S19 issue. One hashboard not found, remaining 2 show abnormal status.

[lst_ward]

Hello

I am new to mining and have an S19. I power it up and access the web interface, One of the hashboards is missing and the other two show status abnormal. I have a snip of the logs and was hoping someone would take a look and possibly point me in the right direction to diagnose.  if the logs posted are insufficient, I will try to post more meaningful information. 

Thank you

Code:

2021-02-11 01:39:42 temperature_monitor_thread start...
2021-02-11 01:39:43 No hash board sn, chain = 0.
2021-02-11 01:39:43 No chip bin, chain = 0
2021-02-11 01:39:43 No ft ver, chain = 0
2021-02-11 01:39:43 No test standard, chain = 0.
2021-02-11 01:39:43 No hash board sn, chain = 1.
2021-02-11 01:39:43 No chip bin, chain = 1
2021-02-11 01:39:43 No ft ver, chain = 1
2021-02-11 01:39:43 No test standard, chain = 1.
2021-02-11 01:39:43 No hash board sn, chain = 2.
2021-02-11 01:39:43 No chip bin, chain = 2
2021-02-11 01:39:43 No ft ver, chain = 2
2021-02-11 01:39:43 No test standard, chain = 2.
2021-02-11 01:39:44 No hash board sn, chain = 0.
2021-02-11 01:39:44 No chip bin, chain = 0
2021-02-11 01:39:44 No ft ver, chain = 0
2021-02-11 01:39:44 No test standard, chain = 0.
2021-02-11 01:39:44 No hash board sn, chain = 1.
2021-02-11 01:39:44 No chip bin, chain = 1
2021-02-11 01:39:44 No ft ver, chain = 1
2021-02-11 01:39:44 No test standard, chain = 1.
2021-02-11 01:39:44 No hash board sn, chain = 2.
2021-02-11 01:39:44 No chip bin, chain = 2
2021-02-11 01:39:44 No ft ver, chain = 2
2021-02-11 01:39:44 No test standard, chain = 2.
2021-02-11 01:39:45 No hash board sn, chain = 0.
2021-02-11 01:39:45 No chip bin, chain = 0
2021-02-11 01:39:45 No ft ver, chain = 0
2021-02-11 01:39:45 No test standard, chain = 0.
2021-02-11 01:39:45 No hash board sn, chain = 1.
2021-02-11 01:39:45 No chip bin, chain = 1
2021-02-11 01:39:45 No ft ver, chain = 1
2021-02-11 01:39:45 No test standard, chain = 1.
2021-02-11 01:39:45 No hash board sn, chain = 2.
2021-02-11 01:39:45 No chip bin, chain 

[BitMaxz]

Can you share the whole kernel logs?

Since the newbie here on the forum has limited text to post the whole kernel logs you can use this https://pastebin.com/ Then paste the URL here.
So that we can see the first logs before this error occurs.

Do you have an extra miner S19?

Try to swap cable and PSU let see if it will work if not then you received a defective unit. If it still under warranty you can send it back to Bitmain to repair the issue.