M31S+ 80T - Need measurements

[Texnoz]

Alright so I'm currently looking for some confirmation on Whatsminer M31S+ 80T Length + Width + Height, and the type of PSU, I will attach 2 pictures. There's a lot of mixed feelings because NON of the pictures online really tell the physical look of the miner - and I can't seem to find any youtube videos about this particular miner.

Picture 1 - shows a miner with PSU covering all the way to exhaust fan: https://i.imgur.com/Awe04Zb.png

Picture 2 - shows a miner with PSU not going all the way to exhaust fan: https://i.imgur.com/bsUUhD4.png

Does anyone own or have a whatsminer m31s+ 80T, physically? Could you please take a picture and show me if it's picture 1 or 2 which is the official model.

[philipma1957]

I went to MicroBT.com

they have 2 psu's

https://www.microbt.com/

https://qiniu.microbt.com/uploading/2019-12-24/1014_11:45:07_377c39cc6c6501ac989d5d7193709d2c.jpg

The difference between M30S-88T and M20S-68T is that the power supply is replaced with a flat style, which reduces the height of the whole machine by 15mm, and the weight of the whole machine is 0.9kg lighter than the M20S-68T.

https://qiniu.microbt.com/uploading/2019-12-24/1014_11:52:45_5029946ea49127a50debad582292b221.jpg

flat psu with middle jack for power

https://qiniu.microbt.com/uploading/2019-12-24/1014_11:56:16_2171be799e71b6ff0505cb8049cab0f7.jpg

everyone shows the long flatter psu with power jack in the middle.

https://www.whatsminer.com/mall/BTmall.html?locale=en

So I think. you will get that one.

But knowing asic builders you won't know until you get it.
and some will get the taller shorter psu with the power jack to the upper left.