More than 9 5700 xt nitro not working!!!!

[renz.mbisla]

Boot screen not showing when 10 gpu or more. I'm thinking because of the pico psu. I should use 300W pico psu?

Asrock h110 pro btc+
Intel g3930
8gb ram
3 hp platinum server psu 1200W
5700 xt nitro
SMOS in a 32gb flash drive

[1713616625]

1713616625

[1713616625]

1713616625

[1713616625]

1713616625

[philipma1957]

Boot screen not showing when 10 gpu or more. I'm thinking because of the pico psu. I should use 300W pico psu?

Asrock h110 pro btc+
Intel g3930
8gb ram
3 hp platinum server psu 1200W
5700 xt nitro
SMOS in a 32gb flash drive

no just run 9 gpus

It is more important to have gear that runs steady and not to squeeze in as many gppus as you can on a single mining board.

is this your mobo?

https://www.asrock.com/MB/Intel/H110%20Pro%20BTC+

run it with 8 or 9 cards

and just make sure it runs well with the 8 or 9

[renz.mbisla]

Boot screen not showing when 10 gpu or more. I'm thinking because of the pico psu. I should use 300W pico psu?

Asrock h110 pro btc+
Intel g3930
8gb ram
3 hp platinum server psu 1200W
5700 xt nitro
SMOS in a 32gb flash drive

no just run 9 gpus

It is more important to have gear that runs steady and not to squeeze in as many gppus as you can on a single mining board.

is this your mobo?

https://www.asrock.com/MB/Intel/H110%20Pro%20BTC+

run it with 8 or 9 cards

and just make sure it runs well with the 8 or 9

Yes that's my mobo.

• I also tried Biostar TB250-BTC PRO and also failed to get more than 9 GPU.
• Twek BIOS settings.
• Make it 16GB RAM
• Use SSD Windows 10
• PC PSU
• Tested each GPU if it is working properly

I saw others running more than 9 GPUs and also some have issues too.
Maybe I'll consider to add new mobo

[GODLIKEE]

try pcie gen 2

[geck]

we need to have a sticky for this motherboard.

Disable CSM in bios.
Occasionally, if the rig freezes, you will have to remove the cards, go into bios and disable csm again.

[renz.mbisla]

try pcie gen 2

Already tried but still no boot screen showed.

[deadsix]

try pcie gen 2

Already tried but still no boot screen showed.

Switch everything to Pcie Gen1, disable sound, disable onboard video and switch to pcix, turn off unused usb ports and sata ports (if you see the option in your bios).

[dagarair]

There is an issue with 5700 and pulling more than 3.5v out of pci bus.  Your issue is the motherboard.  100%  If there are power plugs on the board and you have not plugged in power then do so.  If you have then its your board. 

In summation your board don't have the nuts to power more than 8-9 if you are lucky.

[renz.mbisla]

JUST DISABLE CSM!