[ANN] NSF Miner - ethereum miner without fee [AMD+Nvidia/Windows+Linux]

[Yurizhai]

Do you have any suggestions for what new to add to the miner?

Some information about the GPU (temperature, fan speed, power draw...) would be nice.

This.

these functions will be possible in future updates

[Yurizhai]

More information coming soon, follow the project

[Yurizhai]

Also, you can see your question of interest here: https://github.com/no-fee-ethereum-mining/nsfminer/issues?q=is%3Aissue+is%3Aclosed
If you encounter an error or want some new function, open the topic there as well.

[Yurizhai]

Everyone who checked the miner is asked to share a review on its use. Desirable hashrate on your video card, how much was in the test and your wishes and comments

[CrashX]

Everyone who checked the miner is asked to share a review on its use. Desirable hashrate on your video card, how much was in the test and your wishes and comments

in the testing process, I will write down how the results will be

[Yurizhai]

Everyone who checked the miner is asked to share a review on its use. Desirable hashrate on your video card, how much was in the test and your wishes and comments

in the testing process, I will write down how the results will be

are there any preliminary results?

[MRKLYE]

Excuse my ignorance... But nothing is free... What is the catch to using this software?

[Yurizhai]

UPD
New version added

Release Notes:

-Lower compiler optimizations to safer level
-Effective hash rate (option -v4) calculations working for stratum2.
-Fix nvml.dll search for NV GPUs.
-Use single DAG instead of split DAG on AMD drivers that allow greater than 4GB allocation.
-Handle f2pool out-of-spec. messages.

[skablast]

If I make a bat with NSFminer --help

and it didn't start
and I receive message that:
Setup was unable to automatically close all application. It is recommended that you close all application using files that need to be updated.

WHich application its referring to ?

[Yurizhai]

If I make a bat with NSFminer --help

and it didn't start
and I receive message that:
Setup was unable to automatically close all application. It is recommended that you close all application using files that need to be updated.

WHich application its referring to ?

try running version 1.3.7

[logicalray77]

Figure out how to "fool" these new RTX cards to mine full speed and you will have instant client base lol

[skablast]

1.37 doesn't work
1.34 ........ does

What I have to do in order to have
1.38 to work ?
 

[Yurizhai]

1.37 doesn't work
1.34 ........ does

What I have to do in order to have
1.38 to work ?
 

write the system on which you run the miner

[skablast]

Win 64 Pro 240 GB SSD 32 GB Virtual memory

I-3 6100 8Gb Ram
Asus Pro Carbon Z170 MB

1 Rx470 8gb Nitro
3 RX570 4 GB Sapphire
everything on Risers

AMd driver : 20.1.2

[nsummy]

Ok I just gave this a spin, thanks for the work on this by the way.  Tested on 1.38 (Windows)

I have a 1660 Super and a 5600xt.  When I launch the miner it says no opencl devices found.  It does find my nvidia card however.
On Phoenix miner I get 30.215 MH/S.  On NSFMiner I get 29.97, so its comparable.  I didn't test the power output or anything like that.

I would recommend putting some example bat files in with the release archives.  Most people are too lazy or confused to read the documentation and create on themselves  

[Yurizhai]

Ok I just gave this a spin, thanks for the work on this by the way.  Tested on 1.38 (Windows)

I have a 1660 Super and a 5600xt.  When I launch the miner it says no opencl devices found.  It does find my nvidia card however.
On Phoenix miner I get 30.215 MH/S.  On NSFMiner I get 29.97, so its comparable.  I didn't test the power output or anything like that.

I would recommend putting some example bat files in with the release archives.  Most people are too lazy or confused to read the documentation and create on themselves  

pretty good results, given that the miner has no commission, as compared to the phoenix

[dedizonesv2]

Do you have any suggestions for what new to add to the miner?

Some information about the GPU (temperature, fan speed, power draw...) would be nice.

hello,

My résult: 2 rig same config | 1 T-REX - 1 NSF

Code:

ETHminer: 320 share 1h10 |362Mhs
T-Rex: 330 shares 1H10 | 366 Mhs
ETHminer NFS: 350 share 1h10 |362Mhs


t-rex v.0.19.11 A 345 1H15
ethminer-NFS A 360 1H15

------------

t-rex v.0.19.11 A 315 1H15
ethminer-NFS A 350 1H15

------------

t-rex v.0.19.11 A 627 2H15
=26.31$ | 0.01671 ETH

ethminer-NFS A 624 2H15
=38.07$ | 0.0243 ETH

------------

I try with 1  ASUS TUF 3070:

NFS - 60.88MHS
T-rex - 61.70MHS

But T-rex 1% Fee => 60.88 + 1% = 61.48Mhs

So between the software with fee and NFS it is for me the same or even sometimes more efficient.
Because with Gminer, Trex or Phoenix the hashrate is increased but it is to pay their Fee in reality ...

I use it I have 19 Nvidia 3060Ti and 3070 cards.
We have a few badshare from time to time, do you do a CPU checks like the others in order to avoid badshare?

Then, possible to add DAG sequential initialization and the way it builds in order to avoid corrupted and bad-share DAGs, I have a RIG of 10 cards and its load the dag of 10 cards in 1 time.

Otherwise good work.

[Yurizhai]

Do you have any suggestions for what new to add to the miner?

Some information about the GPU (temperature, fan speed, power draw...) would be nice.

hello,

My résult: 2 rig same config | 1 T-REX - 1 NSF

Code:

ETHminer: 320 share 1h10 |362Mhs
T-Rex: 330 shares 1H10 | 366 Mhs
ETHminer NFS: 350 share 1h10 |362Mhs


t-rex v.0.19.11 A 345 1H15
ethminer-NFS A 360 1H15

------------

t-rex v.0.19.11 A 315 1H15
ethminer-NFS A 350 1H15

------------

t-rex v.0.19.11 A 627 2H15
=26.31$ | 0.01671 ETH

ethminer-NFS A 624 2H15
=38.07$ | 0.0243 ETH

------------

I try with 1  ASUS TUF 3070:

NFS - 60.88MHS
T-rex - 61.70MHS

But T-rex 1% Fee => 60.88 + 1% = 61.48Mhs

So between the software with fee and NFS it is for me the same or even sometimes more efficient.
Because with Gminer, Trex or Phoenix the hashrate is increased but it is to pay their Fee in reality ...

I use it I have 19 Nvidia 3060Ti and 3070 cards.
We have a few badshare from time to time, do you do a CPU checks like the others in order to avoid badshare?

Then, possible to add DAG sequential initialization and the way it builds in order to avoid corrupted and bad-share DAGs, I have a RIG of 10 cards and its load the dag of 10 cards in 1 time.

Otherwise good work.

thanks for the info, this is useful data

[nsummy]

Ok I just gave this a spin, thanks for the work on this by the way.  Tested on 1.38 (Windows)

I have a 1660 Super and a 5600xt.  When I launch the miner it says no opencl devices found.  It does find my nvidia card however.
On Phoenix miner I get 30.215 MH/S.  On NSFMiner I get 29.97, so its comparable.  I didn't test the power output or anything like that.

I would recommend putting some example bat files in with the release archives.  Most people are too lazy or confused to read the documentation and create on themselves  

pretty good results, given that the miner has no commission, as compared to the phoenix

Any idea why it wouldn't recognize the AMD card?

[nsummy]

Excuse my ignorance... But nothing is free... What is the catch to using this software?

There is plenty of free mining software out there.  Hell plenty of free software in general.  There isn't always a catch.  2 free projects off the top of my head:  ccminer and cpuminer-opt