Tony2o6 (OP)
Newbie
Offline
Activity: 4
Merit: 0
|
|
March 09, 2021, 11:47:59 PM Last edit: March 11, 2021, 11:26:46 PM by frodocooper |
|
I decided to switch mining pools from f2pool to slushpool and this is when all the problems started arising. When I switched pools, the first problem was one of my hashboards started not hashing again. I thought a simple reboot would fix it, but it didnt. I rebooted a few more times and the problem was still there. I disconnected the power for a few minutes then plugged it back in and it still wouldn’t work. After doing this a few times, now one of my hashboards doesn’t show up under miner status AND one of my hashboards is not hashing as well. So two hashboards don’t work and only one works. Two show up under miner status, only one works, and one isn’t showing up.
Update: So I was able to mess around with the cables and got two of the hash boards working, and one is still showing the message “chain 3 only find 134 asic, will power off hash board 3”. Does this mean that the last chip, 135 is bad or the heat shield is bad and needs resoldering? If so, could someone show me a map of which one is the 135th chip or heat shield that needs to be resoldered? I will be removing my hash board and bringing it to someone who knows how to solder to have it fixed so I would need a good picture to show him which one needs to be checked. Here is the kernel code, for some reason I can’t fit the whole code in. Thank you! Booting Linux on physical CPU 0x0 Linux version 4.6.0-xilinx-gff8137b-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #25 SMP PREEMPT Fri Nov 23 15:30:52 CST 2018 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine model: Xilinx Zynq cma: Reserved 16 MiB at 0x0e000000 Memory policy: Data cache writealloc On node 0 totalpages: 61440 free_area_init_node: node 0, pgdat c0b39280, node_mem_map cde10000 Normal zone: 480 pages used for memmap Normal zone: 0 pages reserved Normal zone: 61440 pages, LIFO batch:15 percpu: Embedded 12 pages/cpu @cddf1000 s19776 r8192 d21184 u49152 pcpu-alloc: s19776 r8192 d21184 u49152 alloc=12*4096 pcpu-alloc: [0] 0 [0] 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60960 Kernel command line: mem=240M console=ttyPS0,115200 ramdisk_size=33554432 root=/dev/ram rw earlyprintk PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 195688K/245760K available (6345K kernel code, 231K rwdata, 1896K rodata, 1024K init, 223K bss, 33688K reserved, 16384K cma-reserved, 0K highmem) Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xcf800000 - 0xff800000 ( 768 MB) lowmem : 0xc0000000 - 0xcf000000 ( 240 MB) pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) modules : 0xbf000000 - 0xbfe00000 ( 14 MB) .text : 0xc0008000 - 0xc090c424 (9234 kB) .init : 0xc0a00000 - 0xc0b00000 (1024 kB) .data : 0xc0b00000 - 0xc0b39fe0 ( 232 kB) .bss : 0xc0b39fe0 - 0xc0b71c28 ( 224 kB) Preemptible hierarchical RCU implementation. Build-time adjustment of leaf fanout to 32. RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2 NR_IRQS:16 nr_irqs:16 16 efuse mapped to cf800000 ps7-slcr mapped to cf802000 L2C: platform modifies aux control register: 0x72360000 -> 0x72760000 L2C: DT/platform modifies aux control register: 0x72360000 -> 0x72760000 L2C-310 erratum 769419 enabled L2C-310 enabling early BRESP for Cortex-A9 L2C-310 full line of zeros enabled for Cortex-A9 L2C-310 ID prefetch enabled, offset 1 lines L2C-310 dynamic clock gating enabled, standby mode enabled L2C-310 cache controller enabled, 8 ways, 512 kB L2C-310: CACHE_ID 0x410000c8, AUX_CTRL 0x76760001 zynq_clock_init: clkc starts at cf802100 Zynq clock init sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 4398046511103ns clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x4ce07af025, max_idle_ns: 440795209040 ns Switching to timer-based delay loop, resolution 3ns clocksource: ttc_clocksource: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 537538477 ns ps7-ttc #0 at cf80a000, irq=18 Console: colour dummy device 80x30 Calibrating delay loop (skipped), value calculated using timer frequency.. 666.66 BogoMIPS (lpj=3333333) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 Setting up static identity map for 0x100000 - 0x100058 CPU1: failed to boot: -1 Brought up 1 CPUs SMP: Total of 1 processors activated (666.66 BogoMIPS). CPU: All CPU(s) started in SVC mode. devtmpfs: initialized VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns pinctrl core: initialized pinctrl subsystem NET: Registered protocol family 16 DMA: preallocated 256 KiB pool for atomic coherent allocations cpuidle: using governor menu hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. hw-breakpoint: maximum watchpoint size is 4 bytes. zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xcf880000 vgaarb: loaded SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb media: Linux media interface: v0.10 Linux video capture interface: v2.00 pps_core: LinuxPPS API ver. 1 registered pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> PTP clock support registered EDAC MC: Ver: 3.0.0 Advanced Linux Sound Architecture Driver Initialized. clocksource: Switched to clocksource arm_global_timer NET: Registered protocol family 2 TCP established hash table entries: 2048 (order: 1, 8192 bytes) TCP bind hash table entries: 2048 (order: 2, 16384 bytes) TCP: Hash tables configured (established 2048 bind 2048) UDP hash table entries: 256 (order: 1, 8192 bytes) UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) NET: Registered protocol family 1 RPC: Registered named UNIX socket transport module. RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. PCI: CLS 0 bytes, default 64 Trying to unpack rootfs image as initramfs... rootfs image is not initramfs (no cpio magic); looks like an initrd Freeing initrd memory: 20648K (cc6d7000 - cdb01000) hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available futex hash table entries: 512 (order: 3, 32768 bytes) workingset: timestamp_bits=28 max_order=16 bucket_order=0 jffs2: version 2.2. (NAND) (SUMMARY) � 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-241330 dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16 e0000000.serial: ttyPS0 at MMIO 0xe0000000 (irq = 158, base_baud = 6249999) is a xuartps console [ttyPS0] enabled xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to cf86e000 [drm] Initialized drm 1.1.0 20060810 brd: module loaded loop: module loaded CAN device driver interface gpiod_set_value: invalid GPIO libphy: MACB_mii_bus: probed macb e000b000.ethernet eth0: Cadence GEM rev 0x00020118 at 0xe000b000 irq 31 (00:0a:35:00:00:00) Generic PHY e000b000.etherne:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=e000b000.etherne:00, irq=-1) e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k e1000e: Copyright(c) 1999 - 2015 Intel Corporation. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci-pci: EHCI PCI platform driver usbcore: registered new interface driver usb-storage mousedev: PS/2 mouse device common for all mice i2c /dev entries driver Xilinx Zynq CpuIdle Driver started sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pltfm: SDHCI platform and OF driver helper mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda nand: Micron MT29F2G08ABAGAWP nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128 nand: WARNING: pl35x-nand: the ECC used on your system is too weak compared to the one required by the NAND chip Bad block table found at page 131008, version 0x01 Bad block table found at page 130944, version 0x01 6 ofpart partitions found on MTD device pl35x-nand Creating 6 MTD partitions on "pl35x-nand": 0x000000000000-0x000002800000 : "BOOT.bin-env-dts-kernel" 0x000002800000-0x000004800000 : "ramfs" 0x000004800000-0x000005000000 : "configs" 0x000005000000-0x000006000000 : "reserve" 0x000006000000-0x000008000000 : "ramfs-bak" 0x000008000000-0x000010000000 : "reserve1" NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 zynq_pm_ioremap: no compatible node found for 'xlnx,zynq-ddrc-a05' zynq_pm_late_init: Unable to map DDRC IO memory. Registering SWP/SWPB emulation handler hctosys: unable to open rtc device (rtc0) ALSA device list: No soundcards found. RAMDISK: gzip image found at block 0 EXT4-fs (ram0): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (ram0): mounted filesystem without journal. Opts: (null) VFS: Mounted root (ext4 filesystem) on device 1:0. devtmpfs: mounted Freeing unused kernel memory: 1024K (c0a00000 - c0b00000) EXT4-fs (ram0): re-mounted. Opts: block_validity,delalloc,barrier,user_xattr random: dd urandom read with 0 bits of entropy available ubi0: attaching mtd2 ubi0: scanning is finished ubi0: attached mtd2 (name "configs", size 8 MiB) ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi0: good PEBs: 64, bad PEBs: 0, corrupted PEBs: 0 ubi0: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi0: max/mean erase counter: 28/11, WL threshold: 4096, image sequence number: 2636279313 ubi0: available PEBs: 0, total reserved PEBs: 64, PEBs reserved for bad PEB handling: 40 ubi0: background thread "ubi_bgt0d" started, PID 708 UBIFS (ubi0:0): background thread "ubifs_bgt0_0" started, PID 711 UBIFS (ubi0:0): UBIFS: mounted UBI device 0, volume 0, name "configs" UBIFS (ubi0:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi0:0): FS size: 1396736 bytes (1 MiB, 11 LEBs), journal size 888833 bytes (0 MiB, 5 LEBs) UBIFS (ubi0:0): reserved for root: 65970 bytes (64 KiB) UBIFS (ubi0:0): media format: w4/r0 (latest is w4/r0), UUID A5E2E817-94FA-4998-90AB-D2C873A8EBA9, small LPT model ubi1: attaching mtd5 ubi1: scanning is finished ubi1: attached mtd5 (name "reserve1", size 128 MiB) ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096 ubi1: good PEBs: 1020, bad PEBs: 4, corrupted PEBs: 0 ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128 ubi1: max/mean erase counter: 8314/6097, WL threshold: 4096, image sequence number: 614900815 ubi1: available PEBs: 0, total reserved PEBs: 1020, PEBs reserved for bad PEB handling: 36 ubi1: background thread "ubi_bgt1d" started, PID 720 UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 723 UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "reserve1" UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes UBIFS (ubi1:0): FS size: 123039744 bytes (117 MiB, 969 LEBs), journal size 6221824 bytes (5 MiB, 49 LEBs) UBIFS (ubi1:0): reserved for root: 4952683 bytes (4836 KiB) UBIFS (ubi1:0): media format: w4/r0 (latest is w4/r0), UUID 91DF6B3D-1A99-4241-87C7-EB25097110C1, small LPT model IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready macb e000b000.ethernet eth0: unable to generate target frequency: 25000000 Hz macb e000b000.ethernet eth0: link up (100/Full) IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready In axi fpga driver! request_mem_region OK! AXI fpga dev virtual address is 0xcfb54000 *base_vir_addr = 0xb023 In fpga mem driver! request_mem_region OK! fpga mem virtual address is 0xd2000000 2021-03-10 04:34:06:thread.c:1555:create_bitmain_soc_init_thread: create thread 2021-03-10 04:34:06:driver-btm-api.c:682:init_freq_mode: This is scan-user version 2021-03-10 04:34:06:driver-btm-api.c:2518:bitmain_soc_init: Miner compile time: Fri Jan 8 22:31:06 CST 2021 type: Antminer S17e 2021-03-10 04:34:06:driver-btm-api.c:2519:bitmain_soc_init: commit version: 37668c9 2021-01-08 18:20:11, build by: jenkins 2021-01-08 22:35:52 2021-03-10 04:34:06:driver-btm-api.c:2520:bitmain_soc_init: opt_multi_version = 1 2021-03-10 04:34:06:driver-btm-api.c:2521:bitmain_soc_init: opt_bitmain_ab = 1 2021-03-10 04:34:06:driver-btm-api.c:2522:bitmain_soc_init: mid_auto_gen = 0 2021-03-10 04:34:06:driver-btm-api.c:2523:bitmain_soc_init: work_mode = 0 2021-03-10 04:34:06:driver-btm-api.c:2524:bitmain_soc_init: power_feedback_en = true 2021-03-10 04:34:06:driver-btm-api.c:2067:show_sn: no SN got, please write SN to /config/sn 2021-03-10 04:34:06:driver-btm-api.c:1384:miner_device_init: Detect 256MB control board of XILINX 2021-03-10 04:34:06:driver-btm-api.c:1325:init_fan_parameter: fan_eft : 0 fan_pwm : 0 2021-03-10 04:34:12:driver-btm-api.c:1309:init_miner_version: miner ID : 8004cc481540885c 2021-03-10 04:34:12:driver-btm-api.c:1315:init_miner_version: FPGA Version = 0xB023 2021-03-10 04:34:17:auto_adapt.c:100:_get_board_info: chain[1] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB 2021-03-10 04:34:17:auto_adapt.c:100:_get_board_info: chain[2] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB 2021-03-10 04:34:17:auto_adapt.c:100:_get_board_info: chain[3] board bin: 1, chip bin: 1, chip ft: A4V4, chip version: AB 2021-03-10 04:34:17:driver-btm-api.c:2164:get_calibration_voltage: calibration voltage flag is error data. 2021-03-10 04:34:17 voltage[1] = 1850 2021-03-10 04:34:17 voltage[2] = 1850 2021-03-10 04:34:17 voltage[3] = 1850 2021-03-10 04:34:17:auto_adapt.c:273:is_sweep_failed_before: open sweep tag failed voltage_ref = 1850 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2100 2090 2050 2100 2090 2080 2060 2030 1960 2080 2060 2030 2010 1960 1910
2021-03-10 04:34:17:thread.c:1523:create_read_nonce_reg_thread: create thread 2021-03-10 04:34:17:driver-btm-api.c:698:dump_pcb_bom_version: Chain [1] PCB Version: 0x0128 2021-03-10 04:34:17:driver-btm-api.c:699:dump_pcb_bom_version: Chain [1] BOM Version: 0x0100 2021-03-10 04:34:17:driver-btm-api.c:698:dump_pcb_bom_version: Chain [2] PCB Version: 0x0128 2021-03-10 04:34:17:driver-btm-api.c:699:dump_pcb_bom_version: Chain [2] BOM Version: 0x0100 2021-03-10 04:34:17:driver-btm-api.c:698:dump_pcb_bom_version: Chain [3] PCB Version: 0x0128 2021-03-10 04:34:17:driver-btm-api.c:699:dump_pcb_bom_version: Chain [3] BOM Version: 0x0100 2021-03-10 04:34:24:driver-btm-api.c:2344:bitmain_board_init: Fan check passed. 2021-03-10 04:34:25:board.c:81:jump_and_app_check_restore_pic: chain[1] PIC jump to app 2021-03-10 04:34:27:board.c:94:jump_and_app_check_restore_pic: Check chain[1] PIC fw version=0xb9 2021-03-10 04:34:28:board.c:81:jump_and_app_check_restore_pic: chain[2] PIC jump to app 2021-03-10 04:34:30:board.c:94:jump_and_app_check_restore_pic: Check chain[2] PIC fw version=0xb9 2021-03-10 04:34:31:board.c:81:jump_and_app_check_restore_pic: chain[3] PIC jump to app 2021-03-10 04:34:33:board.c:94:jump_and_app_check_restore_pic: Check chain[3] PIC fw version=0xb9 2021-03-10 04:34:33:thread.c:1518:create_pic_heart_beat_thread: create thread 2021-03-10 04:34:35:power_api.c:241:power_init: power type version: 0x0042 2021-03-10 04:34:36:power_api.c:259:power_init: Power init: 2021-03-10 04:34:36:power_api.c:260:power_init: current_voltage_raw = 2002 2021-03-10 04:34:36:power_api.c:261:power_init: highest_voltage_raw = 2000 2021-03-10 04:34:36:power_api.c:262:power_init: working_voltage_raw = 1800 2021-03-10 04:34:36:power_api.c:263:power_init: higher_voltage_raw = 1850 2021-03-10 04:34:36:power_api.c:264:power_init: check_asic_voltage_raw = 1800 2021-03-10 04:34:36:driver-btm-api.c:2354:bitmain_board_init: Enter 60s sleep to make sure power release finish. 2021-03-10 04:35:38:driver-btm-api.c:1123:check_asic_number_until_volt_balance: THIS is No.1 time boost asic: 2021-03-10 04:35:38:power_api.c:334:modify_check_asic_voltage: check_asic_voltage_raw = 1800 2021-03-10 04:35:41:power_api.c:298:set_to_check_asic_voltage_by_steps: Set to voltage raw 1800, step by step. 2021-03-10 04:36:04:uart.c:69:set_baud: set UART baud to 115200 chain 1, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2021-03-10 04:36:09:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[1]: find 135 asic, times 0 chain 2, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2021-03-10 04:36:13:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[2]: find 135 asic, times 0 chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2021-03-10 04:36:17:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[3]: find 134 asic, times 0 2021-03-10 04:36:19:board.c:81:jump_and_app_check_restore_pic: chain[3] PIC jump to app 2021-03-10 04:36:21:board.c:94:jump_and_app_check_restore_pic: Check chain[3] PIC fw version=0xb9 chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2021-03-10 04:36:25:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[3]: find 134 asic, times 1 2021-03-10 04:36:26:board.c:81:jump_and_app_check_restore_pic: chain[3] PIC jump to app 2021-03-10 04:36:28:board.c:94:jump_and_app_check_restore_pic: Check chain[3] PIC fw version=0xb9 chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2021-03-10 04:36:32:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[3]: find 134 asic, times 2 2021-03-10 04:36:33:board.c:81:jump_and_app_check_restore_pic: chain[3] PIC jump to app 2021-03-10 04:36:35:board.c:94:jump_and_app_check_restore_pic: Check chain[3] PIC fw version=0xb9 chain 3, IO_DRIVE_STRENGTH_CONFIGURATION reg = 0x 7777777 2021-03-10 04:36:39:driver-btm-api.c:1035:check_asic_number_with_power_on: Chain[3]: find 134 asic, times 3 2021-03-10 04:36:41:board.c:81:jump_and_app_check_restore_pic: chain[3] PIC jump to app 2021-03-10 04:36:43:board.c:94:jump_and_app_check_restore_pic: Check chain[3] PIC fw version=0xb9 2021-03-10 04:36:43:driver-btm-api.c:1217:check_asic_number: Chain 3 only find 134 asic, will power off hash board 3 2021-03-10 04:36:44:driver-btm-api.c:1163:check_asic_number_until_volt_balance: PASS: volt balance at No.1 time boost asic. 2021-03-10 04:36:44:power_api.c:364:set_to_highest_voltage_by_steps: Set to voltage raw 2000, step by step. 2021-03-10 04:37:19:driver-hash-chip.c:876:set_uart_relay: set uart relay to 0x390003 2021-03-10 04:37:19:driver-hash-chip.c:1264:set_ldo_ctrl: Set LDO to 0x2000203 2021-03-10 04:37:20:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.334, d1 0.331, d2 0.330, d3 0.334, sum = 1.329590 chain 1 domain 1: d0 0.338, d1 0.336, d2 0.335, d3 0.334, sum = 1.342977 chain 1 domain 2: d0 0.321, d1 0.324, d2 0.325, d3 0.330, sum = 1.299601 chain 1 domain 3: d0 0.339, d1 0.333, d2 0.333, d3 0.338, sum = 1.343302 chain 1 domain 4: d0 0.333, d1 0.333, d2 0.331, d3 0.333, sum = 1.330241 chain 1 domain 5: d0 0.341, d1 0.337, d2 0.337, d3 0.335, sum = 1.349162 chain 1 domain 6: d0 0.331, d1 0.328, d2 0.327, d3 0.330, sum = 1.314941 chain 1 domain 7: d0 0.337, d1 0.335, d2 0.334, d3 0.336, sum = 1.341675 chain 1 domain 8: d0 0.321, d1 0.318, d2 0.320, d3 0.319, sum = 1.277506 chain 1 domain 9: d0 0.326, d1 0.323, d2 0.326, d3 0.323, sum = 1.299072 chain 1 domain 10: d0 0.324, d1 0.326, d2 0.330, d3 0.331, sum = 1.311157 chain 1 domain 11: d0 0.324, d1 0.319, d2 0.317, d3 0.318, sum = 1.278076 chain 1 domain 12: d0 0.329, d1 0.330, d2 0.329, d3 0.326, sum = 1.313517 chain 1 domain 13: d0 0.330, d1 0.330, d2 0.330, d3 0.335, sum = 1.324178 chain 1 domain 14: d0 0.324, d1 0.321, d2 0.321, d3 0.325, sum = 1.290487 2021-03-10 04:37:20:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.349, d1 0.335, d2 0.346, d3 0.335, sum = 1.366048 chain 2 domain 1: d0 0.351, d1 0.346, d2 0.346, d3 0.344, sum = 1.386719 chain 2 domain 2: d0 0.332, d1 0.333, d2 0.332, d3 0.336, sum = 1.332479 chain 2 domain 3: d0 0.324, d1 0.319, d2 0.317, d3 0.315, sum = 1.275024 chain 2 domain 4: d0 0.327, d1 0.327, d2 0.325, d3 0.327, sum = 1.305379 chain 2 domain 5: d0 0.328, d1 0.323, d2 0.323, d3 0.321, sum = 1.295085 chain 2 domain 6: d0 0.329, d1 0.328, d2 0.329, d3 0.331, sum = 1.316813 chain 2 domain 7: d0 0.328, d1 0.326, d2 0.326, d3 0.326, sum = 1.306315 chain 2 domain 8: d0 0.318, d1 0.316, d2 0.317, d3 0.315, sum = 1.266724 chain 2 domain 9: d0 0.331, d1 0.333, d2 0.334, d3 0.331, sum = 1.328857 chain 2 domain 10: d0 0.323, d1 0.325, d2 0.326, d3 0.323, sum = 1.296427 chain 2 domain 11: d0 0.328, d1 0.328, d2 0.327, d3 0.328, sum = 1.310872 chain 2 domain 12: d0 0.335, d1 0.336, d2 0.335, d3 0.335, sum = 1.341471 chain 2 domain 13: d0 0.328, d1 0.322, d2 0.324, d3 0.329, sum = 1.302328 chain 2 domain 14: d0 0.327, d1 0.323, d2 0.325, d3 0.329, sum = 1.304118 2021-03-10 04:37:20:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-03-10 04:37:22:temperature.c:272:calibrate_temp_sensor_one_chain: chain 1 temp sensor NCT218 2021-03-10 04:37:23:temperature.c:272:calibrate_temp_sensor_one_chain: chain 2 temp sensor NCT218 2021-03-10 04:37:29:driver-btm-api.c:311:check_bringup_temp: Bring up temperature is 31 2021-03-10 04:37:29:uart.c:69:set_baud: set UART baud to 6000000 2021-03-10 04:37:29 voltage[1] = 1850 2021-03-10 04:37:29 voltage[2] = 1850 2021-03-10 04:37:29:power_api.c:272:set_working_voltage_raw: working_voltage_raw = 1850 2021-03-10 04:37:29:thread.c:1538:create_check_miner_status_thread: create thread 2021-03-10 04:37:29:thread.c:1528:create_show_miner_status_thread: create thread 2021-03-10 04:37:29:thread.c:1503:create_temperature_monitor_thread: create thread 2021-03-10 04:37:29:thread.c:1580:create_fan_monitor_thread: create thread 2021-03-10 04:37:29:frequency.c:578:inc_freq_with_fixed_vco: chain = 255, freq = 380, is_higher_voltage = true 2021-03-10 04:37:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 33, chip_temp 36 ~ 40, now 6.0s, target 40.0 2021-03-10 04:37:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 34, chip_temp 36 ~ 40, now 7.0s, target 40.2 2021-03-10 04:37:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 34, chip_temp 36 ~ 40, now 8.0s, target 40.3 2021-03-10 04:37:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 33, chip_temp 36 ~ 40, now 9.0s, target 40.5 2021-03-10 04:37:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 34, chip_temp 36 ~ 41, now 10.0s, target 40.7 2021-03-10 04:37:39:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 41 > 40.7 target_temp. 2021-03-10 04:37:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 32 ~ 35, chip_temp 37 ~ 42, now 16.0s, target 41.7 2021-03-10 04:37:45:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 42 > 41.7 target_temp. 2021-03-10 04:37:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 33 ~ 36, chip_temp 37 ~ 44, now 22.0s, target 42.7 2021-03-10 04:37:51:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 44 > 42.7 target_temp. 2021-03-10 04:37:57:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 36, chip_temp 38 ~ 45, now 28.0s, target 43.7 2021-03-10 04:37:57:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 45 > 43.7 target_temp. 2021-03-10 04:38:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 34 ~ 37, chip_temp 39 ~ 45, now 34.0s, target 44.7 2021-03-10 04:38:03:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 45 > 44.7 target_temp. 2021-03-10 04:38:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 35 ~ 38, chip_temp 39 ~ 47, now 40.0s, target 45.7 2021-03-10 04:38:09:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 47 > 45.7 target_temp. 2021-03-10 04:38:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 35 ~ 38, chip_temp 40 ~ 47, now 46.0s, target 46.7 2021-03-10 04:38:15:frequency.c:644:inc_freq_with_fixed_vco: heat speed too fast! current_temp 47 > 46.7 target_temp. 2021-03-10 04:38:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 39, chip_temp 41 ~ 47, now 52.0s, target 47.7 2021-03-10 04:38:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 40, chip_temp 41 ~ 47, now 53.0s, target 47.8 2021-03-10 04:38:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 39, chip_temp 41 ~ 48, now 54.0s, target 48.0 2021-03-10 04:38:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 40, chip_temp 41 ~ 48, now 55.0s, target 48.2 2021-03-10 04:38:25:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 39, chip_temp 41 ~ 47, now 56.0s, target 48.3 2021-03-10 04:38:26:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 39, chip_temp 41 ~ 48, now 57.0s, target 48.5 2021-03-10 04:38:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 39, chip_temp 41 ~ 48, now 58.0s, target 48.7 2021-03-10 04:38:28:frequency.c:623:inc_freq_with_fixed_vco: get pcb 36 ~ 40, chip_temp 41 ~ 48, now 59.0s, target 48.8 2021-03-10 04:38:29:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 42 ~ 49, now 60.0s, target 49.0 2021-03-10 04:38:30:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 42 ~ 49, now 61.0s, target 49.2 2021-03-10 04:38:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 40, chip_temp 42 ~ 49, now 62.0s, target 49.3 2021-03-10 04:38:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 42 ~ 49, now 63.0s, target 49.5 2021-03-10 04:38:33:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 42 ~ 48, now 64.0s, target 49.7 2021-03-10 04:38:34:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 42 ~ 48, now 65.0s, target 49.8 2021-03-10 04:38:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 43 ~ 49, now 66.1s, target 50.0 2021-03-10 04:38:36:frequency.c:623:inc_freq_with_fixed_vco: get pcb 37 ~ 40, chip_temp 42 ~ 49, now 67.1s, target 50.2 2021-03-10 04:38:37:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 40, chip_temp 43 ~ 50, now 68.1s, target 50.4 2021-03-10 04:38:38:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 41, chip_temp 43 ~ 50, now 69.1s, target 50.5 2021-03-10 04:38:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 41, chip_temp 43 ~ 50, now 70.1s, target 50.7 2021-03-10 04:38:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 41, chip_temp 43 ~ 49, now 71.1s, target 50.9 2021-03-10 04:38:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 41, chip_temp 43 ~ 50, now 72.1s, target 51.0 2021-03-10 04:38:42:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 41, chip_temp 43 ~ 50, now 73.1s, target 51.2 2021-03-10 04:38:43:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 41, chip_temp 43 ~ 50, now 74.1s, target 51.4 2021-03-10 04:38:44:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 41, chip_temp 43 ~ 50, now 75.1s, target 51.5 2021-03-10 04:38:45:frequency.c:623:inc_freq_with_fixed_vco: get pcb 38 ~ 42, chip_temp 44 ~ 49, now 76.1s, target 51.7 2021-03-10 04:38:45:frequency.c:657:inc_freq_with_fixed_vco: [0] _POSTDIV1 = 7, _POSTDIV2 = 7, USER_DIV = 1, freq = 61 2021-03-10 04:38:45:frequency.c:665:inc_freq_with_fixed_vco: set to 61M, get pcb 38 ~ 42, chip_temp 44 ~ 49 2021-03-10 04:38:45:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2100, step by step. 2021-03-10 04:39:00:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:39:00:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 61 clock_counter_limit 6, no check, skip. 2021-03-10 04:39:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 44, chip_temp 47 ~ 53, now 99.0s, target 55.5 2021-03-10 04:39:08:frequency.c:657:inc_freq_with_fixed_vco: [1] _POSTDIV1 = 7, _POSTDIV2 = 6, USER_DIV = 1, freq = 72 2021-03-10 04:39:08:frequency.c:665:inc_freq_with_fixed_vco: set to 72M, get pcb 40 ~ 44, chip_temp 47 ~ 53 2021-03-10 04:39:08:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:39:08:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 72 clock_counter_limit 8, no check, skip. 2021-03-10 04:39:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 46, chip_temp 48 ~ 54, now 107.0s, target 56.8 2021-03-10 04:39:16:frequency.c:657:inc_freq_with_fixed_vco: [2] _POSTDIV1 = 6, _POSTDIV2 = 6, USER_DIV = 1, freq = 84 2021-03-10 04:39:16:frequency.c:665:inc_freq_with_fixed_vco: set to 84M, get pcb 40 ~ 46, chip_temp 48 ~ 54 2021-03-10 04:39:16:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:39:16:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 84 clock_counter_limit 10, no check, skip. 2021-03-10 04:39:24:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 47, chip_temp 49 ~ 56, now 115.0s, target 58.2 2021-03-10 04:39:24:frequency.c:657:inc_freq_with_fixed_vco: [3] _POSTDIV1 = 7, _POSTDIV2 = 5, USER_DIV = 1, freq = 86 2021-03-10 04:39:24:frequency.c:665:inc_freq_with_fixed_vco: set to 86M, get pcb 41 ~ 47, chip_temp 49 ~ 56 2021-03-10 04:39:24:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:39:24:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 86 clock_counter_limit 10, no check, skip. 2021-03-10 04:39:32:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 48, chip_temp 50 ~ 57, now 123.0s, target 59.5 2021-03-10 04:39:32:frequency.c:657:inc_freq_with_fixed_vco: [4] _POSTDIV1 = 6, _POSTDIV2 = 5, USER_DIV = 1, freq = 101 2021-03-10 04:39:32:frequency.c:665:inc_freq_with_fixed_vco: set to 101M, get pcb 41 ~ 48, chip_temp 50 ~ 57 2021-03-10 04:39:32:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:39:32:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 101 clock_counter_limit 13, no check, skip. 2021-03-10 04:39:40:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 49, chip_temp 52 ~ 59, now 131.0s, target 60.8 2021-03-10 04:39:41:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 50, chip_temp 52 ~ 59, now 132.0s, target 61.0 2021-03-10 04:39:41:frequency.c:657:inc_freq_with_fixed_vco: [5] _POSTDIV1 = 7, _POSTDIV2 = 4, USER_DIV = 1, freq = 108 2021-03-10 04:39:41:frequency.c:665:inc_freq_with_fixed_vco: set to 108M, get pcb 41 ~ 50, chip_temp 52 ~ 59 2021-03-10 04:39:41:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:39:41:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 108 clock_counter_limit 14, no check, skip. 2021-03-10 04:39:49:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 51, chip_temp 53 ~ 61, now 140.1s, target 62.3 2021-03-10 04:39:50:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 51, chip_temp 53 ~ 61, now 141.1s, target 62.5 2021-03-10 04:39:51:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 51, chip_temp 54 ~ 61, now 142.1s, target 62.7 2021-03-10 04:39:52:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 52, chip_temp 54 ~ 61, now 143.1s, target 62.8 2021-03-10 04:39:53:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 52, chip_temp 54 ~ 61, now 144.1s, target 63.0 2021-03-10 04:39:53:frequency.c:657:inc_freq_with_fixed_vco: [6] _POSTDIV1 = 5, _POSTDIV2 = 5, USER_DIV = 1, freq = 121 2021-03-10 04:39:53:frequency.c:665:inc_freq_with_fixed_vco: set to 121M, get pcb 43 ~ 52, chip_temp 54 ~ 61 2021-03-10 04:39:53:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:39:53:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 121 clock_counter_limit 16, no check, skip. 2021-03-10 04:40:01:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 54, chip_temp 56 ~ 63, now 152.1s, target 64.3 2021-03-10 04:40:02:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 54, chip_temp 57 ~ 64, now 153.1s, target 64.5 2021-03-10 04:40:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 56 ~ 64, now 154.1s, target 64.7 2021-03-10 04:40:04:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 56 ~ 64, now 155.1s, target 64.8 2021-03-10 04:40:05:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 56 ~ 64, now 156.1s, target 65.0 2021-03-10 04:40:06:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 54, chip_temp 56 ~ 64, now 157.1s, target 65.2 2021-03-10 04:40:07:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 56 ~ 65, now 158.1s, target 65.3 2021-03-10 04:40:08:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 56 ~ 65, now 159.1s, target 65.5 2021-03-10 04:40:09:frequency.c:623:inc_freq_with_fixed_vco: get pcb 44 ~ 55, chip_temp 56 ~ 65, now 160.1s, target 65.7 2021-03-10 04:40:10:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 56, chip_temp 55 ~ 65, now 161.1s, target 65.8 2021-03-10 04:40:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 55, chip_temp 56 ~ 66, now 162.1s, target 66.0 2021-03-10 04:40:12:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 56, chip_temp 56 ~ 65, now 163.1s, target 66.2 2021-03-10 04:40:13:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 56, chip_temp 56 ~ 65, now 164.1s, target 66.3 2021-03-10 04:40:14:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 56, chip_temp 55 ~ 66, now 165.1s, target 66.5 2021-03-10 04:40:15:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 56, chip_temp 55 ~ 66, now 166.1s, target 66.7 2021-03-10 04:40:16:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 56, chip_temp 55 ~ 66, now 167.1s, target 66.8 2021-03-10 04:40:17:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 57, chip_temp 55 ~ 66, now 168.1s, target 67.0 2021-03-10 04:40:18:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 57, chip_temp 55 ~ 66, now 169.1s, target 67.2 2021-03-10 04:40:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 57, chip_temp 55 ~ 66, now 170.1s, target 67.3 2021-03-10 04:40:20:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 57, chip_temp 55 ~ 66, now 171.1s, target 67.5 2021-03-10 04:40:21:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 57, chip_temp 54 ~ 66, now 172.1s, target 67.7 2021-03-10 04:40:22:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 56, chip_temp 54 ~ 66, now 173.1s, target 67.8 2021-03-10 04:40:23:frequency.c:623:inc_freq_with_fixed_vco: get pcb 43 ~ 58, chip_temp 54 ~ 66, now 174.1s, target 68.0 2021-03-10 04:40:23:frequency.c:657:inc_freq_with_fixed_vco: [7] _POSTDIV1 = 6, _POSTDIV2 = 4, USER_DIV = 1, freq = 126 2021-03-10 04:40:23:frequency.c:665:inc_freq_with_fixed_vco: set to 126M, get pcb 43 ~ 58, chip_temp 54 ~ 66 2021-03-10 04:40:23:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:40:23:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 126 clock_counter_limit 17, no check, skip. 2021-03-10 04:40:31:frequency.c:623:inc_freq_with_fixed_vco: get pcb 42 ~ 58, chip_temp 53 ~ 66, now 182.1s, target 69.4 2021-03-10 04:40:31:frequency.c:657:inc_freq_with_fixed_vco: [8] _POSTDIV1 = 7, _POSTDIV2 = 3, USER_DIV = 1, freq = 144 2021-03-10 04:40:31:frequency.c:665:inc_freq_with_fixed_vco: set to 144M, get pcb 42 ~ 58, chip_temp 53 ~ 66 2021-03-10 04:40:31:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:40:31:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 144 clock_counter_limit 20, no check, skip. 2021-03-10 04:40:39:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 58, chip_temp 53 ~ 67, now 190.1s, target 70.7 2021-03-10 04:40:39:frequency.c:657:inc_freq_with_fixed_vco: [9] _POSTDIV1 = 5, _POSTDIV2 = 4, USER_DIV = 1, freq = 151 2021-03-10 04:40:39:frequency.c:665:inc_freq_with_fixed_vco: set to 151M, get pcb 41 ~ 58, chip_temp 53 ~ 67 2021-03-10 04:40:39:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:40:39:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 151 clock_counter_limit 21, no check, skip. 2021-03-10 04:40:47:frequency.c:623:inc_freq_with_fixed_vco: get pcb 41 ~ 57, chip_temp 53 ~ 66, now 198.1s, target 72.0 2021-03-10 04:40:47:frequency.c:657:inc_freq_with_fixed_vco: [10] _POSTDIV1 = 6, _POSTDIV2 = 3, USER_DIV = 1, freq = 168 2021-03-10 04:40:47:frequency.c:665:inc_freq_with_fixed_vco: set to 168M, get pcb 41 ~ 57, chip_temp 53 ~ 66 2021-03-10 04:40:47:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:40:47:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 168 clock_counter_limit 23, no check, skip. 2021-03-10 04:40:55:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 58, chip_temp 54 ~ 66, now 206.1s, target 69.4 2021-03-10 04:40:55:frequency.c:657:inc_freq_with_fixed_vco: [11] _POSTDIV1 = 4, _POSTDIV2 = 4, USER_DIV = 1, freq = 189 2021-03-10 04:40:55:frequency.c:665:inc_freq_with_fixed_vco: set to 189M, get pcb 40 ~ 58, chip_temp 54 ~ 66 2021-03-10 04:40:55:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:40:55:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 189 clock_counter_limit 27, no check, skip. 2021-03-10 04:41:03:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 57, chip_temp 55 ~ 66, now 214.1s, target 70.7 2021-03-10 04:41:03:frequency.c:657:inc_freq_with_fixed_vco: [12] _POSTDIV1 = 5, _POSTDIV2 = 3, USER_DIV = 1, freq = 202 2021-03-10 04:41:03:frequency.c:665:inc_freq_with_fixed_vco: set to 202M, get pcb 40 ~ 57, chip_temp 55 ~ 66 2021-03-10 04:41:03:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:41:03:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 202 clock_counter_limit 29, no check, skip. 2021-03-10 04:41:11:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 57, chip_temp 56 ~ 66, now 222.2s, target 72.0 2021-03-10 04:41:11:frequency.c:657:inc_freq_with_fixed_vco: [13] _POSTDIV1 = 7, _POSTDIV2 = 2, USER_DIV = 1, freq = 216 2021-03-10 04:41:11:frequency.c:665:inc_freq_with_fixed_vco: set to 216M, get pcb 40 ~ 57, chip_temp 56 ~ 66 2021-03-10 04:41:11:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:41:11:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 216 clock_counter_limit 31, no check, skip. 2021-03-10 04:41:19:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 57, chip_temp 57 ~ 66, now 230.2s, target 69.4 2021-03-10 04:41:19:frequency.c:657:inc_freq_with_fixed_vco: [14] _POSTDIV1 = 4, _POSTDIV2 = 3, USER_DIV = 1, freq = 253 2021-03-10 04:41:19:frequency.c:665:inc_freq_with_fixed_vco: set to 253M, get pcb 40 ~ 57, chip_temp 57 ~ 66 2021-03-10 04:41:19:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:41:19:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 253 clock_counter_limit 37, no check, skip. 2021-03-10 04:41:27:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 56, chip_temp 59 ~ 67, now 238.2s, target 70.7 2021-03-10 04:41:27:frequency.c:657:inc_freq_with_fixed_vco: [15] _POSTDIV1 = 6, _POSTDIV2 = 2, USER_DIV = 1, freq = 253 2021-03-10 04:41:27:frequency.c:665:inc_freq_with_fixed_vco: set to 253M, get pcb 39 ~ 56, chip_temp 59 ~ 67 2021-03-10 04:41:27:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:41:27:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 253 clock_counter_limit 37, no check, skip. 2021-03-10 04:41:35:frequency.c:623:inc_freq_with_fixed_vco: get pcb 40 ~ 57, chip_temp 59 ~ 66, now 246.2s, target 72.0 2021-03-10 04:41:35:frequency.c:657:inc_freq_with_fixed_vco: [16] _POSTDIV1 = 5, _POSTDIV2 = 2, USER_DIV = 1, freq = 303 2021-03-10 04:41:35:frequency.c:665:inc_freq_with_fixed_vco: set to 303M, get pcb 40 ~ 57, chip_temp 59 ~ 66 2021-03-10 04:41:35:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 2050, step by step. 2021-03-10 04:41:49:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.345, d1 0.340, d2 0.339, d3 0.341, sum = 1.364380 chain 1 domain 1: d0 0.346, d1 0.340, d2 0.339, d3 0.339, sum = 1.364054 chain 1 domain 2: d0 0.342, d1 0.340, d2 0.339, d3 0.342, sum = 1.362589 chain 1 domain 3: d0 0.346, d1 0.339, d2 0.337, d3 0.341, sum = 1.363810 chain 1 domain 4: d0 0.342, d1 0.338, d2 0.336, d3 0.339, sum = 1.355713 chain 1 domain 5: d0 0.347, d1 0.340, d2 0.339, d3 0.338, sum = 1.363770 chain 1 domain 6: d0 0.339, d1 0.335, d2 0.332, d3 0.336, sum = 1.341960 chain 1 domain 7: d0 0.343, d1 0.337, d2 0.336, d3 0.339, sum = 1.355143 chain 1 domain 8: d0 0.333, d1 0.328, d2 0.327, d3 0.329, sum = 1.317057 chain 1 domain 9: d0 0.338, d1 0.331, d2 0.330, d3 0.332, sum = 1.331339 chain 1 domain 10: d0 0.334, d1 0.331, d2 0.331, d3 0.334, sum = 1.330119 chain 1 domain 11: d0 0.332, d1 0.324, d2 0.323, d3 0.326, sum = 1.305135 chain 1 domain 12: d0 0.330, d1 0.327, d2 0.326, d3 0.326, sum = 1.309814 chain 1 domain 13: d0 0.333, d1 0.327, d2 0.327, d3 0.331, sum = 1.318197 chain 1 domain 14: d0 0.335, d1 0.330, d2 0.328, d3 0.333, sum = 1.324585 2021-03-10 04:41:50:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.347, d1 0.342, d2 0.359, d3 0.355, sum = 1.403036 chain 2 domain 1: d0 0.349, d1 0.344, d2 0.342, d3 0.342, sum = 1.377360 chain 2 domain 2: d0 0.341, d1 0.339, d2 0.338, d3 0.340, sum = 1.357544 chain 2 domain 3: d0 0.337, d1 0.331, d2 0.329, d3 0.329, sum = 1.325399 chain 2 domain 4: d0 0.334, d1 0.332, d2 0.328, d3 0.331, sum = 1.325317 chain 2 domain 5: d0 0.339, d1 0.332, d2 0.331, d3 0.333, sum = 1.335002 chain 2 domain 6: d0 0.340, d1 0.337, d2 0.336, d3 0.338, sum = 1.350586 chain 2 domain 7: d0 0.340, d1 0.336, d2 0.335, d3 0.337, sum = 1.348226 chain 2 domain 8: d0 0.332, d1 0.329, d2 0.328, d3 0.330, sum = 1.319661 chain 2 domain 9: d0 0.338, d1 0.334, d2 0.334, d3 0.334, sum = 1.339681 chain 2 domain 10: d0 0.330, d1 0.329, d2 0.328, d3 0.329, sum = 1.315674 chain 2 domain 11: d0 0.330, d1 0.324, d2 0.324, d3 0.326, sum = 1.304118 chain 2 domain 12: d0 0.331, d1 0.328, d2 0.327, d3 0.328, sum = 1.314290 chain 2 domain 13: d0 0.333, d1 0.327, d2 0.327, d3 0.330, sum = 1.316244 chain 2 domain 14: d0 0.337, d1 0.334, d2 0.333, d3 0.337, sum = 1.340820 2021-03-10 04:41:50:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-03-10 04:41:50:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:41:50:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 303 clock_counter_limit 45, no check, skip. 2021-03-10 04:41:52:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.343, d1 0.339, d2 0.338, d3 0.341, sum = 1.360758 chain 1 domain 1: d0 0.344, d1 0.339, d2 0.338, d3 0.339, sum = 1.360840 chain 1 domain 2: d0 0.342, d1 0.339, d2 0.338, d3 0.343, sum = 1.361450 chain 1 domain 3: d0 0.345, d1 0.338, d2 0.338, d3 0.341, sum = 1.361654 chain 1 domain 4: d0 0.340, d1 0.337, d2 0.336, d3 0.339, sum = 1.352254 chain 1 domain 5: d0 0.345, d1 0.338, d2 0.338, d3 0.338, sum = 1.359456 chain 1 domain 6: d0 0.339, d1 0.334, d2 0.333, d3 0.335, sum = 1.341105 chain 1 domain 7: d0 0.342, d1 0.336, d2 0.336, d3 0.338, sum = 1.352539 chain 1 domain 8: d0 0.333, d1 0.328, d2 0.328, d3 0.330, sum = 1.318929 chain 1 domain 9: d0 0.338, d1 0.331, d2 0.331, d3 0.332, sum = 1.332479 chain 1 domain 10: d0 0.334, d1 0.331, d2 0.332, d3 0.334, sum = 1.331584 chain 1 domain 11: d0 0.333, d1 0.325, d2 0.324, d3 0.327, sum = 1.308716 chain 1 domain 12: d0 0.330, d1 0.327, d2 0.327, d3 0.327, sum = 1.310872 chain 1 domain 13: d0 0.334, d1 0.328, d2 0.328, d3 0.331, sum = 1.320923 chain 1 domain 14: d0 0.335, d1 0.330, d2 0.329, d3 0.333, sum = 1.327474 2021-03-10 04:41:53:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.345, d1 0.341, d2 0.358, d3 0.355, sum = 1.399333 chain 2 domain 1: d0 0.347, d1 0.342, d2 0.341, d3 0.341, sum = 1.370850 chain 2 domain 2: d0 0.340, d1 0.338, d2 0.337, d3 0.339, sum = 1.354452 chain 2 domain 3: d0 0.336, d1 0.331, d2 0.328, d3 0.330, sum = 1.325033 chain 2 domain 4: d0 0.334, d1 0.332, d2 0.329, d3 0.331, sum = 1.325155 chain 2 domain 5: d0 0.338, d1 0.332, d2 0.331, d3 0.332, sum = 1.333740 chain 2 domain 6: d0 0.339, d1 0.337, d2 0.335, d3 0.337, sum = 1.347494 chain 2 domain 7: d0 0.340, d1 0.336, d2 0.334, d3 0.337, sum = 1.346069 chain 2 domain 8: d0 0.332, d1 0.330, d2 0.328, d3 0.330, sum = 1.319214 chain 2 domain 9: d0 0.337, d1 0.334, d2 0.333, d3 0.333, sum = 1.336833 chain 2 domain 10: d0 0.330, d1 0.329, d2 0.328, d3 0.328, sum = 1.315552 chain 2 domain 11: d0 0.330, d1 0.325, d2 0.324, d3 0.326, sum = 1.305705 chain 2 domain 12: d0 0.332, d1 0.329, d2 0.328, d3 0.329, sum = 1.317301 chain 2 domain 13: d0 0.334, d1 0.327, d2 0.327, d3 0.330, sum = 1.318156 chain 2 domain 14: d0 0.337, d1 0.334, d2 0.333, d3 0.336, sum = 1.340129 2021-03-10 04:41:53:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-03-10 04:41:59:frequency.c:623:inc_freq_with_fixed_vco: get pcb 39 ~ 56, chip_temp 60 ~ 66, now 270.2s, target 72.0 2021-03-10 04:41:59:frequency.c:657:inc_freq_with_fixed_vco: [17] _POSTDIV1 = 4, _POSTDIV2 = 2, USER_DIV = 1, freq = 379 2021-03-10 04:41:59:frequency.c:665:inc_freq_with_fixed_vco: set to 379M, get pcb 39 ~ 56, chip_temp 60 ~ 66 2021-03-10 04:41:59:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1960, step by step. 2021-03-10 04:42:13:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.328, d1 0.323, d2 0.324, d3 0.325, sum = 1.300171 chain 1 domain 1: d0 0.330, d1 0.323, d2 0.324, d3 0.324, sum = 1.301310 chain 1 domain 2: d0 0.326, d1 0.323, d2 0.325, d3 0.328, sum = 1.302083 chain 1 domain 3: d0 0.330, d1 0.322, d2 0.324, d3 0.326, sum = 1.302002 chain 1 domain 4: d0 0.326, d1 0.322, d2 0.323, d3 0.323, sum = 1.293416 chain 1 domain 5: d0 0.330, d1 0.324, d2 0.324, d3 0.323, sum = 1.300334 chain 1 domain 6: d0 0.324, d1 0.319, d2 0.319, d3 0.321, sum = 1.282267 chain 1 domain 7: d0 0.328, d1 0.321, d2 0.322, d3 0.322, sum = 1.293131 chain 1 domain 8: d0 0.318, d1 0.313, d2 0.314, d3 0.315, sum = 1.259562 chain 1 domain 9: d0 0.323, d1 0.316, d2 0.317, d3 0.317, sum = 1.272990 chain 1 domain 10: d0 0.319, d1 0.315, d2 0.318, d3 0.319, sum = 1.272217 chain 1 domain 11: d0 0.318, d1 0.310, d2 0.309, d3 0.311, sum = 1.248210 chain 1 domain 12: d0 0.315, d1 0.312, d2 0.312, d3 0.312, sum = 1.251221 chain 1 domain 13: d0 0.318, d1 0.312, d2 0.313, d3 0.315, sum = 1.258952 chain 1 domain 14: d0 0.319, d1 0.314, d2 0.314, d3 0.318, sum = 1.265422 2021-03-10 04:42:13:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.330, d1 0.326, d2 0.343, d3 0.342, sum = 1.340780 chain 2 domain 1: d0 0.332, d1 0.327, d2 0.326, d3 0.327, sum = 1.312948 chain 2 domain 2: d0 0.325, d1 0.322, d2 0.324, d3 0.324, sum = 1.295125 chain 2 domain 3: d0 0.322, d1 0.315, d2 0.315, d3 0.314, sum = 1.266357 chain 2 domain 4: d0 0.318, d1 0.315, d2 0.315, d3 0.316, sum = 1.264689 chain 2 domain 5: d0 0.323, d1 0.317, d2 0.317, d3 0.318, sum = 1.274780 chain 2 domain 6: d0 0.324, d1 0.321, d2 0.322, d3 0.322, sum = 1.289103 chain 2 domain 7: d0 0.325, d1 0.320, d2 0.321, d3 0.321, sum = 1.287354 chain 2 domain 8: d0 0.317, d1 0.314, d2 0.315, d3 0.315, sum = 1.261678 chain 2 domain 9: d0 0.323, d1 0.319, d2 0.319, d3 0.319, sum = 1.279460 chain 2 domain 10: d0 0.315, d1 0.314, d2 0.314, d3 0.314, sum = 1.257772 chain 2 domain 11: d0 0.315, d1 0.310, d2 0.310, d3 0.311, sum = 1.246582 chain 2 domain 12: d0 0.316, d1 0.313, d2 0.313, d3 0.313, sum = 1.255005 chain 2 domain 13: d0 0.318, d1 0.312, d2 0.313, d3 0.315, sum = 1.258464 chain 2 domain 14: d0 0.322, d1 0.318, d2 0.319, d3 0.321, sum = 1.280029 2021-03-10 04:42:13:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-03-10 04:42:13:frequency.c:671:inc_freq_with_fixed_vco: freq_mode 1=1 FREQ_MODE_USER, Conf.Check_Clock_Cnt=0 2021-03-10 04:42:13:driver-btm-api.c:1941:check_clock_counter_domain_last_core: freq 379 clock_counter_limit 57, no check, skip. 2021-03-10 04:42:16:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.326, d1 0.321, d2 0.323, d3 0.324, sum = 1.294556 chain 1 domain 1: d0 0.328, d1 0.322, d2 0.323, d3 0.323, sum = 1.295858 chain 1 domain 2: d0 0.326, d1 0.323, d2 0.324, d3 0.327, sum = 1.299194 chain 1 domain 3: d0 0.329, d1 0.321, d2 0.324, d3 0.324, sum = 1.298218 chain 1 domain 4: d0 0.324, d1 0.320, d2 0.322, d3 0.322, sum = 1.288249 chain 1 domain 5: d0 0.328, d1 0.321, d2 0.323, d3 0.321, sum = 1.293905 chain 1 domain 6: d0 0.323, d1 0.318, d2 0.319, d3 0.320, sum = 1.279541 chain 1 domain 7: d0 0.326, d1 0.320, d2 0.321, d3 0.321, sum = 1.288615 chain 1 domain 8: d0 0.318, d1 0.313, d2 0.314, d3 0.315, sum = 1.259888 chain 1 domain 9: d0 0.323, d1 0.315, d2 0.317, d3 0.317, sum = 1.272664 chain 1 domain 10: d0 0.319, d1 0.315, d2 0.318, d3 0.319, sum = 1.271973 chain 1 domain 11: d0 0.318, d1 0.310, d2 0.311, d3 0.312, sum = 1.250366 chain 1 domain 12: d0 0.315, d1 0.312, d2 0.313, d3 0.312, sum = 1.251546 chain 1 domain 13: d0 0.319, d1 0.312, d2 0.314, d3 0.316, sum = 1.260783 chain 1 domain 14: d0 0.319, d1 0.315, d2 0.315, d3 0.318, sum = 1.267660 2021-03-10 04:42:17:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.327, d1 0.324, d2 0.342, d3 0.340, sum = 1.333984 chain 2 domain 1: d0 0.330, d1 0.325, d2 0.324, d3 0.324, sum = 1.302979 chain 2 domain 2: d0 0.324, d1 0.321, d2 0.322, d3 0.323, sum = 1.289469 chain 2 domain 3: d0 0.320, d1 0.315, d2 0.314, d3 0.314, sum = 1.263387 chain 2 domain 4: d0 0.318, d1 0.315, d2 0.315, d3 0.315, sum = 1.262411 chain 2 domain 5: d0 0.322, d1 0.316, d2 0.317, d3 0.317, sum = 1.271281 chain 2 domain 6: d0 0.322, d1 0.319, d2 0.321, d3 0.321, sum = 1.283081 chain 2 domain 7: d0 0.324, d1 0.318, d2 0.320, d3 0.320, sum = 1.282511 chain 2 domain 8: d0 0.316, d1 0.313, d2 0.314, d3 0.314, sum = 1.258138 chain 2 domain 9: d0 0.321, d1 0.317, d2 0.318, d3 0.317, sum = 1.273438 chain 2 domain 10: d0 0.315, d1 0.313, d2 0.314, d3 0.313, sum = 1.254801 chain 2 domain 11: d0 0.315, d1 0.309, d2 0.311, d3 0.311, sum = 1.245565 chain 2 domain 12: d0 0.316, d1 0.313, d2 0.314, d3 0.313, sum = 1.255493 chain 2 domain 13: d0 0.318, d1 0.312, d2 0.313, d3 0.315, sum = 1.257690 chain 2 domain 14: d0 0.321, d1 0.317, d2 0.319, d3 0.320, sum = 1.276978 2021-03-10 04:42:17:driver-hash-chip.c:493:check_adc_voltage: PASS domainn volt check: request 0.800 (index 0, open_core) 2021-03-10 04:42:17:frequency.c:717:inc_freq_with_fixed_step: chain = 1, freq_start = 380, freq_end = 380, freq_step = 5, is_higher_voltage = true 2021-03-10 04:42:17:frequency.c:717:inc_freq_with_fixed_step: chain = 2, freq_start = 380, freq_end = 380, freq_step = 5, is_higher_voltage = true 2021-03-10 04:42:17:power_api.c:376:set_to_voltage_by_steps: Set to voltage raw 1910, step by step. 2021-03-10 04:42:29:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 1 with 0 regs timeout. chain 1 domain 0: d0 0.318, d1 0.314, d2 0.315, d3 0.316, sum = 1.262899 chain 1 domain 1: d0 0.320, d1 0.314, d2 0.315, d3 0.315, sum = 1.264120 chain 1 domain 2: d0 0.318, d1 0.315, d2 0.315, d3 0.318, sum = 1.266805 chain 1 domain 3: d0 0.321, d1 0.314, d2 0.315, d3 0.317, sum = 1.266113 chain 1 domain 4: d0 0.316, d1 0.313, d2 0.313, d3 0.315, sum = 1.257406 chain 1 domain 5: d0 0.321, d1 0.314, d2 0.315, d3 0.314, sum = 1.262939 chain 1 domain 6: d0 0.315, d1 0.310, d2 0.310, d3 0.312, sum = 1.247477 chain 1 domain 7: d0 0.318, d1 0.313, d2 0.313, d3 0.314, sum = 1.257853 chain 1 domain 8: d0 0.310, d1 0.306, d2 0.305, d3 0.307, sum = 1.227865 chain 1 domain 9: d0 0.315, d1 0.308, d2 0.308, d3 0.309, sum = 1.240641 chain 1 domain 10: d0 0.311, d1 0.308, d2 0.310, d3 0.311, sum = 1.239543 chain 1 domain 11: d0 0.310, d1 0.302, d2 0.302, d3 0.304, sum = 1.218058 chain 1 domain 12: d0 0.307, d1 0.304, d2 0.304, d3 0.304, sum = 1.219604 chain 1 domain 13: d0 0.311, d1 0.304, d2 0.305, d3 0.308, sum = 1.228434 chain 1 domain 14: d0 0.311, d1 0.307, d2 0.307, d3 0.309, sum = 1.234131 2021-03-10 04:42:30:driver-hash-chip.c:737:dump_adc_voltage_v2: get ADC_DATAOUT from chain 2 with 0 regs timeout. chain 2 domain 0: d0 0.320, d1 0.309, d2 0.331, d3 0.334, sum = 1.294027 chain 2 domain 1: d0 0.323, d1 0.317, d2 0.318, d3 0.317, sum = 1.275146 chain 2 domain 2: d0 0.316, d1 0.314, d2 0.316, d3 0.316, sum = 1.261230
|