What speed is your 1080ti running? (EThash)

[FloppyPurpleGherkin]

I'm getting 46-47mh currently.

It's a shame nVidia never released a DAG patch like AMD did, If that were the case these would still be at 55mh 

[geo25]

I am getting about 52mh.

[sairog]

I am getting about 52mh.

how? which miner/clocks/voltages?

[geo25]

Smos. Bminer. 70 core 1000mem 280 power

[geo25]

This week I have a lot of restarts I am trying to find the reason  I was stable about 6 months.

[NisamRobot]

49-50MHs, 925mV, 1950 MHz Core. Miner reports ~200W

[bmoscato]

This week I have a lot of restarts I am trying to find the reason  I was stable about 6 months.

Are you mining against NiceHash?

[philipma1957]

This week I have a lot of restarts I am trying to find the reason  I was stable about 6 months.

Are you mining against NiceHash?

Nice hash has sucked so much I moved all gear to viabtc.

[bmoscato]

This week I have a lot of restarts I am trying to find the reason  I was stable about 6 months.

Are you mining against NiceHash?

Nice hash has sucked so much I moved all gear to viabtc.

I concur, I'm mining on Ethermine.

[Wotan Wipeout]

Typical Hashrate ETH for 1 1080ti is 47-52 Mhash, 180 - 240 Watt.
Heat is a problem, so bigger 1080tis with higher boost and lower temps are better than founders editions...

[socks435]

49-50MHs, 925mV, 1950 MHz Core. Miner reports ~200W

Do you mind sharing the latest hashrate this month?
Or it drops a bit to 47mh/s or lower?

Are you running it on Windows OS or Linux?

[mak013]

47-49MH. 120/1000/200. Last month hashrate slowly falling. A month ago it was the same hashrate, buy it was 110/1000/180. When it falls 1-2MH i increase power consumption and core clock.

[socks435]

47-49MH. 120/1000/200. Last month hashrate slowly falling. A month ago it was the same hashrate, buy it was 110/1000/180. When it falls 1-2MH i increase power consumption and core clock.

What miner you talking about?
is it the Bminer or trex miner or phonenix?

I can only reach 44mh/s with trex and 41-42mh/s with phoenixminer. I can't make the Bminer always invalid seed when running it with hiveos.

[black1ight]

My settings for 1080 TI's range from

Core clock : + 50 to +100
Memory clock: +350 to +550
Power limit : 81% to 84%
Gpu power consumption : 200 to 230 watts

And get 45 to 46 mhs on phoenix miner with straps 2

[dalllas]

My EVGA 1080TI settings:

Core clock : +140
Memory clock: +600
Power limit : 75%
Gpu power consumption : 185W

NBminer (activated -mt settings) = 47MH/s (sometimes 55MH/s for a while)

In contrast of old and cheap RX470 8GB on PhoenixMiner = 32MH/s with 85W power consumption. 

[geck]

I'm run my cards at +200 core, -1000 mem, 800mV (130-145W). Speeds are on average 41MH

[Greatdev]

Typical Hashrate ETH for 1 1080ti is 47-52 Mhash, 180 - 240 Watt.
Heat is a problem, so bigger 1080tis with higher boost and lower temps are better than founders editions...

Founders edition are mostly bad for mining because the design carries only single fan, they have bad heat sync due to less fans, the best graphics cards for mining must have three fans to get rid of heats very easily

[FP91G]

Smos. Bminer. 70 core 1000mem 280 power

How much extra power does your video card consume for an increase of 5 megahash? 
Do you have cheap electricity?

[arielbit]

just run it efficient and add some gpus

let's say your have 50 1080ti's at 46MH = 2.3GH ...if you are happy with your current profitability and then they lost 2MH each, then you are at 2.2GH..solution: add a 3080 or a 3090 and then you are back to 2.3GH, this way you might want to try your next brand/model of gpus that you will upgrade to before buying in bulk 

you can add piece by piece and you can sell piece by piece..

but if you made a lot of money due to bear market patience and trading then just put them all in a box and replace them all with 3090s/3080s ...unless you choose to be more exposed to coins, betting it will go a lot more higher.

[mak013]

47-49MH. 120/1000/200. Last month hashrate slowly falling. A month ago it was the same hashrate, buy it was 110/1000/180. When it falls 1-2MH i increase power consumption and core clock.

What miner you talking about?
is it the Bminer or trex miner or phonenix?

I can only reach 44mh/s with trex and 41-42mh/s with phoenixminer. I can't make the Bminer always invalid seed when running it with hiveos.

Phoenix 5.4c. I haven`t tested 1 rig at pool, but somebody says that phoenixminer show hashrate more then real, about 1-2MH. If you want and have opportunity - you can test different miners with one rig and one pool and compare the results.