Hello!
I really need help with the black box (I have 3 of them).
I tried to flash one with this firmware
https://download.canaan-creative.com/avalon921/openwrt/latest/h3/,
openwrt-sunxi-cortexa7-device-sun8i-h2-plus-vidtoo-model-aHere is a photo of a web page with firmware
https://ltdfoto.ru/image/kglV8loading went and after silence, then there were only blinking of the diodes of the network board even with the cable disconnected (there is a blinking frequency). I tried to flash the firmware below as I saw the inscription Vidtoo H2 on one of the pages.
https://ltdfoto.ru/image/kdq9jhttps://ltdfoto.ru/image/kgAZihttps://ltdfoto.ru/image/kdYiVI sent a photo of the board to my friend, he said that when searching, rpi3 comes out, and said that you need to flash mm, after the mm firmware the connection did not disappear, I thought everything was fine and then I stitched it with the link below
https://download.canaan-creative.com/avalon921/openwrt/latest/rpi3-modelb/,
openwrt-brcm2708-bcm2710-raspberrypi-3-rootfsafter which I received a box with the same condition as the first, I'm afraid to touch the third box.
I PLEASE HELP WITH THE RESTORATION OF THE BLACK BOXES AND THE CORRECT FIRMWARE OF THE THIRD BOX UNDER AVALON 921 (VALID FIRMWARE FOR AVALON 8 SERIES).