Best overclock settings for RX580 8GB

[cryptominersl]

Hi all,
can anyone suggest me (best to do miner) what is the best overclock settings for RX 580 8GB mining.i am using nisehash.

[1714709381]

1714709381

[1714709381]

1714709381

[1714709381]

1714709381

[1714709381]

1714709381

[1714709381]

1714709381

[1714709381]

1714709381

[ummasek]

My best is 1100 core and 2050 memclock.
Bios mode or -strap 1 in phoenix and You`ll get 29.9-30.5Mhash.
It`s power setting`s. Somme gpu`s can handle it at 750mv, somme at 850(samsung hynix memory)

[Maxstl007]

My own best settings for rx580 is cclock @ 1130 and clock 2200, the mvddc should be right at 850 and the cvddc should be at 850, this is overclocking and undervolting your gpu and it should output 30mh/s, though Hynix is different from Samsung memory, you gotta find that perfect spot

[darbaslt]

My sapphire Nitro+ rx580 8gb running on 32,6 mhs with 1200/2200 890mv ~100w from wall.

[batsonxl]

My sapphire Nitro+ rx580 8gb running on 32,6 mhs with 1200/2200 890mv ~100w from wall.

how people can go so down. my some cards even dont down after 940mv. core voltage doing 880mv but it doesnt effect consumption but memory voltage effects alot. as soon as i give 920mv on memory then after couple hours crash. and also with 940mv i cant go up 2070mhz it will crash, how people cards stays stable on 2200mhz?
Ofcourse miner showing very less 66w-78w.

[FP91G]

cclock 1120
clock 2100
mvddc 900-950
There are no perfect settings for all graphics cards
You will have to choose those settings at which your farm works stably, this can only be achieved empirically.

[Eco_111]

Hi all,
can anyone suggest me (best to do miner) what is the best overclock settings for RX 580 8GB mining.i am using nisehash.

You have to find a perfect spot for your own gpu because there is no perfect settings for a gpu, they are different even if they are from same brands, I just find downclocking more effective than overclocking, that's after spending years with few mining rigs

[miks66]

RX 580 Sapphire Nitro+  MOD BIOS
win10 1703
Driver: Adrenalin 2019.5.2
Miner: Phoenix 5.3b
cclock: 1250
mclock: 2250
cvddc: 850
mvddc: 880
Fan: 30%
temp 55
card power 84w


And ETH  33,7MH

[th00ber]

I have both RX 580 MSI Armor X OC and RX 580 Gigabyte AORUS.

My sweat spot is with TeamRedMiner 0.8.0
core 1150@825mV
mem 2150@800mV
62-64W reported in HiveOS (probably something like 110W at wall)

31.15 MH/s per GPU

I'm glad with it, because of the low power and low temp for a really nice Hashrate

[thanksmann]

RX 580 Sapphire Nitro+  MOD BIOS
win10 1703
Driver: Adrenalin 2019.5.2
Miner: Phoenix 5.3b
cclock: 1250
mclock: 2250
cvddc: 850
mvddc: 880
Fan: 30%
temp 55
card power 84w


And ETH  33,7MH

thank you kind stranger i have the same card that reaches 33,4 just with cclock = 1225, cant go higher unfortunately

now i am trying to reach 30MH/s with my rx 480

[sxemini]

My sapphire Nitro+ rx580 8gb running on 32,6 mhs with 1200/2200 890mv ~100w from wall.

how people can go so down. my some cards even dont down after 940mv. core voltage doing 880mv but it doesnt effect consumption but memory voltage effects alot. as soon as i give 920mv on memory then after couple hours crash. and also with 940mv i cant go up 2070mhz it will crash, how people cards stays stable on 2200mhz?
Ofcourse miner showing very less 66w-78w.

Because mem voltage and core voltage running the same voltage. If you set core 880 and mem 920, the card runs with 920 on core and memory. Different voltages have no effect, another bad point on many linux OS. You set a voltage but the cards don´t work on this voltages and this is not shown and no error or something like this.

[MCcryptonia]

It depends on the memory type that's inside your GPU, some rx580 can't do memory OC over 2000mhz without crashing, for example on my rx580 with micron memory I can do 2160mhz anything over this will bring instability and system reboot

[Williamm07]

Here is what works best for my rx580s with hynix memory and outputting 32MH per second, pretty stable no reboot after several days of mining

Memory clock: 2150 / 750mv
Core clock: 1070 / 800mv
Fan speed: 71%
Power limit: +0

[shavill]

My best is 1100 core and 2050 memclock.
Bios mode or -strap 1 in phoenix and You`ll get 29.9-30.5Mhash.
It`s power setting`s. Somme gpu`s can handle it at 750mv, somme at 850(samsung hynix memory)

I'm using nanominer (since claymore is wonked) and I can't find anything on -strap and -rxboost for it.

Which miner are you using?

Thanks in advance to anyone that can help me to get back to 31mh (sigh)

[shavill]

I have both RX 580 MSI Armor X OC and RX 580 Gigabyte AORUS.

My sweat spot is with TeamRedMiner 0.8.0
core 1150@825mV
mem 2150@800mV
62-64W reported in HiveOS (probably something like 110W at wall)

31.15 MH/s per GPU

I'm glad with it, because of the low power and low temp for a really nice Hashrate

No strap and/or rxboost settings?

Thanks

[greyday]

Hi all,
can anyone suggest me (best to do miner) what is the best overclock settings for RX 580 8GB mining.i am using nisehash.

You have to find a perfect spot for your own gpu because there is no perfect settings for a gpu, they are different even if they are from same brands, I just find downclocking more effective than overclocking, that's after spending years with few mining rigs

/\ THIS. I have used several different miners and OSes and there is variance there, too. You have to set each card individually and test it out for various periods to find what works best. Also keeping in mind longevity; if you want to make a quick turnaround/buck than go full force. I keep mine at about 90% what they COULD do, but I've had zero downtime on 6 580s for close to 4 years now...

[Bravehash]

I have both RX 580 MSI Armor X OC and RX 580 Gigabyte AORUS.

My sweat spot is with TeamRedMiner 0.8.0
core 1150@825mV
mem 2150@800mV
62-64W reported in HiveOS (probably something like 110W at wall)

31.15 MH/s per GPU

I'm glad with it, because of the low power and low temp for a really nice Hashrate

No strap and/or rxboost settings?

Thanks

Rxboost for RX 570 and 580 isn't available in all mining softwares out there, you can only see this option available in hiveOS, smOS and phoenix miner, you will need to add the rxboost in phoenix miner manually, do some google search on that it not hard

[IGdonJohn]

Hello!

Is there any risk to push memory clock higher if stable? Is this actualy wearing down the GPU?

I've reached up to CORE1140 / VDD900 / MEM2280 with stable 28.6 mh/s, without modifying the bios. The card ran at 50°C, 22%fan. 80W reported at hiveOs.
Sapphire Pulse RX 580 Hynix Memory.

Haven´t seen this configuration in other posts, many people claiming unstability after 2250 mhz.

Thanks!

[Vladimer95]

Just tested Core clock 1150 and Memory 2250 - got 31.7 MH/s on Rx 580 card.

[ibenk67]

Just tested Core clock 1150 and Memory 2250 - got 31.7 MH/s on Rx 580 card.

RX 580 8Gb
win10
Miner: Phoenix 5.8c
cclock: 1150
cvddc: 960
mclock: 2250
mvddc: 890
Fan: 42%
temp : 53
card power : 96w
hash : 31.349 MH/s