18:41:19 driver-btm-api.c:802:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-09-11 18:41:19 driver-btm-api.c:801:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-09-11 18:41:19 driver-btm-api.c:802:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-09-11 18:41:19 driver-btm-api.c:801:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-09-11 18:41:19 driver-btm-api.c:802:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-09-11 18:41:20 driver-btm-api.c:2461:bitmain_board_init: Fan check passed.
2020-09-11 18:41:21 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-09-11 18:41:23 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-09-11 18:41:25 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-09-11 18:41:27 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88
2020-09-11 18:41:28 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-09-11 18:41:30 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-09-11 18:41:30 thread.c:1457:create_pic_heart_beat_thread: create thread
2020-09-11 18:41:31 power_api.c:231:power_init: power type version: 0x0042
2020-09-11 18:41:31 power_api.c:249:power_init: Power init:
2020-09-11 18:41:31 power_api.c:250:power_init: current_voltage_raw = 0
2020-09-11 18:41:31 power_api.c:251:power_init: highest_voltage_raw = 1950
2020-09-11 18:41:31 power_api.c:252:power_init: working_voltage_raw = 1900
2020-09-11 18:41:31 power_api.c:253:power_init: higher_voltage_raw  = 1930
2020-09-11 18:41:31 power_api.c:254:power_init: check_asic_voltage_raw  = 2000
2020-09-11 18:41:31 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-09-11 18:41:31 power_api.c:221:power_off: set gpio907 to 1
2020-09-11 18:42:02 power_api.c:206:power_on: set gpio907 to 0
2020-09-11 18:42:03 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
2020-09-11 18:42:22 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 18:42:23 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:42:23 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.610540, an2 18.682520, an6 2.500000.
2020-09-11 18:42:24 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:42:24 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.512853, an2 18.658098, an6 2.500000.
2020-09-11 18:42:25 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:42:25 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.439589, an2 18.584834, an6 2.500000.
2020-09-11 18:42:25 power_api.c:85:_get_avg_voltage: average_voltage = 18.641817
2020-09-11 18:42:25 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.64, check voltage passed.
2020-09-11 18:42:27 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:42:27 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.610540, an2 18.658098, an6 2.500000.
2020-09-11 18:42:28 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:42:28 power_api.c:60:_get_avg_voltage: chain 1, an0 = 0.512853, an2 18.658098, an6 2.500000.
2020-09-11 18:42:29 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:42:29 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.439589, an2 18.584834, an6 2.500000.
2020-09-11 18:42:29 power_api.c:85:_get_avg_voltage: average_voltage = 18.633677
2020-09-11 18:42:29 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.63, check voltage passed.
2020-09-11 18:42:29 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-09-11 18:42:38 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0
2020-09-11 18:42:47 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[1]: find 44 asic, times 0
2020-09-11 18:42:56 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0
2020-09-11 18:43:01 driver-btm-api.c:425:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2020-09-11 18:43:01 driver-btm-api.c:425:set_order_clock: chain[1]: set order clock, stragegy 3 clock_en=0x1
2020-09-11 18:43:02 driver-btm-api.c:425:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2020-09-11 18:43:02 driver-btm-api.c:1931:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0
2020-09-11 18:43:02 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-09-11 18:43:02 driver-btm-api.c:1972:check_clock_counter: freq 50 clock_counter_limit 6
2020-09-11 18:43:24 voltage[0] = 1830
2020-09-11 18:43:24 voltage[1] = 1830
2020-09-11 18:43:24 voltage[2] = 1830
2020-09-11 18:43:24 power_api.c:262:set_working_voltage_raw: working_voltage_raw = 1830
2020-09-11 18:43:26 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. NCT218
2020-09-11 18:43:27 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 1 success. NCT218
2020-09-11 18:43:28 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. NCT218
2020-09-11 18:43:28 uart.c:81:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2020-09-11 18:43:30 driver-btm-api.c:294:check_bringup_temp: Bring up temperature is 27
2020-09-11 18:43:30 thread.c:1477:create_check_miner_status_thread: create thread
2020-09-11 18:43:30 thread.c:1467:create_set_miner_status_thread: create thread
2020-09-11 18:43:30 driver-btm-api.c:712:calculate_timeout: dev->timeout = 245
2020-09-11 18:43:30 thread.c:1447:create_temperature_monitor_thread: create thread
2020-09-11 18:43:30 frequency.c:527:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 27 dec_freq_index=0
2020-09-11 18:43:30 freq_tuning.c:184:freq_tuning_get_max_freq: Max freq of tuning is 790
2020-09-11 18:43:30 driver-btm-api.c:1802:send_null_work: [DEBUG] Send null work.
2020-09-11 18:43:30 thread.c:1437:create_asic_status_monitor_thread: create thread
2020-09-11 18:43:30 frequency.c:1194:inc_freq_with_fixed_vco: chain = 255, freq = 660, is_higher_voltage = true
2020-09-11 18:43:30 frequency.c:1210:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 53
2020-09-11 18:43:30 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1830, step by step.
2020-09-11 18:43:48 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 18:43:49 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:43:49 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.462726, an2 18.438304, an6 2.500000.
2020-09-11 18:43:50 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:43:50 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.487804, an2 18.414634, an6 2.500000.
2020-09-11 18:43:51 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:43:51 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.462726, an2 18.389461, an6 2.500000.
2020-09-11 18:43:51 power_api.c:85:_get_avg_voltage: average_voltage = 18.414133
2020-09-11 18:43:51 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.41, check voltage passed.
2020-09-11 18:43:53 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:43:53 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.439024, an2 18.414634, an6 2.500000.
2020-09-11 18:43:54 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:43:54 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.487804, an2 18.414634, an6 2.500000.
2020-09-11 18:43:56 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:43:56 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.462726, an2 18.389461, an6 2.500000.
2020-09-11 18:43:56 power_api.c:85:_get_avg_voltage: average_voltage = 18.406242
2020-09-11 18:43:56 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.41, check voltage passed.
2020-09-11 18:43:58 frequency.c:1210:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 62
2020-09-11 18:44:00 frequency.c:1210:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 73
2020-09-11 18:44:02 frequency.c:1210:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 75
2020-09-11 18:44:04 frequency.c:1210:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 87
2020-09-11 18:44:04 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
2020-09-11 18:44:22 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 18:44:24 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:44:24 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.609756, an2 18.609756, an6 2.500000.
2020-09-11 18:44:25 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:44:25 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.682926, an2 18.609756, an6 2.500000.
2020-09-11 18:44:26 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:44:26 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.658098, an2 18.584834, an6 2.500000.
2020-09-11 18:44:26 power_api.c:85:_get_avg_voltage: average_voltage = 18.601448
2020-09-11 18:44:26 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.60, check voltage passed.
2020-09-11 18:44:28 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:44:28 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.609756, an2 18.609756, an6 2.500000.
2020-09-11 18:44:29 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:44:29 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.682926, an2 18.609756, an6 2.500000.
2020-09-11 18:44:30 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:44:30 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.634146, an2 18.560975, an6 2.500000.
2020-09-11 18:44:30 power_api.c:85:_get_avg_voltage: average_voltage = 18.593495
2020-09-11 18:44:30 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.59, check voltage passed.
2020-09-11 18:44:32 frequency.c:1210:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 94
2020-09-11 18:44:32 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1830, step by step.
2020-09-11 18:44:50 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 18:44:51 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:44:51 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.462726, an2 18.438304, an6 2.500000.
2020-09-11 18:44:53 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:44:53 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.463414, an2 18.414634, an6 2.500000.
2020-09-11 18:44:54 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:44:54 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.462726, an2 18.365039, an6 2.500000.
2020-09-11 18:44:54 power_api.c:85:_get_avg_voltage: average_voltage = 18.405992
2020-09-11 18:44:54 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.41, check voltage passed.
2020-09-11 18:44:56 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:44:56 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.439024, an2 18.414634, an6 2.500000.
2020-09-11 18:44:57 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:44:57 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.487804, an2 18.414634, an6 2.500000.
2020-09-11 18:44:58 power_api.c:56:_get_avg_voltage: an6 raw = 2.509677, factor = 1.003871
2020-09-11 18:44:58 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.462726, an2 18.389461, an6 2.500000.
2020-09-11 18:44:58 power_api.c:85:_get_avg_voltage: average_voltage = 18.406242
2020-09-11 18:44:58 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.41, check voltage passed.
2020-09-11 18:45:00 frequency.c:1210:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 105
2020-09-11 18:45:04 frequency.c:1210:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 109
2020-09-11 18:45:09 frequency.c:1210:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 125
2020-09-11 18:45:13 frequency.c:1210:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 131
2020-09-11 18:45:18 frequency.c:1210:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 146
2020-09-11 18:45:22 frequency.c:1210:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 4, _POSTDIV2 = 4, USER_DIV = 1, freq = 164
2020-09-11 18:45:30 frequency.c:1210:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 175
2020-09-11 18:45:38 frequency.c:1210:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 188
2020-09-11 18:45:46 frequency.c:1210:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 4, _POSTDIV2 = 3, USER_DIV = 1, freq = 219
2020-09-11 18:45:59 frequency.c:1210:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 219
2020-09-11 18:46:12 frequency.c:1210:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 263
2020-09-11 18:46:30 frequency.c:1210:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 4, _POSTDIV2 = 2, USER_DIV = 1, freq = 329
2020-09-11 18:46:54 frequency.c:1210:inc_freq_with_fixed_vco: [18] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 376
2020-09-11 18:47:26 frequency.c:1210:inc_freq_with_fixed_vco: [19] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 439
2020-09-11 18:48:07 frequency.c:1210:inc_freq_with_fixed_vco: [20] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 527
2020-09-11 18:50:08 frequency.c:1210:inc_freq_with_fixed_vco: [21] _POSTDIV1 = 4, _POSTDIV2 = 1, USER_DIV = 1, freq = 659
2020-09-11 18:50:08 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1800, step by step.
2020-09-11 18:50:26 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 18:50:27 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:50:27 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.073170, an2 18.073170, an6 2.500000.
2020-09-11 18:50:28 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452
2020-09-11 18:50:28 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.123077, an2 18.074359, an6 2.500000.
2020-09-11 18:50:29 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:50:29 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.073170, an2 17.999999, an6 2.500000.
2020-09-11 18:50:29 power_api.c:85:_get_avg_voltage: average_voltage = 18.049176
2020-09-11 18:50:29 power_api.c:106:check_voltage: target_vol = 18.00, actural_vol = 18.05, check voltage passed.
2020-09-11 18:50:31 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:50:31 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.073170, an2 18.097560, an6 2.500000.
2020-09-11 18:50:32 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452
2020-09-11 18:50:32 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.123077, an2 18.074359, an6 2.500000.
2020-09-11 18:50:33 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:50:33 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.073170, an2 17.999999, an6 2.500000.
2020-09-11 18:50:33 power_api.c:85:_get_avg_voltage: average_voltage = 18.057306
2020-09-11 18:50:33 power_api.c:106:check_voltage: target_vol = 18.00, actural_vol = 18.06, check voltage passed.
2020-09-11 18:55:27 frequency.c:1231:inc_freq_with_fixed_step: chain = 0, freq_start = 660, freq_end = 675, freq_step = 5, is_higher_voltage = true
2020-09-11 18:55:28 driver-btm-api.c:2020:check_clock_counter_domain_last_core: freq 665 clock_counter_limit 20
2020-09-11 18:55:29 driver-btm-api.c:2020:check_clock_counter_domain_last_core: freq 670 clock_counter_limit 20
2020-09-11 18:55:31 driver-btm-api.c:2020:check_clock_counter_domain_last_core: freq 675 clock_counter_limit 21
2020-09-11 18:55:33 frequency.c:1231:inc_freq_with_fixed_step: chain = 2, freq_start = 660, freq_end = 675, freq_step = 5, is_higher_voltage = true
2020-09-11 18:55:33 driver-btm-api.c:2020:check_clock_counter_domain_last_core: freq 665 clock_counter_limit 20
2020-09-11 18:55:35 driver-btm-api.c:2020:check_clock_counter_domain_last_core: freq 670 clock_counter_limit 20
2020-09-11 18:55:35 register.c:1371:quick_dump_core_hash_clock_counter: bad clock counter. chain = 2, asic = 17, core = 335, found 1, clock counter 0x00A7000E
2020-09-11 18:55:37 driver-btm-api.c:2020:check_clock_counter_domain_last_core: freq 675 clock_counter_limit 21
2020-09-11 18:55:38 register.c:1371:quick_dump_core_hash_clock_counter: bad clock counter. chain = 2, asic = 17, core = 335, found 1, clock counter 0x00A7000E
2020-09-11 18:55:40 frequency.c:1231:inc_freq_with_fixed_step: chain = 0, freq_start = 675, freq_end = 675, freq_step = 5, is_higher_voltage = true
2020-09-11 18:55:40 frequency.c:1231:inc_freq_with_fixed_step: chain = 2, freq_start = 675, freq_end = 675, freq_step = 5, is_higher_voltage = true
2020-09-11 18:55:40 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 0, start = 675, freq_step = 5
2020-09-11 18:55:41 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 1, start = 660, freq_step = 5
2020-09-11 18:55:43 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 2, start = 675, freq_step = 5
2020-09-11 18:55:45 driver-btm-api.c:743:set_timeout: freq 690 final timeout=106
2020-09-11 18:55:45 power_api.c:346:set_to_working_voltage_by_steps: Set to voltage raw 1830, step by step.
2020-09-11 18:56:03 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 18:56:04 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452
2020-09-11 18:56:04 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.366667, an2 18.366667, an6 2.500000.
2020-09-11 18:56:05 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452
2020-09-11 18:56:05 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.391026, an2 18.342308, an6 2.500000.
2020-09-11 18:56:06 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452
2020-09-11 18:56:06 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.342308, an2 18.269231, an6 2.500000.
2020-09-11 18:56:06 power_api.c:85:_get_avg_voltage: average_voltage = 18.326069
2020-09-11 18:56:06 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.33, check voltage passed.
2020-09-11 18:56:08 power_api.c:56:_get_avg_voltage: an6 raw = 2.512903, factor = 1.005161
2020-09-11 18:56:08 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.365853, an2 18.365853, an6 2.500000.
2020-09-11 18:56:09 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452
2020-09-11 18:56:09 power_api.c:60:_get_avg_voltage: chain 1, an0 = 18.415385, an2 18.366667, an6 2.500000.
2020-09-11 18:56:10 power_api.c:56:_get_avg_voltage: an6 raw = 2.516129, factor = 1.006452
2020-09-11 18:56:10 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.342308, an2 18.269231, an6 2.500000.
2020-09-11 18:56:10 power_api.c:85:_get_avg_voltage: average_voltage = 18.333917
2020-09-11 18:56:10 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.33, check voltage passed.
2020-09-11 18:56:10 thread.c:1472:create_check_system_status_thread: create thread
2020-09-11 18:56:10 driver-btm-api.c:2758:bitmain_soc_init: Init done!
2020-09-11 18:56:10 driver-btm-api.c:222:set_miner_status: STATUS_INIT
2020-09-11 18:56:15 driver-btm-api.c:222:set_miner_status: STATUS_OKAY
2020-09-11 18:56:16 frequency.c:316:get_sale_hash_rate_GH: g_sale_hash_rate = 58000
2020-09-11 18:56:19 driver-btm-api.c:1539:dhash_chip_send_job: Version num 1.
2020-09-11 18:56:25 driver-btm-api.c:1539:dhash_chip_send_job: Version num 4.
2020-09-11 18:56:25 driver-btm-api.c:1686:dhash_chip_send_job: stime.tv_sec 1599850585, block_ntime 1599850582
2020-09-11 19:14:53 thread.c:1372:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 6, require 44, failed times 1: oooo ooxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
2020-09-11 19:14:53 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 55, reg = 0
2020-09-11 19:14:53 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 55, reg = 1
2020-09-11 19:14:54 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 40, reg = 0
2020-09-11 19:14:54 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 40, reg = 1
2020-09-11 19:14:54 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 175, reg = 0
2020-09-11 19:14:55 thread.c:1392:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2020-09-11 19:14:55 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 175, reg = 1
2020-09-11 19:14:55 thread.c:1372:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 6, require 44, failed times 1: oooo ooxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
2020-09-11 19:14:55 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 160, reg = 0
2020-09-11 19:14:56 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 160, reg = 1
2020-09-11 19:14:56 temperature.c:956:get_temp_info: ERROR: chain 0 can get NONE temp info or temp value abnormal, power it off 
2020-09-11 19:14:57 thread.c:1392:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2020-09-11 19:14:57 thread.c:1364:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 0, require 44, failed times 1
2020-09-11 19:14:58 frequency.c:316:get_sale_hash_rate_GH: g_sale_hash_rate = 37704
2020-09-11 19:26:25 thread.c:255:calc_hashrate_avg: avg rate is 51500.51 in 30 mins
2020-09-11 19:26:25 temperature.c:529:temp_statistics_show:   pcb temp 35~55  chip temp 58~80
2020-09-11 19:40:34 driver-btm-api.c:1539:dhash_chip_send_job: Version num 1.
2020-09-11 19:40:52 driver-btm-api.c:1539:dhash_chip_send_job: Version num 4.
2020-09-11 19:56:26 thread.c:255:calc_hashrate_avg: avg rate is 39090.97 in 30 mins
2020-09-11 19:56:26 temperature.c:529:temp_statistics_show:   pcb temp 35~55  chip temp 58~79
2020-09-11 20:26:27 thread.c:255:calc_hashrate_avg: avg rate is 38979.24 in 30 mins
2020-09-11 20:26:27 temperature.c:529:temp_statistics_show:   pcb temp 34~55  chip temp 58~80

And this is the other one:

Code:
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 237714726
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 81/39, WL threshold: 4096, image sequence number: 914180297
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BCBDE5E0-4C0B-4978-9734-FC58D9F68227, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-09-11 10:27:38 driver-btm-api.c:762:init_freq_mode: This is scan-user version
2020-09-11 10:27:38 driver-btm-api.c:2553:bitmain_soc_init: opt_multi_version     = 1
2020-09-11 10:27:38 driver-btm-api.c:2554:bitmain_soc_init: opt_bitmain_ab        = 1
2020-09-11 10:27:38 driver-btm-api.c:2555:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-09-11 10:27:38 driver-btm-api.c:2556:bitmain_soc_init: Miner compile time: Tue Jun  2 10:11:10 CST 2020 type: Antminer T17+
2020-09-11 10:27:38 driver-btm-api.c:2557:bitmain_soc_init: commit version: 9e9a5bf 2020-06-01 18:48:14, build by: lol 2020-06-02 10:21:50
2020-09-11 10:27:38 driver-btm-api.c:2180:show_sn: 81049c242b10481c�7
2020-09-11 10:27:38 driver-btm-api.c:2237:handle_sn_for_factory_mode: read sn success, 81049c242b10481c�7
2020-09-11 10:27:38 fan.c:263:front_fan_power_on: Note: front fan is power on!
2020-09-11 10:27:38 fan.c:273:rear_fan_power_on: Note: rear fan is power on!
2020-09-11 10:27:38 driver-btm-api.c:1357:miner_device_init: Detect 256MB control board of XILINX
2020-09-11 10:27:38 driver-btm-api.c:1298:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-09-11 10:27:44 driver-btm-api.c:1281:init_miner_version: miner ID : 81049c242b10481c
2020-09-11 10:27:44 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-09-11 10:27:49 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-09-11 10:27:49 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-09-11 10:27:49 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-09-11 10:27:49 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1
2020-09-11 10:27:49 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1
2020-09-11 10:27:49 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1
2020-09-11 10:27:49 driver-btm-api.c:2293:update_conf_by_power_feedback: Power feedback is disabled
2020-09-11 10:27:49 driver-btm-api.c:2297:update_conf_by_power_feedback: get_calibration_voltage, vol:1850.
2020-09-11 10:27:49 frequency.c:1389:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 59934, index = 3, adjust_vol = 30
2020-09-11 10:27:49 thread.c:1462:create_read_nonce_reg_thread: create thread
2020-09-11 10:27:55 driver-btm-api.c:1281:init_miner_version: miner ID : 81049c242b10481c
2020-09-11 10:27:55 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-09-11 10:28:00 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-09-11 10:28:00 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-09-11 10:28:00 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-09-11 10:28:00 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1
2020-09-11 10:28:00 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1
2020-09-11 10:28:00 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1
2020-09-11 10:28:00 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[0] = 0
2020-09-11 10:28:00 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[1] = 0
2020-09-11 10:28:00 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[2] = 0
2020-09-11 10:28:00 driver-btm-api.c:2439:bitmain_board_init: g_ccdly_opt = 0
2020-09-11 10:28:00 driver-btm-api.c:775:_set_project_type: project:0, set to T17Plus always
2020-09-11 10:28:00 driver-btm-api.c:790:_set_project_type: Project type: Antminer T17+
2020-09-11 10:28:00 driver-btm-api.c:801:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-09-11 10:28:00 driver-btm-api.c:802:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-09-11 10:28:00 driver-btm-api.c:801:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-09-11 10:28:00 driver-btm-api.c:802:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-09-11 10:28:00 driver-btm-api.c:801:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-09-11 10:28:00 driver-btm-api.c:802:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-09-11 10:28:01 driver-btm-api.c:2461:bitmain_board_init: Fan check passed.
2020-09-11 10:28:02 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-09-11 10:28:05 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-09-11 10:28:13 driver-btm-api.c:401:init_pic: Chain[1] PIC init failed!
2020-09-11 10:28:13 driver-btm-api.c:222:set_miner_status: ERROR_PIC_LOST
2020-09-11 10:28:13 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-09-11 10:28:29 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xff
2020-09-11 10:28:30 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-09-11 10:28:32 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-09-11 10:28:32 thread.c:1457:create_pic_heart_beat_thread: create thread
2020-09-11 10:28:34 power_api.c:231:power_init: power type version: 0x0042
2020-09-11 10:28:34 power_api.c:249:power_init: Power init:
2020-09-11 10:28:34 power_api.c:250:power_init: current_voltage_raw = 0
2020-09-11 10:28:34 power_api.c:251:power_init: highest_voltage_raw = 1950
2020-09-11 10:28:34 power_api.c:252:power_init: working_voltage_raw = 1900
2020-09-11 10:28:34 power_api.c:253:power_init: higher_voltage_raw  = 1930
2020-09-11 10:28:34 power_api.c:254:power_init: check_asic_voltage_raw  = 2000
2020-09-11 10:28:34 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-09-11 10:28:34 power_api.c:218:power_off: init gpio907
2020-09-11 10:28:34 power_api.c:221:power_off: set gpio907 to 1
2020-09-11 10:29:05 power_api.c:206:power_on: set gpio907 to 0
2020-09-11 10:29:06 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
2020-09-11 10:29:23 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 10:29:25 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032
2020-09-11 10:29:25 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.558824, an2 18.659847, an6 2.500000.
2020-09-11 10:29:26 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613
2020-09-11 10:29:26 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.775510, an2 18.612245, an6 2.500000.
2020-09-11 10:29:26 power_api.c:85:_get_avg_voltage: average_voltage = 18.636046
2020-09-11 10:29:26 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.64, check voltage passed.
2020-09-11 10:29:28 power_api.c:56:_get_avg_voltage: an6 raw = 2.525806, factor = 1.010323
2020-09-11 10:29:28 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.558110, an2 18.636016, an6 2.500000.
2020-09-11 10:29:29 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613
2020-09-11 10:29:29 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.775510, an2 18.588010, an6 2.500000.
2020-09-11 10:29:29 power_api.c:85:_get_avg_voltage: average_voltage = 18.612013
2020-09-11 10:29:29 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.61, check voltage passed.
2020-09-11 10:29:29 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-09-11 10:29:38 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0
2020-09-11 10:29:47 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0
2020-09-11 10:29:51 driver-btm-api.c:425:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2020-09-11 10:29:51 driver-btm-api.c:425:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2020-09-11 10:29:51 driver-btm-api.c:1931:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0
2020-09-11 10:29:51 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-09-11 10:29:51 driver-btm-api.c:1972:check_clock_counter: freq 50 clock_counter_limit 6
2020-09-11 10:30:06 voltage[0] = 1820
2020-09-11 10:30:06 voltage[2] = 1820
2020-09-11 10:30:06 power_api.c:262:set_working_voltage_raw: working_voltage_raw = 1820
2020-09-11 10:30:07 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. NCT218
2020-09-11 10:30:09 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. NCT218
2020-09-11 10:30:09 uart.c:81:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2020-09-11 10:30:10 driver-btm-api.c:294:check_bringup_temp: Bring up temperature is 34
2020-09-11 10:30:10 thread.c:1477:create_check_miner_status_thread: create thread
2020-09-11 10:30:10 thread.c:1467:create_set_miner_status_thread: create thread
2020-09-11 10:30:10 driver-btm-api.c:712:calculate_timeout: dev->timeout = 245
2020-09-11 10:30:10 thread.c:1447:create_temperature_monitor_thread: create thread
2020-09-11 10:30:10 frequency.c:527:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 34 dec_freq_index=0
2020-09-11 10:30:10 freq_tuning.c:184:freq_tuning_get_max_freq: Max freq of tuning is 790
2020-09-11 10:30:10 driver-btm-api.c:1802:send_null_work: [DEBUG] Send null work.
2020-09-11 10:30:10 thread.c:1437:create_asic_status_monitor_thread: create thread
2020-09-11 10:30:10 frequency.c:1194:inc_freq_with_fixed_vco: chain = 255, freq = 670, is_higher_voltage = true
2020-09-11 10:30:10 frequency.c:1210:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 41
2020-09-11 10:30:10 frequency.c:1210:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 47
2020-09-11 10:30:10 frequency.c:1210:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 55
2020-09-11 10:30:12 frequency.c:1210:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 57
2020-09-11 10:30:14 frequency.c:1210:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 67
2020-09-11 10:30:16 frequency.c:1210:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 71
2020-09-11 10:30:18 frequency.c:1210:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 80
2020-09-11 10:30:20 frequency.c:1210:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 83
2020-09-11 10:30:22 frequency.c:1210:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 95
2020-09-11 10:30:24 frequency.c:1210:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 100
2020-09-11 10:30:28 frequency.c:1210:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 111
2020-09-11 10:30:33 frequency.c:1210:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 4, _POSTDIV2 = 4, USER_DIV = 1, freq = 125
2020-09-11 10:30:37 frequency.c:1210:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 134
2020-09-11 10:30:42 frequency.c:1210:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 143
2020-09-11 10:30:46 frequency.c:1210:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 4, _POSTDIV2 = 3, USER_DIV = 1, freq = 167
2020-09-11 10:30:54 frequency.c:1210:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 167
2020-09-11 10:31:02 frequency.c:1210:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 201
2020-09-11 10:31:15 frequency.c:1210:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 3, _POSTDIV2 = 3, USER_DIV = 1, freq = 223
2020-09-11 10:31:27 frequency.c:1210:inc_freq_with_fixed_vco: [18] _POSTDIV1 = 4, _POSTDIV2 = 2, USER_DIV = 1, freq = 251
2020-09-11 10:31:27 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1830, step by step.
2020-09-11 10:31:46 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 10:31:47 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613
2020-09-11 10:31:47 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.369898, an2 18.369898, an6 2.500000.
2020-09-11 10:31:48 power_api.c:56:_get_avg_voltage: an6 raw = 2.538710, factor = 1.015484
2020-09-11 10:31:48 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.420585, an2 18.324016, an6 2.500000.
2020-09-11 10:31:48 power_api.c:85:_get_avg_voltage: average_voltage = 18.346957
2020-09-11 10:31:48 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.35, check voltage passed.
2020-09-11 10:31:50 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613
2020-09-11 10:31:50 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.369898, an2 18.418367, an6 2.500000.
2020-09-11 10:31:51 power_api.c:56:_get_avg_voltage: an6 raw = 2.538710, factor = 1.015484
2020-09-11 10:31:51 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.396443, an2 18.348158, an6 2.500000.
2020-09-11 10:31:51 power_api.c:85:_get_avg_voltage: average_voltage = 18.383262
2020-09-11 10:31:51 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.38, check voltage passed.
2020-09-11 10:32:09 frequency.c:1210:inc_freq_with_fixed_vco: [19] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 287
2020-09-11 10:32:27 frequency.c:1210:inc_freq_with_fixed_vco: [20] _POSTDIV1 = 3, _POSTDIV2 = 2, USER_DIV = 1, freq = 335
2020-09-11 10:32:27 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
2020-09-11 10:32:46 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 10:32:47 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903
2020-09-11 10:32:47 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.540128, an2 18.564332, an6 2.500000.
2020-09-11 10:32:48 power_api.c:56:_get_avg_voltage: an6 raw = 2.538710, factor = 1.015484
2020-09-11 10:32:48 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.637866, an2 18.565439, an6 2.500000.
2020-09-11 10:32:48 power_api.c:85:_get_avg_voltage: average_voltage = 18.564885
2020-09-11 10:32:48 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.56, check voltage passed.
2020-09-11 10:32:50 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613
2020-09-11 10:32:50 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.563775, an2 18.588010, an6 2.500000.
2020-09-11 10:32:51 power_api.c:56:_get_avg_voltage: an6 raw = 2.538710, factor = 1.015484
2020-09-11 10:32:51 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.613724, an2 18.517154, an6 2.500000.
2020-09-11 10:32:51 power_api.c:85:_get_avg_voltage: average_voltage = 18.552582
2020-09-11 10:32:51 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.55, check voltage passed.
2020-09-11 10:33:16 frequency.c:1210:inc_freq_with_fixed_vco: [21] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 335
2020-09-11 10:33:16 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1830, step by step.
2020-09-11 10:33:35 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 10:33:36 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613
2020-09-11 10:33:36 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.369898, an2 18.394133, an6 2.500000.
2020-09-11 10:33:37 power_api.c:56:_get_avg_voltage: an6 raw = 2.538710, factor = 1.015484
2020-09-11 10:33:37 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.420585, an2 18.348158, an6 2.500000.
2020-09-11 10:33:37 power_api.c:85:_get_avg_voltage: average_voltage = 18.371145
2020-09-11 10:33:37 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.37, check voltage passed.
2020-09-11 10:33:39 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613
2020-09-11 10:33:39 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.345663, an2 18.369898, an6 2.500000.
2020-09-11 10:33:40 power_api.c:56:_get_avg_voltage: an6 raw = 2.541935, factor = 1.016774
2020-09-11 10:33:40 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.397208, an2 18.324872, an6 2.500000.
2020-09-11 10:33:40 power_api.c:85:_get_avg_voltage: average_voltage = 18.347385
2020-09-11 10:33:40 power_api.c:106:check_voltage: target_vol = 18.30, actural_vol = 18.35, check voltage passed.
2020-09-11 10:34:05 frequency.c:1210:inc_freq_with_fixed_vco: [22] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 402
2020-09-11 10:34:45 frequency.c:1210:inc_freq_with_fixed_vco: [23] _POSTDIV1 = 4, _POSTDIV2 = 1, USER_DIV = 1, freq = 503
2020-09-11 10:36:46 frequency.c:1210:inc_freq_with_fixed_vco: [24] _POSTDIV1 = 3, _POSTDIV2 = 1, USER_DIV = 1, freq = 670
2020-09-11 10:36:46 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1820, step by step.
2020-09-11 10:37:04 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 10:37:05 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903
2020-09-11 10:37:05 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.225479, an2 18.249682, an6 2.500000.
2020-09-11 10:37:06 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2020-09-11 10:37:06 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.277567, an2 18.205324, an6 2.500000.
2020-09-11 10:37:06 power_api.c:85:_get_avg_voltage: average_voltage = 18.227503
2020-09-11 10:37:06 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.23, check voltage passed.
2020-09-11 10:37:08 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903
2020-09-11 10:37:08 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.225479, an2 18.249682, an6 2.500000.
2020-09-11 10:37:10 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2020-09-11 10:37:10 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.277567, an2 18.205324, an6 2.500000.
2020-09-11 10:37:10 power_api.c:85:_get_avg_voltage: average_voltage = 18.227503
2020-09-11 10:37:10 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.23, check voltage passed.
2020-09-11 10:42:04 frequency.c:1231:inc_freq_with_fixed_step: chain = 0, freq_start = 670, freq_end = 670, freq_step = 5, is_higher_voltage = true
2020-09-11 10:42:04 frequency.c:1231:inc_freq_with_fixed_step: chain = 2, freq_start = 670, freq_end = 670, freq_step = 5, is_higher_voltage = true
2020-09-11 10:42:04 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 0, start = 670, freq_step = 5
2020-09-11 10:42:05 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 2, start = 670, freq_step = 5
2020-09-11 10:42:07 driver-btm-api.c:743:set_timeout: freq 690 final timeout=106
2020-09-11 10:42:07 power_api.c:346:set_to_working_voltage_by_steps: Set to voltage raw 1820, step by step.
2020-09-11 10:42:22 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-11 10:42:23 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903
2020-09-11 10:42:23 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.201275, an2 18.249682, an6 2.500000.
2020-09-11 10:42:24 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2020-09-11 10:42:24 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.254432, an2 18.206330, an6 2.500000.
2020-09-11 10:42:24 power_api.c:85:_get_avg_voltage: average_voltage = 18.228006
2020-09-11 10:42:24 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.23, check voltage passed.
2020-09-11 10:42:26 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903
2020-09-11 10:42:26 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.201275, an2 18.249682, an6 2.500000.
2020-09-11 10:42:27 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2020-09-11 10:42:27 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.230381, an2 18.182280, an6 2.500000.
2020-09-11 10:42:27 power_api.c:85:_get_avg_voltage: average_voltage = 18.215981
2020-09-11 10:42:27 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.22, check voltage passed.
2020-09-11 10:42:27 thread.c:1472:create_check_system_status_thread: create thread
2020-09-11 10:42:27 driver-btm-api.c:2758:bitmain_soc_init: Init done!
2020-09-11 10:42:27 driver-btm-api.c:222:set_miner_status: STATUS_INIT
2020-09-11 10:42:31 driver-btm-api.c:222:set_miner_status: STATUS_OKAY
2020-09-11 10:42:32 frequency.c:316:get_sale_hash_rate_GH: g_sale_hash_rate = 37704
2020-09-11 10:42:36 driver-btm-api.c:1539:dhash_chip_send_job: Version num 4.
2020-09-11 10:42:36 driver-btm-api.c:1686:dhash_chip_send_job: stime.tv_sec 1599820956, block_ntime 1599820949
2020-09-11 11:12:37 thread.c:255:calc_hashrate_avg: avg rate is 39443.76 in 30 mins
2020-09-11 11:12:37 temperature.c:529:temp_statistics_show:   pcb temp 43~61  chip temp 66~83
2020-09-11 11:32:30 driver-btm-api.c:1539:dhash_chip_send_job: Version num 1.
2020-09-11 11:32:42 driver-btm-api.c:1539:dhash_chip_send_job: Version num 4.
favebook
Sr. Member
****
Offline Offline

Activity: 604
Merit: 416


View Profile
September 12, 2020, 06:45:53 PM
Last edit: September 12, 2020, 11:44:17 PM by frodocooper
Merited by mikeywith (1)
 #2
First one is odd one. Looks like failed tune. I'd try custom firmware for it.

Second one is even odder one. It noticed the second hashboard at start and then after voltage check it just decided to ignore it... Try checking if PSU has good connection with your hashboards and check all the cables, especially the ones that are for data.

Also, a little bit of history on units would be useful. Are units new? Did you modify them or clean them in any way? Did you try custom firmwares on those machines? What voltage are you using? I assume it's 220v.
gyw2020 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
September 12, 2020, 06:55:52 PM
Last edit: September 12, 2020, 11:45:14 PM by frodocooper
 #3
Both new. the first one was a replace from bitmain and the other one from june. I clean them two days ago gently with a painting brush the front part they were working perfect and the error ocurred after electricity was gone like one day ago never custom firmware and voltage always 220. Maybe elctricity gone burn the psu?

Do you have a link to a video on how to open psu and what cables are you referring to.

Thanks!


first one repaired i reupload firmware. but the second one still saying this:

Code:
2020-09-12 20:19:24 driver-btm-api.c:801:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:802:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:801:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:802:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:801:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:802:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:2461:bitmain_board_init: Fan check passed.
2020-09-12 20:19:25 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-09-12 20:19:27 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-09-12 20:19:35 driver-btm-api.c:401:init_pic: Chain[1] PIC init failed!
2020-09-12 20:19:35 driver-btm-api.c:222:set_miner_status: ERROR_PIC_LOST
2020-09-12 20:19:35 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-09-12 20:19:52 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xff
2020-09-12 20:19:53 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-09-12 20:19:55 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-09-12 20:19:55 thread.c:1457:create_pic_heart_beat_thread: create thread
2020-09-12 20:19:57 power_api.c:231:power_init: power type version: 0x0042
2020-09-12 20:19:57 power_api.c:249:power_init: Power init:
2020-09-12 20:19:57 power_api.c:250:power_init: current_voltage_raw = 0
2020-09-12 20:19:57 power_api.c:251:power_init: highest_voltage_raw = 1950
2020-09-12 20:19:57 power_api.c:252:power_init: working_voltage_raw = 1900
2020-09-12 20:19:57 power_api.c:253:power_init: higher_voltage_raw  = 1930
2020-09-12 20:19:57 power_api.c:254:power_init: check_asic_voltage_raw  = 2000
2020-09-12 20:19:57 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-09-12 20:19:57 power_api.c:221:power_off: set gpio907 to 1
favebook
Sr. Member
****
Offline Offline

Activity: 604
Merit: 416


View Profile
September 12, 2020, 08:29:25 PM
Last edit: September 12, 2020, 11:46:11 PM by frodocooper
 #4
Could be when electricity went down (and maybe up in same time) voltage hurt the PSU. Everything I said still stands. Try custom firmware with underclock and check the cables but if they are new from Bitmain, cables should be placed perfectly. PSU is connected via plates, they should be connected well, and it should be easy to differentiate Data cables and Fan cables. I do not know of any specific video, but you could look into "teardown of Antminer S17" or something like that on youtube. Otherwise, you can just start unscrewing screws and make sure you do not forget which go where as there are different ones (take pictures).

Or if you are scared to do that, just skip that part and try custom firmware and RMA the units if even that doesn't help, or just RMA right now.

Also, it should be obvious, but you should have already tried different PSU cables as well as rebooting miners 2-3 times just to make sure it isn't a bug in software (not that they happen often or ever for that matter).

You could also try different power outlets.

There is 20+ threads similar to yours which have problems with 17th series, so you can check them for more tips.

Also, if you cleaned them gently as you say (without water I assume), then that couldn't have caused problems.

Quote from: gyw2020 on September 12, 2020, 08:21:50 PM
first one repaired i reupload firmware. but the second one still saying this...

Nothing wrong there, you didn't let it finish the turn on sequence that can last up to 10 minutes. Just let it boot fully and then post the logs again.
gyw2020 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
September 12, 2020, 08:32:21 PM
Last edit: September 12, 2020, 11:46:49 PM by frodocooper
 #5
the first one i did several reboot and only with new firmware was solved and in the second one couple of reboots new firmware and still this in the log

Code:
2020-09-12 20:19:35 driver-btm-api.c:401:init_pic: Chain[1] PIC init failed!
2020-09-12 20:19:35 driver-btm-api.c:222:set_miner_status: ERROR_PIC_LOST

fully on and one hasboard down.
favebook
Sr. Member
****
Offline Offline

Activity: 604
Merit: 416


View Profile
September 12, 2020, 08:43:10 PM
Last edit: September 12, 2020, 11:47:52 PM by frodocooper
 #6
That still not a full log.

This could be firmware screw up. Try using older firmware or custom one and then rebooting.
gyw2020 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
September 12, 2020, 08:44:20 PM
Last edit: September 12, 2020, 11:48:18 PM by frodocooper
 #7
here is full log

Code:
Booting Linux on physical CPU 0x0
Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018
CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152
pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 203416K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25960K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090c424   (9234 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b39fe0   ( 232 kB)
       .bss : 0xc0b39fe0 - 0xc0b71c28   ( 224 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 12920K (cce62000 - cdb00000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAGAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
6 ofpart partitions found on MTD device pl35x-nand
Creating 6 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000006000000 : "reserve"
0x000006000000-0x000008000000 : "ramfs-bak"
0x000008000000-0x000010000000 : "reserve1"
NET: Registered protocol family 10
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr
random: dd urandom read with 0 bits of entropy available
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 8/3, WL threshold: 4096, image sequence number: 237714726
ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40
ubi0: background thread "ubi_bgt0d" started, PID 708
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model
ubi1: attaching mtd5
ubi1: scanning is finished
ubi1: attached mtd5 (name "reserve1", size 128 MiB)
ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0
ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi1: max/mean erase counter: 81/39, WL threshold: 4096, image sequence number: 914180297
ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36
ubi1: background thread "ubi_bgt1d" started, PID 720
UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723
UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1"
UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs)
UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB)
UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID BCBDE5E0-4C0B-4978-9734-FC58D9F68227, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfb38000
*base_vir_addr = 0xb023
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000
random: nonblocking pool is initialized
2020-09-12 20:19:01 driver-btm-api.c:762:init_freq_mode: This is scan-user version
2020-09-12 20:19:01 driver-btm-api.c:2553:bitmain_soc_init: opt_multi_version     = 1
2020-09-12 20:19:01 driver-btm-api.c:2554:bitmain_soc_init: opt_bitmain_ab        = 1
2020-09-12 20:19:01 driver-btm-api.c:2555:bitmain_soc_init: opt_bitmain_work_mode = 0
2020-09-12 20:19:01 driver-btm-api.c:2556:bitmain_soc_init: Miner compile time: Tue Jun  2 10:11:10 CST 2020 type: Antminer T17+
2020-09-12 20:19:01 driver-btm-api.c:2557:bitmain_soc_init: commit version: 9e9a5bf 2020-06-01 18:48:14, build by: lol 2020-06-02 10:21:50
2020-09-12 20:19:01 driver-btm-api.c:2180:show_sn: 81049c242b10481c�7
2020-09-12 20:19:01 driver-btm-api.c:2237:handle_sn_for_factory_mode: read sn success, 81049c242b10481c�7
2020-09-12 20:19:01 fan.c:263:front_fan_power_on: Note: front fan is power on!
2020-09-12 20:19:01 fan.c:273:rear_fan_power_on: Note: rear fan is power on!
2020-09-12 20:19:01 driver-btm-api.c:1357:miner_device_init: Detect 256MB control board of XILINX
2020-09-12 20:19:01 driver-btm-api.c:1298:init_fan_parameter: fan_eft : 0  fan_pwm : 0
2020-09-12 20:19:07 driver-btm-api.c:1281:init_miner_version: miner ID : 81049c242b10481c
2020-09-12 20:19:07 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-09-12 20:19:13 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-09-12 20:19:13 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-09-12 20:19:13 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-09-12 20:19:13 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1
2020-09-12 20:19:13 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1
2020-09-12 20:19:13 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1
2020-09-12 20:19:13 driver-btm-api.c:2293:update_conf_by_power_feedback: Power feedback is disabled
2020-09-12 20:19:13 driver-btm-api.c:2297:update_conf_by_power_feedback: get_calibration_voltage, vol:1850.
2020-09-12 20:19:13 frequency.c:1389:adjust_higer_max_vol_table: adjust_higer_max_vol_table, ideal_hashrate = 59934, index = 3, adjust_vol = 30
2020-09-12 20:19:13 thread.c:1462:create_read_nonce_reg_thread: create thread
2020-09-12 20:19:19 driver-btm-api.c:1281:init_miner_version: miner ID : 81049c242b10481c
2020-09-12 20:19:19 driver-btm-api.c:1287:init_miner_version: FPGA Version = 0xB023
2020-09-12 20:19:24 driver-btm-api.c:814:get_product_id: product_id[0] = 0
2020-09-12 20:19:24 driver-btm-api.c:814:get_product_id: product_id[1] = 0
2020-09-12 20:19:24 driver-btm-api.c:814:get_product_id: product_id[2] = 0
2020-09-12 20:19:24 driver-btm-api.c:845:get_chip_version: chip_version[0] = 1
2020-09-12 20:19:24 driver-btm-api.c:845:get_chip_version: chip_version[1] = 1
2020-09-12 20:19:24 driver-btm-api.c:845:get_chip_version: chip_version[2] = 1
2020-09-12 20:19:24 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[0] = 0
2020-09-12 20:19:24 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[1] = 0
2020-09-12 20:19:24 driver-btm-api.c:1944:get_ccdly_opt: ccdly_opt[2] = 0
2020-09-12 20:19:24 driver-btm-api.c:2439:bitmain_board_init: g_ccdly_opt = 0
2020-09-12 20:19:24 driver-btm-api.c:775:_set_project_type: project:0, set to T17Plus always
2020-09-12 20:19:24 driver-btm-api.c:790:_set_project_type: Project type: Antminer T17+
2020-09-12 20:19:24 driver-btm-api.c:801:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:802:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:801:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:802:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:801:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:802:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100
2020-09-12 20:19:24 driver-btm-api.c:2461:bitmain_board_init: Fan check passed.
2020-09-12 20:19:25 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app
2020-09-12 20:19:27 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88
2020-09-12 20:19:35 driver-btm-api.c:401:init_pic: Chain[1] PIC init failed!
2020-09-12 20:19:35 driver-btm-api.c:222:set_miner_status: ERROR_PIC_LOST
2020-09-12 20:19:35 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app
2020-09-12 20:19:52 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xff
2020-09-12 20:19:53 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app
2020-09-12 20:19:55 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88
2020-09-12 20:19:55 thread.c:1457:create_pic_heart_beat_thread: create thread
2020-09-12 20:19:57 power_api.c:231:power_init: power type version: 0x0042
2020-09-12 20:19:57 power_api.c:249:power_init: Power init:
2020-09-12 20:19:57 power_api.c:250:power_init: current_voltage_raw = 0
2020-09-12 20:19:57 power_api.c:251:power_init: highest_voltage_raw = 1950
2020-09-12 20:19:57 power_api.c:252:power_init: working_voltage_raw = 1900
2020-09-12 20:19:57 power_api.c:253:power_init: higher_voltage_raw  = 1930
2020-09-12 20:19:57 power_api.c:254:power_init: check_asic_voltage_raw  = 2000
2020-09-12 20:19:57 driver-btm-api.c:2471:bitmain_board_init: Enter 30s sleep to make sure power release finish.
2020-09-12 20:19:57 power_api.c:221:power_off: set gpio907 to 1
2020-09-12 20:20:28 power_api.c:206:power_on: set gpio907 to 0
2020-09-12 20:20:29 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1850, step by step.
2020-09-12 20:20:46 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-12 20:20:48 power_api.c:56:_get_avg_voltage: an6 raw = 2.522581, factor = 1.009032
2020-09-12 20:20:48 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.534527, an2 18.684143, an6 2.500000.
2020-09-12 20:20:49 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613
2020-09-12 20:20:49 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.775510, an2 18.588010, an6 2.500000.
2020-09-12 20:20:49 power_api.c:85:_get_avg_voltage: average_voltage = 18.636077
2020-09-12 20:20:49 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.64, check voltage passed.
2020-09-12 20:20:51 power_api.c:56:_get_avg_voltage: an6 raw = 2.525806, factor = 1.010323
2020-09-12 20:20:51 power_api.c:60:_get_avg_voltage: chain 0, an0 = 0.533844, an2 18.611751, an6 2.500000.
2020-09-12 20:20:52 power_api.c:56:_get_avg_voltage: an6 raw = 2.529032, factor = 1.011613
2020-09-12 20:20:52 power_api.c:60:_get_avg_voltage: chain 2, an0 = 0.775510, an2 18.588010, an6 2.500000.
2020-09-12 20:20:52 power_api.c:85:_get_avg_voltage: average_voltage = 18.599880
2020-09-12 20:20:52 power_api.c:106:check_voltage: target_vol = 18.50, actural_vol = 18.60, check voltage passed.
2020-09-12 20:20:52 uart.c:81:set_baud: set fpga_baud = 115200, fpga_divider = 26
2020-09-12 20:21:01 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0
2020-09-12 20:21:10 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0
2020-09-12 20:21:14 driver-btm-api.c:425:set_order_clock: chain[0]: set order clock, stragegy 3 clock_en=0x1
2020-09-12 20:21:14 driver-btm-api.c:425:set_order_clock: chain[2]: set order clock, stragegy 3 clock_en=0x1
2020-09-12 20:21:14 driver-btm-api.c:1931:get_core_clock_delay_setting: PWTH_SEL 3, CCDLY_SEL 0
2020-09-12 20:21:14 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34
2020-09-12 20:21:14 driver-btm-api.c:1972:check_clock_counter: freq 50 clock_counter_limit 6
2020-09-12 20:21:29 voltage[0] = 1820
2020-09-12 20:21:29 voltage[2] = 1820
2020-09-12 20:21:29 power_api.c:262:set_working_voltage_raw: working_voltage_raw = 1820
2020-09-12 20:21:30 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 0 success. NCT218
2020-09-12 20:21:31 temperature.c:313:calibrate_temp_sensor_one_chain: Temperature sensor calibration: chain 2 success. NCT218
2020-09-12 20:21:32 uart.c:81:set_baud: set fpga_baud = 6000000, fpga_divider = 3
2020-09-12 20:21:32 driver-btm-api.c:294:check_bringup_temp: Bring up temperature is 30
2020-09-12 20:21:32 thread.c:1477:create_check_miner_status_thread: create thread
2020-09-12 20:21:32 thread.c:1467:create_set_miner_status_thread: create thread
2020-09-12 20:21:32 driver-btm-api.c:712:calculate_timeout: dev->timeout = 245
2020-09-12 20:21:32 thread.c:1447:create_temperature_monitor_thread: create thread
2020-09-12 20:21:32 frequency.c:527:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 30 dec_freq_index=0
2020-09-12 20:21:32 freq_tuning.c:184:freq_tuning_get_max_freq: Max freq of tuning is 790
2020-09-12 20:21:32 driver-btm-api.c:1802:send_null_work: [DEBUG] Send null work.
2020-09-12 20:21:32 thread.c:1437:create_asic_status_monitor_thread: create thread
2020-09-12 20:21:32 frequency.c:1194:inc_freq_with_fixed_vco: chain = 255, freq = 670, is_higher_voltage = true
2020-09-12 20:21:32 frequency.c:1210:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 41
2020-09-12 20:21:32 frequency.c:1210:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 47
2020-09-12 20:21:32 frequency.c:1210:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 55
2020-09-12 20:21:34 frequency.c:1210:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 57
2020-09-12 20:21:36 frequency.c:1210:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 67
2020-09-12 20:21:38 frequency.c:1210:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 71
2020-09-12 20:21:41 frequency.c:1210:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 80
2020-09-12 20:21:43 frequency.c:1210:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 83
2020-09-12 20:21:45 frequency.c:1210:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 95
2020-09-12 20:21:47 frequency.c:1210:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 100
2020-09-12 20:21:51 frequency.c:1210:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 111
2020-09-12 20:21:56 frequency.c:1210:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 4, _POSTDIV2 = 4, USER_DIV = 1, freq = 125
2020-09-12 20:22:00 frequency.c:1210:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 134
2020-09-12 20:22:05 frequency.c:1210:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 143
2020-09-12 20:22:09 frequency.c:1210:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 4, _POSTDIV2 = 3, USER_DIV = 1, freq = 167
2020-09-12 20:22:17 frequency.c:1210:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 167
2020-09-12 20:22:25 frequency.c:1210:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 201
2020-09-12 20:22:38 frequency.c:1210:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 3, _POSTDIV2 = 3, USER_DIV = 1, freq = 223
2020-09-12 20:22:50 frequency.c:1210:inc_freq_with_fixed_vco: [18] _POSTDIV1 = 4, _POSTDIV2 = 2, USER_DIV = 1, freq = 251
2020-09-12 20:23:08 frequency.c:1210:inc_freq_with_fixed_vco: [19] _POSTDIV1 = 7, _POSTDIV2 = 1, USER_DIV = 1, freq = 287
2020-09-12 20:23:26 frequency.c:1210:inc_freq_with_fixed_vco: [20] _POSTDIV1 = 3, _POSTDIV2 = 2, USER_DIV = 1, freq = 335
2020-09-12 20:23:51 frequency.c:1210:inc_freq_with_fixed_vco: [21] _POSTDIV1 = 6, _POSTDIV2 = 1, USER_DIV = 1, freq = 335
2020-09-12 20:24:15 frequency.c:1210:inc_freq_with_fixed_vco: [22] _POSTDIV1 = 5, _POSTDIV2 = 1, USER_DIV = 1, freq = 402
2020-09-12 20:24:56 frequency.c:1210:inc_freq_with_fixed_vco: [23] _POSTDIV1 = 4, _POSTDIV2 = 1, USER_DIV = 1, freq = 503
2020-09-12 20:26:57 frequency.c:1210:inc_freq_with_fixed_vco: [24] _POSTDIV1 = 3, _POSTDIV2 = 1, USER_DIV = 1, freq = 670
2020-09-12 20:26:57 power_api.c:388:set_to_voltage_by_steps: Set to voltage raw 1820, step by step.
2020-09-12 20:27:14 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-12 20:27:15 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903
2020-09-12 20:27:15 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.225479, an2 18.249682, an6 2.500000.
2020-09-12 20:27:16 power_api.c:56:_get_avg_voltage: an6 raw = 2.541935, factor = 1.016774
2020-09-12 20:27:16 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.276649, an2 18.228426, an6 2.500000.
2020-09-12 20:27:16 power_api.c:85:_get_avg_voltage: average_voltage = 18.239054
2020-09-12 20:27:16 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.24, check voltage passed.
2020-09-12 20:27:18 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903
2020-09-12 20:27:18 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.225479, an2 18.273886, an6 2.500000.
2020-09-12 20:27:19 power_api.c:56:_get_avg_voltage: an6 raw = 2.545161, factor = 1.018064
2020-09-12 20:27:19 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.277567, an2 18.229405, an6 2.500000.
2020-09-12 20:27:19 power_api.c:85:_get_avg_voltage: average_voltage = 18.251645
2020-09-12 20:27:19 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.25, check voltage passed.
2020-09-12 20:32:13 frequency.c:1231:inc_freq_with_fixed_step: chain = 0, freq_start = 670, freq_end = 670, freq_step = 5, is_higher_voltage = true
2020-09-12 20:32:13 frequency.c:1231:inc_freq_with_fixed_step: chain = 2, freq_start = 670, freq_end = 670, freq_step = 5, is_higher_voltage = true
2020-09-12 20:32:13 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 0, start = 670, freq_step = 5
2020-09-12 20:32:15 frequency.c:1058:inc_asic_diff_freq_by_steps: chain = 2, start = 670, freq_step = 5
2020-09-12 20:32:16 driver-btm-api.c:743:set_timeout: freq 690 final timeout=106
2020-09-12 20:32:16 power_api.c:346:set_to_working_voltage_by_steps: Set to voltage raw 1820, step by step.
2020-09-12 20:32:32 power_api.c:120:check_voltage_multi: retry time: 0
2020-09-12 20:32:33 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903
2020-09-12 20:32:33 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.201275, an2 18.249682, an6 2.500000.
2020-09-12 20:32:34 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2020-09-12 20:32:34 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.230381, an2 18.206330, an6 2.500000.
2020-09-12 20:32:34 power_api.c:85:_get_avg_voltage: average_voltage = 18.228006
2020-09-12 20:32:34 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.23, check voltage passed.
2020-09-12 20:32:36 power_api.c:56:_get_avg_voltage: an6 raw = 2.532258, factor = 1.012903
2020-09-12 20:32:36 power_api.c:60:_get_avg_voltage: chain 0, an0 = 18.225479, an2 18.273886, an6 2.500000.
2020-09-12 20:32:37 power_api.c:56:_get_avg_voltage: an6 raw = 2.548387, factor = 1.019355
2020-09-12 20:32:37 power_api.c:60:_get_avg_voltage: chain 2, an0 = 18.254432, an2 18.206330, an6 2.500000.
2020-09-12 20:32:37 power_api.c:85:_get_avg_voltage: average_voltage = 18.240108
2020-09-12 20:32:37 power_api.c:106:check_voltage: target_vol = 18.20, actural_vol = 18.24, check voltage passed.
2020-09-12 20:32:37 thread.c:1472:create_check_system_status_thread: create thread
2020-09-12 20:32:37 driver-btm-api.c:2758:bitmain_soc_init: Init done!
2020-09-12 20:32:37 driver-btm-api.c:222:set_miner_status: STATUS_INIT
2020-09-12 20:32:42 driver-btm-api.c:222:set_miner_status: STATUS_OKAY
2020-09-12 20:32:43 frequency.c:316:get_sale_hash_rate_GH: g_sale_hash_rate = 37704
2020-09-12 20:32:48 driver-btm-api.c:1539:dhash_chip_send_job: Version num 4.
2020-09-12 20:32:48 driver-btm-api.c:1686:dhash_chip_send_job: stime.tv_sec 1599942768, block_ntime 1599942740

Tomorrow morning i open psu and check cables im also going to cry a little bit to bitmain to see if the send me a psu.
favebook
Sr. Member
****
Offline Offline

Activity: 604
Merit: 416


View Profile
September 12, 2020, 10:46:23 PM
 #8
Nothing really changed, so try using different firmware. Also, do not hope for PSU. Bitmain will NEVER send you parts on their own even if you beg. You either buy it and hope it is the fix or you RMA it. But before that try firmwares and check visually tomorrow.
mikeywith
Legendary
*
Offline Offline

Activity: 2408
Merit: 6618


be constructive or S.T.F.U


View Profile
September 13, 2020, 11:54:46 AM
 #9
Code:
2020-09-11 10:29:38 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0
2020-09-11 10:29:47 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0

This is pretty strange given that (according to my understanding) all 3 hashboards are attached to the control board and PSU, what you would expect is

Code:
2020-09-11 10:29:38 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[0]: find 44 asic, times 0
2020-09-11 10:29:38 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0
2020-09-11 10:29:47 driver-btm-api.c:1162:check_asic_number_with_power_on: Chain[2]: find 44 asic, times 0

It seems like the control board can't even see the middle chain, make sure all ribbon cables are firmly attached and that the PSU busbars screws are well tightened.
█▀▀▀
█
█
█
█
█
█
█
█
█
█
█
█▄▄▄
▀▀▀▀▀▀▀▀▀▀▀
e
▄▄▄▄▄▄▄▄▄▄▄
██████████████▄
████████████▄███
██▐███████▄█████▀
█████████▄████▀
███▐████▄███▀
████▐██████▀
█████▀█████
███████████▄
████████████▄
██▄█████▀█████▄
▄█████████▀█████▀
████████████▀██▀
████▀█████████▀		▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
c.h.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀▀█
█
█
█
█
█
█
█
█
█
█
█
▄▄▄█
▄██████▄▄▄
█████████████▄▄
███████████████
███████████████
███████████████
███████████████
███░░█████████
███▌▐█████████
█████████████
███████████▀
██████████▀
████████▀
░▀▀██▀▀
philipma1957
Legendary
*
Offline Offline

Activity: 4298
Merit: 8812


'The right to privacy matters'


View Profile WWW
September 13, 2020, 01:20:32 PM
 #10
try theirry4wd firmware for 17+.

 set freq at 715

set volts to 1765

this has helped my 17+
▄▄███████▄▄
▄███████████████▄
▄███████████████████▄
▄████▀▀▀▀███▀▀▀▀██████▄
▄██████████▀███▄█▀██████▄
█████████▄███▄███████████
███████████▄█▀███████████
███████████▀███▀█████████
▀██████▄█▀███▄██████████▀
▀██████▄▄▄▄███▄▄▄▄████▀
▀███████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN │ THE FIRST WEB3 CASINO   		.
.. PLAY NOW ..
gyw2020 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
September 13, 2020, 04:18:59 PM
 #11
Quote from: philipma1957 on September 13, 2020, 01:20:32 PM
try theirry4wd firmware for 17+.

 set freq at 715

set volts to 1765

this has helped my 17+

Where can i find it ?
philipma1957
Legendary
*
Offline Offline

Activity: 4298
Merit: 8812


'The right to privacy matters'


View Profile WWW
September 13, 2020, 04:29:40 PM
Last edit: September 13, 2020, 11:56:01 PM by frodocooper
 #12
https://bitcointalk.org/index.php?topic=5265677.0

newest screen shot shows good results.

ie 62 th for more then 1 week in a row.

https://i.imgur.com/4Lt4TRY.png
▄▄███████▄▄
▄███████████████▄
▄███████████████████▄
▄████▀▀▀▀███▀▀▀▀██████▄
▄██████████▀███▄█▀██████▄
█████████▄███▄███████████
███████████▄█▀███████████
███████████▀███▀█████████
▀██████▄█▀███▄██████████▀
▀██████▄▄▄▄███▄▄▄▄████▀
▀███████████████████▀
▀███████████████▀
▀▀███████▀▀
.
 MΞTAWIN │ THE FIRST WEB3 CASINO   		.
.. PLAY NOW ..
gyw2020 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
September 13, 2020, 07:41:50 PM
Last edit: September 13, 2020, 11:56:25 PM by frodocooper
 #13
Thanks ill try, the other miner after a day a hashboard down again.

Code:
2020-09-13 15:36:42 thread.c:255:calc_hashrate_avg: avg rate is 59435.25 in 30 mins
2020-09-13 15:36:42 temperature.c:529:temp_statistics_show:   pcb temp 38~57  chip temp 60~79
2020-09-13 16:06:43 thread.c:255:calc_hashrate_avg: avg rate is 59546.40 in 30 mins
2020-09-13 16:06:43 temperature.c:529:temp_statistics_show:   pcb temp 37~56  chip temp 59~79
2020-09-13 16:36:45 thread.c:255:calc_hashrate_avg: avg rate is 59623.18 in 30 mins
2020-09-13 16:36:45 temperature.c:529:temp_statistics_show:   pcb temp 37~56  chip temp 60~80
2020-09-13 16:42:11 thread.c:1372:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 6, require 44, failed times 1: oooo ooxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
2020-09-13 16:42:11 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 55, reg = 0
2020-09-13 16:42:12 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 55, reg = 1
2020-09-13 16:42:12 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 40, reg = 0
2020-09-13 16:42:12 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 40, reg = 1
2020-09-13 16:42:13 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 175, reg = 0
2020-09-13 16:42:13 thread.c:1392:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 0 times.
2020-09-13 16:42:13 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 175, reg = 1
2020-09-13 16:42:13 thread.c:1372:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 6, require 44, failed times 1: oooo ooxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx xxxx
2020-09-13 16:42:13 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 160, reg = 0
2020-09-13 16:42:14 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 160, reg = 1
2020-09-13 16:42:15 temperature.c:956:get_temp_info: ERROR: chain 0 can get NONE temp info or temp value abnormal, power it off 
2020-09-13 16:42:15 thread.c:1392:asic_status_monitor_thread: chain 0 can't get enough hashrate reg val for 1 times.
2020-09-13 16:42:15 thread.c:1364:asic_status_monitor_thread: ERROR: chain 0 get hashrate_reg_counter 0, require 44, failed times 1
2020-09-13 16:42:16 frequency.c:316:get_sale_hash_rate_GH: g_sale_hash_rate = 37704
2020-09-13 17:06:46 thread.c:255:calc_hashrate_avg: avg rate is 42784.49 in 30 mins
2020-09-13 17:06:46 temperature.c:529:temp_statistics_show:   pcb temp 36~55  chip temp 59~79
2020-09-13 17:36:47 thread.c:255:calc_hashrate_avg: avg rate is 39490.23 in 30 mins
2020-09-13 17:36:47 temperature.c:529:temp_statistics_show:   pcb temp 36~55  chip temp 58~79
2020-09-13 18:06:48 thread.c:255:calc_hashrate_avg: avg rate is 39136.14 in 30 mins
2020-09-13 18:06:48 temperature.c:529:temp_statistics_show:   pcb temp 35~55  chip temp 58~80
2020-09-13 18:36:50 thread.c:255:calc_hashrate_avg: avg rate is 39406.59 in 30 mins
2020-09-13 18:36:50 temperature.c:529:temp_statistics_show:   pcb temp 35~55  chip temp 58~80
2020-09-13 19:06:51 thread.c:255:calc_hashrate_avg: avg rate is 39151.41 in 30 mins
2020-09-13 19:06:51 temperature.c:529:temp_statistics_show:   pcb temp 35~55  chip temp 59~79
2020-09-13 19:36:52 thread.c:255:calc_hashrate_avg: avg rate is 39336.52 in 30 mins
2020-09-13 19:36:52 temperature.c:529:temp_statistics_show:   pcb temp 35~55  chip temp 58~80
favebook
Sr. Member
****
Offline Offline

Activity: 604
Merit: 416


View Profile
September 13, 2020, 09:48:20 PM
 #14
As both Phil and I suggested already. Try custom firmware and see what the result is.
mikeywith
Legendary
*
Offline Offline

Activity: 2408
Merit: 6618


be constructive or S.T.F.U


View Profile
September 13, 2020, 10:27:47 PM
 #15
Code:
2020-09-13 16:42:12 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 0, chip = 55, reg = 1
2020-09-13 16:42:12 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 1, chip = 40, reg = 0
2020-09-13 16:42:13 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 2, chip = 175, reg = 0
2020-09-13 16:42:13 temperature.c:924:get_temp_info: read temp sensor failed: chain = 0, sensor = 3, chip = 160, reg = 0

All 4 sensors are lost, we had a whole topic discussing this issue, this is certainly isn't a temp sensor issue but rather 1 or more heatsinks lost contact to the chips or the chip itself lost contact to the board, since the chip/heatsink hasn't fallen entirely, it will work at times and stop when it gets hot, in many cases people reported success by applying some pressure on all heatsinks in an attempt to stick that heatsink/chip since you can't tell which chip has gone bad, you will have to that to all chips.

Having said that, all of these solutions including trying a custom firmware are not long-term solutions, you need to fix that board or mine with it this way until it dies completely.
█▀▀▀
█
█
█
█
█
█
█
█
█
█
█
█▄▄▄
▀▀▀▀▀▀▀▀▀▀▀
e
▄▄▄▄▄▄▄▄▄▄▄
██████████████▄
████████████▄███
██▐███████▄█████▀
█████████▄████▀
███▐████▄███▀
████▐██████▀
█████▀█████
███████████▄
████████████▄
██▄█████▀█████▄
▄█████████▀█████▀
████████████▀██▀
████▀█████████▀		▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
c.h.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
▀▀▀█
█
█
█
█
█
█
█
█
█
█
█
▄▄▄█
▄██████▄▄▄
█████████████▄▄
███████████████
███████████████
███████████████
███████████████
███░░█████████
███▌▐█████████
█████████████
███████████▀
██████████▀
████████▀
░▀▀██▀▀
gyw2020 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
September 14, 2020, 03:53:22 PM
 #16
The one that couldnt read the board was solved with custom firmware and the other one after a while drops the hasboard saying read temp error so im going to do as you say and press the heatsinks
Philipma1957cellphone
Full Member
***
Offline Offline

Activity: 416
Merit: 125


View Profile
September 14, 2020, 04:35:07 PM
 #17
Quote from: gyw2020 on September 14, 2020, 03:53:22 PM
The one that couldnt read the board was solved with custom firmware and the other one after a while drops the hasboard saying read temp error so im going to do as you say and press the heatsinks

I suspected  that you would fix one with the firmware. It seems the 17 series has a lot of bad models.
This is philipma1957 alt. Do not conduct business  with this account
gyw2020 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
September 14, 2020, 04:38:16 PM
 #18
yes im not going to buy to bitmain more whatsminer from now on
thierry4wd
Sr. Member
****
Offline Offline

Activity: 446
Merit: 347



View Profile WWW
September 17, 2020, 07:25:31 PM
 #19
Hi, indeed, some firmware can solve some problem, concerning mine, it ignores some functionality and this content to make the miner work as simple as possible with only useful things. did you use mine?
https://www.djayos.com   -----  https://discord.gg/JdQJ77X
gyw2020 (OP)
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
September 17, 2020, 10:08:38 PM
Last edit: September 17, 2020, 11:59:09 PM by frodocooper
 #20
Yes but i had a problem after error: ``warn net lost´´  the miner wont start mining again  something that with stock firmaware not happened now i have stock firmware and all of them working with all boards lets see for how long.
Pages: [1] 2 »  All
  Print  
Bitcoin Forum > Bitcoin > Mining > Mining support > HELP with 2 T17+ :(
 « previous topic next topic »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!