pasqualino (OP)
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 08, 2021, 09:36:24 AM Last edit: March 09, 2021, 01:24:15 AM by frodocooper |
|
hi i have problems with 8 s17 +, how can i fix them? I have tried everything and more, I hope for your advice, this is a kernel card from one of the 8 miners. Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12904K (cce67000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 28/14, WL threshold: 4096, image sequence number: 237714726 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 1581/449, WL threshold: 4096, image sequence number: 3265111179 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2021-03-07 17:28:04 driver-btm-api.c:779:init_freq_mode: This is scan-user version 2021-03-07 17:28:04 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1 2021-03-07 17:28:04 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1 2021-03-07 17:28:04 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0 2021-03-07 17:28:04 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+ 2021-03-07 17:28:04 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21 2021-03-07 17:28:04 driver-btm-api.c:2083:show_sn: len:16, 8108a5064e104814 2021-03-07 17:28:04 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1 2021-03-07 17:28:04 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1 2021-03-07 17:28:04 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 8108a5064e104814 2021-03-07 17:28:04 fan.c:284:front_fan_power_on: Note: front fan is power on! 2021-03-07 17:28:04 fan.c:296:rear_fan_power_on: Note: rear fan is power on! 2021-03-07 17:28:04 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX 2021-03-07 17:28:04 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2021-03-07 17:28:10 driver-btm-api.c:1239:init_miner_version: miner ID : 8108a5064e104814 2021-03-07 17:28:10 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023 2021-03-07 17:28:15 driver-btm-api.c:837:get_product_id: product_id[0] = 0 2021-03-07 17:28:15 driver-btm-api.c:837:get_product_id: product_id[1] = 0 2021-03-07 17:28:15 driver-btm-api.c:837:get_product_id: product_id[2] = 0 2021-03-07 17:28:15 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled 2021-03-07 17:28:15 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data. 2021-03-07 17:28:15 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0 2021-03-07 17:28:15 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0 2021-03-07 17:28:15 thread.c:1363:create_read_nonce_reg_thread: create thread 2021-03-07 17:28:21 driver-btm-api.c:1239:init_miner_version: miner ID : 8108a5064e104814 2021-03-07 17:28:21 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023 2021-03-07 17:28:27 driver-btm-api.c:837:get_product_id: product_id[0] = 0 2021-03-07 17:28:27 driver-btm-api.c:837:get_product_id: product_id[1] = 0 2021-03-07 17:28:27 driver-btm-api.c:837:get_product_id: product_id[2] = 0 2021-03-07 17:28:27 driver-btm-api.c:792:_set_project_type: project:0 2021-03-07 17:28:27 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+ 2021-03-07 17:28:27 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2021-03-07 17:28:27 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2021-03-07 17:28:27 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2021-03-07 17:28:27 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2021-03-07 17:28:27 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2021-03-07 17:28:27 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2021-03-07 17:28:27 driver-btm-api.c:2372:bitmain_board_init: Fan check passed. 2021-03-07 17:28:28 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2021-03-07 17:28:30 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2021-03-07 17:28:31 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2021-03-07 17:28:33 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2021-03-07 17:28:34 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2021-03-07 17:28:36 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2021-03-07 17:28:36 thread.c:1358:create_pic_heart_beat_thread: create thread 2021-03-07 17:28:36 power_api.c:213:power_init: Power init: 2021-03-07 17:28:36 power_api.c:214:power_init: current_voltage_raw = 0 2021-03-07 17:28:36 power_api.c:215:power_init: highest_voltage_raw = 2100 2021-03-07 17:28:36 power_api.c:216:power_init: working_voltage_raw = 1950 2021-03-07 17:28:36 power_api.c:217:power_init: higher_voltage_raw = 2040 2021-03-07 17:28:36 power_api.c:218:power_init: check_asic_voltage_raw = 2100 2021-03-07 17:28:36 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2021-03-07 17:28:36 power_api.c:186:power_off: init gpio907 2021-03-07 17:29:08 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step. 2021-03-07 17:29:34 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:29:35 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.216667 2021-03-07 17:29:36 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.167949 2021-03-07 17:29:37 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.165172 2021-03-07 17:29:37 power_api.c:53:_get_avg_voltage: average_voltage = 21.183263 2021-03-07 17:29:37 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.18, check voltage passed. 2021-03-07 17:29:37 uart.c:72:set_baud: set fpga_baud to 115200 2021-03-07 17:29:48 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 0 2021-03-07 17:29:59 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 1 2021-03-07 17:30:10 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 2 2021-03-07 17:30:10 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2021-03-07 17:30:18 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 3 2021-03-07 17:30:18 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050 2021-03-07 17:30:18 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step. 2021-03-07 17:30:22 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:30:24 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.705128 2021-03-07 17:30:25 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.656410 2021-03-07 17:30:26 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.654288 2021-03-07 17:30:26 power_api.c:53:_get_avg_voltage: average_voltage = 20.671942 2021-03-07 17:30:26 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.67, check voltage passed. chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2021-03-07 17:30:35 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 4 2021-03-07 17:30:35 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000 2021-03-07 17:30:35 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step. 2021-03-07 17:30:38 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:30:39 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.193590 2021-03-07 17:30:40 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.169231 2021-03-07 17:30:41 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.143405 2021-03-07 17:30:41 power_api.c:53:_get_avg_voltage: average_voltage = 20.168742 2021-03-07 17:30:41 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.17, check voltage passed. chain 0, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2021-03-07 17:30:50 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[0]: find 0 asic, times 5 2021-03-07 17:30:50 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 2021-03-07 17:30:50 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step. 2021-03-07 17:30:55 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:30:56 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 21.165172 2021-03-07 17:30:57 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.143590 2021-03-07 17:30:58 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.140844 2021-03-07 17:30:58 power_api.c:53:_get_avg_voltage: average_voltage = 21.149869 2021-03-07 17:30:58 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.15, check voltage passed. 2021-03-07 17:30:58 driver-btm-api.c:1193:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0 2021-03-07 17:30:59 driver-btm-api.c:1195:check_asic_number: Chain 0 voltage: an0 = 2.803226, an2 2.806452, an6 2.516129. 2021-03-07 17:31:11 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 0 2021-03-07 17:31:22 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 1 2021-03-07 17:31:33 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 2 2021-03-07 17:31:33 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2021-03-07 17:31:41 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 3 2021-03-07 17:31:41 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050 2021-03-07 17:31:41 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step. 2021-03-07 17:31:45 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:31:46 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.629960 2021-03-07 17:31:47 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.654288 2021-03-07 17:31:47 power_api.c:53:_get_avg_voltage: average_voltage = 20.642124 2021-03-07 17:31:47 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.64, check voltage passed. chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2021-03-07 17:31:56 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 4 2021-03-07 17:31:56 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000 2021-03-07 17:31:56 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step. 2021-03-07 17:31:59 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:32:00 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.143405 2021-03-07 17:32:01 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.167733 2021-03-07 17:32:01 power_api.c:53:_get_avg_voltage: average_voltage = 20.155569 2021-03-07 17:32:01 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 20.16, check voltage passed. chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2021-03-07 17:32:10 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[1]: find 0 asic, times 5 2021-03-07 17:32:10 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 2021-03-07 17:32:10 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step. 2021-03-07 17:32:15 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:32:16 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.140844 2021-03-07 17:32:17 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.140844 2021-03-07 17:32:17 power_api.c:53:_get_avg_voltage: average_voltage = 21.140844 2021-03-07 17:32:17 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.14, check voltage passed. 2021-03-07 17:32:17 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1 2021-03-07 17:32:18 driver-btm-api.c:1195:check_asic_number: Chain 1 voltage: an0 = 2.793548, an2 2.803226, an6 2.519355. 2021-03-07 17:32:30 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0 2021-03-07 17:32:33 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003 2021-03-07 17:32:33 driver-btm-api.c:435:set_order_clock: chain[2]: set order clock, stragegy 3 2021-03-07 17:32:33 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2021-03-07 17:32:33 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6 2021-03-07 17:32:34 voltage[2] = 1960 2021-03-07 17:32:34 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1960 2021-03-07 17:32:35 temperature.c:340:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218 2021-03-07 17:32:35 uart.c:72:set_baud: set fpga_baud to 12000000 2021-03-07 17:32:35 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 20 2021-03-07 17:32:35 thread.c:1378:create_check_miner_status_thread: create thread 2021-03-07 17:32:35 thread.c:1368:create_show_miner_status_thread: create thread 2021-03-07 17:32:35 thread.c:1348:create_temperature_monitor_thread: create thread 2021-03-07 17:32:35 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 20 dec_freq_index=0 2021-03-07 17:32:35 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650 2021-03-07 17:32:35 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work. 2021-03-07 17:32:35 thread.c:1338:create_asic_status_monitor_thread: create thread 2021-03-07 17:32:35 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 505, is_higher_voltage = true 2021-03-07 17:33:26 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step. 2021-03-07 17:33:28 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:33:29 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.016624 2021-03-07 17:33:29 power_api.c:53:_get_avg_voltage: average_voltage = 21.016624 2021-03-07 17:33:29 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 21.02, check voltage passed. 2021-03-07 17:35:04 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2080, step by step. 2021-03-07 17:35:05 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:35:07 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.870844 2021-03-07 17:35:07 power_api.c:53:_get_avg_voltage: average_voltage = 20.870844 2021-03-07 17:35:07 power_api.c:71:check_voltage: target_vol = 20.80, actural_vol = 20.87, check voltage passed. 2021-03-07 17:35:47 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2060, step by step. 2021-03-07 17:35:49 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:35:50 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.676471 2021-03-07 17:35:50 power_api.c:53:_get_avg_voltage: average_voltage = 20.676471 2021-03-07 17:35:50 power_api.c:71:check_voltage: target_vol = 20.60, actural_vol = 20.68, check voltage passed. 2021-03-07 17:37:51 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2030, step by step. 2021-03-07 17:37:53 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:37:54 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.384910 2021-03-07 17:37:54 power_api.c:53:_get_avg_voltage: average_voltage = 20.384910 2021-03-07 17:37:54 power_api.c:71:check_voltage: target_vol = 20.30, actural_vol = 20.38, check voltage passed. 2021-03-07 17:37:54 frequency.c:1181:inc_asic_diff_freq_by_steps: chain = 2, start = 505, freq_step = 5 2021-03-07 17:38:01 driver-btm-api.c:765:set_timeout: freq = 555, percent = 90, hcn = 44236, timeout = 79 2021-03-07 17:38:01 frequency.c:1429:check_initial_temperature_status: need to set higer voltage,vol_higher:2060,vol_limit:2100 2021-03-07 17:38:01 power_api.c:232:set_higher_voltage_raw: higher_voltage_raw = 2060 2021-03-07 17:38:01 power_api.c:338:set_to_higher_voltage_by_steps: Set to voltage raw 2060, step by step. 2021-03-07 17:38:02 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:38:03 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.652174 2021-03-07 17:38:03 power_api.c:53:_get_avg_voltage: average_voltage = 20.652174 2021-03-07 17:38:03 power_api.c:71:check_voltage: target_vol = 20.60, actural_vol = 20.65, check voltage passed. 2021-03-07 17:38:03 thread.c:1373:create_check_system_status_thread: create thread 2021-03-07 17:38:04 driver-btm-api.c:2618:bitmain_soc_init: Init done! 2021-03-07 17:38:04 driver-btm-api.c:222:set_miner_status: STATUS_INIT 2021-03-07 17:38:09 driver-btm-api.c:222:set_miner_status: STATUS_OKAY 2021-03-07 17:38:10 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 22954 2021-03-07 17:38:10 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 22000 2021-03-07 17:38:14 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-07 17:38:14 driver-btm-api.c:1644:dhash_chip_send_job: stime.tv_sec 1615138694, block_ntime 1615138666 2021-03-07 17:48:18 thread.c:506:check_working_voltage: current PCB min temperature is 41 2021-03-07 17:48:18 thread.c:507:check_working_voltage: current voltage is 2060, recovery to 1960 2021-03-07 17:48:18 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1960, step by step. 2021-03-07 17:48:23 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-07 17:48:24 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.630905 2021-03-07 17:48:24 power_api.c:53:_get_avg_voltage: average_voltage = 19.630905 2021-03-07 17:48:24 power_api.c:71:check_voltage: target_vol = 19.60, actural_vol = 19.63, check voltage passed. 2021-03-07 18:12:08 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-07 18:12:19 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-07 18:18:24 thread.c:259:calc_hashrate_avg: avg rate is 23079.25 in 40 mins 2021-03-07 18:18:24 temperature.c:516:temp_statistics_show: pcb temp 42~63 chip temp 67~80 2021-03-07 18:48:25 thread.c:259:calc_hashrate_avg: avg rate is 23339.44 in 30 mins 2021-03-07 18:48:25 temperature.c:516:temp_statistics_show: pcb temp 42~62 chip temp 66~79 2021-03-07 19:18:25 thread.c:259:calc_hashrate_avg: avg rate is 23318.68 in 30 mins 2021-03-07 19:18:25 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 66~79 2021-03-07 19:48:26 thread.c:259:calc_hashrate_avg: avg rate is 23293.15 in 30 mins 2021-03-07 19:48:26 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 66~80 2021-03-07 20:18:27 thread.c:259:calc_hashrate_avg: avg rate is 23320.51 in 30 mins 2021-03-07 20:18:27 temperature.c:516:temp_statistics_show: pcb temp 42~63 chip temp 66~79 2021-03-07 20:48:28 thread.c:259:calc_hashrate_avg: avg rate is 23368.74 in 30 mins 2021-03-07 20:48:28 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 66~79 2021-03-07 21:09:31 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-07 21:09:45 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-07 21:18:29 thread.c:259:calc_hashrate_avg: avg rate is 22887.67 in 30 mins 2021-03-07 21:18:29 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 65~80 2021-03-07 21:48:30 thread.c:259:calc_hashrate_avg: avg rate is 23278.39 in 30 mins 2021-03-07 21:48:30 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 66~80 2021-03-07 22:18:30 thread.c:259:calc_hashrate_avg: avg rate is 23331.03 in 30 mins 2021-03-07 22:18:30 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 65~79 2021-03-07 22:48:31 thread.c:259:calc_hashrate_avg: avg rate is 23408.43 in 30 mins 2021-03-07 22:48:31 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 65~80 2021-03-07 23:18:32 thread.c:259:calc_hashrate_avg: avg rate is 23219.17 in 30 mins 2021-03-07 23:18:32 temperature.c:516:temp_statistics_show: pcb temp 41~64 chip temp 66~80 2021-03-07 23:48:33 thread.c:259:calc_hashrate_avg: avg rate is 23375.46 in 30 mins 2021-03-07 23:48:33 temperature.c:516:temp_statistics_show: pcb temp 40~62 chip temp 65~79 2021-03-08 00:18:34 thread.c:259:calc_hashrate_avg: avg rate is 23364.47 in 30 mins 2021-03-08 00:18:34 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 65~79 2021-03-08 00:48:34 thread.c:259:calc_hashrate_avg: avg rate is 23220.46 in 30 mins 2021-03-08 00:48:34 temperature.c:516:temp_statistics_show: pcb temp 41~62 chip temp 66~80 2021-03-08 01:09:27 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-08 01:09:56 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-08 01:18:35 thread.c:259:calc_hashrate_avg: avg rate is 22823.57 in 30 mins 2021-03-08 01:18:35 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 65~79 2021-03-08 01:48:36 thread.c:259:calc_hashrate_avg: avg rate is 23112.33 in 30 mins 2021-03-08 01:48:36 temperature.c:516:temp_statistics_show: pcb temp 41~64 chip temp 66~79 2021-03-08 02:18:37 thread.c:259:calc_hashrate_avg: avg rate is 23077.53 in 30 mins 2021-03-08 02:18:37 temperature.c:516:temp_statistics_show: pcb temp 42~63 chip temp 66~80 2021-03-08 02:48:38 thread.c:259:calc_hashrate_avg: avg rate is 23358.36 in 30 mins 2021-03-08 02:48:38 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 65~80 2021-03-08 03:18:39 thread.c:259:calc_hashrate_avg: avg rate is 23380.34 in 30 mins 2021-03-08 03:18:39 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 65~81 2021-03-08 03:48:39 thread.c:259:calc_hashrate_avg: avg rate is 23362.03 in 30 mins 2021-03-08 03:48:39 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 65~80 2021-03-08 04:18:40 thread.c:259:calc_hashrate_avg: avg rate is 23417.15 in 30 mins 2021-03-08 04:18:40 temperature.c:516:temp_statistics_show: pcb temp 40~62 chip temp 65~80 2021-03-08 04:48:41 thread.c:259:calc_hashrate_avg: avg rate is 23295.48 in 30 mins 2021-03-08 04:48:41 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 64~80 2021-03-08 05:08:14 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-08 05:08:15 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-08 05:18:42 thread.c:259:calc_hashrate_avg: avg rate is 23359.59 in 30 mins 2021-03-08 05:18:42 temperature.c:516:temp_statistics_show: pcb temp 41~63 chip temp 65~81 2021-03-08 05:48:43 thread.c:259:calc_hashrate_avg: avg rate is 23402.93 in 30 mins 2021-03-08 05:48:43 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 64~80 2021-03-08 06:18:44 thread.c:259:calc_hashrate_avg: avg rate is 23423.08 in 30 mins 2021-03-08 06:18:44 temperature.c:516:temp_statistics_show: pcb temp 41~64 chip temp 67~81 2021-03-08 06:48:44 thread.c:259:calc_hashrate_avg: avg rate is 23262.00 in 30 mins 2021-03-08 06:48:44 temperature.c:516:temp_statistics_show: pcb temp 40~63 chip temp 65~80 2021-03-08 07:18:45 thread.c:259:calc_hashrate_avg: avg rate is 23379.73 in 30 mins 2021-03-08 07:18:45 temperature.c:516:temp_statistics_show: pcb temp 44~64 chip temp 65~79 2021-03-08 07:48:46 thread.c:259:calc_hashrate_avg: avg rate is 23714.90 in 30 mins 2021-03-08 07:48:46 temperature.c:516:temp_statistics_show: pcb temp 44~63 chip temp 67~80 2021-03-08 08:18:47 thread.c:259:calc_hashrate_avg: avg rate is 23240.54 in 30 mins 2021-03-08 08:18:47 temperature.c:516:temp_statistics_show: pcb temp 44~64 chip temp 66~79 2021-03-08 08:48:48 thread.c:259:calc_hashrate_avg: avg rate is 23332.72 in 30 mins 2021-03-08 08:48:48 temperature.c:516:temp_statistics_show: pcb temp 45~64 chip temp 66~80 2021-03-08 09:09:35 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-08 09:09:43 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-08 09:18:49 thread.c:259:calc_hashrate_avg: avg rate is 23086.69 in 30 mins 2021-03-08 09:18:49 temperature.c:516:temp_statistics_show: pcb temp 45~64 chip temp 66~80
|
|
|
|
wndsnb
|
|
March 08, 2021, 01:59:38 PM Last edit: March 09, 2021, 01:26:18 AM by frodocooper |
|
2021-03-07 17:30:58 driver-btm-api.c:1193:check_asic_number: Chain 0 only find 0 asic, will power off hash board 0 2021-03-07 17:32:17 driver-btm-api.c:1193:check_asic_number: Chain 1 only find 0 asic, will power off hash board 1 2021-03-07 17:32:30 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 65 asic, times 0
The " find 0 asic" message means the control board is not able to communicate with the asics, which normally means there is a failed chip or faulty connection somewhere on the boards. You've got 2 boards that give this message, the 3rd seems fine. I'd try unplugging the ribbon cable going into chain 2 (which I believe is the furthest from the PSU on an S17+) and test the chain 0 and chain 1 boards individually with that cable to rule out a control board or ribbon cable issue. And before you do that, you might want to just shake the miner and listen for loose heatsinks. If you hear something loose jingling around in there, no point in testing any further. If that is the case, you'd need to re-attach those heatsinks before going any further. Most likely you'll need to find someone who can repair them, check this post. You can also read through this post, there are a number of things you can try to fix them yourself, but I'm not sure how often any of those actually work, or how long they'd work. Also, when posting logs, please use the "Insert Code" (#) button.
|
Have some dead Bitmain 17 series hashboards or full miners? I'll buy them ... send me a PM with what you have and I'll make you an offer!
|
|
|
mikeywith
Legendary
Offline
Activity: 2240
Merit: 6405
be constructive or S.T.F.U
|
|
March 08, 2021, 09:07:54 PM |
|
I was going to respond to your PM but then I saw this post, sorry for the delay. The short version of the story is you have two dead boards and only one works fine, did you just buy the miner used? also, keep in mind sometimes if the PSU is bad it could result in the same error, but in most cases, it's just a bad hashboard that's beyond a simple fix.
Are the rest of the miners you have giving you the same error? I suggest you post about them 1 by 1, don't create a new topic but 1 post per miner in this topic, wait for members to respond, troubleshoot, and move on to the next one, this way you keep it simple and easy for us to follow and won't spam the support board.
|
|
|
|
pasqualino (OP)
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 09, 2021, 08:49:11 AM Last edit: March 09, 2021, 11:18:58 PM by frodocooper |
|
thank you very much, now I am attaching this other machine. I wanted to clarify that I bought the miners new but I tried to exploit them by service or even less to recover as much as possible. Do you think I can change hasbord from one machine to another in order to try to make 2-3 machines work at full capacity so in the meantime I repair the other hasboards? Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 203432K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 25944K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 12904K (cce67000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 18/8, WL threshold: 4096, image sequence number: 237714726 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): recovery needed UBIFS (ubi0:0): recovery completed UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID FF09433B-E002-4C29-97EC-6220DDC4BB36, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 669/119, WL threshold: 4096, image sequence number: 3265111179 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): recovery needed UBIFS (ubi1:0): recovery completed UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 1AF6F1E1-61F0-462C-AE44-C7D9596CF7E2, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb38000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 random: nonblocking pool is initialized 2021-03-08 10:37:08 driver-btm-api.c:779:init_freq_mode: This is scan-user version 2021-03-08 10:37:08 driver-btm-api.c:2451:bitmain_soc_init: opt_multi_version = 1 2021-03-08 10:37:08 driver-btm-api.c:2452:bitmain_soc_init: opt_bitmain_ab = 1 2021-03-08 10:37:08 driver-btm-api.c:2453:bitmain_soc_init: opt_bitmain_work_mode = 0 2021-03-08 10:37:08 driver-btm-api.c:2454:bitmain_soc_init: Miner compile time: Tue Jun 2 10:31:07 CST 2020 type: Antminer S17+ 2021-03-08 10:37:08 driver-btm-api.c:2455:bitmain_soc_init: commit version: 1ca50a5 2020-06-01 18:51:22, build by: lol 2020-06-02 10:37:21 2021-03-08 10:37:08 driver-btm-api.c:2083:show_sn: len:16, 816c35c42b10481c 2021-03-08 10:37:08 driver-btm-api.c:2461:bitmain_soc_init: show sn return 1 2021-03-08 10:37:08 driver-btm-api.c:2103:handle_sn_for_factory_mode: show sn return 1 2021-03-08 10:37:08 driver-btm-api.c:2141:handle_sn_for_factory_mode: read sn success, 816c35c42b10481c 2021-03-08 10:37:08 fan.c:284:front_fan_power_on: Note: front fan is power on! 2021-03-08 10:37:08 fan.c:296:rear_fan_power_on: Note: rear fan is power on! 2021-03-08 10:37:08 driver-btm-api.c:1314:miner_device_init: Detect 256MB control board of XILINX 2021-03-08 10:37:08 driver-btm-api.c:1255:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2021-03-08 10:37:14 driver-btm-api.c:1239:init_miner_version: miner ID : 816c35c42b10481c 2021-03-08 10:37:14 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023 2021-03-08 10:37:19 driver-btm-api.c:837:get_product_id: product_id[0] = 0 2021-03-08 10:37:19 driver-btm-api.c:837:get_product_id: product_id[1] = 0 2021-03-08 10:37:19 driver-btm-api.c:837:get_product_id: product_id[2] = 0 2021-03-08 10:37:19 driver-btm-api.c:2234:update_conf_by_power_feedback: Power feedback is disabled 2021-03-08 10:37:19 driver-btm-api.c:2202:get_calibration_voltage: calibration voltage flag is error data. 2021-03-08 10:37:19 driver-btm-api.c:2268:update_conf_by_power_feedback: Note: no calibration voltage, default diff = 0 2021-03-08 10:37:19 frequency.c:1457:adjust_higer_max_vol_table: adjust_higer_max_vol_table, adjust_vol = 0 2021-03-08 10:37:19 thread.c:1363:create_read_nonce_reg_thread: create thread 2021-03-08 10:37:25 driver-btm-api.c:1239:init_miner_version: miner ID : 816c35c42b10481c 2021-03-08 10:37:25 driver-btm-api.c:1245:init_miner_version: FPGA Version = 0xB023 2021-03-08 10:37:31 driver-btm-api.c:837:get_product_id: product_id[0] = 0 2021-03-08 10:37:31 driver-btm-api.c:837:get_product_id: product_id[1] = 0 2021-03-08 10:37:31 driver-btm-api.c:837:get_product_id: product_id[2] = 0 2021-03-08 10:37:31 driver-btm-api.c:792:_set_project_type: project:0 2021-03-08 10:37:31 driver-btm-api.c:813:_set_project_type: Project type: Antminer S17+ 2021-03-08 10:37:31 driver-btm-api.c:824:dump_pcb_bom_version: Chain [0] PCB Version: 0x0100 2021-03-08 10:37:31 driver-btm-api.c:825:dump_pcb_bom_version: Chain [0] BOM Version: 0x0100 2021-03-08 10:37:31 driver-btm-api.c:824:dump_pcb_bom_version: Chain [1] PCB Version: 0x0100 2021-03-08 10:37:31 driver-btm-api.c:825:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2021-03-08 10:37:31 driver-btm-api.c:824:dump_pcb_bom_version: Chain [2] PCB Version: 0x0100 2021-03-08 10:37:31 driver-btm-api.c:825:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2021-03-08 10:37:33 driver-btm-api.c:2372:bitmain_board_init: Fan check passed. 2021-03-08 10:37:34 board.c:36:jump_and_app_check_restore_pic: chain[0] PIC jump to app 2021-03-08 10:37:36 board.c:40:jump_and_app_check_restore_pic: Check chain[0] PIC fw version=0x88 2021-03-08 10:37:37 board.c:36:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2021-03-08 10:37:39 board.c:40:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0x88 2021-03-08 10:37:40 board.c:36:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2021-03-08 10:37:42 board.c:40:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0x88 2021-03-08 10:37:42 thread.c:1358:create_pic_heart_beat_thread: create thread 2021-03-08 10:37:42 power_api.c:213:power_init: Power init: 2021-03-08 10:37:42 power_api.c:214:power_init: current_voltage_raw = 0 2021-03-08 10:37:42 power_api.c:215:power_init: highest_voltage_raw = 2100 2021-03-08 10:37:42 power_api.c:216:power_init: working_voltage_raw = 1950 2021-03-08 10:37:42 power_api.c:217:power_init: higher_voltage_raw = 2040 2021-03-08 10:37:42 power_api.c:218:power_init: check_asic_voltage_raw = 2100 2021-03-08 10:37:42 driver-btm-api.c:2382:bitmain_board_init: Enter 30s sleep to make sure power release finish. 2021-03-08 10:37:42 power_api.c:186:power_off: init gpio907 2021-03-08 10:38:14 power_api.c:324:set_to_highest_voltage_by_steps: Set to voltage raw 2100, step by step. 2021-03-08 10:38:40 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-08 10:38:41 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.931385 2021-03-08 10:38:42 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.054707 2021-03-08 10:38:43 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 21.006361 2021-03-08 10:38:43 power_api.c:53:_get_avg_voltage: average_voltage = 20.997484 2021-03-08 10:38:43 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 21.00, check voltage passed. 2021-03-08 10:38:43 uart.c:72:set_baud: set fpga_baud to 115200 2021-03-08 10:38:54 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[0]: find 65 asic, times 0 2021-03-08 10:39:06 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[1]: find 65 asic, times 0 2021-03-08 10:39:16 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 0 2021-03-08 10:39:27 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 1 2021-03-08 10:39:38 driver-btm-api.c:1134:check_asic_number_with_power_on: Chain[2]: find 9 asic, times 2 2021-03-08 10:39:38 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2021-03-08 10:39:46 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 3 2021-03-08 10:39:46 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2050 2021-03-08 10:39:46 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2050, step by step. 2021-03-08 10:39:50 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-08 10:39:51 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.400255 2021-03-08 10:39:52 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.496824 2021-03-08 10:39:53 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.472681 2021-03-08 10:39:53 power_api.c:53:_get_avg_voltage: average_voltage = 20.456587 2021-03-08 10:39:53 power_api.c:71:check_voltage: target_vol = 20.50, actural_vol = 20.46, check voltage passed. chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2021-03-08 10:40:02 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 4 2021-03-08 10:40:02 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2000 2021-03-08 10:40:02 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2000, step by step. 2021-03-08 10:40:05 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-08 10:40:07 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.892131 2021-03-08 10:40:08 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.013978 2021-03-08 10:40:09 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 19.989835 2021-03-08 10:40:09 power_api.c:53:_get_avg_voltage: average_voltage = 19.965315 2021-03-08 10:40:09 power_api.c:71:check_voltage: target_vol = 20.00, actural_vol = 19.97, check voltage passed. chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x f1fffff 2021-03-08 10:40:18 driver-btm-api.c:1157:check_asic_number_with_power_on: Chain[2]: find 0 asic, times 5 2021-03-08 10:40:18 power_api.c:380:modify_check_asic_voltage: check_asic_voltage_raw = 2100 2021-03-08 10:40:18 power_api.c:364:set_to_check_asic_voltage_by_steps: Set to voltage raw 2100, step by step. 2021-03-08 10:40:23 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-08 10:40:24 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.880710 2021-03-08 10:40:25 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 21.030534 2021-03-08 10:40:26 power_api.c:40:_get_avg_voltage: chain = 2, voltage = 20.955528 2021-03-08 10:40:26 power_api.c:53:_get_avg_voltage: average_voltage = 20.955590 2021-03-08 10:40:26 power_api.c:71:check_voltage: target_vol = 21.00, actural_vol = 20.96, check voltage passed. 2021-03-08 10:40:26 driver-btm-api.c:1193:check_asic_number: Chain 2 only find 0 asic, will power off hash board 2 2021-03-08 10:40:28 driver-btm-api.c:1195:check_asic_number: Chain 2 voltage: an0 = 2.806452, an2 2.800000, an6 2.538710. 2021-03-08 10:40:34 driver-hash-chip.c:266:set_uart_relay: set uart relay to 0x330003 2021-03-08 10:40:34 driver-btm-api.c:435:set_order_clock: chain[0]: set order clock, stragegy 3 2021-03-08 10:40:34 driver-btm-api.c:435:set_order_clock: chain[1]: set order clock, stragegy 3 2021-03-08 10:40:35 driver-hash-chip.c:502:set_clock_delay_control: core_data = 0x34 2021-03-08 10:40:35 driver-btm-api.c:1892:check_clock_counter: freq 50 clock_counter_limit 6 2021-03-08 10:40:35 voltage[0] = 1940 2021-03-08 10:40:35 voltage[1] = 1940 2021-03-08 10:40:35 power_api.c:226:set_working_voltage_raw: working_voltage_raw = 1940 2021-03-08 10:40:36 temperature.c:340:calibrate_temp_sensor_one_chain: chain 0 temp sensor NCT218 2021-03-08 10:40:37 temperature.c:340:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218 2021-03-08 10:40:37 uart.c:72:set_baud: set fpga_baud to 12000000 2021-03-08 10:40:38 driver-btm-api.c:293:check_bringup_temp: Bring up temperature is 24 2021-03-08 10:40:38 thread.c:1378:create_check_miner_status_thread: create thread 2021-03-08 10:40:38 thread.c:1368:create_show_miner_status_thread: create thread 2021-03-08 10:40:38 thread.c:1348:create_temperature_monitor_thread: create thread 2021-03-08 10:40:38 frequency.c:514:check_bringup_temp_dec_freq: dec freq = 0 when bringup temp = 24 dec_freq_index=0 2021-03-08 10:40:38 freq_tuning.c:183:freq_tuning_get_max_freq: Max freq of tuning is 650 2021-03-08 10:40:38 driver-btm-api.c:1765:send_null_work: [DEBUG] Send null work. 2021-03-08 10:40:38 thread.c:1338:create_asic_status_monitor_thread: create thread 2021-03-08 10:40:38 frequency.c:1110:inc_freq_with_fixed_vco: chain = 255, freq = 490, is_higher_voltage = true 2021-03-08 10:41:37 power_api.c:352:set_to_voltage_by_steps: Set to voltage raw 2090, step by step. 2021-03-08 10:41:39 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-08 10:41:40 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 20.760151 2021-03-08 10:41:41 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 20.858958 2021-03-08 10:41:41 power_api.c:53:_get_avg_voltage: average_voltage = 20.809555 2021-03-08 10:41:41 power_api.c:71:check_voltage: target_vol = 20.90, actural_vol = 20.81, check voltage passed. 2021-03-08 10:45:18 frequency.c:1152:inc_freq_with_fixed_step: chain = 1, freq_start = 490, freq_end = 510, freq_step = 5, is_higher_voltage = true 2021-03-08 10:45:26 frequency.c:1181:inc_asic_diff_freq_by_steps: chain = 0, start = 490, freq_step = 5 2021-03-08 10:45:33 frequency.c:1181:inc_asic_diff_freq_by_steps: chain = 1, start = 510, freq_step = 5 2021-03-08 10:45:36 driver-btm-api.c:765:set_timeout: freq = 540, percent = 90, hcn = 44236, timeout = 81 2021-03-08 10:45:36 power_api.c:310:set_to_working_voltage_by_steps: Set to voltage raw 1940, step by step. 2021-03-08 10:45:43 power_api.c:85:check_voltage_multi: retry time: 0 2021-03-08 10:45:44 power_api.c:40:_get_avg_voltage: chain = 0, voltage = 19.265566 2021-03-08 10:45:45 power_api.c:40:_get_avg_voltage: chain = 1, voltage = 19.386768 2021-03-08 10:45:45 power_api.c:53:_get_avg_voltage: average_voltage = 19.326167 2021-03-08 10:45:45 power_api.c:71:check_voltage: target_vol = 19.40, actural_vol = 19.33, check voltage passed. 2021-03-08 10:45:45 thread.c:1373:create_check_system_status_thread: create thread 2021-03-08 10:45:45 driver-btm-api.c:2618:bitmain_soc_init: Init done! 2021-03-08 10:45:45 driver-btm-api.c:222:set_miner_status: STATUS_INIT 2021-03-08 10:45:51 driver-btm-api.c:222:set_miner_status: STATUS_OKAY 2021-03-08 10:45:52 frequency.c:205:get_ideal_hash_rate_GH: ideal_hash_rate = 44717 2021-03-08 10:45:52 frequency.c:223:get_sale_hash_rate_GH: sale_hash_rate = 43000 2021-03-08 10:45:55 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-08 10:45:55 driver-btm-api.c:1644:dhash_chip_send_job: stime.tv_sec 1615200355, block_ntime 1615200348 2021-03-08 11:15:56 thread.c:259:calc_hashrate_avg: avg rate is 45667.89 in 30 mins 2021-03-08 11:15:56 temperature.c:516:temp_statistics_show: pcb temp 44~65 chip temp 60~79 2021-03-08 11:23:02 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-08 11:23:15 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-08 11:45:57 thread.c:259:calc_hashrate_avg: avg rate is 45219.17 in 30 mins 2021-03-08 11:45:57 temperature.c:516:temp_statistics_show: pcb temp 44~65 chip temp 60~80 2021-03-08 12:15:59 thread.c:259:calc_hashrate_avg: avg rate is 45144.65 in 30 mins 2021-03-08 12:15:59 temperature.c:516:temp_statistics_show: pcb temp 45~66 chip temp 61~80 2021-03-08 12:46:00 thread.c:259:calc_hashrate_avg: avg rate is 45310.75 in 30 mins 2021-03-08 12:46:00 temperature.c:516:temp_statistics_show: pcb temp 45~67 chip temp 61~79 2021-03-08 13:09:39 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-08 13:09:55 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-08 13:16:02 thread.c:259:calc_hashrate_avg: avg rate is 44854.70 in 30 mins 2021-03-08 13:16:02 temperature.c:516:temp_statistics_show: pcb temp 45~66 chip temp 60~80 2021-03-08 13:46:03 thread.c:259:calc_hashrate_avg: avg rate is 45150.15 in 30 mins 2021-03-08 13:46:03 temperature.c:516:temp_statistics_show: pcb temp 45~66 chip temp 61~79 2021-03-08 14:16:04 thread.c:259:calc_hashrate_avg: avg rate is 45199.63 in 30 mins 2021-03-08 14:16:04 temperature.c:516:temp_statistics_show: pcb temp 45~67 chip temp 61~80 2021-03-08 14:46:06 thread.c:259:calc_hashrate_avg: avg rate is 45222.75 in 30 mins 2021-03-08 14:46:06 temperature.c:516:temp_statistics_show: pcb temp 46~66 chip temp 61~79 2021-03-08 15:16:07 thread.c:259:calc_hashrate_avg: avg rate is 45271.67 in 30 mins 2021-03-08 15:16:07 temperature.c:516:temp_statistics_show: pcb temp 45~66 chip temp 62~80 2021-03-08 15:46:09 thread.c:259:calc_hashrate_avg: avg rate is 45118.44 in 30 mins 2021-03-08 15:46:09 temperature.c:516:temp_statistics_show: pcb temp 45~66 chip temp 61~79 2021-03-08 16:16:10 thread.c:259:calc_hashrate_avg: avg rate is 45212.38 in 30 mins 2021-03-08 16:16:10 temperature.c:516:temp_statistics_show: pcb temp 46~66 chip temp 61~80 2021-03-08 16:46:12 thread.c:259:calc_hashrate_avg: avg rate is 45221.00 in 30 mins 2021-03-08 16:46:12 temperature.c:516:temp_statistics_show: pcb temp 45~66 chip temp 61~79 2021-03-08 17:09:23 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-08 17:09:38 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-08 17:16:13 thread.c:259:calc_hashrate_avg: avg rate is 44655.30 in 30 mins 2021-03-08 17:16:13 temperature.c:516:temp_statistics_show: pcb temp 46~66 chip temp 62~80 2021-03-08 17:46:14 thread.c:259:calc_hashrate_avg: avg rate is 45026.25 in 30 mins 2021-03-08 17:46:14 temperature.c:516:temp_statistics_show: pcb temp 45~66 chip temp 61~80 2021-03-08 18:16:16 thread.c:259:calc_hashrate_avg: avg rate is 45364.92 in 30 mins 2021-03-08 18:16:16 temperature.c:516:temp_statistics_show: pcb temp 46~66 chip temp 61~79 2021-03-08 18:46:17 thread.c:259:calc_hashrate_avg: avg rate is 45214.29 in 30 mins 2021-03-08 18:46:17 temperature.c:516:temp_statistics_show: pcb temp 45~66 chip temp 62~80 2021-03-08 19:16:19 thread.c:259:calc_hashrate_avg: avg rate is 45032.38 in 30 mins 2021-03-08 19:16:19 temperature.c:516:temp_statistics_show: pcb temp 45~66 chip temp 61~80 2021-03-08 19:46:20 thread.c:259:calc_hashrate_avg: avg rate is 44847.99 in 30 mins 2021-03-08 19:46:20 temperature.c:516:temp_statistics_show: pcb temp 45~67 chip temp 61~79 2021-03-08 20:16:22 thread.c:259:calc_hashrate_avg: avg rate is 45439.56 in 30 mins 2021-03-08 20:16:22 temperature.c:516:temp_statistics_show: pcb temp 37~67 chip temp 53~80 2021-03-08 20:46:23 thread.c:259:calc_hashrate_avg: avg rate is 45500.38 in 30 mins 2021-03-08 20:46:23 temperature.c:516:temp_statistics_show: pcb temp 37~67 chip temp 54~79 2021-03-08 21:09:39 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-08 21:10:10 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-08 21:16:25 thread.c:259:calc_hashrate_avg: avg rate is 44883.40 in 30 mins 2021-03-08 21:16:25 temperature.c:516:temp_statistics_show: pcb temp 37~66 chip temp 54~80 2021-03-08 21:46:26 thread.c:259:calc_hashrate_avg: avg rate is 44998.22 in 30 mins 2021-03-08 21:46:26 temperature.c:516:temp_statistics_show: pcb temp 37~67 chip temp 54~80 2021-03-08 22:16:27 thread.c:259:calc_hashrate_avg: avg rate is 45373.63 in 30 mins 2021-03-08 22:16:27 temperature.c:516:temp_statistics_show: pcb temp 37~66 chip temp 53~79 2021-03-08 22:46:29 thread.c:259:calc_hashrate_avg: avg rate is 45341.74 in 30 mins 2021-03-08 22:46:29 temperature.c:516:temp_statistics_show: pcb temp 37~66 chip temp 54~80 2021-03-08 23:16:30 thread.c:259:calc_hashrate_avg: avg rate is 45133.09 in 30 mins 2021-03-08 23:16:30 temperature.c:516:temp_statistics_show: pcb temp 37~66 chip temp 53~79 2021-03-08 23:46:32 thread.c:259:calc_hashrate_avg: avg rate is 45348.60 in 30 mins 2021-03-08 23:46:32 temperature.c:516:temp_statistics_show: pcb temp 37~66 chip temp 54~79 2021-03-09 00:16:33 thread.c:259:calc_hashrate_avg: avg rate is 45134.89 in 30 mins 2021-03-09 00:16:33 temperature.c:516:temp_statistics_show: pcb temp 38~66 chip temp 54~79 2021-03-09 00:46:35 thread.c:259:calc_hashrate_avg: avg rate is 45023.20 in 30 mins 2021-03-09 00:46:35 temperature.c:516:temp_statistics_show: pcb temp 37~66 chip temp 53~80 2021-03-09 01:08:23 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-09 01:08:42 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-09 01:16:36 thread.c:259:calc_hashrate_avg: avg rate is 45231.91 in 30 mins 2021-03-09 01:16:36 temperature.c:516:temp_statistics_show: pcb temp 37~66 chip temp 53~79 2021-03-09 01:46:38 thread.c:259:calc_hashrate_avg: avg rate is 45246.03 in 30 mins 2021-03-09 01:46:38 temperature.c:516:temp_statistics_show: pcb temp 37~66 chip temp 53~79 2021-03-09 02:16:39 thread.c:259:calc_hashrate_avg: avg rate is 45297.19 in 30 mins 2021-03-09 02:16:39 temperature.c:516:temp_statistics_show: pcb temp 39~65 chip temp 56~80 2021-03-09 02:46:40 thread.c:259:calc_hashrate_avg: avg rate is 45119.66 in 30 mins 2021-03-09 02:46:40 temperature.c:516:temp_statistics_show: pcb temp 39~65 chip temp 55~80 2021-03-09 03:16:42 thread.c:259:calc_hashrate_avg: avg rate is 44950.55 in 30 mins 2021-03-09 03:16:42 temperature.c:516:temp_statistics_show: pcb temp 39~65 chip temp 55~79 2021-03-09 03:46:43 thread.c:259:calc_hashrate_avg: avg rate is 45169.06 in 30 mins 2021-03-09 03:46:43 temperature.c:516:temp_statistics_show: pcb temp 39~65 chip temp 55~80 2021-03-09 04:16:45 thread.c:259:calc_hashrate_avg: avg rate is 45521.37 in 30 mins 2021-03-09 04:16:45 temperature.c:516:temp_statistics_show: pcb temp 39~65 chip temp 54~80 2021-03-09 04:46:46 thread.c:259:calc_hashrate_avg: avg rate is 45270.96 in 30 mins 2021-03-09 04:46:46 temperature.c:516:temp_statistics_show: pcb temp 38~65 chip temp 54~80 2021-03-09 05:08:28 driver-btm-api.c:1496:dhash_chip_send_job: Version num 1. 2021-03-09 05:08:38 driver-btm-api.c:1496:dhash_chip_send_job: Version num 4. 2021-03-09 05:16:48 thread.c:259:calc_hashrate_avg: avg rate is 45176.44 in 30 mins 2021-03-09 05:16:48 temperature.c:516:temp_statistics_show: pcb temp 38~65 chip temp 54~80 2021-03-09 05:46:49 thread.c:259:calc_hashrate_avg: avg rate is 45482.07 in 30 mins 2021-03-09 05:46:49 temperature.c:516:temp_statistics_show: pcb temp 38~65 chip temp 55~80 2021-03-09 06:16:50 thread.c:259:calc_hashrate_avg: avg rate is 45120.88 in 30 mins 2021-03-09 06:16:50 temperature.c:516:temp_statistics_show: pcb temp 38~64 chip temp 55~80 2021-03-09 06:46:52 thread.c:259:calc_hashrate_avg: avg rate is 45479.85 in 30 mins 2021-03-09 06:46:52 temperature.c:516:temp_statistics_show: pcb temp 37~66 chip temp 53~79 2021-03-09 07:16:53 thread.c:259:calc_hashrate_avg: avg rate is 45421.67 in 30 mins 2021-03-09 07:16:53 temperature.c:516:temp_statistics_show: pcb temp 38~66 chip temp 54~79 2021-03-09 07:46:55 thread.c:259:calc_hashrate_avg: avg rate is 45202.08 in 30 mins 2021-03-09 07:46:55 temperature.c:516:temp_statistics_show: pcb temp 38~66 chip temp 53~80 2021-03-09 08:16:56 thread.c:259:calc_hashrate_avg: avg rate is 45083.03 in 30 mins 2021-03-09 08:16:56 temperature.c:516:temp_statistics_show: pcb temp 38~67 chip temp 54~80
|
|
|
|
wndsnb
|
|
March 09, 2021, 01:25:45 PM Last edit: March 09, 2021, 11:19:27 PM by frodocooper |
|
With aftermarket firmware 100% yes. With original firmware, maybe. It won't damage anything to try it though, it will either work or not.
If you try, please report back on your success/failure.
|
Have some dead Bitmain 17 series hashboards or full miners? I'll buy them ... send me a PM with what you have and I'll make you an offer!
|
|
|
|