[OPEN] 5 Gh/s NANO FURY II USB MINER*$49*FREE US SHIPPINIG**

[Swimmer63]

5 Gh/s Nano Fury II USB Bitcoin Miner v0.5

by Moonlight Miner, Design by vs3

Dual Chip Bitfury USB ASIC Miner

MAY SPECIAL - BUY 3 GET 1 FREE AT WWW.MOONLIGHTMINER.COM

5 Gh/s Nano Fury II USB Bitcoin Miner v0.5

by Moonlight Miner, Design by vs3

Dual Chip Bitfury USB ASIC Miner

Specs and Info:

• LOWEST PRICED 5 Gh/s USB MINER AVAILABLE
• NOT a Pre-Order -- In stock for immediate shipment
• Each miner contains TWO Bitfury (Rev.1) ASIC Chips
• Super Easy Install - No additional drivers needed for most computers
• Requires this version of BfgMiner: http://luke.dashjr.org/tmp/code/webisect/webisect.php?dobuild=bfgminer
• Overclockable - speed of 4.7-5.4 Gh/s at 53-55 bits - stability can reduce with increased speed.  3.7-4.1 Gh/s requires 1A(amp), which is slightly more than USB 3.0 standard of .9A
• 5 Gh/s speed needs 1.5-1.8A per device.  It is unlikely you will be able to utilize each port in a powered USB hub.  In tests a 10 port "Juiced Systems" USB 3.0 powered hub ran 4 miners and a USB fan comfortably.
• Miners can exceed 5 Gh/s but have NOT been tested above BfgMiner oscillator settings of 55 bits.  Running at higher speeds may damage the miner and will void the 30 day warranty.
• Light to medium air circulation required for speeds over 3.7-4.1 Gh/s.  USB fans work very well.

Full Image Gallery at http://imgur.com/a/WKycW#0

   


    Pricing:

Can vary with changing exchange rates.
    

• 1-9 Units  - $49.00

       [PRICE DROP]
    

• 10-24 Units - $49.00

       [PRICE DROP]      
    

• 25+ Units - $45.00

              [PRICE DROP]
[/list]


How soon can I get them?        **Ships in 1 Business Day or Less**
 FREE USA Domestic USPS First Class shipping is included.
 USA Domestic FedEx Standard Overnight (where available) is $36 for up to 25 miners.
 
 Promise it will work?:
 All miners are tested twice before they are shipped.  Once by the Developer himself, then again by Moonlight Miner.
 We have a 30 day replacement warranty for each device.  No refunds.  
 Warranty void if overclocked above 55 bits or used without some form of air movement/fan.
  

Who's the Brains behind this?
 Nano Fury is an open source design developed by Bitcointalk.org forum member "vs3."  We encourage BTC donations for the developer at 1AHvViTD5wohPywNYHi8NZ8uPhbY9dZXCY.
 Details of the design, files and questions for the developer can be found at https://bitcointalk.org/index.php?topic=321287.0

How do I buy these?
EDIT - Webstore is now up.  Go to:

http://www.moonlightminer.com

What if I need help?

Info Sheet and Start-up Instructions

We have not tested many hubs conclusively at this point but believe amp capacity to be the only limiting factor.  You can use USB 2.0 or 3.0 hubs.  3.0's typically have greater capacity.  Please refer to this comprehensive list of hubs that been tested: https://bitcointalk.org/index.php?topic=253749.0

The original Nano Fury Open Source thread offers quality community support at https://bitcointalk.org/index.php?topic=321287.0

If you are unable to have your question answered through these resources contact Moonlight Miner Support support@moonlightminer.com

[/list]

[1714166559]

1714166559

[vs3]

There was also a lot of good info in the draft document (I'd say a pretty decent user guide) that was part of the pre-release info (see this post).

[Swimmer63]

There was also a lot of good info in the draft document (I'd say a pretty decent user guide) that was part of the pre-release info (see this post).

OP updated with price drop and revised start up doc that you mention vs3.  Thanks!

Check out the new pricing.

[Swimmer63]

Shipped over 45 in the past 2 days.
They go out the same day when paid before noon Pacific. 

[Swimmer63]

WebStore is now open for all:

http://moonlightminer.com/

Visa, PayPal, Amex are up.  Bitcoin is not working yet.  Tomorrow morning probably.

[Swimmer63]

OP updated with website.  Accepts credit cards, PayPal and BTC!

[Swimmer63]

OP updated with a new link for bfgminer and a new link for revised start up instructions.

[Swimmer63]

Updated OP with an interest count.

[Swimmer63]

Reminder to all to make sure you are only using the OP link for Bfgminer.  Other versions do not work (yet).

[Swimmer63]

Also - if you are interested in the NF6 (11-12 Gh/s)you can order them via our Assembly thread at

https://bitcointalk.org/index.php?topic=545507.0

This is the only way to get a Nano Fury 6 until some in our group start selling them after our assembly service is complete.

We will be closing the group and starting PCB production next week.  Minimum order of 8 required.

Please add any questions to the Assembly thread (not this one) or PM me.  

Thanks!!

[Swimmer63]

MAJOR PRICE DROP TO $49 TO CLEAN OUT INVENTORY.
 

[Swimmer63]

MAY SPECIAL - BUY 3 GET 1 FREE AT WWW.MOONLIGHTMINER.COM

[Swimmer63]

WOW! Way to take advantage of the May Special.

We are busy with final assembly to keep up.  Thanks for your orders!