bitkings
Newbie
Offline
Activity: 56
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2020, 04:10:52 PM |
|
nicehash have a new post. The first actual mining performance was confirmed to be at around 58 MH/s on the DaggerHashimoto algorithm. The miner (mining software) used to perform this test is currently unknown.
Currently known GPU models and its hashrates: MSI GeForce RTX 3070 59.03 MH/S ASUS GeForce RTX 3070 58.56 MH/s GeForce RTX 3070 FE 49.97 MH/s looks a bit low than my expectations. I was expecting around 65 MH/S will have to wait until tomorrow for the drivers to be released to test it out myself. Just tested with NVIDIA RTX 3070, it shows the result of 58MH/S as well..
|
|
|
|
safar1980
Legendary
Offline
Activity: 1848
Merit: 1653
Payment Gateway Allows Recurring Payments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2020, 04:30:14 PM |
|
nicehash have a new post. The first actual mining performance was confirmed to be at around 58 MH/s on the DaggerHashimoto algorithm. The miner (mining software) used to perform this test is currently unknown.
Currently known GPU models and its hashrates: MSI GeForce RTX 3070 59.03 MH/S ASUS GeForce RTX 3070 58.56 MH/s GeForce RTX 3070 FE 49.97 MH/s looks a bit low than my expectations. I was expecting around 65 MH/S will have to wait until tomorrow for the drivers to be released to test it out myself. Just tested with NVIDIA RTX 3070, it shows the result of 58MH/S as well.. How much electricity does a video card consume when mining? I am still disappointed with the result, I expected around 70 megahashes. if this video card does not give a good benefit in power consumption, then nvidia lost to AMD
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1901
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 28, 2020, 10:29:20 PM |
|
can anyone test it with GPU underclock / oc to see what is the limit with ethereum mining maybe even try to use afterbuner perf/power editing and try lover voltage with max GPU OC by pressing : Ctrl + F and locking minimal voltage on list with select and press L then pushing whole OC up till GPU can handle it
|
|
|
|
sakmsb (OP)
Jr. Member
Offline
Activity: 121
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 06:46:41 AM |
|
can anyone test it with GPU underclock / oc to see what is the limit with ethereum mining maybe even try to use afterbuner perf/power editing and try lover voltage with max GPU OC by pressing : Ctrl + F and locking minimal voltage on list with select and press L then pushing whole OC up till GPU can handle it
Waiting for official drivers to be released. I have this card set up on my mining rig.
|
|
|
|
crazydane
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 07:34:13 AM Merited by vapourminer (1) |
|
My 5700XT's do 57 MH/s and consume 110 watts (core). Power at the wall is about 35% higher (to account for VRAM and various other components on the GPU card). So a grand total of about 150 watts.
Given that the 5700XT can be had for around $400, it makes it a much better deal than the 3070 for mining (at least for ETH) and I bet the power efficiency is also better.
What I'm really looking forward to, is the hashrate / efficiency of the 6800XT, which claims 50% better power efficiency compared to the 5700XT series. Based on the announcement yesterday, the cost will be $649 and will be available on November 18th. It trades blows with the 3080, so I expect around 100 MH/s and less than 200 watts of power.
|
|
|
|
sakmsb (OP)
Jr. Member
Offline
Activity: 121
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 08:08:24 AM |
|
My 5700XT's do 57 MH/s and consume 110 watts (core). Power at the wall is about 35% higher (to account for VRAM and various other components on the GPU card). So a grand total of about 150 watts.
Given that the 5700XT can be had for around $400, it makes it a much better deal than the 3070 for mining (at least for ETH) and I bet the power efficiency is also better.
What I'm really looking forward to, is the hashrate / efficiency of the 6800XT, which claims 50% better power efficiency compared to the 5700XT series. Based on the announcement yesterday, the cost will be $649 and will be available on November 18th. It trades blows with the 3080, so I expect around 100 MH/s and less than 200 watts of power.
6800XT would not be 100 MH/S on ETH. I guess 70-75 MH/S would be achievable by OCing.
|
|
|
|
sakmsb (OP)
Jr. Member
Offline
Activity: 121
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 01:56:50 PM Last edit: October 29, 2020, 02:49:28 PM by sakmsb Merited by vapourminer (1), safar1980 (1) |
|
First impressions pretty disappointing:-
Ethereum Phoenix Miner 5.1c:-
Stock :- 51.9 MH/S at 190 W
-250/+750 TDP 75 :- 57.8 MH/s at 200 W
-250/+1000 TDP 75 :- 59.8 MH/s at 200 W
-250/+1250 TDP 75 :- 61.8 MH/s at 200 W
Raven KawPow GMminer 2.29:-
Stock :- 25.9 MH/S at 255 W
+100/+750 TDP :- 28.9 MH/S at 270 W
Zano ProgPowz GMminer 2.29:-
Almost Same hashrates as Raven KawPow
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1901
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 02:04:30 PM |
|
Do not do minus on GPU core you need to lover voltage at MAX, it can be hard, as I said use afterbuner open graph with: ctrl+f select lowest voltage point with mouse and click L (key) lock voltage, then you can push some OC to GPU at same minimum voltage if ETH need more GPU power
monitor hashrate and frequency, more undervolt can be tested wit nvinspector but I am not sure if it works on 3xxx series
You can even try PL to 60% + GPU oc +100, but best would be if you could drop GPU voltage at minimum
|
|
|
|
whoisthismanoO
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 02:32:08 PM |
|
Yeah, sakmsb, dont set "-" to GPU and fix the Voltage
|
|
|
|
safar1980
Legendary
Offline
Activity: 1848
Merit: 1653
Payment Gateway Allows Recurring Payments
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 03:30:41 PM |
|
sakmsb, thanks for your test. Now I'm definitely not going to buy this video card for mining. In Russia, the price of this video card in stores today is 740-760 dollars(Depending on manufacturer and model). AMD will retain leadership in Ethereum mining. I do not understand why when the TDP value decreases, energy consumption does not drop.
|
|
|
|
Metroid
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
First impressions pretty disappointing:-
Ethereum Phoenix Miner 5.1c:-
Stock :- 51.9 MH/S at 190 W
-250/+750 TDP 75 :- 57.8 MH/s at 200 W
-250/+1000 TDP 75 :- 59.8 MH/s at 200 W
-250/+1250 TDP 75 :- 61.8 MH/s at 200 W
Raven KawPow GMminer 2.29:-
Stock :- 25.9 MH/S at 255 W
+100/+750 TDP :- 28.9 MH/S at 270 W
Zano ProgPowz GMminer 2.29:-
Almost Same hashrates as Raven KawPow
Thanks, like I said before, no different than rx 5700 and like i said many times, 3070 is a failure in games and mining, 3070 is already doa.
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
philipma1957
Legendary
Offline
Activity: 4242
Merit: 8494
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 04:14:24 PM |
|
First impressions pretty disappointing:-
Ethereum Phoenix Miner 5.1c:-
Stock :- 51.9 MH/S at 190 W
-250/+750 TDP 75 :- 57.8 MH/s at 200 W
-250/+1000 TDP 75 :- 59.8 MH/s at 200 W
-250/+1250 TDP 75 :- 61.8 MH/s at 200 W
Raven KawPow GMminer 2.29:-
Stock :- 25.9 MH/S at 255 W
+100/+750 TDP :- 28.9 MH/S at 270 W
Zano ProgPowz GMminer 2.29:-
Almost Same hashrates as Raven KawPow
Thanks, like I said before, no different than rx 5700 and like i said many times, 3070 is a failure in games and mining, 3070 is already doa. Yep pretty much not worth it.
|
|
|
|
sakmsb (OP)
Jr. Member
Offline
Activity: 121
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 04:19:09 PM |
|
sakmsb, thanks for your test. Now I'm definitely not going to buy this video card for mining. In Russia, the price of this video card in stores today is 740-760 dollars(Depending on manufacturer and model). AMD will retain leadership in Ethereum mining. I do not understand why when the TDP value decreases, energy consumption does not drop.
Yes, even I don't under that. Will try to undervolt as others suggested.
|
|
|
|
Metroid
Sr. Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 2142
Merit: 353
Xtreme Monster
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 04:52:38 PM |
|
|
BTC Address: 1DH4ok85VdFAe47fSVXNVctxkFhUv4ujbR
|
|
|
sakmsb (OP)
Jr. Member
Offline
Activity: 121
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 05:22:25 PM |
|
Do not do minus on GPU core you need to lover voltage at MAX, it can be hard, as I said use afterbuner open graph with: ctrl+f select lowest voltage point with mouse and click L (key) lock voltage, then you can push some OC to GPU at same minimum voltage if ETH need more GPU power
monitor hashrate and frequency, more undervolt can be tested wit nvinspector but I am not sure if it works on 3xxx series
You can even try PL to 60% + GPU oc +100, but best would be if you could drop GPU voltage at minimum
Will try to undervolt and post back results.
|
|
|
|
alucard20724
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 06:14:05 PM Last edit: October 29, 2020, 06:39:40 PM by alucard20724 |
|
First impressions pretty disappointing:-
Ethereum Phoenix Miner 5.1c:-
Stock :- 51.9 MH/S at 190 W
-250/+750 TDP 75 :- 57.8 MH/s at 200 W
-250/+1000 TDP 75 :- 59.8 MH/s at 200 W
-250/+1250 TDP 75 :- 61.8 MH/s at 200 W
Raven KawPow GMminer 2.29:-
Stock :- 25.9 MH/S at 255 W
+100/+750 TDP :- 28.9 MH/S at 270 W
Zano ProgPowz GMminer 2.29:-
Almost Same hashrates as Raven KawPow
Thanks, like I said before, no different than rx 5700 and like i said many times, 3070 is a failure in games and mining, 3070 is already doa. Yep pretty much not worth it. I don't know about that just yet. at stock clocks with power set to 50% in after burner, i'm getting 51.2 mhash/s @ 105 watts on the wattmeter for the GPU.. i haven't oc memory yet. I have the 3070 FE edit: fresh install win10. 457.09 drivers. amd 3600 cpu stock. 16gb ddr4 2666 mem @47 watt system draw msi af 4.6.2 .. 155 watt total system draw under load. measurements on Kill A WATT meter. Phoenix miner 5.1c stock clocks 51.2 mhash/s @ 50% msi. 108 watts for gpu. mem +500 55.28 mhash/s @ 50% msi. 108 watts for gpu. mem +1000 58.4 mhash/s @ 50% msi. 108 watts for gpu. mem +1250 59.08 mhash/s @ 50% msi. 108 watts for gpu.
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1901
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 06:27:15 PM Last edit: October 29, 2020, 06:40:17 PM by reb0rn21 |
|
If it hash 52Mhs at 50% TDP just push memory 1000 -1250+ and try to push later some GPU OC if it can/need
also check GPU clock while mining
@alucard20724
try 50-100+ OC on GPU if it does not crash miner... memory at 1250 not big benefit looks like more GPU clock is needed
|
|
|
|
alucard20724
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 06:45:03 PM |
|
If it hash 52Mhs at 50% TDP just push memory 1000 -1250+ and try to push later some GPU OC if it can/need
also check GPU clock while mining
@alucard20724
try 50-100+ OC on GPU if it does not crash miner... memory at 1250 not big benefit looks like more GPU clock is needed
mem +1250 59.08 mhash/s @ 50% msi. 108 watts for gpu. gpu clock sits around 600MHz on gpuz while mining, and increases to 1100-1700 while creating the dag file. I have the gpu at stock clocks. gpuz says the mem clock is @2013.0 (I have +1250 on msi ab). I'm more concerned with efficiency +50 on gpu clock didn't seem to change anything. same for +100.
|
|
|
|
reb0rn21
Legendary
Offline
Activity: 1901
Merit: 1024
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 06:51:08 PM |
|
yeah issue is you can`t control clock at voltage, ideal you would find lowest clock needed for 60Mhs and set it and drop voltage at minimum for it
one option is aftrburnel freq/volt editing but it might not have option to undervolt it at that range
|
|
|
|
alucard20724
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
October 29, 2020, 06:53:02 PM |
|
If it hash 52Mhs at 50% TDP just push memory 1000 -1250+ and try to push later some GPU OC if it can/need
also check GPU clock while mining
@alucard20724
try 50-100+ OC on GPU if it does not crash miner... memory at 1250 not big benefit looks like more GPU clock is needed
mem +1250 59.08 mhash/s @ 50% msi. 108 watts for gpu. gpu clock sits around 600MHz on gpuz while mining, and increases to 1100-1700 while creating the dag file. I have the gpu at stock clocks. gpuz says the mem clock is @2013.0 (I have +1250 on msi ab). I'm more concerned with efficiency +50 on gpu clock didn't seem to change anything. same for +100. my incorrect shares went up dramatically with the + 1250 putting mem back to +1000 and gpu back to stock.. accepted shares back to normal
|
|
|
|
|