3070 Gigabyte Hashrates thread(Pretty Disappointing)

[reb0rn21]

bad shares i bet are due memory OC, if its GPU miner would crash

[1715586600]

1715586600

[Metroid]

edit:  fresh install win10.  457.09 drivers.  amd 3600 cpu stock. 16gb ddr4 2666 mem @47 watt system draw  msi af 4.6.2 .. 155 watt total system draw under load.   measurements on Kill A WATT meter.
Phoenix miner 5.1c
stock clocks   51.2 mhash/s @ 50% msi.    108 watts for gpu.
mem +500  55.28 mhash/s @ 50% msi.    108 watts for gpu.
mem +1000  58.4 mhash/s @ 50% msi.    108 watts for gpu.
mem +1250  59.08 mhash/s @ 50% msi.    108 watts for gpu.

Thanks! these are really good numbers!

$500 dollar and same as rx 5700, better wait few days and get a 6800 for $579, likely be sold for $549, will be a lot better than the 3070, trust me.

[alucard20724]

edit:  fresh install win10.  457.09 drivers.  amd 3600 cpu stock. 16gb ddr4 2666 mem @47 watt system draw  msi af 4.6.2 .. 155 watt total system draw under load.   measurements on Kill A WATT meter.
Phoenix miner 5.1c
stock clocks   51.2 mhash/s @ 50% msi.    108 watts for gpu.
mem +500  55.28 mhash/s @ 50% msi.    108 watts for gpu.
mem +1000  58.4 mhash/s @ 50% msi.    108 watts for gpu.
mem +1250  59.08 mhash/s @ 50% msi.    108 watts for gpu.

Thanks! these are really good numbers!

$500 dollar and same as rx 5700, better wait few days and get a 6800 for $579, likely be sold for $549, will be a lot better than the 3070, trust me.

True.  but you never know til you try.
This is just a quick tweak too... but it's a good beginning reference for everyone to make their own decision.  fyi.. I have 10 5700XT and twenty 5700.  will get the 6800/6900 when they come out too.

[sakmsb]

Unable to successfully undervolt.

@TDP 45

0 Core/+1300 Memory

61.1 MH/S with miner showing 122W

[alucard20724]

Unable to successfully undervolt.

@TDP 45

0 Core/+1300 Memory

61.1 MH/S with miner showing 122W

how are you rejects?  I started to get a lot of rejects with +1250 with my card.  I haven't started with the girlfriend's card yet... same card though.  one per person at MicroCenter.. i asked. 

[sakmsb]

Unable to successfully undervolt.

@TDP 45

0 Core/+1300 Memory

61.1 MH/S with miner showing 122W

how are you rejects?  I started to get a lot of rejects with +1250 with my card.  I haven't started with the girlfriend's card yet... same card though.  one per person at MicroCenter.. i asked. 

Getting a few incorrect shares, clocked down to +1200 and will observe.

[gagux123]

(...)

wow, thanks for sharing, these are interesting numbers!
Could you tell us what model of video card you have? 5700 xt Sapphire Nitro? MSI?
Did you make BiosMod?
Thanks

[sakmsb]

(...)

wow, thanks for sharing, these are interesting numbers!
Could you tell us what model of video card you have? 5700 xt Sapphire Nitro? MSI?
Did you make BiosMod?
Thanks

My Sapphire Nitro+ gives same hash rates, MSI gives 55.6 and XFX 55.5.

Bios modded and editing the Voltage to min 725 and Max frequency to 1k, should do the trick.

I have still been unable to mod GIGABYTE 5700XTs Rev 2. Tried couple of times and bricked the card. Luckily was able to re-flash to stock bios.

[crazydane]

(...)

wow, thanks for sharing, these are interesting numbers!
Could you tell us what model of video card you have? 5700 xt Sapphire Nitro? MSI?
Did you make BiosMod?
Thanks

One rig has 4 Sapphire Pulse cards and yes, all are bios modded.  Each card has its own personality as far as how low I can bring the power before it starts to fall over.  Same with mem clock.

Snippet from miner:

--- cut ---
GPU1: 56C 0% 107W, GPU2: 54C 0% 118W, GPU3: 56C 0% 125W, GPU4: 53C 0% 110W
GPUs power: 460.0 W
Eth: New job #f6c355f9 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 228.349 MH/s, shares: 211/0/0, time: 1:10
GPUs: 1: 55.827 MH/s (55) 2: 58.431 MH/s (48) 3: 57.689 MH/s (52) 4: 56.402 MH/s (56)
Eth: New job #54cf98c0 from us1.ethermine.org:4444; diff: 4000MH
Eth: GPU2: ETH share found!
Eth: Share actual difficulty: 9547 MH
--- cut ---

Other rig has 2 ASRock cards in it:

--- cut ---
GPU1: 61C 0% 124W, GPU2: 57C 0% 124W
GPUs power: 248.0 W
Eth: New job #374067a7 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #7da8fbc4 from us1.ethermine.org:4444; diff: 4000MH
Eth: New job #2d3c8226 from us1.ethermine.org:4444; diff: 4000MH
Eth speed: 113.117 MH/s, shares: 9570/0/9, time: 95:42
GPUs: 1: 56.109 MH/s (4718/5) 2: 57.009 MH/s (4852/4)
--- cut ---

My AMD rigs are running plain Ubuntu 20.04 distro controlled by Awesome Miner.

[vrottenberg]

Nvidia 3070 is capable of delivering 64 Mh/s on the Ethash algorithm with a consumption of only ~ 120 watts

[safar1980]

Nvidia 3070 is capable of delivering 64 Mh/s on the Ethash algorithm with a consumption of only ~ 120 watts

I think it will work at maximum overclocking and it is not full power consumption. The program only shows the consumption of the core, not the memory and fans.
what is 3070 FE? I did not find information what does FE mean.

[sakmsb]

Nvidia 3070 is capable of delivering 64 Mh/s on the Ethash algorithm with a consumption of only ~ 120 watts

I think it will work at maximum overclocking and it is not full power consumption. The program only shows the consumption of the core, not the memory and fans.
what is 3070 FE? I did not find information what does FE mean.

FE = Founders Edition, the Nvidia's own card

[sakmsb]

TDP 50, Custom Core(undervolted)/+1200 seems stable without any incorrect/reject shares.

61.4 MH/S with 122 W -- This is the best I am able to get. Anyone else got any better results?

GPU 4 in the screenshot is 3070


2012 gti quarter mile

[reb0rn21]

Speed is more or less good, but POWER could be dropped more issue is just you have no control over it

What happen if you drop PL to 30-45% range does card crash or GPU freq or memory freq crash?

 

[sakmsb]

Speed is more or less good, but POWER could be dropped more issue is just you have no control over it

What happen if you drop PL to 30-45% range does card crash or GPU freq or memory freq crash?

 

Going below Power Limit 50 is dropping the hash rates and too much GPU freq instability.

Increasing Memory above 1200 is resulting in high reject/incorrect.

[Grim]

Speed is more or less good, but POWER could be dropped more issue is just you have no control over it

What happen if you drop PL to 30-45% range does card crash or GPU freq or memory freq crash?

 

What determines lowest possible voltage?
Is it the voltage regulation chips limit or "just" a software/bios limit?!

Of course you would need to lower core clock as well, before your OS loads the driver. (bios mod or registry mod)

Anyone ever explored hardware mods to LOWER voltage? eg. resistors

[reb0rn21]

Issue you can not know as GPU do not crash but driver drop freq as insane ....... you have NVinspector to set manual voltage but I think as its old it do not work on 3xxx
Afterburned dev unwinder from guru3d forum know more but he only allow OC control what he is told by Nvidia

[alucard20724]

Speed is more or less good, but POWER could be dropped more issue is just you have no control over it

What happen if you drop PL to 30-45% range does card crash or GPU freq or memory freq crash?

 

Going below Power Limit 50 is dropping the hash rates and too much GPU freq instability.

Increasing Memory above 1200 is resulting in high reject/incorrect.

My second card i can only set the power limit to 55.  at 55 i get 59 mhash with +1000 mem.  if i reduce the power limit below that, hash rate drops significantly.

[rdluffy]

Wow, a XX70 series of Nvidia that does not make sense 

The prices here of 3070 are almost the same as RTX 3080 at launch, and looking the performance on games and now at mining, it's not a a sweet spot to buy like 970, 1070 and 2070
With RX 6800 and XT this model will have to be at a good price to sell

I expect a little more hashrate, but thinking about mining only, it's way better to buy a 5700 to do 54Mhs consuming 130 or 140w and the card is easy to find

Talking more about 3070, which model of cards are you using to post these hashrates?
With updates on miners app, and drivers, maybe the hashrate can be better

[sakmsb]

Wow, a XX70 series of Nvidia that does not make sense  

The prices here of 3070 are almost the same as RTX 3080 at launch, and looking the performance on games and now at mining, it's not a a sweet spot to buy like 970, 1070 and 2070
With RX 6800 and XT this model will have to be at a good price to sell

I expect a little more hashrate, but thinking about mining only, it's way better to buy a 5700 to do 54Mhs consuming 130 or 140w and the card is easy to find

Talking more about 3070, which model of cards are you using to post these hashrates?
With updates on miners app, and drivers, maybe the hashrate can be better

Even if mining software update the application, how much can we expect more, may be 2 to 3 MH/s more.

Mine is Gigabyte OC card. And, I'm not happy and trying to sell this off already LOL.

Waiting for AMD 6xxx series to be out n make us miners happy