DragonMint T1 hardware reset issue

[erfaniranmehr]

"DragonMint T1 hardware reset issue"

Hello,

I have an DragonMint T1 that hacked by some anonymous with IP range!! who has hacked my miner, change the root password (before this happened, unfortunately I used the default password that was "admin" or "dragonadmin" or "innoadmin") now I don't know how I can reset my miner to fix my workers at pools;

Also I tried this ways but I couldn't reset my miner (just I can see my miner's ip changed sometime after I try some of these ways, just it!):
1_ I press ip set button for 1-5 second / 5-15 second / 15-30 second
2_ I press reset button for 1-5 second / 5-15 second / 15-30 second
3_ I press both of them for 1-5 second / 5-15 second / 15-30 second
4_ my control board doesn't have any SD/TF memoly slot!

I'm so disappointed 
Please help if you know how, Thanks.

[BitMaxz]

Can you try to disassemble the control board to check maybe the SD card slot is inside?

In case if it's there, Braiins OS is the only firmware that I know you can flash it through an SD card but it seems Dragonmint is no longer supported by Braiins OS.

However, I found a link from Github fork that I think still has the SD card firmware that you can use to flash this miner.

Here's the Github link.
-https://github.com/KoreNBeatZ/braiins-os/blob/master/docs/index.md


And here's the source where you can get the firmware image for the SD card.
- https://feeds.braiins-os.org/

The guide on how to flash this miner must be included from the Github link above.

If it doesn't have an SD card inside well there's no way to reflash the miner or you might end up using a Jtag to flash the whole control board.

[tynew240]

I know it's been over a year but did you ever get it figured? I just got a used dragonmint and can't reset it I've tried everything.

[ravenboycrypto]

I saw your message about the t1. I had the same problem. I was able to reset by first hiteing and holding the reset ip button for 5 seconds releasing then hitting the reset for 5 seconds. Hope this works for you!