Dual mining ETH +

[mrbugera2]

i mined a sia coin in the past...

and now what coin you advise with eth?

[mrbugera2]

if any one had done, dual mining now, help me to config it with poloniex miner.. i tried but couldn't

i started with verge, but couldn.t find its best pool to mine, and also in miner it had 0 hash

need ETH + something..

i also found way to mine, but it had dual miner pool.. not seperatly

[rdluffy]

I doesn't worth to dual mine at the moment, you'll only spend more electricity and make your card produce more heat

In the beginning, when Claymore did dual mine on his program, it was good, we mined Decred or Sia with good profits, nothing huge, but a good extra
And now these coins are mined by asics, and our cards have a small reward compared to asics


Another thing to consider is the Claymore program, it's not updated anymore, and it's time to move to more optimized miners like Phoenix, lolminer, or any other that is updating regularly

[mrbugera2]

yes you are right.. but i still want to mine with dual mining.

i am using now phoenix miner, but i couldn't setup dual mining config, like as it said it supports only blake2s coins for example verge..

but i couldn't find or add it to its pool..

[rdluffy]

yes you are right.. but i still want to mine with dual mining.

i am using now phoenix miner, but i couldn't setup dual mining config, like as it said it supports only blake2s coins for example verge..

but i couldn't find or add it to its pool..

Ok, no problem
Phoenix Miner only dual mine with Blake2s

You can put on your bat file: (source: https://bitcointalk.org/index.php?topic=2647654.0)
PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal YourBtcWalletAddress -pass x -proto 4 -stales 0 -dpool blake2s.eu.nicehash.com:3361 -dwal YourBtcWalletAddress -dcoin blake2s

The -pool command is the adress and port of first coin, ETH for example
-wal is the wallet of ETH
-pass is your password

-dpool is the adress and port of your secondary coin, -dwal is the wallet of second coin, and don't touch the another command -dcoin

I found this pool that is active with mining Verge: https://www.mining-dutch.nl/?page=pools

[mrbugera2]

this is will be my bat file:

PhoenixMiner.exe -pool eu1.ethermine.org:4444 -wal my eth adress -pass x -proto 4 -stales 0 -dpool blake2s.mining-dutch.nl:6671 -dwal myminingdutchwalletusername -dcoin blake2s

i started and here what i got: 0 MHS.

i checked in mining dutch website with my walletusername and it shows me active but with 0MHS

[miner29]

ive answered this...you are not going to earn anything trying to mine against much higher hashrate asics.  You literally need x100 your hash to make less than a penny a day.

[mrbugera2]

it is just a test, to run with no problems and then i will add to my other miner rigs..

[mrbugera2]

ive answered this...you are not going to earn anything trying to mine against much higher hashrate asics.  You literally need x100 your hash to make less than a penny a day.

if you can help go ahead.. thanks for advise

[nbminer]

You could always try mining ZIL + ETH/ETC

There's a calculator here : https://ezil.me/

and instructions here : https://ezil.me/start

[miner29]

ive answered this...you are not going to earn anything trying to mine against much higher hashrate asics.  You literally need x100 your hash to make less than a penny a day.

if you can help go ahead.. thanks for advise

You dont seem to understand...you cant generate enough hash to get any shares on the blake2s pool.  You are 2 magnitudes below the  minimum needed.....and that is less than a penny a day.

You have 82,000,000 hash....you need more like 10,000,000,000 to even mine a penny a day.  You have 0.082ghs.....the second number that makes $0.01 a day before power is 10.0ghs... so 100 rigs like yours would make less than 1 penny a day about $0.008 thats why all you see is 0....   



Its a scale problem.  Not trying to be funny trying to explain...you would literally need 100X your system to see anything...depending on pool it might even take quite a bit more. 

Zil is possible to dual mine but it only mines a little bit every so often.  Not like being able to mine Eth/DCR or other duals back in the day. 

[mrbugera2]

You could always try mining ZIL + ETH/ETC

There's a calculator here : https://ezil.me/

and instructions here : https://ezil.me/start

yes but i want that zil to be in different pool, without eth, i am mining eth on ethermine..
do you know how to do that? thanks for your reply

miner29 ok

[safar1980]

Dual mining is beneficial only in ZIL + ETC mode on 4GB video cards. With high rewards for the Ethereum block, it is better not to mine ZIL + ETH.

mrbugera2
PHOENIX
EthDcrMiner64.exe -epool eu-zil.rustpool.xyz:8008 -ewal ETH_WALLET -epsw ZIL_WALLET@eu1.ethermine.org:4444@4G -eworker fFARM -allpools 1 -allcoins 1

https://zil.rustpool.xyz/

[mrbugera2]

Dual mining is beneficial only in ZIL + ETC mode on 4GB video cards. With high rewards for the Ethereum block, it is better not to mine ZIL + ETH.

mrbugera2
PHOENIX
EthDcrMiner64.exe -epool eu-zil.rustpool.xyz:8008 -ewal ETH_WALLET -epsw ZIL_WALLET@eu1.ethermine.org:4444@4G -eworker fFARM -allpools 1 -allcoins 1

https://zil.rustpool.xyz/

i have made it but in pool there is 0MHS..

1) its good to stay on ethermine
2) lets see after 24 hours if pool writes something..

[mrbugera2]

everything is ok,

i have confugered on 3 rig

1) rx580 3x - eth hash (80mhs)
2) asus 1070 6x - eth hash (180mhs)
3) asus 1070 6x - eth hash (180mhs)

i am mining eth on ethermine and zilla on ruspool..
on rustpool it says that i have a 400mhs and all 3 workers are making 15, 17, 17 shares

i have a question why there is no difference between my (80mhs) rig and (180mhs) rig? why are they making almost same shares.. do i have to add something to my bat file in config?

i have a same bat file on 3 rigs and i think that i have to add or change some command to my 180mhs rigs to get more shares for zilla.. here is my config file:

Phoenixminer.exe -epool eu-zill.rustpool.xyz:8008 -ewal (myethadress) -epsw (myzilladress)@eu1.ethermine.org:4444@4g -eworker (myusername) -allpools 1 -allcoins 1

and here is the creens of my 180mhs rigs and there is said maximum eth difficulty are differents

https://ibb.co/0QW6Dbq
https://ibb.co/W3d8StN

[miner29]

Its becuase zil isnt mined at all time the rig is running.  Zil is only being mined for a minute ever hour or two.

Based on my calculations it costs ETH profits to mie Zil.

[CashbackLover]

I don't dual mine anymore because its not worth it anymore unlike few years back, you will be wasting electricity for nothing, but if you can find good mining calculator sometimes dual mining will be profitable and sometimes it won't, in 2017 it's more stable to do dual mining

[JeotQ]

Zilliqa and decred still allows dual mining but it's been long since I see this working and after looking into popular crypto calculators I see that dual mining isn't Profitable for now, mining Ethereum only will do you right than dual mining with other coins, mining ETH with ZIL will hurt the ETH ROI

[rig4hodlers]

i mined a sia coin in the past...

and now what coin you advise with eth?

Based on my mining experience during the last 3 years and the electricity price costs where I live, we have stopped 'dual mining' long time ago. We were mining decred + eth but it was not profitable on any cases. I suppose that for these people who has no electricity costs associated, it is a very nice option because the eth mh/s are quite similar when you are doing 'dual mining' comparing with 'only eth mining'.
In case you have no electrocoty costs and it is profitable for you, I recommend you move forward with eth+ DCR. Good luck!

[mrbugera2]

thanks for your reply..

now i am using phoenix miner and ethermine for eth..

can you show me how to mine dcr and eth? thanks