2021-02-11 01:07:46:temperature.c:754:get_temp_info: ERROR: chain 1 can get NONE temp info or temp value abnormal, power it off
is that the problem?
It is a problem, the control board doesn't seem to be receiving any signal from 1 or more of the 4 temp sensors on that chain, the default firmware needs 4 out of 4 sensors to work, custom firmware like Vnish will need at least 1, but I am not sure if they have developed something for the S17e version, you will have to check asic.to and AwesomeMiner.
Assuming you indeed have a bad temp sensor then that will fix it, but keep in mind that it's not so likely, the more likely is you have a problem with one of the chips/heatsink, I have explained this issue in great detail
here.