HELP, transaction ID on blockchain explorers DONT APEAR :(

[ACCOUNTSTRADER]

I've made a mistake and sent a transaction with low fees, and it's stuck for more than 24 hours in the mempool with 0 confirmation.

So I've started my bitcoin-qt with option '-zapwallettxes=1', and it cleared my unconfirmed transaction from my wallet.

Then I've sent a new transaction to a different address but with a higher fee (dynamically calculated), the transaction appears on my bitcoin-qt client, but if I search for its transaction id on blockchain explorers, e.g. blockchain.info, it says that this transaction doesn't exists.

274c04dacfa70fe705466dc3f0ed998d1effc7c4658a0afcefab086328df42a8


Any help is appreciated.

Thanks in advance.

[ranochigo]

When you search up the other transaction ID on blockchair.com, is the field 'Replace-by-fee (RBF) enabled' YES or NO?

[ACCOUNTSTRADER]

When you search up the other transaction ID on blockchair.com, is the field 'Replace-by-fee (RBF) enabled' YES or NO?

Yes mate, both transaction  with RBF active

[LoyceV]

Then I've sent a new transaction to a different address but with a higher fee (dynamically calculated), the transaction appears on my bitcoin-qt client, but if I search for its transaction id on blockchain explorers, e.g. blockchain.info, it says that this transaction doesn't exists.

I saw a similar case yesterday. After several hours, the new transaction confirmed and the old transaction disappeared from block explorers. I expected this to take longer.

[bitmover]

I've made a mistake and sent a transaction with low fees, and it's stuck for more than 24 hours in the mempool with 0 confirmation.

So I've started my bitcoin-qt with option '-zapwallettxes=1', and it cleared my unconfirmed transaction from my wallet.

Then I've sent a new transaction to a different address but with a higher fee (dynamically calculated), the transaction appears on my bitcoin-qt client, but if I search for its transaction id on blockchain explorers, e.g. blockchain.info, it says that this transaction doesn't exists.

274c04dacfa70fe705466dc3f0ed998d1effc7c4658a0afcefab086328df42a8


Any help is appreciated.

Thanks in advance.

Can you see the first trnasaction in blockexplorer? How much sat/byte did you use (fee rate)?

Maybe you will have to have to wait a few days, but this first transaction will most likely be confirmed. I am making a lot of 1 sat byte transactions with no problems... 4-5 days at the most

[ACCOUNTSTRADER]

Since you created 2nd transaction manually (and assumption where both transaction uses same input) rather than use RBF feature, most likely many nodes have old transaction on their mempool, which cause your 2nd transaction rejected.

Have you tried to search address on your wallet on blockexplorer and see whether it has unconfirmed transaction which you cleared with -zapwallettxes=1?

First, thanks everybody for the suport 

No, i dont check  blockexplorer, i never do that on my node

[ACCOUNTSTRADER]

I've made a mistake and sent a transaction with low fees, and it's stuck for more than 24 hours in the mempool with 0 confirmation.

So I've started my bitcoin-qt with option '-zapwallettxes=1', and it cleared my unconfirmed transaction from my wallet.

Then I've sent a new transaction to a different address but with a higher fee (dynamically calculated), the transaction appears on my bitcoin-qt client, but if I search for its transaction id on blockchain explorers, e.g. blockchain.info, it says that this transaction doesn't exists.

274c04dacfa70fe705466dc3f0ed998d1effc7c4658a0afcefab086328df42a8


Any help is appreciated.

Thanks in advance.

Can you see the first trnasaction in blockexplorer? How much sat/byte did you use (fee rate)?

Maybe you will have to have to wait a few days, but this first transaction will most likely be confirmed. I am making a lot of 1 sat byte transactions with no problems... 4-5 days at the most

In the second transaction, i  pay  0.00011580 BTC fee (661 bytes)

Yes mate, i think i cant do nothing more than wait...

[NotATether]

In the second transaction, i  pay  0.00011580 BTC fee (661 bytes)

Yes mate, i think i cant do nothing more than wait...

That means in you paid about 17.5 satoshis/byte. It's not much better in terms of priority but given that is still hasn't appeared on block explorers, I'd agree that the second transaction has been rejected.

-zapwallettxes will only remove the transaction from your node and it can't remove them from other nodes which have downloaded this transaction from you.

Why don't you use RBF to bump the fee on the other transaction and send it to the other address?

[ACCOUNTSTRADER]

In the second transaction, i  pay  0.00011580 BTC fee (661 bytes)

Yes mate, i think i cant do nothing more than wait...

That means in you paid about 17.5 satoshis/byte. It's not much better in terms of priority but given that is still hasn't appeared on block explorers, I'd agree that the second transaction has been rejected.

-zapwallettxes will only remove the transaction from your node and it can't remove them from other nodes which have downloaded this transaction from you.

Why don't you use RBF to bump the fee on the other transaction and send it to the other address?

I dont use RBF because i send all the coins of the node, thats why i use zapwallettxes

[NotATether]

I dont use RBF because i send all the coins of the node, thats why i use zapwallettxes

Ah, so you don't have any bitcoins left to bump the fee with. Is there any chance you can send some more from another wallet to your node and use that to bump the fee of your first transaction?

[ACCOUNTSTRADER]

I dont use RBF because i send all the coins of the node, thats why i use zapwallettxes

Ah, so you don't have any bitcoins left to bump the fee with. Is there any chance you can send some more from another wallet to your node and use that to bump the fee of your first transaction?

But the first transaction dissapear when i use zapwallettxes. The 1º transaction dissapear and the amount of btc back to my wallet. And then i do an other transaction. And this second transaction dont apear for the moment in any explorer

[NotATether]

But the first transaction dissapear when i use zapwallettxes. The 1º transaction dissapear and the amount of btc back to my wallet. And then i do an other transaction. And this second transaction dont apear for the moment in any explorer

And the first transaction is still in block explorers even though it's not in your wallet?

I have a feeling that is the one which will be confirmed, so you should close Core and launch it again with -rescan to display the old transaction again. The coins all being there in your node may be a false indicator caused by a stale blockchain state.

[ACCOUNTSTRADER]

But the first transaction dissapear when i use zapwallettxes. The 1º transaction dissapear and the amount of btc back to my wallet. And then i do an other transaction. And this second transaction dont apear for the moment in any explorer

And the first transaction is still in block explorers even though it's not in your wallet?

I have a feeling that is the one which will be confirmed, so you should close Core and launch it again with -rescan to display the old transaction again. The coins all being there in your node may be a false indicator caused by a stale blockchain state.

Yes, the 1st transaction its in block explorers: fae6255a76c1289b00853a90025a0f89495fd0c4ebadf4a0b2a2c1201514ddb4

I think will wait and dont do nothing today xD I dont have idea about what will happend

[bitmover]

In the second transaction, i  pay  0.00011580 BTC fee (661 bytes)

Yes mate, i think i cant do nothing more than wait...

17 satoshi per byte is quite enough to get a confirmation within a few days.
Your transaction won't drop.

Don't worry. It will be confirmed in a few days.

Do you have the transaction ID for the first transaciton? do you mind sharing? if we can see it in the mempool, it will be confirmed .

[NotATether]

Do you have the transaction ID for the first transaciton? do you mind sharing? if we can see it in the mempool, it will be confirmed .

He actually posted it in the post above yours, it is https://blockchair.com/bitcoin/transaction/fae6255a76c1289b00853a90025a0f89495fd0c4ebadf4a0b2a2c1201514ddb4 .

And as I guessed, the priority is low, Blockchair reports it as 53623th of 54483 transactions in the mempool (at this moment, because the exact numbers are very volatile and are changing every minute or so). It is one of the lowest priority transactions in the mempool.

I heard that the mempool gets flushed around Saturday or Sunday so your transaction will most likely confirm then. If not then there are some transaction accelerator services on this forum you can use to get it confirmed, including one from Poolin that recently pushed someone's transaction containing funds that have been locked for almost a year. I recommend that if you are desperate, but there's also a free accelerator at FREE/PAY BITCOIN TRANSACTION ACCELERATOR which people have used successfully.

[ranochigo]

I heard that the mempool gets flushed around Saturday or Sunday so your transaction will most likely confirm then. If not then there are some transaction accelerator services on this forum you can use to get it confirmed, including one from Poolin that recently pushed someone's transaction containing funds that have been locked for almost a year. I recommend that if you are desperate, but there's also a free accelerator at FREE/PAY BITCOIN TRANSACTION ACCELERATOR which people have used successfully.

The mempool doesn't actually get flushed at fixed timing, nor flushed at all. Individual nodes has their own mempool and by extension, their own mempool policy. This means that the time for which the transaction gets dropped by the nodes varies with the parameters or the time for which the transaction gets relayed to that node. (I misread this part and assumed that you were talking about it in a literal sense.) Most accelerators merely rebroadcasts your transaction which does very little for your transaction, other than helping it propagate better. I doubt that anyone has actually had their transaction confirmed as a result of the "transaction accelerators" and without paying a pool to help them.
OP, I think that it might be a result of a fairly bad propagation to the block explorers and you won't be able to see them. If you want, you can go to Windows>Console and type in this

Code:

getrawtransaction 274c04dacfa70fe705466dc3f0ed998d1effc7c4658a0afcefab086328df42a8

Copy the output which is just a long string of characters and paste it here:
https://blockchair.com/broadcast
OR
coinb.in/#Broadcast

[bitmover]

He actually posted it in the post above yours, it is https://blockchair.com/bitcoin/transaction/fae6255a76c1289b00853a90025a0f89495fd0c4ebadf4a0b2a2c1201514ddb4 .

And as I guessed, the priority is low, Blockchair reports it as 53623th of 54483 transactions in the mempool (at this moment, because the exact numbers are very volatile and are changing every minute or so). It is one of the lowest priority transactions in the mempool.

I Just Checked it. It is one sat  byte, not 17. It will take some days, but will eventually be confirmed. It is the lowest priority. Will only get confirmed when the mempool Is cleared. Nothing to worry about.

I heard that the mempool gets flushed around Saturday or Sunday so your transaction will most likely confirm then. If not then there are some transaction accelerator services on this forum you can use to get it confirmed, including one from Poolin that recently pushed someone's transaction containing funds that have been locked for almost a year

But that transaction is certainly a very different situation, as the mempool is being cleared almost every week or so. No transaction stays 1 year waiting for confirmation,  only in ethereum blockchain (slowchain now lol

[ACCOUNTSTRADER]

I just restored the node, and now i see the fist transaction (fae6255a76c1289b00853a90025a0f89495fd0c4ebadf4a0b2a2c1201514ddb4).

Can i do something to speed up node synchronization? I dont want to wait 1-2 weeks to full sync for send btc for RBF this transaction... I want to spend my moneeeeyyyyyy 

[HCP]

I just restored the node, and now i see the fist transaction (fae6255a76c1289b00853a90025a0f89495fd0c4ebadf4a0b2a2c1201514ddb4).

Why did you "restore" the node?

All you had to do was do a rescanblockchain command on the console... or start with -rescan commandline argument... it would have found the "original" transaction and you'd still be fully synced. You wouldn't need to wait for anything (except the rescan command to complete) unless you are using a "pruned" node.

Can i do something to speed up node synchronization? I dont want to wait 1-2 weeks to full sync for send btc for RBF this transaction... I want to spend my moneeeeyyyyyy 

Sync speed is a function of:

- Storage type (SDD > HDD)
- CPU speed
- RAM (more == better, if you increase dbcache value)
- Internet Bandwidth

If any of these is "sub-optimal"... it'll slow things down