small mining S19PRO in house farm

[baro0k]

greetings

I have being suffering to find those devices and got my btc stolen twice since 2020 and finally I have got the S19PRO's home. keep in mind I live in Middle-East so those might face a problem in summer.

lets jump to the beginning, I'll Transfer to my house by April so I need a hand to prepare a good roof room for mining with those S19's without the same issues in my friend house.

friend house room is 4x4 meter square and it used to have 4 Z15 and 3 gpu mining rigs and everything was running so perfect, he called me to start mining with my S19's in the same room and we faced over heat only on the S19's and temperature issues so we replaced the Ac unit with 3 ton since he already knows that I won't stay long specially with his high charged cost for mining in his house the cut was 30% of what I got.

anyways here is some photos:

https://ibb.co/wcTZJZP
https://ibb.co/5xk0wxk
https://ibb.co/nC7Wkpg

anyway after long time of heat and the S19's can't handle it for an hour running in pool he decided to install 4 fans in a way that makes me scared to leave the rigs there for a while cause I know his house will be catches with fire sooner or later the devices have been moved.

know am butting plans on building my roof room as I mentioned before since I still have 2 more months until I move to my house so I need a recommendations hopes someone here facing 50 - 60 degrees in summer what's your planning and how you guys keeping those machines cool enough?

[mikeywith]

Did you encrypt S19 pro photos or what? there is something about this URL that does not seem right. Use one of these websites to upload images:

- https://imgbb.com/
- https://imgur.com/

[baro0k]

Uploaded some photos from what I was trying to explain but the mining log cannot be posted since its more than the expected letters to post I'll try to remove most of it and find the issue then share it with you guys.

[Steamtyme]

You can upload the logs by using the code button.

Code:

It's the # symbol above when typing a reply. Just copy and paste your log between the code. GL

[baro0k]

still can't add it all at least those the last few arrows hopes its help.

Code:

2021-01-20 17:44:51 ==========================capability start==========================
2021-01-20 17:44:51
2021-01-20 17:44:51
2021-01-20 17:44:51
2021-01-20 17:44:51
2021-01-20 17:44:51
2021-01-20 17:44:51
2021-01-20 17:44:51
2021-01-20 17:44:51 end============================
2021-01-20 17:44:51 chain num = 3
2021-01-20 17:44:52 [chain 0]
2021-01-20 17:44:52 0x0000 11 4A A6 B4 FC 5D 3B 06 CB 76 B3
2021-01-20 17:44:52 0x0010 8F 7D DB 5F A7 B9 4A BA C0 73
2021-01-20 17:44:52 0x0020 BA AD DE 1F E6 4A 29 62 5E 74
2021-01-20 17:44:52 0x0030 B9 6E 4A 70 D6 A6 2F FE 42 01
2021-01-20 17:44:52 0x0040 01 EF 91 C7 1A 04 74 D9 FF FF
2021-01-20 17:44:52 0x0050 FF FF FF FF FF FF FF FF FF
2021-01-20 17:44:52 0x0060 FF FF FF FF FF FF FF FF FF
2021-01-20 17:44:52 0x0070 FF FF FF FF FF FF FF FF
board num = 3
board id = 0, chain num = 1
chain id = 0
board id = 1, chain num = 1
chain id = 1
board id = 2, chain num = 1
chain id = 2 ==========================capability
BC A2 07 A9 DD 0E 54 4C 06 CF 33 41 E6 44 CE 57 5A 89 39 B6 C5 DF EF
CA 8C FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF
 FF
2021-01-20 17:44:52 FF
2021-01-20 17:44:52 FF
2021-01-20 17:44:52 FF
2021-01-20 17:44:52 FF
2021-01-20 17:44:52 FF
2021-01-20 17:44:52 FF
2021-01-20 17:44:52 FF
2021-01-20 17:44:52 5A
2021-01-20 17:44:52 2021-01-20 17:44:54 2021-01-20 17:44:54 08 A9
2021-01-20 17:44:54 37 1E
2021-01-20 17:44:54 09 7F A9 2021-01-20 17:44:54 CD FD
2021-01-20 17:44:54 FF FF
2021-01-20 17:44:54 FF
2021-01-20 17:44:54 FF
2021-01-20 17:44:54 FF
2021-01-20 17:44:54 FF
2021-01-20 17:44:54 FF
2021-01-20 17:44:54 FF
0x0080 FF FF FF FF FF FF FF FF 0x0090 FF FF FF FF FF FF FF FF 0x00A0 FF FF FF FF FF FF FF FF 0x00B0 FF FF FF FF FF FF FF FF 0x00C0 FF FF FF FF FF FF FF FF 0x00D0 FF FF FF FF FF FF FF FF 0x00E0 FF FF FF FF FF FF FF FF 0x00F0 FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF
[chain 1]
0x0000 11 4A 2C D1 DB C7 7C 2B
0x0010 7C 85 BF 6D ED 5E 10 75 0x0020 F4 2D 64 02 CD A9 AD E0 0x0030 F1 1A E3 35 20 A0 83 A2 0x0040 74 04 DC 92 34 03 AE 7B
4A C7 C0 C2 97 66 98 25 29 F1 EB FD
4E 4D D2 FB C8 0E 93 BC E7 D7 D7 B9 9F FF FF FF FF
0x0050 FF FF FF FF FF FF FF FF 0x0060 FF FF FF FF FF FF FF FF 0x0070 FF FF FF FF FF FF FF FF 0x0080 FF FF FF FF FF FF FF FF 0x0090 FF FF FF FF FF FF FF FF 0x00A0 FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

 2021-01-20 17:44:54 FF
2021-01-20 17:44:54 FF
2021-01-20 17:44:54 FF
2021-01-20 17:44:54 FF
2021-01-20 17:44:54 5A
2021-01-20 17:44:54 2021-01-20 17:44:56 2021-01-20 17:44:56 BF 99
2021-01-20 17:44:56 85 E4
2021-01-20 17:44:56 77 C7
2021-01-20 17:44:56 52 60
2021-01-20 17:44:56 FF FF
2021-01-20 17:44:56 FF
2021-01-20 17:44:56 FF
2021-01-20 17:44:56 FF
2021-01-20 17:44:56 FF
2021-01-20 17:44:56 FF
2021-01-20 17:44:56 FF
2021-01-20 17:44:56 FF
2021-01-20 17:44:56 FF
2021-01-20 17:44:56 FF
2021-01-20 17:44:56
0x00B0FFFFFFFFFFFFFFFF 0x00C0FFFFFFFFFFFFFFFF 0x00D0FFFFFFFFFFFFFFFF 0x00E0FFFFFFFFFFFFFFFF 0x00F0FFFFFFFFFFFFFFFF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[chain 2]
0x0000 11 4A 43 7C 58 3C 04 5A
0x0010 4D DF 78 39 E0 9D 60 44 0x0020 4A EF 84 8F EB 42 3A 8E 0x0030 77 08 2A 8F C1 2F 37 10 0x0040 27 EC 42 54 8F 48 FD 35
84 7E EC BE 94 F0 68 AE 9D 16 25 50
5F 27 0F 62 86 29 6F 16 EF 30 D4 3A
0x0050FFFFFFFFFFFFFFFF 0x0060FFFFFFFFFFFFFFFF 0x0070FFFFFFFFFFFFFFFF 0x0080FFFFFFFFFFFFFFFF 0x0090FFFFFFFFFFFFFFFF 0x00A0FFFFFFFFFFFFFFFF 0x00B0FFFFFFFFFFFFFFFF 0x00C0FFFFFFFFFFFFFFFF 0x00D0FFFFFFFFFFFFFFFF 0x00E0FFFFFFFFFFFFFFFF
8B 4D FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF

 FF
2021-01-20 17:44:56
5A
2021-01-20 17:44:56
2021-01-20 17:44:56
2021-01-20 17:44:56
2021-01-20 17:44:56
2021-01-20 17:44:56
2021-01-20 17:44:56
2021-01-20 17:44:56
2021-01-20 17:44:56
2021-01-20 17:44:56
2021-01-20 17:44:56
2021-01-20 17:45:00
2021-01-20 17:45:01 chain[0] PIC jump to app
FF FF FF FF FF FF FF
0x00F0 FF FF FF FF FF FF FF FF
fan_eft : 0 fan_pwm : 100 create thread
fixed working voltage = 1260 Chain [0] PCB Version: 0x0100 Chain [0] BOM Version: 0x0100 Chain [1] PCB Version: 0x0100 Chain [1] BOM Version: 0x0100 Chain [2] PCB Version: 0x0100 Chain [2] BOM Version: 0x0100 Fan check passed.
2021-01-20 17:45:02
2021-01-20 17:45:04
2021-01-20 17:45:05
2021-01-20 17:45:06
2021-01-20 17:45:08
2021-01-20 17:45:08
2021-01-20 17:45:08
2021-01-20 17:45:08
2021-01-20 17:45:12 power type version: 0x0071
2021-01-20 17:45:12 Enter sleep to make sure power release finish. 2021-01-20 17:47:37 Slept 144 seconds, diff = 5.
2021-01-20 17:47:37 set_voltage_by_steps to 1500.
2021-01-20 17:47:42 start up min temp by 75a = 41
2021-01-20 17:47:43 set UART baud to 115200
2021-01-20 17:47:49 chain avg vol rise to 15.19
2021-01-20 17:47:51 Chain[0]: find 114 asic, times 0
2021-01-20 17:47:59 Chain[1]: find 114 asic, times 0
2021-01-20 17:48:06 Chain[2]: find 114 asic, times 0
2021-01-20 17:48:06 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1 2021-01-20 17:48:11 min freq in eeprom = 525
2021-01-20 17:48:11 fixed frequency is 525 2021-01-20 17:48:11 Bring up temperature is 41 2021-01-20 17:48:11 set UART baud to 12000000 2021-01-20 17:48:11 set_voltage_by_steps to 1260. 2021-01-20 17:48:19 STATUS_INITED: soc init done! 2021-01-20 17:48:19 create thread
Check chain[0] PIC fw version=0x89 chain[1] PIC jump to app
Check chain[1] PIC fw version=0x89 chain[2] PIC jump to app
Check chain[2] PIC fw version=0x89 create thread
max sensor num = 4 temperature_monitor_thread start...

 2021-01-20 17:48:19 create thread
2021-01-20 17:48:21 start to init...
2021-01-20 17:48:29 Init done!
2021-01-20 17:48:29 STATUS_OKAY
2021-01-20 17:48:29 start the cached job
2021-01-20 17:48:29 Version num 8
2021-01-20 17:48:29 Mask num 0xe000
2021-01-20 17:48:29 freq = 525, percent = 90, hcn = 12480, timeout = 449 2021-01-20 17:48:29 set_start_time_point total_tv_start_sys=236 total_tv_end_sys=237
2021-01-20 18:16:44 set_voltage_by_steps to 1240.
2021-01-20 18:17:52 set_voltage_by_steps to 1260.
2021-01-20 18:58:07 set_voltage_by_steps to 1240.
2021-01-20 18:58:14 set_voltage_by_steps to 1260.
2021-01-20 19:48:12 set_voltage_by_steps to 1240.
2021-01-20 19:48:17 set_voltage_by_steps to 1260.
2021-01-20 19:49:22 set_voltage_by_steps to 1240.
2021-01-20 19:49:30 set_voltage_by_steps to 1260.
2021-01-20 19:49:39 set_voltage_by_steps to 1240.
2021-01-20 19:49:48 set_voltage_by_steps to 1260.
2021-01-20 19:52:55 set_voltage_by_steps to 1240.
2021-01-20 19:53:09 set_voltage_by_steps to 1260.
2021-01-20 20:08:21 set_voltage_by_steps to 1240.
2021-01-20 20:09:11 set_voltage_by_steps to 1260.
2021-01-20 20:19:00 set_voltage_by_steps to 1240.
2021-01-20 20:19:07 set_voltage_by_steps to 1260.
2021-01-20 20:19:12 set_voltage_by_steps to 1240.
2021-01-20 20:19:34 set_voltage_by_steps to 1260.
2021-01-20 20:20:17 set_voltage_by_steps to 1240.
2021-01-20 20:20:33 set_voltage_by_steps to 1260.
2021-01-20 20:20:39 set_voltage_by_steps to 1240.
2021-01-20 20:20:42 set_voltage_by_steps to 1260.
2021-01-20 20:21:29 set_voltage_by_steps to 1240.
2021-01-20 20:21:33 set_voltage_by_steps to 1260.
2021-01-20 20:21:37 set_voltage_by_steps to 1240.
2021-01-20 20:21:39 power reply the bad crc, crc = 0x0287, crc_read = 0x00d6
2021-01-20 20:21:39 read_back_data[0] = 0x55 2021-01-20 20:21:39 read_back_data[1] = 0xaa 2021-01-20 20:21:39 read_back_data[2] = 0x06 2021-01-20 20:21:39 read_back_data[3] = 0xff

 2021-01-20 20:21:39 read_back_data[4] = 0xff
2021-01-20 20:21:39 read_back_data[5] = 0x83
2021-01-20 20:21:39 read_back_data[6] = 0xd6
2021-01-20 20:21:39 read_back_data[7] = 0x00
2021-01-20 20:21:39 Send power cmd(0x83) failed, retry 0
2021-01-20 20:21:43 set_voltage_by_steps to 1260.
2021-01-20 20:21:52 set_voltage_by_steps to 1240.
2021-01-20 20:22:07 set_voltage_by_steps to 1260.
2021-01-20 20:22:47 set_voltage_by_steps to 1240.
2021-01-20 20:25:05 set_voltage_by_steps to 1260.
2021-01-20 20:25:14 set_voltage_by_steps to 1240.
2021-01-20 20:26:10 set_voltage_by_steps to 1260.
2021-01-20 20:26:24 set_voltage_by_steps to 1240.
2021-01-20 20:26:37 set_voltage_by_steps to 1260.
2021-01-20 20:26:42 set_voltage_by_steps to 1240.
2021-01-20 20:27:23 set_voltage_by_steps to 1260.
2021-01-20 20:27:32 set_voltage_by_steps to 1240.
2021-01-20 20:27:37 set_voltage_by_steps to 1260.
2021-01-20 20:27:40 set_voltage_by_steps to 1240.
2021-01-20 20:29:43 set_voltage_by_steps to 1260.
2021-01-20 20:29:46 set_voltage_by_steps to 1240.
2021-01-20 20:37:23 set_voltage_by_steps to 1260.
2021-01-20 20:37:28 set_voltage_by_steps to 1240.
2021-01-20 20:38:33 set_voltage_by_steps to 1260.
2021-01-20 20:39:40 set_voltage_by_steps to 1240.
2021-01-20 20:40:05 set_voltage_by_steps to 1260.
2021-01-20 20:40:49 set_voltage_by_steps to 1240.
2021-01-20 20:48:30 set_voltage_by_steps to 1260.
2021-01-20 20:48:50 set_voltage_by_steps to 1240.
2021-01-20 20:49:40 set_voltage_by_steps to 1260.
2021-01-20 20:49:49 set_voltage_by_steps to 1240.
2021-01-20 20:50:54 set_voltage_by_steps to 1260.
2021-01-20 20:51:55 set_voltage_by_steps to 1240.
2021-01-20 20:56:18 set_voltage_by_steps to 1260.
2021-01-20 20:56:22 set_voltage_by_steps to 1240.
2021-01-20 20:56:35 set_voltage_by_steps to 1260.
2021-01-20 20:56:44 set_voltage_by_steps to 1240.
2021-01-20 20:56:46 power reply the bad crc, crc = 0x025e, crc_read = 0x5f00
2021-01-20 20:56:46 read_back_data[0] = 0x55 2021-01-20 20:56:46 read_back_data[1] = 0xaa

 2021-01-20 20:56:46 read_back_data[2] = 0x06
2021-01-20 20:56:46 read_back_data[3] = 0x83
2021-01-20 20:56:46 read_back_data[4] = 0xff
2021-01-20 20:56:46 read_back_data[5] = 0xd6
2021-01-20 20:56:46 read_back_data[6] = 0x00
2021-01-20 20:56:46 read_back_data[7] = 0x5f
2021-01-20 20:56:46 Send power cmd(0x83) failed, retry 0 2021-01-20 20:56:51 set_voltage_by_steps to 1260.
2021-01-20 20:57:36 set_voltage_by_steps to 1240.
2021-01-20 21:07:45 set_voltage_by_steps to 1260.
2021-01-20 21:08:36 set_voltage_by_steps to 1240.
2021-01-20 21:15:06 set_voltage_by_steps to 1260.
2021-01-20 21:16:13 set_voltage_by_steps to 1240.
2021-01-20 21:18:30 set_voltage_by_steps to 1260.
2021-01-20 21:19:33 set_voltage_by_steps to 1240.
2021-01-20 21:20:41 set_voltage_by_steps to 1260.
2021-01-20 21:21:48 set_voltage_by_steps to 1240.
2021-01-20 21:22:55 set_voltage_by_steps to 1260.
2021-01-20 21:23:00 set_voltage_by_steps to 1240.
2021-01-20 22:45:52 set_voltage_by_steps to 1260.
2021-01-20 22:45:55 set_voltage_by_steps to 1240.
2021-01-20 22:45:58 set_voltage_by_steps to 1260.
2021-01-20 22:46:04 set_voltage_by_steps to 1240.
2021-01-20 22:46:52 set_voltage_by_steps to 1260.
2021-01-20 22:46:59 set_voltage_by_steps to 1240.
2021-01-20 22:47:02 set_voltage_by_steps to 1260.
2021-01-20 22:47:09 set_voltage_by_steps to 1240.
2021-01-20 23:24:17 set_voltage_by_steps to 1260.
2021-01-20 23:24:22 set_voltage_by_steps to 1240.
2021-01-20 23:26:18 set_voltage_by_steps to 1260.
2021-01-20 23:26:25 set_voltage_by_steps to 1240.
2021-01-20 23:27:29 set_voltage_by_steps to 1260.
2021-01-20 23:27:34 set_voltage_by_steps to 1240.
2021-01-20 23:37:31 set_voltage_by_steps to 1260.
2021-01-20 23:37:38 set_voltage_by_steps to 1240.
2021-01-20 23:39:49 set_voltage_by_steps to 1260.
2021-01-20 23:39:52 set_voltage_by_steps to 1240.
2021-01-20 23:41:42 set_voltage_by_steps to 1260.
2021-01-20 23:41:44 power reply the bad crc, crc = 0x0287, crc_read = 0x00c6
2021-01-20 23:41:44 read_back_data[0] = 0x55

 2021-01-20 23:41:44 read_back_data[1] = 0xaa
2021-01-20 23:41:44 read_back_data[2] = 0x06
2021-01-20 23:41:44 read_back_data[3] = 0x83
2021-01-20 23:41:44 read_back_data[4] = 0xff
2021-01-20 23:41:44 read_back_data[5] = 0xff
2021-01-20 23:41:44 read_back_data[6] = 0xc6
2021-01-20 23:41:44 read_back_data[7] = 0x00
2021-01-20 23:41:44 Send power cmd(0x83) failed, retry 0 2021-01-20 23:41:58 set_voltage_by_steps to 1240.
2021-01-20 23:42:54 set_voltage_by_steps to 1260.
2021-01-20 23:43:06 set_voltage_by_steps to 1240.
2021-01-20 23:45:29 set_voltage_by_steps to 1260.
2021-01-20 23:45:31 power reply the bad crc, crc = 0x01f9, crc_read = 0x4f00
2021-01-20 23:45:31 read_back_data[0] = 0x55 2021-01-20 23:45:31 read_back_data[1] = 0xff 2021-01-20 23:45:31 read_back_data[2] = 0xaa 2021-01-20 23:45:31 read_back_data[3] = 0x06 2021-01-20 23:45:31 read_back_data[4] = 0x83 2021-01-20 23:45:31 read_back_data[5] = 0xc6 2021-01-20 23:45:31 read_back_data[6] = 0x00 2021-01-20 23:45:31 read_back_data[7] = 0x4f 2021-01-20 23:45:31 Send power cmd(0x83) failed, retry 0 2021-01-20 23:45:35 set_voltage_by_steps to 1240. 2021-01-20 23:47:25 set_voltage_by_steps to 1260. 2021-01-20 23:47:32 set_voltage_by_steps to 1240. 2021-01-21 00:00:35 set_voltage_by_steps to 1260. 2021-01-21 00:00:38 set_voltage_by_steps to 1240. 2021-01-21 00:00:41 set_voltage_by_steps to 1260. 2021-01-21 00:00:47 set_voltage_by_steps to 1240. 2021-01-21 00:01:00 set_voltage_by_steps to 1260. 2021-01-21 00:01:04 set_voltage_by_steps to 1240. 2021-01-21 00:01:58 set_voltage_by_steps to 1260. 2021-01-21 00:02:03 set_voltage_by_steps to 1240. 2021-01-21 00:02:16 set_voltage_by_steps to 1260. 2021-01-21 00:02:20 set_voltage_by_steps to 1240. 2021-01-21 00:06:20 set_voltage_by_steps to 1260. 2021-01-21 00:06:24 set_voltage_by_steps to 1240. 2021-01-21 00:06:27 set_voltage_by_steps to 1260. 2021-01-21 00:06:34 set_voltage_by_steps to 1240. 2021-01-21 00:09:44 set_voltage_by_steps to 1260.

 2021-01-21 00:09:48 set_voltage_by_steps to 1240. 2021-01-21 00:09:53 set_voltage_by_steps to 1260. 2021-01-21 00:09:57 set_voltage_by_steps to 1240. 2021-01-21 00:10:18 set_voltage_by_steps to 1260. 2021-01-21 00:11:00 set_voltage_by_steps to 1240. 2021-01-21 00:13:40 set_voltage_by_steps to 1260. 2021-01-21 00:14:20 set_voltage_by_steps to 1240. 2021-01-21 00:14:23 set_voltage_by_steps to 1260. 2021-01-21 00:14:31 set_voltage_by_steps to 1240. 2021-01-21 00:15:39 set_voltage_by_steps to 1260. 2021-01-21 00:15:48 set_voltage_by_steps to 1240. 2021-01-21 00:16:45 set_voltage_by_steps to 1260. 2021-01-21 00:16:48 set_voltage_by_steps to 1240. 2021-01-21 00:17:06 set_voltage_by_steps to 1260. 2021-01-21 00:17:52 set_voltage_by_steps to 1240. 2021-01-21 00:19:09 set_voltage_by_steps to 1260. 2021-01-21 00:19:14 set_voltage_by_steps to 1240. 2021-01-21 00:19:20 set_voltage_by_steps to 1260. 2021-01-21 00:20:11 set_voltage_by_steps to 1240. 2021-01-21 00:21:33 set_voltage_by_steps to 1260. 2021-01-21 00:22:26 set_voltage_by_steps to 1240. 2021-01-21 00:23:36 set_voltage_by_steps to 1260. 2021-01-21 00:23:43 set_voltage_by_steps to 1240. 2021-01-21 00:23:54 set_voltage_by_steps to 1260. 2021-01-21 00:23:57 set_voltage_by_steps to 1240. 2021-01-21 00:24:05 set_voltage_by_steps to 1260. 2021-01-21 00:24:49 set_voltage_by_steps to 1240. 2021-01-21 00:26:02 set_voltage_by_steps to 1260. 2021-01-21 00:26:05 set_voltage_by_steps to 1240. 2021-01-21 00:27:12 set_voltage_by_steps to 1260. 2021-01-21 00:28:36 set_voltage_by_steps to 1240. 2021-01-21 00:32:37 set_voltage_by_steps to 1260. 2021-01-21 00:32:41 set_voltage_by_steps to 1240. 2021-01-21 00:32:54 set_voltage_by_steps to 1260. 2021-01-21 00:32:59 set_voltage_by_steps to 1240. 2021-01-21 00:33:10 set_voltage_by_steps to 1260. 2021-01-21 00:33:53 set_voltage_by_steps to 1240. 2021-01-21 00:34:05 set_voltage_by_steps to 1260. 2021-01-21 00:34:09 set_voltage_by_steps to 1240. 2021-01-21 00:35:04 set_voltage_by_steps to 1260. 2021-01-21 00:35:27 set_voltage_by_steps to 1240.

 2021-01-21 00:36:42 set_voltage_by_steps to 1260. 2021-01-21 00:37:21 set_voltage_by_steps to 1240. 2021-01-21 00:37:32 set_voltage_by_steps to 1260. 2021-01-21 00:37:46 set_voltage_by_steps to 1240. 2021-01-21 00:37:49 set_voltage_by_steps to 1260. 2021-01-21 00:37:55 set_voltage_by_steps to 1240. 2021-01-21 00:40:55 set_voltage_by_steps to 1260. 2021-01-21 00:41:13 set_voltage_by_steps to 1240. 2021-01-21 00:42:00 set_voltage_by_steps to 1260. 2021-01-21 00:43:04 set_voltage_by_steps to 1240. 2021-01-21 00:44:12 set_voltage_by_steps to 1260. 2021-01-21 00:44:19 set_voltage_by_steps to 1240. 2021-01-21 00:44:22 set_voltage_by_steps to 1260. 2021-01-21 00:44:44 set_voltage_by_steps to 1240. 2021-01-21 00:45:36 set_voltage_by_steps to 1260. 2021-01-21 00:45:52 set_voltage_by_steps to 1240. 2021-01-21 00:46:35 set_voltage_by_steps to 1260. 2021-01-21 00:47:01 set_voltage_by_steps to 1240. 2021-01-21 00:47:45 set_voltage_by_steps to 1260. 2021-01-21 00:48:00 set_voltage_by_steps to 1240. 2021-01-21 00:48:54 set_voltage_by_steps to 1260. 2021-01-21 00:48:57 set_voltage_by_steps to 1240. 2021-01-21 00:50:04 set_voltage_by_steps to 1260. 2021-01-21 00:50:14 set_voltage_by_steps to 1240. 2021-01-21 00:50:31 set_voltage_by_steps to 1260. 2021-01-21 00:50:36 set_voltage_by_steps to 1240. 2021-01-21 00:51:17 set_voltage_by_steps to 1260. 2021-01-21 00:52:25 set_voltage_by_steps to 1240. 2021-01-21 00:53:35 set_voltage_by_steps to 1260. 2021-01-21 00:53:40 set_voltage_by_steps to 1240. 2021-01-21 00:53:56 set_voltage_by_steps to 1260. 2021-01-21 00:54:02 set_voltage_by_steps to 1240. 2021-01-21 00:56:56 set_voltage_by_steps to 1260. 2021-01-21 00:57:18 set_voltage_by_steps to 1240. 2021-01-21 00:57:21 set_voltage_by_steps to 1260. 2021-01-21 00:57:27 set_voltage_by_steps to 1240. 2021-01-21 00:58:38 set_voltage_by_steps to 1260. 2021-01-21 00:59:17 set_voltage_by_steps to 1240. 2021-01-21 00:59:44 set_voltage_by_steps to 1260. 2021-01-21 01:00:27 set_voltage_by_steps to 1240. 2021-01-21 01:00:30 set_voltage_by_steps to 1260.

 2021-01-21 01:00:55 set_voltage_by_steps to 1240.
2021-01-21 01:01:38 set_voltage_by_steps to 1260.
2021-01-21 01:01:56 set_voltage_by_steps to 1240.
2021-01-21 01:02:03 set_voltage_by_steps to 1260.
2021-01-21 01:02:06 set_voltage_by_steps to 1240.
2021-01-21 01:02:52 set_voltage_by_steps to 1260.
2021-01-21 01:04:00 set_voltage_by_steps to 1240.
2021-01-21 01:05:35 set_voltage_by_steps to 1260.
2021-01-21 01:06:22 set_voltage_by_steps to 1240.
2021-01-21 01:06:36 set_voltage_by_steps to 1260.
2021-01-21 01:06:41 set_voltage_by_steps to 1240.
2021-01-21 01:06:46 set_voltage_by_steps to 1260.
2021-01-21 01:07:28 set_voltage_by_steps to 1240.
2021-01-21 01:08:35 set_voltage_by_steps to 1260.
2021-01-21 01:08:53 set_voltage_by_steps to 1240.
2021-01-21 01:09:45 set_voltage_by_steps to 1260.
2021-01-21 01:09:55 set_voltage_by_steps to 1240.
2021-01-21 01:10:02 set_voltage_by_steps to 1260.
2021-01-21 01:10:15 set_voltage_by_steps to 1240.
2021-01-21 01:10:59 set_voltage_by_steps to 1260.
2021-01-21 01:11:19 set_voltage_by_steps to 1240.
2021-01-21 01:11:22 set_voltage_by_steps to 1260.
2021-01-21 01:12:13 set_voltage_by_steps to 1240.
2021-01-21 01:12:17 set_voltage_by_steps to 1260.
2021-01-21 01:13:20 set_voltage_by_steps to 1240.
2021-01-21 01:14:39 set_voltage_by_steps to 1260.
2021-01-21 01:14:47 set_voltage_by_steps to 1240.
2021-01-21 01:15:40 set_voltage_by_steps to 1260.
2021-01-21 01:15:49 set_voltage_by_steps to 1240.
2021-01-21 01:15:53 set_voltage_by_steps to 1260.
2021-01-21 01:15:58 set_voltage_by_steps to 1240.
2021-01-21 01:16:51 set_voltage_by_steps to 1260.
2021-01-21 01:16:56 set_voltage_by_steps to 1240.
2021-01-21 01:17:00 set_voltage_by_steps to 1260.
2021-01-21 01:17:02 power reply the bad crc, crc = 0x01f9, crc_read = 0x4f00
2021-01-21 01:17:02 read_back_data[0] = 0x55 2021-01-21 01:17:02 read_back_data[1] = 0xff 2021-01-21 01:17:02 read_back_data[2] = 0xaa 2021-01-21 01:17:02 read_back_data[3] = 0x06 2021-01-21 01:17:02 read_back_data[4] = 0x83

 2021-01-21 01:17:02 read_back_data[5] = 0xc6 2021-01-21 01:17:02 read_back_data[6] = 0x00 2021-01-21 01:17:02 read_back_data[7] = 0x4f 2021-01-21 01:17:02 Send power cmd(0x83) failed, retry 0 2021-01-21 01:17:10 set_voltage_by_steps to 1240. 2021-01-21 01:17:26 set_voltage_by_steps to 1260. 2021-01-21 01:18:09 set_voltage_by_steps to 1240. 2021-01-21 01:19:16 set_voltage_by_steps to 1260. 2021-01-21 01:20:23 set_voltage_by_steps to 1240. 2021-01-21 01:21:31 set_voltage_by_steps to 1260. 2021-01-21 01:21:48 set_voltage_by_steps to 1240. 2021-01-21 01:21:57 set_voltage_by_steps to 1260. 2021-01-21 01:22:01 set_voltage_by_steps to 1240. 2021-01-21 01:22:05 set_voltage_by_steps to 1260. 2021-01-21 01:22:59 set_voltage_by_steps to 1240. 2021-01-21 01:23:54 set_voltage_by_steps to 1260. 2021-01-21 01:25:01 set_voltage_by_steps to 1240. 2021-01-21 01:25:21 set_voltage_by_steps to 1260. 2021-01-21 01:26:11 set_voltage_by_steps to 1240. 2021-01-21 01:26:14 set_voltage_by_steps to 1260. 2021-01-21 01:27:20 set_voltage_by_steps to 1240. 2021-01-21 01:28:28 set_voltage_by_steps to 1260. 2021-01-21 01:28:33 set_voltage_by_steps to 1240. 2021-01-21 01:28:59 set_voltage_by_steps to 1260. 2021-01-21 01:29:39 set_voltage_by_steps to 1240. 2021-01-21 01:29:53 set_voltage_by_steps to 1260. 2021-01-21 01:29:58 set_voltage_by_steps to 1240. 2021-01-21 01:30:56 set_voltage_by_steps to 1260. 2021-01-21 01:31:58 set_voltage_by_steps to 1240. 2021-01-21 01:33:18 set_voltage_by_steps to 1260. 2021-01-21 01:33:27 set_voltage_by_steps to 1240. 2021-01-21 01:33:33 set_voltage_by_steps to 1260. 2021-01-21 01:34:17 set_voltage_by_steps to 1240. 2021-01-21 01:34:36 set_voltage_by_steps to 1260. 2021-01-21 01:34:40 set_voltage_by_steps to 1240. 2021-01-21 01:35:29 set_voltage_by_steps to 1260. 2021-01-21 01:35:40 set_voltage_by_steps to 1240. 2021-01-21 01:35:44 set_voltage_by_steps to 1260. 2021-01-21 01:35:47 set_voltage_by_steps to 1240. 2021-01-21 01:35:53 set_voltage_by_steps to 1260. 2021-01-21 01:35:58 set_voltage_by_steps to 1240.

 2021-01-21 01:36:05 set_voltage_by_steps to 1260.
2021-01-21 01:36:10 set_voltage_by_steps to 1240.
2021-01-21 01:36:52 set_voltage_by_steps to 1260.
2021-01-21 01:36:58 set_voltage_by_steps to 1240.
2021-01-21 01:37:05 set_voltage_by_steps to 1260.
2021-01-21 01:38:18 set_voltage_by_steps to 1240.
2021-01-21 01:38:27 set_voltage_by_steps to 1260.
2021-01-21 01:39:12 set_voltage_by_steps to 1240.
2021-01-21 01:39:34 set_voltage_by_steps to 1260.
2021-01-21 01:40:22 set_voltage_by_steps to 1240.
2021-01-21 01:40:39 set_voltage_by_steps to 1260.
2021-01-21 01:40:42 set_voltage_by_steps to 1240.
2021-01-21 01:40:47 set_voltage_by_steps to 1260.
2021-01-21 01:41:56 set_voltage_by_steps to 1240.
2021-01-21 01:42:43 set_voltage_by_steps to 1260.
2021-01-21 01:42:52 set_voltage_by_steps to 1240.
2021-01-21 01:42:57 set_voltage_by_steps to 1260.
2021-01-21 01:43:06 set_voltage_by_steps to 1240.
2021-01-21 01:43:12 set_voltage_by_steps to 1260.
2021-01-21 01:43:59 set_voltage_by_steps to 1240.
2021-01-21 01:44:19 set_voltage_by_steps to 1260.
2021-01-21 01:44:22 set_voltage_by_steps to 1240.
2021-01-21 01:44:26 set_voltage_by_steps to 1260.
2021-01-21 01:45:23 set_voltage_by_steps to 1240.
2021-01-21 01:45:31 set_voltage_by_steps to 1260.
2021-01-21 01:45:42 set_voltage_by_steps to 1240.
2021-01-21 01:46:24 set_voltage_by_steps to 1260.
2021-01-21 01:46:51 set_voltage_by_steps to 1240.
2021-01-21 01:47:54 set_voltage_by_steps to 1260.
2021-01-21 01:48:41 set_voltage_by_steps to 1240.
2021-01-21 01:48:52 set_voltage_by_steps to 1260.
2021-01-21 01:48:57 set_voltage_by_steps to 1240.
2021-01-21 01:49:07 set_voltage_by_steps to 1260.
2021-01-21 01:49:55 set_voltage_by_steps to 1240.
2021-01-21 01:49:57 power reply the bad crc, crc = 0x0287, crc_read = 0x00d6
2021-01-21 01:49:57 read_back_data[0] = 0x55 2021-01-21 01:49:57 read_back_data[1] = 0xaa 2021-01-21 01:49:57 read_back_data[2] = 0x06 2021-01-21 01:49:57 read_back_data[3] = 0x83 2021-01-21 01:49:57 read_back_data[4] = 0xff

 2021-01-21 01:49:57 read_back_data[5] = 0xff
2021-01-21 01:49:57 read_back_data[6] = 0xd6
2021-01-21 01:49:57 read_back_data[7] = 0x00
2021-01-21 01:49:57 Send power cmd(0x83) failed, retry 0
2021-01-21 01:50:15 set_voltage_by_steps to 1260.
2021-01-21 01:50:26 set_voltage_by_steps to 1240.
2021-01-21 01:50:31 set_voltage_by_steps to 1260.
2021-01-21 01:51:29 set_voltage_by_steps to 1240.
2021-01-21 01:51:36 set_voltage_by_steps to 1260.
2021-01-21 01:53:25 set_voltage_by_steps to 1240.
2021-01-21 01:53:40 set_voltage_by_steps to 1260.
2021-01-21 01:54:35 set_voltage_by_steps to 1240.
2021-01-21 01:54:40 set_voltage_by_steps to 1260.
2021-01-21 01:54:44 set_voltage_by_steps to 1240.
2021-01-21 01:55:47 set_voltage_by_steps to 1260.
2021-01-21 01:55:56 set_voltage_by_steps to 1240.
2021-01-21 01:57:08 set_voltage_by_steps to 1260.
2021-01-21 01:58:03 set_voltage_by_steps to 1240.
2021-01-21 01:58:33 set_voltage_by_steps to 1260.
2021-01-21 01:58:37 set_voltage_by_steps to 1240.
2021-01-21 01:59:28 set_voltage_by_steps to 1260.
2021-01-21 01:59:33 set_voltage_by_steps to 1240.
2021-01-21 01:59:37 set_voltage_by_steps to 1260.
2021-01-21 02:01:32 set_voltage_by_steps to 1240.
2021-01-21 02:01:34 power reply the bad crc, crc = 0x025e, crc_read = 0x5f00
2021-01-21 02:01:34 read_back_data[0] = 0x55 2021-01-21 02:01:34 read_back_data[1] = 0xaa 2021-01-21 02:01:34 read_back_data[2] = 0x06 2021-01-21 02:01:34 read_back_data[3] = 0xff 2021-01-21 02:01:34 read_back_data[4] = 0x83 2021-01-21 02:01:34 read_back_data[5] = 0xd6 2021-01-21 02:01:34 read_back_data[6] = 0x00 2021-01-21 02:01:34 read_back_data[7] = 0x5f 2021-01-21 02:01:34 Send power cmd(0x83) failed, retry 0 2021-01-21 02:01:59 set_voltage_by_steps to 1260. 2021-01-21 02:02:05 set_voltage_by_steps to 1240. 2021-01-21 02:02:46 set_voltage_by_steps to 1260. 2021-01-21 02:03:54 set_voltage_by_steps to 1240. 2021-01-21 02:04:20 set_voltage_by_steps to 1260. 2021-01-21 02:05:22 set_voltage_by_steps to 1240.

 2021-01-21 02:05:32 set_voltage_by_steps to 1260.
2021-01-21 02:06:26 set_voltage_by_steps to 1240.
2021-01-21 02:06:28 power reply the bad crc, crc = 0x025e, crc_read = 0x5f00
2021-01-21 02:06:28 read_back_data[0] = 0x55
2021-01-21 02:06:28 read_back_data[1] = 0xaa
2021-01-21 02:06:28 read_back_data[2] = 0x06
2021-01-21 02:06:28 read_back_data[3] = 0xff
2021-01-21 02:06:28 read_back_data[4] = 0x83
2021-01-21 02:06:28 read_back_data[5] = 0xd6
2021-01-21 02:06:28 read_back_data[6] = 0x00
2021-01-21 02:06:28 read_back_data[7] = 0x5f
2021-01-21 02:06:28 Send power cmd(0x83) failed, retry 0
2021-01-21 02:06:32 set_voltage_by_steps to 1260.
2021-01-21 02:06:43 set_voltage_by_steps to 1240.
2021-01-21 02:06:48 set_voltage_by_steps to 1260.
2021-01-21 02:07:35 set_voltage_by_steps to 1240.
2021-01-21 02:07:43 set_voltage_by_steps to 1260.
2021-01-21 02:07:49 set_voltage_by_steps to 1240.
2021-01-21 02:07:59 set_voltage_by_steps to 1260.
2021-01-21 02:08:41 set_voltage_by_steps to 1240.
2021-01-21 02:09:02 set_voltage_by_steps to 1260.
2021-01-21 02:15:44 set_voltage_by_steps to 1240.
2021-01-21 02:16:24 set_voltage_by_steps to 1260.
2021-01-21 02:17:32 set_voltage_by_steps to 1240.
2021-01-21 02:18:39 set_voltage_by_steps to 1260.
2021-01-21 02:20:15 set_voltage_by_steps to 1240.
2021-01-21 02:20:54 set_voltage_by_steps to 1260.
2021-01-21 02:30:05 set_voltage_by_steps to 1240.
2021-01-21 02:30:45 set_voltage_by_steps to 1260.
2021-01-21 02:32:20 set_voltage_by_steps to 1240.
2021-01-21 02:32:24 set_voltage_by_steps to 1260.
2021-01-21 02:35:23 set_voltage_by_steps to 1240.
2021-01-21 02:35:38 set_voltage_by_steps to 1260.
2021-01-21 02:36:22 set_voltage_by_steps to 1240.
2021-01-21 02:37:29 set_voltage_by_steps to 1260.
2021-01-21 02:37:34 set_voltage_by_steps to 1240.
2021-01-21 02:37:44 set_voltage_by_steps to 1260.
2021-01-21 02:38:41 set_voltage_by_steps to 1240.
2021-01-21 02:38:53 set_voltage_by_steps to 1260.
2021-01-21 02:39:50 set_voltage_by_steps to 1240.

 2021-01-21 02:40:05 set_voltage_by_steps to 1260.
2021-01-21 02:40:08 set_voltage_by_steps to 1240.
2021-01-21 02:40:19 set_voltage_by_steps to 1260.
2021-01-21 02:41:17 set_voltage_by_steps to 1240.
2021-01-21 02:41:24 set_voltage_by_steps to 1260.
2021-01-21 02:41:28 set_voltage_by_steps to 1240.
2021-01-21 02:41:36 set_voltage_by_steps to 1260.
2021-01-21 02:41:39 set_voltage_by_steps to 1240.
2021-01-21 02:42:28 set_voltage_by_steps to 1260.
2021-01-21 02:42:31 set_voltage_by_steps to 1240.
2021-01-21 02:42:42 set_voltage_by_steps to 1260.
2021-01-21 02:44:38 set_voltage_by_steps to 1240.
2021-01-21 02:44:43 set_voltage_by_steps to 1260.
2021-01-21 02:46:01 set_voltage_by_steps to 1240.
2021-01-21 02:46:09 set_voltage_by_steps to 1260.
2021-01-21 02:46:20 set_voltage_by_steps to 1240.
2021-01-21 02:47:05 set_voltage_by_steps to 1260.
2021-01-21 02:47:13 set_voltage_by_steps to 1240.
2021-01-21 02:47:15 power reply the bad crc, crc = 0x0209, crc_read = 0x5f00
2021-01-21 02:47:15 read_back_data[0] = 0x55 2021-01-21 02:47:15 read_back_data[1] = 0xff
2021-01-21 02:47:15 read_back_data[2] = 0xaa 2021-01-21 02:47:15 read_back_data[3] = 0x06 2021-01-21 02:47:15 read_back_data[4] = 0x83 2021-01-21 02:47:15 read_back_data[5] = 0xd6 2021-01-21 02:47:15 read_back_data[6] = 0x00 2021-01-21 02:47:15 read_back_data[7] = 0x5f 2021-01-21 02:47:15 Send power cmd(0x83) failed, retry 0 2021-01-21 02:47:18 set_voltage_by_steps to 1260. 2021-01-21 02:47:26 set_voltage_by_steps to 1240. 2021-01-21 02:48:14 set_voltage_by_steps to 1260. 2021-01-21 02:49:21 set_voltage_by_steps to 1240. 2021-01-21 02:49:25 set_voltage_by_steps to 1260. 2021-01-21 02:49:42 set_voltage_by_steps to 1240. 2021-01-21 02:49:49 set_voltage_by_steps to 1260. 2021-01-21 02:49:54 set_voltage_by_steps to 1240. 2021-01-21 02:50:00 set_voltage_by_steps to 1260. 2021-01-21 02:50:51 set_voltage_by_steps to 1240. 2021-01-21 02:50:55 set_voltage_by_steps to 1260. 2021-01-21 03:05:00 set_voltage_by_steps to 1240.

 2021-01-21 03:05:12 set_voltage_by_steps to 1260.
2021-01-21 03:21:32 set_voltage_by_steps to 1240.
2021-01-21 03:21:37 set_voltage_by_steps to 1260.
2021-01-21 09:09:32 over max temp, pcb temp 81 (max 80), chip temp 96(max 95) pcb temp rise 0 chip temp rise 0, total_exit_failure 0 2021-01-21 09:09:32 ERROR_TEMP_TOO_HIGH: over max temp 2021-01-21 09:09:32 stop_mining: over max temp
2021-01-21 09:09:32 uninit_temp_info
2021-01-21 09:09:32 do not read temp anymore...
2021-01-21 09:09:32 cancel thread
2021-01-21 09:09:32 cancel thread
2021-01-21 09:09:32 cancel thread
2021-01-21 09:09:32 ****power off hashboard****
2021-01-21 09:09:34 temp monitor thread exit
2021-01-21 09:19:10 avg rate is lower than ideal rate, 75819.90 in 30 mins 2021-01-21 09:19:10 chain 0 hash rate 13348.00 low in 15 mins 2021-01-21 09:19:10 chain 1 hash rate 13447.00 low in 15 mins 2021-01-21 09:19:10 chain 2 hash rate 13514.00 low in 15 mins 2021-01-21 09:34:11 chain 0 hash rate 0.00 low in 15 mins
2021-01-21 09:34:11 chain 1 hash rate 0.00 low in 15 mins
2021-01-21 09:34:11 chain 2 hash rate 0.00 low in 15 mins
2021-01-21 09:49:11 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 10:19:12 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 10:49:12 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 11:19:13 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 11:49:13 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 12:19:14 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 12:49:14 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 13:19:15 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 13:49:16 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 14:19:16 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 14:49:17 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 15:19:17 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 15:49:18 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 16:19:18 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 16:49:19 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 17:19:20 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 17:49:20 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 18:19:21 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 18:49:21 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 19:19:22 avg rate is lower than ideal rate, 0.00 in 30 mins

 2021-01-21 19:49:22 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 20:19:23 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 20:49:24 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 21:19:24 avg rate is lower than ideal rate, 0.00 in 30 mins 2021-01-21 21:49:25 avg rate is lower than ideal rate, 0.00 in 30 mins 1970-01-01 00:00:09 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 This is fix-freq version
1970-01-01 00:00:10 Miner compile time: Fri Dec 11 11:23:44 CST 2020 type: Antminer S19 Pro
1970-01-01 00:00:10 commit version: 1821c90 2020-11-16 16:05:37, build by: jenkins 2020-12-11 11:35:43
1970-01-01 00:00:10 opt_multi_version
1970-01-01 00:00:10 opt_bitmain_ab
1970-01-01 00:00:10 mid_auto_gen
1970-01-01 00:00:10 opt_bitmain_work_mode = 0
1970-01-01 00:00:10 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:10 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:10 Note: front fan is power on!
1970-01-01 00:00:10 Note: rear fan is power on!
1970-01-01 00:00:10 start the http log.
1970-01-01 00:00:10 httpListenThread start ret=0
1970-01-01 00:00:10 start listen on 6060 ...
1970-01-01 00:00:10 load machine NBP1901 conf
1970-01-01 00:00:10 machine : NBP1901
1970-01-01 00:00:10 chain_num 4, chain_domain_num 38, chain_asic_num 114, domain_asic_num 3
2021-01-22 13:00:07 miner ID : 8114944857104814
2021-01-22 13:00:07 FPGA Version = 0xB031
2021-01-22 13:00:07 HASH_ON_PLUG V9 = 0x7
2021-01-22 13:00:07 ==========================capability start==========================
2021-01-22 13:00:07 board num = 3
2021-01-22 13:00:07 board id = 0, chain num = 1
2021-01-22 13:00:07 chain id = 0
2021-01-22 13:00:07 board id = 1, chain num = 1
2021-01-22 13:00:07 chain id = 1
2021-01-22 13:00:07 board id = 2, chain num = 1
2021-01-22 13:00:07 chain id = 2
2021-01-22 13:00:07 ==========================capability end============================
= 1 = 1 = 0

 2021-01-22 13:00:07 chain num = 3
2021-01-22 13:00:09 2021-01-22 13:00:09 CB 76 B3 2021-01-22 13:00:09 C0 73
2021-01-22 13:00:09 5E 74
2021-01-22 13:00:09 42 01
2021-01-22 13:00:09 FF FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 FF
2021-01-22 13:00:09 5A
[chain 0]
0x0000 11 4A A6 B4 FC 5D 3B 06
0x0010 8F 7D DB 5F A7 B9 4A BA 0x0020 BA AD DE 1F E6 4A 29 62 0x0030 B9 6E 4A 70 D6 A6 2F FE 0x0040 01 EF 91 C7 1A 04 74 D9 0x0050FFFFFFFFFFFFFFFF 0x0060FFFFFFFFFFFFFFFF 0x0070FFFFFFFFFFFFFFFF 0x0080FFFFFFFFFFFFFFFF 0x0090FFFFFFFFFFFFFFFF 0x00A0FFFFFFFFFFFFFFFF 0x00B0FFFFFFFFFFFFFFFF 0x00C0 FF FF FF FF FF FF FF FF 0x00D0 FF FF FF FF FF FF FF FF 0x00E0 FF FF FF FF FF FF FF FF 0x00F0 FF FF FF FF FF FF FF FF
BC A2 07 A9 DD 0E 54 4C 06 CF 33 41 E6 44 CE 57 5A 89 39 B6 C5 DF EF
2021-01-22 13:00:09
2021-01-22 13:00:11 [chain 1]
2021-01-22 13:00:11 0x0000 11 4A 2C D1 DB C7 7C 2B 08 A9
2021-01-22 13:00:11 0x0010 7C 85 BF 6D ED 5E 10 75 37 1E
2021-01-22 13:00:11 0x0020 F4 2D 64 02 CD A9 AD E0
4A C7 C0 C2 97 66 98 25 29 F1 EB FD
4E 4D D2 FB C8 09
CA 8C FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FFFFFFFFFFFFFF FFFFFFFFFFFFFF FFFFFFFFFFFFFF FFFFFFFFFFFFFF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

 7F A9
2021-01-22 13:00:11
CD FD
2021-01-22 13:00:11
FF FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
FF
2021-01-22 13:00:11
5A
2021-01-22 13:00:11
2021-01-22 13:00:13 [chain 2]
2021-01-22 13:00:13 0x0000 11 4A 43 7C 58 3C 04 5A
BF 99
2021-01-22 13:00:13 0x0010 4D DF 78 39 E0 9D 60 44
85 E4
2021-01-22 13:00:13 0x0020 4A EF 84 8F EB 42 3A 8E
77 C7
2021-01-22 13:00:13 0x0030 77 08 2A 8F C1 2F 37 10
52 60
2021-01-22 13:00:13 0x0040 27 EC 42 54 8F 48 FD 35
FF FF
2021-01-22 13:00:13 0x0050 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x0030 F1 1A E3 35 20 A0 83 A2 0E 93 BC E7 D7 D7 0x0040 74 04 DC 92 34 03 AE 7B B9 9F FF FF FF FF
0x0050FFFFFFFFFFFFFFFF 0x0060FFFFFFFFFFFFFFFF 0x0070FFFFFFFFFFFFFFFF 0x0080FFFFFFFFFFFFFFFF 0x0090FFFFFFFFFFFFFFFF 0x00A0FFFFFFFFFFFFFFFF 0x00B0FFFFFFFFFFFFFFFF 0x00C0 FF FF FF FF FF FF FF FF 0x00D0 FF FF FF FF FF FF FF FF 0x00E0 FF FF FF FF FF FF FF FF 0x00F0 FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FFFFFFFFFFFFFF FFFFFFFFFFFFFF FFFFFFFFFFFFFF FFFFFFFFFFFFFF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF
84 7E EC BE 94 F0 68 AE 9D 16 25 50
5F 27 0F 62 86 29 6F 16 EF 30 D4 3A
8B 4D FF FF FF FF

 2021-01-22 13:00:13 FF
2021-01-22 13:00:13 FF
2021-01-22 13:00:13 FF
2021-01-22 13:00:13 FF
2021-01-22 13:00:13 FF
2021-01-22 13:00:13 FF
2021-01-22 13:00:13 FF
2021-01-22 13:00:13 FF
2021-01-22 13:00:13 FF
2021-01-22 13:00:13 5A
2021-01-22 13:00:13
2021-01-22 13:00:13
2021-01-22 13:00:13
2021-01-22 13:00:13
2021-01-22 13:00:13
2021-01-22 13:00:13
2021-01-22 13:00:13
2021-01-22 13:00:13
2021-01-22 13:00:13
2021-01-22 13:00:13
2021-01-22 13:00:17
2021-01-22 13:00:17
2021-01-22 13:00:19
2021-01-22 13:00:20 chain[1] PIC jump to app 2021-01-22 13:00:22 Check chain[1] PIC fw version=0x89 2021-01-22 13:00:23 chain[2] PIC jump to app 2021-01-22 13:00:24 Check chain[2] PIC fw version=0x89 2021-01-22 13:00:25 create thread
2021-01-22 13:00:25 max sensor num = 4
2021-01-22 13:00:25 temperature_monitor_thread start... 2021-01-22 13:00:29 power type version: 0x0071
0x0060FFFFFFFFFFFF 0x0070FFFFFFFFFFFF 0x0080FFFFFFFFFFFF 0x0090FFFFFFFFFFFF 0x00A0FFFFFFFFFFFF 0x00B0FFFFFFFFFFFF 0x00C0FFFFFFFFFFFF 0x00D0FFFFFFFFFFFF 0x00E0FFFFFFFFFFFF 0x00F0FFFFFFFFFFFF
FF FF FF FF FF FF
FF FF FF FF FF FF FF FF FF FF FF FF
FF FF
FF FF FF FF FF FF FF FF FF FF FF FF FF FF FFFFFFFFFFFFFF
FFFFFFFFFFFFFF FFFFFFFFFFFFFF FFFFFFFFFFFFFF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
FF FF FF FF FF FF FF
fan_eft : 0 fan_pwm : 100 create thread
fixed working voltage = 1260 Chain [0] PCB Version: 0x0100 Chain [0] BOM Version: 0x0100 Chain [1] PCB Version: 0x0100 Chain [1] BOM Version: 0x0100 Chain [2] PCB Version: 0x0100 Chain [2] BOM Version: 0x0100 Fan check passed.
chain[0] PIC jump to app
Check chain[0] PIC fw version=0x89

2021-01-22 13:00:29 Enter sleep to make sure power release finish. 2021-01-22 13:01:00 Slept 30 seconds, diff = 1.
2021-01-22 13:01:00 set_voltage_by_steps to 1500.
2021-01-22 13:01:05 start up min temp by 75a = 24
2021-01-22 13:01:05 set UART baud to 115200
2021-01-22 13:01:10 chain avg vol rise to 15.17
2021-01-22 13:01:13 Chain[0]: find 114 asic, times 0
2021-01-22 13:01:21 Chain[1]: find 114 asic, times 0
2021-01-22 13:01:29 Chain[2]: find 114 asic, times 0
2021-01-22 13:01:29 pulse_mode = 1, ccdly_sel = 1, pwth_sel = 1 2021-01-22 13:01:33 min freq in eeprom = 525
2021-01-22 13:01:33 fixed frequency is 525 2021-01-22 13:01:33 Bring up temperature is 24 2021-01-22 13:01:34 set UART baud to 12000000 2021-01-22 13:01:34 set_voltage_by_steps to 1260. 2021-01-22 13:01:41 STATUS_INITED: soc init done! 2021-01-22 13:01:41 create thread
2021-01-22 13:01:41 create thread
2021-01-22 13:01:43 start to init...
2021-01-22 13:01:52 Init done!
2021-01-22 13:01:52 STATUS_OKAY
2021-01-22 13:01:52 start the cached job
2021-01-22 13:01:52 Version num 8
2021-01-22 13:01:52 Mask num 0xe000
2021-01-22 13:01:52 freq = 525, percent = 90, hcn = 12480, timeout = 449 2021-01-22 13:01:52 set_start_time_point total_tv_start_sys=122 total_tv_end_sys=123
2021-01-22 13:57:32 set_voltage_by_steps to 1240. 2021-01-22 13:57:38 set_voltage_by_steps to 1260. 2021-01-22 13:58:54 set_voltage_by_steps to 1240. 2021-01-22 13:59:34 set_voltage_by_steps to 1260. 2021-01-22 13:59:38 set_voltage_by_steps to 1240. 2021-01-22 13:59:42 set_voltage_by_steps to 1260.