S19 an S19 Pro REG_TYPE = 1 ERROR.

[irrWN]

Hello.

I have problem with new S19 and S19 Pro asic. After start asic was get error REG_TYPE = 1 and stop mining. But if i plug only one hashboard, at any slot, any plce it work. If more than one hashboard i always get this error. What to do?

Code:

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine model: Xilinx Zynq
cma: Reserved 16 MiB at 0x0e000000
Memory policy: Data cache writealloc
On node 0 totalpages: 61440
free_area_init_node: node 0, pgdat c0b3c040, node_mem_map cde10000
  Normal zone: 480 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 61440 pages, LIFO batch:15
percpu: Embedded 12 pages/cpu @cddf0000 s19916 r8192 d21044 u49152
pcpu-alloc: s19916 r8192 d21044 u49152 alloc=12*4096
pcpu-alloc: [0] 0 [0] 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 60960
Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 209572K/245760K available (6317K kernel code, 243K rwdata, 1932K rodata, 1024K init, 232K bss, 19804K reserved, 16384K cma-reserved, 0K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
    vmalloc : 0xcf800000 - 0xff800000   ( 768 MB)
    lowmem  : 0xc0000000 - 0xcf000000   ( 240 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc090e410   (9242 kB)
      .init : 0xc0a00000 - 0xc0b00000   (1024 kB)
      .data : 0xc0b00000 - 0xc0b3cda0   ( 244 kB)
       .bss : 0xc0b3cda0 - 0xc0b77024   ( 233 kB)
Preemptible hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 32.
	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
NR_IRQS:16 nr_irqs:16 16
efuse mapped to cf800000
ps7-slcr mapped to cf802000
L2C: platform modifies aux control register: 0x72360000 -> 0x72760000
L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000
L2C-310 erratum 769419 enabled
L2C-310 enabling early BRESP for Cortex-A9
L2C-310 full line of zeros enabled for Cortex-A9
L2C-310 ID prefetch enabled, offset 1 lines
L2C-310 dynamic clock gating enabled, standby mode enabled
L2C-310 cache controller enabled, 8 ways, 512 kB
L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001
zynq_clock_init: clkc starts at cf802100
Zynq clock init
sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns
clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns
Switching to timer-based delay loop, resolution 3ns
clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns
ps7-ttc #0 at cf80a000, irq=18
Console: colour dummy device 80x30
Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Setting up static identity map for 0x100000 - 0x100058
CPU1: failed to boot: -1
Brought up 1 CPUs
SMP: Total of 1 processors activated (666.66 BogoMIPS).
CPU: All CPU(s) started in SVC mode.
devtmpfs: initialized
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
cpuidle: using governor menu
hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
hw-breakpoint: maximum watchpoint size is 4 bytes.
zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
EDAC MC: Ver: 3.0.0
Advanced Linux Sound Architecture Driver Initialized.
clocksource: Switched to clocksource arm_global_timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
rootfs image is not initramfs (no cpio magic); looks like an initrd
Freeing initrd memory: 6732K (cd467000 - cdafa000)
hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
futex hash table entries: 512 (order: 3, 32768 bytes)
workingset: timestamp_bits=28 max_order=16 bucket_order=0
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330
dma-pl330 f8003000.ps7-dma: 	DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 159, base_baud = 6249999) is a xuartps
console [ttyPS0] enabled
xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000
[drm] Initialized drm 1.1.0 20060810
brd: module loaded
loop: module loaded
CAN device driver interface
gpiod_set_value: invalid GPIO
libphy: MACB_mii_bus: probed
macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00)
Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1)
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
cdns-i2c e0005000.ps7_i2c: 100 kHz mmio e0005000 irq 154
Xilinx Zynq CpuIdle Driver started
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
nand: disable subpage write
nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
nand: Micron MT29F2G08ABAEAWP
nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
nand: NAND_ECC_HW
nand: NAND_ECC_HW_SYNDROME
mtd->writesize = 2048
ecc->strength = 1
ecc->size = 2048
mtd->writesize = 2048
chip->ecc_strength_ds = 4
chip->ecc_step_ds = 512
nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
8 ofpart partitions found on MTD device pl35x-nand
Creating 8 MTD partitions on "pl35x-nand":
0x000000000000-0x000002800000 : "BOOT.bin-dts-marker-kernel"
0x000002800000-0x000004800000 : "ramfs"
0x000004800000-0x000005000000 : "configs"
0x000005000000-0x000005200000 : "sig"
0x000005200000-0x000006000000 : "reserve1"
0x000006000000-0x000007000000 : "upgrade-ramfs"
0x000007000000-0x00000a800000 : "upgrade-file"
0x00000a800000-0x000010000000 : "reserve2"
nf_conntrack version 0.5.0 (3635 buckets, 14540 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
can: controller area network core (rev 20120528 abi 9)
NET: Registered protocol family 29
can: raw protocol (rev 20120528)
can: broadcast manager protocol (rev 20120528 t)
can: netlink gateway (rev 20130117) max_hops=1
zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05'
zynq_pm_late_init: Unable to map DDRC IO memory.
Registering SWP/SWPB emulation handler
hctosys: unable to open rtc device (rtc0)
ALSA device list:
  No soundcards found.
RAMDISK: gzip image found at block 0
EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs warning (device ram0): ext4_update_dynamic_rev:746: updating to rev 1 because of new feature flag, running e2fsck is recommended
EXT4-fs (ram0): mounted filesystem without journal. Opts: (null)
VFS: Mounted root (ext4 filesystem) on device 1:0.
devtmpfs: mounted
Freeing unused kernel memory: 1024K (c0a00000 - c0b00000)
EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr,errors=remount-ro
devpts: called with bogus options
ubi0: attaching mtd2
ubi0: scanning is finished
ubi0: attached mtd2 (name "configs", size 8 MiB)
ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0
ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 262741923
ubi0: available PEBs: 36, total reserved PEBs: 28, PEBs reserved for bad PEB handling: 4
ubi0: background thread "ubi_bgt0d" started, PID 729
UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 733
UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs"
UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs)
UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB)
UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A9E8BDA4-70DE-45D9-83BE-2DD9F129C0C6, small LPT model
ubi2: attaching mtd4
ubi2: scanning is finished
ubi2: attached mtd4 (name "reserve1", size 14 MiB)
ubi2: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
ubi2: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
ubi2: VID header offset: 2048 (aligned 2048), data offset: 4096
ubi2: good PEBs: 112, bad PEBs: 0, corrupted PEBs: 0
ubi2: user volume: 1, internal volumes: 1, max. volumes count: 128
ubi2: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 2642727309
ubi2: available PEBs: 0, total reserved PEBs: 112, PEBs reserved for bad PEB handling: 4
ubi2: background thread "ubi_bgt2d" started, PID 740
UBIFS (ubi2:0): background thread "ubifs_bgt2_0" started, PID 744
UBIFS (ubi2:0): UBIFS: mounted UBI device 2, volume 0, name "misc"
UBIFS (ubi2:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
UBIFS (ubi2:0): FS size: 11935744 bytes (11 MiB, 94 LEBs), journal size 1015809 bytes (0 MiB, 6 LEBs)
UBIFS (ubi2:0): reserved for root: 563754 bytes (550 KiB)
UBIFS (ubi2:0): media format: w4/r0 (latest is w4/r0), UUID 34DDD26A-2E95-41B3-8532-5CCDD42C37CF, small LPT model
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
random: avahi-daemon urandom read with 2 bits of entropy available
macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz
macb e000b000.ethernet eth0: link up (100/Full)
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
In axi fpga driver!
request_mem_region OK!
AXI fpga dev virtual address is 0xcfbc8000
*base_vir_addr = 0xb031
In fpga mem driver!
request_mem_region OK!
fpga mem virtual address is 0xd2000000


===========================================Miner log===========================================
1970-01-01 00:00:10 Miner compile time: Mon Oct 26 17:45:27 CST 2020 type: Antminer S19
1970-01-01 00:00:11 This is fix-freq version
1970-01-01 00:00:11 Miner compile time: Mon Oct 26 17:45:27 CST 2020 type: Antminer S19
1970-01-01 00:00:11 commit version: 62e4736 2020-09-21 11:17:56, build by: jenkins 2020-10-26 17:54:40
1970-01-01 00:00:11 opt_multi_version     = 1
1970-01-01 00:00:11 opt_bitmain_ab        = 1
1970-01-01 00:00:11 mid_auto_gen          = 0
1970-01-01 00:00:11 opt_bitmain_work_mode = 0
1970-01-01 00:00:11 mmap fpga_mem_addr_hal = 0xb5800000
1970-01-01 00:00:11 HASH_ON_PLUG V9 = 0x7
1970-01-01 00:00:11 Note: front fan is power on!
1970-01-01 00:00:11 Note: rear fan is power on!
1970-01-01 00:00:11 start the http log.
1970-01-01 00:00:11 httpListenThread start ret=0
1970-01-01 00:00:11 start listen on 6060 ...
1970-01-01 00:00:11 load machine NBS1902 conf
1970-01-01 00:00:11 machine : NBS1902 
1970-01-01 00:00:11 chain_num 4, chain_domain_num 38, chain_asic_num 76, domain_asic_num 2
2021-02-05 14:13:20 miner ID : 80020cce7510481c
2021-02-05 14:13:20 FPGA Version = 0xB031
2021-02-05 14:13:20 HASH_ON_PLUG V9 = 0x7
2021-02-05 14:13:20 ==========================capability start==========================
2021-02-05 14:13:20 board num = 3
2021-02-05 14:13:20 board id = 0, chain num = 1
2021-02-05 14:13:20 	chain id = 0
2021-02-05 14:13:20 board id = 1, chain num = 1
2021-02-05 14:13:20 	chain id = 1
2021-02-05 14:13:20 board id = 2, chain num = 1
2021-02-05 14:13:20 	chain id = 2
2021-02-05 14:13:20 ==========================capability end============================
2021-02-05 14:13:20 chain num = 3
2021-02-05 14:13:22 [chain 0]
2021-02-05 14:13:22 0x0000 11 42 7E 7C 4B 48 16 F2   DA CC 96 A6 7B 13 9E 45 
2021-02-05 14:13:22 0x0010 A6 28 6D 8B D0 49 63 F9   37 F6 39 28 32 74 8F 80 
2021-02-05 14:13:22 0x0020 17 0A 5D 9A CE 5F AA 18   8E E7 96 6C BE F4 AA 10 
2021-02-05 14:13:22 0x0030 FA 6A A9 41 8D 23 09 03   2E 10 6B 57 C4 CC B6 60 
2021-02-05 14:13:22 0x0040 A4 28 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:22 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2021-02-05 14:13:22 
2021-02-05 14:13:23 [chain 1]
2021-02-05 14:13:23 0x0000 11 42 BD CE AC 60 E6 08   D0 06 87 36 E0 A2 D5 C3 
2021-02-05 14:13:23 0x0010 5F 54 4E DF E3 45 17 C1   76 22 78 E4 70 59 77 5C 
2021-02-05 14:13:23 0x0020 66 1F 4F C6 B0 BC 1A 7F   B1 5B AB 5F 05 2F 5E E7 
2021-02-05 14:13:23 0x0030 F9 31 D4 49 9A 2D 48 BF   CF 7D 9B B0 C0 CE 73 F3 
2021-02-05 14:13:23 0x0040 BC B8 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:23 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2021-02-05 14:13:23 
2021-02-05 14:13:25 [chain 2]
2021-02-05 14:13:25 0x0000 11 42 9C DC 64 48 28 8B   63 EC 89 BE D6 CC 08 0F 
2021-02-05 14:13:25 0x0010 45 F8 25 C9 C5 B4 C3 C4   06 CF 7E 62 41 CE 27 5D 
2021-02-05 14:13:25 0x0020 6C 78 02 C6 1E 88 04 6A   5B A8 AD 4B C3 F0 17 F8 
2021-02-05 14:13:25 0x0030 4B 03 5E 88 EF 34 C1 87   50 A0 0E 55 DA 98 CB E7 
2021-02-05 14:13:25 0x0040 C9 84 FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x0050 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x0060 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x0070 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x0080 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x0090 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x00A0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x00B0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x00C0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x00D0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x00E0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF FF 
2021-02-05 14:13:25 0x00F0 FF FF FF FF FF FF FF FF   FF FF FF FF FF FF FF 5A 
2021-02-05 14:13:25 
2021-02-05 14:13:25 fan_eft : 0  fan_pwm : 100
2021-02-05 14:13:25 create thread
2021-02-05 14:13:25 fixed working voltage = 1380
2021-02-05 14:13:25 Chain [0] PCB Version: 0x011e
2021-02-05 14:13:25 Chain [0] BOM Version: 0x0100
2021-02-05 14:13:25 Chain [1] PCB Version: 0x011e
2021-02-05 14:13:25 Chain [1] BOM Version: 0x0100
2021-02-05 14:13:25 Chain [2] PCB Version: 0x011e
2021-02-05 14:13:25 Chain [2] BOM Version: 0x0100
2021-02-05 14:13:29 Fan check passed.
2021-02-05 14:13:30 chain[0] PIC jump to app
2021-02-05 14:13:32 Check chain[0] PIC fw version=0x89
2021-02-05 14:13:33 chain[1] PIC jump to app
2021-02-05 14:13:34 Check chain[1] PIC fw version=0x89
2021-02-05 14:13:35 chain[2] PIC jump to app
2021-02-05 14:13:37 Check chain[2] PIC fw version=0x89
2021-02-05 14:13:37 create thread
2021-02-05 14:13:37 max sensor num = 4
2021-02-05 14:13:37 temperature_monitor_thread start...
2021-02-05 14:13:41 power type version: 0x0071
2021-02-05 14:13:41 Enter sleep to make sure power release finish.
2021-02-05 14:14:31 Slept 49 seconds, diff = 5.
2021-02-05 14:14:31 set_voltage_by_steps to 1500.
2021-02-05 14:14:34 start up min temp by 75a = 23
2021-02-05 14:14:34 set UART baud to 115200
2021-02-05 14:14:43 Chain[0]: find 76 asic, times 0
2021-02-05 14:14:50 Chain[1]: find 76 asic, times 0
2021-02-05 14:14:58 Chain[2]: find 76 asic, times 0
2021-02-05 14:14:58 pulse_mode = 1, ccdly_sel = 0, pwth_sel = 0
2021-02-05 14:15:01 min freq in eeprom = 675
2021-02-05 14:15:01 fixed frequency is 675
2021-02-05 14:15:01 Bring up temperature is 23
2021-02-05 14:15:01 set UART baud to 12000000
2021-02-05 14:15:02 set_voltage_by_steps to 1380.
2021-02-05 14:15:09 STATUS_INITED: soc init done!
2021-02-05 14:15:09 create thread
2021-02-05 14:15:09 create thread
2021-02-05 14:15:11 start to init...
2021-02-05 14:15:22 Init done!
2021-02-05 14:15:22 STATUS_OKAY
2021-02-05 14:15:22 start the cached job
2021-02-05 14:15:22 Version num 8
2021-02-05 14:15:22 Mask num 0xe000
2021-02-05 14:15:22 freq = 675, percent = 90, hcn = 14560, timeout = 524
2021-02-05 14:15:22 set_start_time_point total_tv_start_sys=140 total_tv_end_sys=141

[BitMaxz]

Have you recently update this to the latest firmware? They recently released a new version just yesterday.
So if you still not updated yet to the latest version try to update it to the latest firmware released.

I heard someone from bitmain forum that they solve this by updating it to the latest firmware and some of them flash with SD card image.

Their latest firmware can be found here https://service.bitmain.com/support/download?product=Antminer%20S19%20Pro

[mikeywith]

Sounds like a PSU related issue, what is the voltage you feeding the power supply of?

Keep in mind that while the latest firmware might fix it, it will be a lot harder to get rid of it, i heard that someone already found a way to uninstall the stock firmware and there is no confirmation on that yet, the latest firmware would in theory be even more difficult assuming they patched the first one.

[irrWN]

I've tried everything. I've updated the firmware, tried different power supplies, different control boards, etc. Nothing helps.

[mikeywith]

I've tried everything. I've updated the firmware, tried different power supplies, different control boards, etc. Nothing helps.

All of this is irrelevant if the voltage is outside of the 200-240v range, you mentioned that it works just fine with a single board plugged in, which also suggests that the PSU isn't capable of running all 3 hash boards, this is either caused by a bad PSU or bad voltage, since you tried different PSUs then it's most likely voltage issue.

[irrWN]

He did not work well at his workplace, I carried out diagnostics in my other two laboratories, where I replaced power supplies and boards.

[BitMaxz]

Have you tried to replace the cables? If you have an extra miner try to replace the cable from hashboard to the control board also check the power terminal and maybe those sockets are burnt/damaged.

This parts:



And physically check the hash board and maybe there are some loose heatsinks that's why it runs in a few minutes then stop.

I suggest you if it's still under warranty contact Bitmain directly about your issue it might be a hardware issue related to the hash board (It might be defective).

[mikeywith]

BitMaxz, seems like you did not disassemble any of the new bitmain shitty gears, the 6pin cable design is long gone, and probably will never return, they now use a busbar like style, you basically have two metal pieces of + - that are directly attached to the hashboards (pain in the butt to take out on the S17 pro version), sometimes if the screws are a bit lose it will cause a hashboard not to run and report 0 Asics especially the one to the most right where torque (if that is the correct term) is at it's lowest, but most certainly doesn't seem like the problem which OP is facing.