Now you can know your 3080/3090 Memory temps !

[Andartis]

We might need some qualified comment from a tech person though.
Maybe we should consider downclocking the mem!?

[trillobeat]

So here are some examples:

Re-padded Gigabyte OCs 3080 with Thermal Grizzly 8 Pads:
98°C, 98°C, 94°C, 96°C

Stock ASUS TUF OCs 3080:
100°C, 104°C, 106°C, 104°C.....

I dont like that. Should I consider doing a pad replacement on the ASUS, too? Worry about warranty.

Same here, Asus tuf 3080 OC 102C-106C at 90% fans and two 120mm scythe fans pushing air along the cards. Waterblocks are on the way, otherwise these memory banks will be a toast . I live in ever hot country so no nice low temps unless water-cooled.

[Hackintoshihope]

So here are some examples:

Re-padded Gigabyte OCs 3080 with Thermal Grizzly 8 Pads:
98°C, 98°C, 94°C, 96°C

Stock ASUS TUF OCs 3080:
100°C, 104°C, 106°C, 104°C.....

I dont like that. Should I consider doing a pad replacement on the ASUS, too? Worry about warranty.

I used gelid extreme and saw drops from 110 the 80’s from stock...

[Andartis]

So here are some examples:

Re-padded Gigabyte OCs 3080 with Thermal Grizzly 8 Pads:
98°C, 98°C, 94°C, 96°C

Stock ASUS TUF OCs 3080:
100°C, 104°C, 106°C, 104°C.....

I dont like that. Should I consider doing a pad replacement on the ASUS, too? Worry about warranty.

I used gelid extreme and saw drops from 110 the 80’s from stock...

On the ASUS TUF?
How thick were the pads you used?

[fenomenyaa]

So here are some examples:

Re-padded Gigabyte OCs 3080 with Thermal Grizzly 8 Pads:
98°C, 98°C, 94°C, 96°C

Stock ASUS TUF OCs 3080:
100°C, 104°C, 106°C, 104°C.....

I dont like that. Should I consider doing a pad replacement on the ASUS, too? Worry about warranty.

I used gelid extreme and saw drops from 110 the 80’s from stock...

applied to all or,just memory heatsink ?

[Andartis]

So here are some examples:

Re-padded Gigabyte OCs 3080 with Thermal Grizzly 8 Pads:
98°C, 98°C, 94°C, 96°C

Stock ASUS TUF OCs 3080:
100°C, 104°C, 106°C, 104°C.....

I dont like that. Should I consider doing a pad replacement on the ASUS, too? Worry about warranty.

I used gelid extreme and saw drops from 110 the 80’s from stock...

Just saw a disassemble on YT. The TUF seems to have already a lot of pads and a dedicated little heatsink on the memory. I dont know if you can achieve very much by repadding.
Maybe the way to go is to put some copper fin elements onto the backplate?