rydog89 (OP)
Newbie
Offline
Activity: 14
Merit: 0
|
|
February 12, 2021, 02:53:27 AM Last edit: February 15, 2021, 11:16:31 PM by frodocooper |
|
Can someone help me understand what is going on with my Antminer S9? I copy and pasted the kernal log below. [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017 [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Xilinx Zynq [ 0.000000] cma: CMA: reserved 128 MiB at 16800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 126976 [ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000 [ 0.000000] Normal zone: 992 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768 [ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984 [ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem) [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB) [ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB) [ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB) [ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB) [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] ps7-slcr mapped to df802000 [ 0.000000] zynq_clock_init: clkc starts at df802100 [ 0.000000] Zynq clock init [ 0.000014] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns [ 0.000308] ps7-ttc #0 at df804000, irq=43 [ 0.000617] Console: colour dummy device 80x30 [ 0.000648] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328) [ 0.040208] pid_max: default: 32768 minimum: 301 [ 0.040425] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.040445] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.042580] CPU: Testing write buffer coherency: ok [ 0.042917] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.042977] Setting up static identity map for 0x4c4b00 - 0x4c4b58 [ 0.043202] L310 cache controller enabled [ 0.043222] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB [ 0.121033] CPU1: Booted secondary processor [ 0.210227] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.210358] Brought up 2 CPUs [ 0.210377] SMP: Total of 2 processors activated. [ 0.210386] CPU: All CPU(s) started in SVC mode. [ 0.211047] devtmpfs: initialized [ 0.213462] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 [ 0.214673] regulator-dummy: no parameters [ 0.222343] NET: Registered protocol family 16 [ 0.224627] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.226913] cpuidle: using governor ladder [ 0.226926] cpuidle: using governor menu [ 0.234350] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered [ 0.235872] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.235886] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.236001] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000 [ 0.257825] bio: create slab <bio-0> at 0 [ 0.259254] vgaarb: loaded [ 0.259965] SCSI subsystem initialized [ 0.260999] usbcore: registered new interface driver usbfs [ 0.261831] usbcore: registered new interface driver hub [ 0.262073] usbcore: registered new device driver usb [ 0.262602] media: Linux media interface: v0.10 [ 0.262759] Linux video capture interface: v2.00 [ 0.262999] pps_core: LinuxPPS API ver. 1 registered [ 0.263011] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.263133] PTP clock support registered [ 0.263494] EDAC MC: Ver: 3.0.0 [ 0.264532] Advanced Linux Sound Architecture Driver Initialized. [ 0.267358] DMA-API: preallocated 4096 debug entries [ 0.267372] DMA-API: debugging enabled by kernel config [ 0.267445] Switched to clocksource arm_global_timer [ 0.288011] NET: Registered protocol family 2 [ 0.288666] TCP established hash table entries: 4096 (order: 2, 16384 bytes) [ 0.288723] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) [ 0.288808] TCP: Hash tables configured (established 4096 bind 4096) [ 0.288858] TCP: reno registered [ 0.288876] UDP hash table entries: 256 (order: 1, 8192 bytes) [ 0.288908] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) [ 0.289138] NET: Registered protocol family 1 [ 0.289490] RPC: Registered named UNIX socket transport module. [ 0.289503] RPC: Registered udp transport module. [ 0.289512] RPC: Registered tcp transport module. [ 0.289520] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.289534] PCI: CLS 0 bytes, default 64 [ 0.289973] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.292003] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.294091] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 0.294292] msgmni has been set to 967 [ 0.295074] io scheduler noop registered [ 0.295087] io scheduler deadline registered [ 0.295123] io scheduler cfq registered (default) [ 0.307721] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208 [ 0.307742] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 [ 0.431163] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps [ 0.999088] console [ttyPS0] enabled [ 1.003365] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000 [ 1.010989] [drm] Initialized drm 1.1.0 20060810 [ 1.027967] brd: module loaded [ 1.037283] loop: module loaded [ 1.046730] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [ 1.052556] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 1.060525] libphy: XEMACPS mii bus: probed [ 1.064893] ------------- phy_id = 0x3625e62 [ 1.069856] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54 [ 1.078459] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.085075] ehci-pci: EHCI PCI platform driver [ 1.092346] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing? [ 1.099183] usbcore: registered new interface driver usb-storage [ 1.106016] mousedev: PS/2 mouse device common for all mice [ 1.112150] i2c /dev entries driver [ 1.119119] zynq-edac f8006000.ps7-ddrc: ecc not enabled [ 1.124604] cpufreq_cpu0: failed to get cpu0 regulator: -19 [ 1.130534] Xilinx Zynq CpuIdle Driver started [ 1.135375] sdhci: Secure Digital Host Controller Interface driver [ 1.141524] sdhci: Copyright(c) Pierre Ossman [ 1.145806] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.152632] mmc0: no vqmmc regulator found [ 1.156642] mmc0: no vmmc regulator found [ 1.197465] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA [ 1.206159] usbcore: registered new interface driver usbhid [ 1.211667] usbhid: USB HID core driver [ 1.216382] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda [ 1.222683] nand: Micron MT29F2G08ABAEAWP [ 1.226646] nand: 256MiB, SLC, page size: 2048, OOB size: 64 [ 1.232582] Bad block table found at page 131008, version 0x01 [ 1.238805] Bad block table found at page 130944, version 0x01 [ 1.244856] 3 ofpart partitions found on MTD device pl353-nand [ 1.250637] Creating 3 MTD partitions on "pl353-nand": [ 1.255728] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel" [ 1.263770] 0x000002000000-0x00000b000000 : "angstram-rootfs" [ 1.271149] 0x00000b000000-0x000010000000 : "upgrade-rootfs" [ 1.280092] TCP: cubic registered [ 1.283327] NET: Registered protocol family 17 [ 1.288037] Registering SWP/SWPB emulation handler [ 1.293913] regulator-dummy: disabling [ 1.298282] UBI: attaching mtd1 to ubi0 [ 1.824480] UBI: scanning is finished [ 1.836038] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0 [ 1.843116] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes [ 1.849879] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 [ 1.856544] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096 [ 1.863421] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0 [ 1.869402] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128 [ 1.876510] UBI: max/mean erase counter: 52/24, WL threshold: 4096, image sequence number: 1283732989 [ 1.885725] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40 [ 1.894941] UBI: background thread "ubi_bgt0d" started, PID 1080 [ 1.894947] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.898902] ALSA device list: [ 1.898906] No soundcards found. [ 1.915294] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082 [ 1.975346] UBIFS: mounted UBI device 0, volume 0, name "rootfs" [ 1.981305] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes [ 1.990408] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs) [ 2.000293] UBIFS: reserved for root: 0 bytes (0 KiB) [ 2.005322] UBIFS: media format: w4/r0 (latest is w4/r0), UUID C72F8006-6DFF-46BA-BBE9-380960A89F92, small LPT model [ 2.016845] VFS: Mounted root (ubifs filesystem) on device 0:11. [ 2.024307] devtmpfs: mounted [ 2.027410] Freeing unused kernel memory: 204K (c06d2000 - c0705000) [ 2.864115] random: dd urandom read with 0 bits of entropy available [ 3.257493] [ 3.257493] bcm54xx_config_init [ 3.867492] [ 3.867492] bcm54xx_config_init [ 7.868322] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz [ 7.874428] xemacps e000b000.ps7-ethernet: link up (1000/FULL) [ 22.429478] In axi fpga driver! [ 22.432551] request_mem_region OK! [ 22.435941] AXI fpga dev virtual address is 0xdf9fc000 [ 22.441083] *base_vir_addr = 0x8c510 [ 22.456564] In fpga mem driver! [ 22.459689] request_mem_region OK! [ 22.463196] fpga mem virtual address is 0xe2000000 [ 23.256772] [ 23.256772] bcm54xx_config_init [ 23.886672] [ 23.886672] bcm54xx_config_init [ 27.887027] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz [ 27.893133] xemacps e000b000.ps7-ethernet: link up (1000/FULL) This is XILINX board. Totalram: 507527168 Detect 512MB control board of XILINX DETECT HW version=0008c510 miner ID : 8058f5c67680881c Miner Type = S9 AsicType = 1387 real AsicNum = 63 use critical mode to search freq... get PLUG ON=0x000000e0 Find hashboard on Chain[5] Find hashboard on Chain[6] Find hashboard on Chain[7] set_reset_allhashboard = 0x0000ffff Check chain[5] PIC fw version=0x03 Check chain[6] PIC fw version=0x03 Check chain[7] PIC fw version=0x03 chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[5] has freq in PIC and will jump over... Chain[5] has core num in PIC Chain[5] ASIC[1] has core num=1 Chain[5] ASIC[4] has core num=1 Chain[5] ASIC[17] has core num=15 Chain[5] ASIC[19] has core num=1 Chain[5] ASIC[46] has core num=1 Chain[5] ASIC[51] has core num=15 Chain[5] ASIC[59] has core num=1 Check chain[5] PIC fw version=0x03 chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[6] has freq in PIC and will jump over... Chain[6] has core num in PIC Chain[6] ASIC[32] has core num=15 Check chain[6] PIC fw version=0x03 chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] has freq in PIC, will disable freq setting. chain[7] has freq in PIC and will jump over... Chain[7] has core num in PIC Check chain[7] PIC fw version=0x03 get PIC voltage=6 on chain[5], value=940 get PIC voltage=6 on chain[6], value=940 get PIC voltage=6 on chain[7], value=940 set_reset_allhashboard = 0x00000000 chain[5] temp offset record: 62,0,0,0,0,0,35,28 chain[5] temp chip I2C addr=0x98 chain[5] has no middle temp, use special fix mode. chain[6] temp offset record: 62,0,0,0,0,0,35,28 chain[6] temp chip I2C addr=0x98 chain[6] has no middle temp, use special fix mode. chain[7] temp offset record: 62,0,0,0,0,0,35,28 chain[7] temp chip I2C addr=0x98 chain[7] has no middle temp, use special fix mode. set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 CRC error counter=0 set command mode to VIL
--- check asic number After Get ASIC NUM CRC error counter=0 set_baud=0 The min freq=700 set real timeout 52, need sleep=379392 After TEST CRC error counter=0 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 search freq for 1 times, completed chain = 3, total chain num = 3 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 restart Miner chance num=2 waiting for receive_func to exit! waiting for pic heart to exit! bmminer not found= 1964 root 0:00 grep bmminer
bmminer not found, restart bmminer ... This is user mode for mining Detect 512MB control board of XILINX Miner Type = S9 Miner compile time: Fri Nov 17 17:37:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 set_reset_allhashboard = 0x0000ffff miner ID : 8058f5c67680881c set_reset_allhashboard = 0x0000ffff Checking fans!get fan[2] speed=6120 get fan[2] speed=6120 get fan[2] speed=6120 get fan[2] speed=6120 get fan[2] speed=6120 get fan[2] speed=6120 get fan[5] speed=4560 get fan[2] speed=6120 get fan[5] speed=4560 get fan[2] speed=6120 get fan[5] speed=4560 chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J6] has backup chain_voltage=870 Check chain[5] PIC fw version=0x03 chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J7] has backup chain_voltage=870 Check chain[6] PIC fw version=0x03 chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] Detect: use voltage limit rules on single board! Detect: S9_63 use voltage level=1 : 1 Chain[J8] has backup chain_voltage=890 Check chain[7] PIC fw version=0x03 Chain[J6] orignal chain_voltage_pic=6 value=940 Chain[J6] will use backup chain_voltage_pic=870 [125] Chain[J6] get working chain_voltage_pic=125 Chain[J7] orignal chain_voltage_pic=6 value=940 Chain[J7] will use backup chain_voltage_pic=870 [125] Chain[J7] get working chain_voltage_pic=125 Chain[J8] orignal chain_voltage_pic=6 value=940 Chain[J8] will use backup chain_voltage_pic=890 [91] Chain[J8] get working chain_voltage_pic=91 set_reset_allhashboard = 0x0000ffff set_reset_allhashboard = 0x00000000 Chain[J6] has 63 asic Chain[J7] has 63 asic Chain[J8] has 57 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 57 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 57 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 57 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 57 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 55 asic set_reset_hashboard = 0x00000080 set_reset_hashboard = 0x00000000 retry Chain[J8] has 57 asic Chain[J6] has core num in PIC Chain[J6] ASIC[1] has core num=1 Chain[J6] ASIC[4] has core num=1 Chain[J6] ASIC[17] has core num=15 Chain[J6] ASIC[19] has core num=1 Chain[J6] ASIC[46] has core num=1 Chain[J6] ASIC[51] has core num=15 Chain[J6] ASIC[59] has core num=1 Chain[J7] has core num in PIC Chain[J7] ASIC[32] has core num=15 Chain[J8] has core num in PIC miner total rate=13901GH/s fixed rate=13500GH/s read PIC voltage=940 on chain[5] Chain:5 chipnum=63 Chain[J6] voltage added=0.0V Chain:5 temp offset=0 Chain:5 base freq=675 Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 Asic[16]:675 Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675 Asic[49]:675 Asic[50]:675 Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675 Chain:5 max freq=675 Chain:5 min freq=675
read PIC voltage=940 on chain[6] Chain:6 chipnum=63 Chain[J7] voltage added=0.0V Chain:6 temp offset=0 Chain:6 base freq=662 Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 Chain:6 max freq=662 Chain:6 min freq=662
read PIC voltage=940 on chain[7] Chain:7 chipnum=57 Chain[J8] voltage added=0.0V Chain:7 temp offset=0 Chain:7 base freq=631 Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Chain:7 max freq=631 Chain:7 min freq=631
Miner fix freq ... read PIC voltage=940 on chain[5] Chain:5 chipnum=63 Chain[J6] voltage added=0.0V Chain:5 temp offset=0 Chain:5 base freq=675 Asic[ 0]:675 Asic[ 1]:675 Asic[ 2]:675 Asic[ 3]:675 Asic[ 4]:675 Asic[ 5]:675 Asic[ 6]:675 Asic[ 7]:675 Asic[ 8]:675 Asic[ 9]:675 Asic[10]:675 Asic[11]:675 Asic[12]:675 Asic[13]:675 Asic[14]:675 Asic[15]:675 Asic[16]:675 Detect a bad chip=17 on chain[5], fixed to 400M Asic[17]:675 Asic[18]:675 Asic[19]:675 Asic[20]:675 Asic[21]:675 Asic[22]:675 Asic[23]:675 Asic[24]:675 Asic[25]:675 Asic[26]:675 Asic[27]:675 Asic[28]:675 Asic[29]:675 Asic[30]:675 Asic[31]:675 Asic[32]:675 Asic[33]:675 Asic[34]:675 Asic[35]:675 Asic[36]:675 Asic[37]:675 Asic[38]:675 Asic[39]:675 Asic[40]:675 Asic[41]:675 Asic[42]:675 Asic[43]:675 Asic[44]:675 Asic[45]:675 Asic[46]:675 Asic[47]:675 Asic[48]:675 Asic[49]:675 Asic[50]:675 Detect a bad chip=51 on chain[5], fixed to 400M Asic[51]:675 Asic[52]:675 Asic[53]:675 Asic[54]:675 Asic[55]:675 Asic[56]:675 Asic[57]:675 Asic[58]:675 Asic[59]:675 Asic[60]:675 Asic[61]:675 Asic[62]:675 Chain:5 max freq=675 Chain:5 min freq=675
read PIC voltage=940 on chain[6] Chain:6 chipnum=63 Chain[J7] voltage added=0.0V Chain:6 temp offset=0 Chain:6 base freq=662 Asic[ 0]:662 Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662 Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662 Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662 Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Detect a bad chip=32 on chain[6], fixed to 400M Asic[32]:662 Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662 Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662 Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662 Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662 Chain:6 max freq=662 Chain:6 min freq=662
read PIC voltage=940 on chain[7] Chain:7 chipnum=57 Chain[J8] voltage added=0.0V Chain:7 temp offset=0 Chain:7 base freq=631 Asic[ 0]:631 Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631 Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631 Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631 Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631 Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631 Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631 Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Chain:7 max freq=631 Chain:7 min freq=631
max freq = 675 set baud=1 Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28 chain[5] temp chip I2C addr=0x98 chain[5] has no middle temp, use special fix mode. Chain[J6] chip[244] use PIC middle temp offset=0 typeID=00 Warning: Chain[J6] has no temp offset in PIC! will fix it Chain[J6] use default temp chip[244] Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x98) Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9A) Chain[J6] try read temp chip[244] ID=00 (I2C addr=0x9C) Warning: Chain[5] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27 New offset Chain[5] chip[244] local:-64 remote:0 offset:27 Chain[J6] chip[244] get middle temp offset=27 typeID=00 Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28 chain[6] temp chip I2C addr=0x98 chain[6] has no middle temp, use special fix mode. Chain[J7] chip[244] use PIC middle temp offset=0 typeID=00 Warning: Chain[J7] has no temp offset in PIC! will fix it Chain[J7] use default temp chip[244] Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x98) Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9A) Chain[J7] try read temp chip[244] ID=00 (I2C addr=0x9C) Warning: Chain[6] chip[244] local:-64 remote:0 offset:-42, will fixed offset=27 New offset Chain[6] chip[244] local:-64 remote:0 offset:27 Chain[J7] chip[244] get middle temp offset=27 typeID=00 single board rate=4690 voltage limit=870 on chain[5] get PIC voltage=870 on chain[5], check: must be < 870 retryFlag=1 will set the voltage limited on chain[5], change voltage=870 now set pic voltage=125 on chain[5] single board rate=4679 voltage limit=870 on chain[6] get PIC voltage=870 on chain[6], check: must be < 870 retryFlag=1 will set the voltage limited on chain[6], change voltage=870 now set pic voltage=125 on chain[6] single board rate=4531 voltage limit=890 on chain[7] get PIC voltage=890 on chain[7], check: must be < 890 retryFlag=1 will set the voltage limited on chain[7], change voltage=890 now set pic voltage=91 on chain[7] Chain[J6] set working voltage=870 [125] Chain[J7] set working voltage=870 [125] Chain[J8] set working voltage=890 [91] do heat board 8xPatten for 1 times start send works on chain[5] start send works on chain[6] start send works on chain[7] do read_temp_func once... do check_asic_reg 0x08 Done check_asic_reg do read temp on Chain[5] Chain[5] Chip[62] TempTypeID=00 middle offset=27 read failed, old value: Chain[5] Chip[62] local Temp=0 read failed on Chain[5] Chip[62] middle Temp old value:15 Special fix Chain[5] Chip[62] middle Temp = 15 Done read temp on Chain[5] do read temp on Chain[6] Chain[6] Chip[62] TempTypeID=00 middle offset=27 read failed, old value: Chain[6] Chip[62] local Temp=0 read failed on Chain[6] Chip[62] middle Temp old value:15 Special fix Chain[6] Chip[62] middle Temp = 15 Done read temp on Chain[6] do read temp on Chain[7] Done read temp on Chain[7] Set fixed full fan speed FAN PWM: 100 read_temp_func Done! CRC error counter=12487
Anyone know why the gh/s rate is so low? My other antminer's gh/s averages 13,615. Here is a screenshot of the summary. https://ibb.co/wC5FZy3
|