Cuda error in cudaprogram.cu:388

[Elegidenka]

Hi, thanks for the help first of all;

I am just new on this, asking for help for the error: https://ibb.co/bHKDdgL

I have windows 10, Nvidia version is 461.40, Cuda drivers, and my config are just two 1660 Super.

For some reason, I get only this problem when I have the two of them connected. I took one away and it's not happening anymore, mines perfectly then but just one.

I taught could be the graphic card but I tested all of them separately and work perfectly.

I also tried to add my config to a rig with 5 3070 as the last one and also the same error, Out of memory.

Any ideas of what could be?

Thank you again

[Sledge0001]

Hi, thanks for the help first of all;

I am just new on this, asking for help for the error: https://ibb.co/bHKDdgL

I have windows 10, Nvidia version is 461.40, Cuda drivers, and my config are just two 1660 Super.

For some reason, I get only this problem when I have the two of them connected. I took one away and it's not happening anymore, mines perfectly then but just one.

I taught could be the graphic card but I tested all of them separately and work perfectly.

I also tried to add my config to a rig with 5 3070 as the last one and also the same error, Out of memory.

Any ideas of what could be?

Thank you again

Add more disk space to your page file.

[Elegidenka]

Hi, thanks for the reply,

I belive your talking about virtual memory?

Should I put "no paging file" in the options menu or just a crazy number like 200.000?

If you say that might be the problem I will try again that way.

Thank you

[Sledge0001]

Yes the virtual memory.

DO NOT SET TO NO PAGING FILE!

You should have at least the same amount allocated as you have in your graphics cards.

If you have 2 x 8GB cards make sure that you have at least 16GB allocated on your disk to keep things happy!

[Elegidenka]

I  have 4 gigabytes of DDR4, Should be enough RAM for the Asus prime Z390-P, if I want to run7 graphic cards?

Currently, I have 5 3070 and 2 1660 super.

My disc is SSD 250 ,more than empty besides Windows

How should I config that memory in my case?

[Sledge0001]

I  have 4 gigabytes of DDR4, Should be enough RAM for the Asus prime Z390-P, if I want to run7 graphic cards?

Currently, I have 5 3070 and 2 1660 super.

My disc is SSD 250 ,more than empty besides Windows

How should I config that memory in my case?

Based on your setup:

5 x 3070's each with 8GB  = 40GB
2 x 1660's each with 6GB =  12GB
So a total of 52GB Minimum...  So enter 52000 at the minimum...

[Elegidenka]

Thank you so much, I did not know that work this way.

Thank you