raritycheck (OP)
Copper Member
Full Member
Offline
Activity: 697
Merit: 179
|
|
March 19, 2021, 03:03:25 PM |
|
Hey guys
We are launching a new Collectible coin.
Is this the correct place to do the annoucement? How do we go about checking interest? Also, we were checking on getting some holograms with "private keys" printed.
Can someone advice please?
We already have the designs ready. We are about to order the coins to the mint and wanted to check if anyone can help!
Thanks TeamRC
|
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2226
Merit: 2365
EIN: 82-3893490
|
|
March 19, 2021, 03:50:10 PM |
|
you are in the right place to announce and check interest - sharing pics/specs of the coin would be helpful.
as for holograms - you are not putting the private keys on the hologram where they are visible? I hope not. Private keys should be - well - private.
|
|
|
|
Steeley
Sr. Member
Offline
Activity: 1179
Merit: 268
Byzantine Generals' Problem solved,Prosperity Next
|
|
March 19, 2021, 05:52:37 PM |
|
RealityCheck:
I suspect there is a lot of interest and more room for new coin makers. I personally believe this hobby is going to grow exponentially in the next 10 years. I also want to point out a little friendly observation since I believe you really are asking for constructive criticism. You are asking for help and advice, but also announcing that everything is designed and ordered. In other words, sounds like you are hoping we’ll buy what you already made, versus hoping we can give helpful input into your creation.
|
Beware of scammers. I will never discuss the sale of Collectibles on Telegram or any other messaging client outside the forum.
|
|
|
raritycheck (OP)
Copper Member
Full Member
Offline
Activity: 697
Merit: 179
|
|
March 19, 2021, 06:46:14 PM Last edit: July 06, 2021, 04:09:40 PM by raritycheck |
|
you are in the right place to announce and check interest - sharing pics/specs of the coin would be helpful.
as for holograms - you are not putting the private keys on the hologram where they are visible? I hope not. Private keys should be - well - private.
Awesome. Thank you for this info. So for the first series we are going with these coins. - 50 - Gold plated .999 Fine Silver coins at the core loaded with (0.01 BTC each) :
- 200 - Pure .999 Fine Silver coins at the core loaded with (0.001 BTC each) :
Coins should be minted by April end and available for delivery by mid May. --------------------------------- @MoparMiningLLC As for holograms - you are not putting the private keys on the hologram where they are visible? I hope not. Private keys should be - well - private.We will check how to get holograms and apply private keys (hidden indeed). We are looking into holograms which cannot be reapplied. - Are there any known/trusted escrows, that we can use please?
- Can we do an initial offering where the escrow will recieve payment and once coins are delivered to the final customers, payment is released to us.
- Are there buyers interested in bulk buys?
Thanks TeamRC
|
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2226
Merit: 2365
EIN: 82-3893490
|
|
March 19, 2021, 06:52:03 PM |
|
Using escrow is a good idea, especially being a new coin maker.
There are several trusted escrow providers here in collectibles.
minerjones krogothmanhattan anonymousminer
are the first few that come to mind.
I also offer escrow services but in comparison to the 3 above, I am very new at it but I love to do it as a service to the community.
|
|
|
|
|
buckrogers
Legendary
Offline
Activity: 2745
Merit: 1181
|
|
March 21, 2021, 04:54:06 AM |
|
Hey guys
We are launching a new Collectible coin.
Is this the correct place to do the annoucement? How do we go about checking interest? Also, we were checking on getting some holograms with "private keys" printed.
Can someone advice please?
We already have the designs ready. We are about to order the coins to the mint and wanted to check if anyone can help!
Thanks TeamRC
Hi, I truly hope you "handle" - whatever way that may be, the private keys properly, If you dont know what that means, and from your OP it doesnt sound like you do...I highly suggest asking the proper method for doing so, documenting the entire process as transparent as can be. Or better yet, having/hiring a trusted maker to do them for you and apply them, with you or anyone from your team never seeing them and no copies existing after each one is applied. I personally wouldn't buy a loaded coin from a new maker these days, but thats just me. Good luck with your project. Thanks!
|
Well I'm dr. spock I'm here to rock y'all
|
|
|
Eclipse33
Copper Member
Sr. Member
Offline
Activity: 1096
Merit: 459
Eclipse™ Experimental Cryptographic Technology
|
|
March 21, 2021, 05:05:37 PM |
|
I like the idea and aesthetics of your proposed coin idea, you have an interested buyer when launch!
|
███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ | | . Eclipse | ) | | ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ | | | | │ | . ■▀ MARKETPLACE ■▀ TELEGRAM ■▀ TWITTER ■▀ INSTAGRAM | | | ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ | | | ███▄▄███████▄▄ █▄█████▀█▀█████▄ ▄███████████████▄ █████████████████ ███████████▀█████▄▄▄ ██████████████████████▄ ▀████████████████████▀██ ██████▄█▄██████████▀█████ ███▀▀████████▀█▀█▀███████ ██████████████▄███▄██████ ████████████████▄███████ ██████████▀███████████▀ ████████████▀▀█████▀▀ | | BTC |
| XMR | ACCEPTED | | | ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ ███ |
[/quote]
|
|
|
-doubleU-
Legendary
Offline
Activity: 1078
Merit: 1307
|
|
March 21, 2021, 07:45:49 PM |
|
- Are there any known/trusted escrows, that we can use please?
- Can we do an initial offering where the escrow will recieve payment and once coins are delivered to the final customers, payment is released to us.
- Are there buyers interested in bulk buys?
If you would like to offer your coins in the European D-A-CH region, i think you can speak/PM to willi9974 as a trustworthy escrow account and he can also organize a group purchase of your coins if there is a great interest in the coins in the German-speaking area of this forum.
|
|
|
|
Lesbian Cow
Legendary
Offline
Activity: 3052
Merit: 1755
|
|
March 23, 2021, 05:56:06 AM Merited by blucepheus (2) |
|
Why would anyone trust TeamRC to generate and hold their private keys?
|
|
|
|
raritycheck (OP)
Copper Member
Full Member
Offline
Activity: 697
Merit: 179
|
|
March 23, 2021, 12:25:50 PM |
|
OMG!! So many replies.. Replying one by one.. Thank you for the interest.
|
|
|
|
WhyFhy
|
|
March 23, 2021, 10:46:20 PM |
|
Why would anyone trust TeamRC to generate and hold their private keys?
OMG!! So many replies.. Replying one by one.. Thank you for the interest. Pretty important question don't you think? (probably the most important) You just kind of skipped over it?
|
|
|
|
raritycheck (OP)
Copper Member
Full Member
Offline
Activity: 697
Merit: 179
|
|
March 24, 2021, 02:09:02 PM |
|
Hey guys
We are launching a new Collectible coin.
Is this the correct place to do the annoucement? How do we go about checking interest? Also, we were checking on getting some holograms with "private keys" printed.
Can someone advice please?
We already have the designs ready. We are about to order the coins to the mint and wanted to check if anyone can help!
Thanks TeamRC
Hi, I truly hope you "handle" - whatever way that may be, the private keys properly, If you dont know what that means, and from your OP it doesnt sound like you do...I highly suggest asking the proper method for doing so, documenting the entire process as transparent as can be. Or better yet, having/hiring a trusted maker to do them for you and apply them, with you or anyone from your team never seeing them and no copies existing after each one is applied. I personally wouldn't buy a loaded coin from a new maker these days, but thats just me. Good luck with your project. Thanks! Hello Yes. We will be more than transparent. Has anyone created a checklist for this? We have following ideas in mind: Idea1: 1. Create private keys , print on circular A4 sheets 2. Load BTC 3. Apply to the insite of the hologram 4. Stick to the coin Idea 2: 1. Send coins and holograms to (an escrow either Minerjones in USA or someone in UK) 2. Escrow prints keys and sticks holograms to the coin 3. We load the coins (to the public keys provided by escrow) 4. Send coins to the buyers Any other ideas? Thanks Team RC
|
|
|
|
M-BTC
Full Member
Offline
Activity: 244
Merit: 232
Digital scarcity is a one-time discovery.
|
|
March 24, 2021, 02:41:48 PM |
|
Hey guys
We are launching a new Collectible coin.
Is this the correct place to do the annoucement? How do we go about checking interest? Also, we were checking on getting some holograms with "private keys" printed.
Can someone advice please?
We already have the designs ready. We are about to order the coins to the mint and wanted to check if anyone can help!
Thanks TeamRC
Hi, I truly hope you "handle" - whatever way that may be, the private keys properly, If you dont know what that means, and from your OP it doesnt sound like you do...I highly suggest asking the proper method for doing so, documenting the entire process as transparent as can be. Or better yet, having/hiring a trusted maker to do them for you and apply them, with you or anyone from your team never seeing them and no copies existing after each one is applied. I personally wouldn't buy a loaded coin from a new maker these days, but thats just me. Good luck with your project. Thanks! Hello Yes. We will be more than transparent. Has anyone created a checklist for this? We have following ideas in mind: Idea1: 1. Create private keys , print on circular A4 sheets 2. Load BTC 3. Apply to the insite of the hologram 4. Stick to the coin Idea 2: 1. Send coins and holograms to (an escrow either Minerjones in USA or someone in UK) 2. Escrow prints keys and sticks holograms to the coin 3. We load the coins (to the public keys provided by escrow) 4. Send coins to the buyers Any other ideas? Thanks Team RC Since you're new to this I'd prefer option 2. I wouldn't feel comfortable buying loaded coins from an individual who has no idea on how to safely generate private keys (no offense). Looking forward to seeing the design(s)!
|
|
|
|
raritycheck (OP)
Copper Member
Full Member
Offline
Activity: 697
Merit: 179
|
|
March 24, 2021, 04:22:21 PM |
|
Hey guys
We are launching a new Collectible coin.
Is this the correct place to do the annoucement? How do we go about checking interest? Also, we were checking on getting some holograms with "private keys" printed.
Can someone advice please?
We already have the designs ready. We are about to order the coins to the mint and wanted to check if anyone can help!
Thanks TeamRC
Hi, I truly hope you "handle" - whatever way that may be, the private keys properly, If you dont know what that means, and from your OP it doesnt sound like you do...I highly suggest asking the proper method for doing so, documenting the entire process as transparent as can be. Or better yet, having/hiring a trusted maker to do them for you and apply them, with you or anyone from your team never seeing them and no copies existing after each one is applied. I personally wouldn't buy a loaded coin from a new maker these days, but thats just me. Good luck with your project. Thanks! Hello Yes. We will be more than transparent. Has anyone created a checklist for this? We have following ideas in mind: Idea1: 1. Create private keys , print on circular A4 sheets 2. Load BTC 3. Apply to the insite of the hologram 4. Stick to the coin Idea 2: 1. Send coins and holograms to (an escrow either Minerjones in USA or someone in UK) 2. Escrow prints keys and sticks holograms to the coin 3. We load the coins (to the public keys provided by escrow) 4. Send coins to the buyers Any other ideas? Thanks Team RC Since you're new to this I'd prefer option 2. I wouldn't feel comfortable buying loaded coins from an individual who has no idea on how to safely generate private keys (no offense). Looking forward to seeing the design(s)! Hello Thank you for replying. Sure. We want to communicate clearly. We know how to generate private keys safely. Main issue is the 'trust'. Ofcourse we can generate offline private keys and load them. But as we are new (series 1), there will be trust issues. We will contact MinerJones, once we have the minted coins. Thanks
|
|
|
|
WhyFhy
|
|
March 24, 2021, 05:04:22 PM |
|
Having escrow make your keys seems like your already shut out your future and an unnecessary extra step. But around here its all about trust building, fool me once, fool me twice.... etc.
I or someone else with experience could crash course you in air-gapping keys and proper procedure to printing them without keys being leaked. 1 disposable computer -destroy ram+hdd+live usb... when done. 1 disposable printer -destroy when done, drill pcb chips. -Kinda like HIPPA but take it to the extreme. 1 trustworthy person.(yourself)
You could also offer split key generation on your first batch of coins via an escrowed presell. Escrow holds preorders and releases public keys users generate to you, Then you create a public key and partial private they compile the rest, That way you show expertise on these AND if endpoint customer loses their BTC, its on them not you.
This way you can send a loaded coin out that never had a private key to begin with as the customer holds it. ---this method does however mean resell market for your coin in a 2nd hand source will technically be compromised since your endpoint user is the only one with the key.
I do data destruction for Dell off lease systems. A firsthand source downstream.
|
|
|
|
raritycheck (OP)
Copper Member
Full Member
Offline
Activity: 697
Merit: 179
|
|
June 04, 2021, 09:27:02 PM Last edit: June 05, 2021, 12:22:15 AM by raritycheck |
|
UPDATE Hey guys, We did it. We have the coins. Coins look absolutely beautiful 0.01 BTC - Gilt silver: 0.001 BTC - Plated silver: Holo Stickers for private keys: --------- Following all the suggestions, we are buying a one time only Printer for printing keys (wired) and one time use-only computer for creating keys. We will keep you updated of the process. Once completed, we will sell some coins on first come first basis and some with auction. Looking forward to your comments and suggestions Thanks Team RC
|
|
|
|
-doubleU-
Legendary
Offline
Activity: 1078
Merit: 1307
|
|
June 04, 2021, 10:31:57 PM |
|
Thank you for the Update. I will help you with the Pictures. 0.01 BTC - Gilt silver: 0.001 BTC - Plated silver: Holo Stickers for private keys/: How many Coins are produced from each Variant and what for a Paper use you for printing the private Keys? A special Paper like Terra Slate Paper? Have you a Picture from a destroyed/peeled Holo Sticker for us?
|
|
|
|
owlcatz
Legendary
Offline
Activity: 3780
Merit: 1974
|
|
June 05, 2021, 12:18:03 AM |
|
UPDATE
Hey guys,
We did it. We have the coins.
Coins look absolutely beautiful
0.01 BTC - Gilt silver:
0.001 BTC - Plated silver:
Holo Stickers for private keys/:
--------- Following all the suggestions, we are buying a one time only Printer for printing keys (wired) and one time use-only computer for creating keys. We will keep you updated of the process.
Once completed, we will sell some coins on first come first basis and some with auction. Looking forward to your comments and suggestions
Thanks Team RC
Where are you physically located? Thanks! Edit - Are you worried about the fact you are using the batman symbol? Also, why batman? I love bitcoin, but not batman lol. I think you've severely limited your target buyers here based on that alone, but that's just my opinion ofc...
|
. I C Λ R U S | | | | █████▄▄█████▄▄ ████████▀▀▀████ ██████▀█████▀███ ████████████████ ████████████████ ████████████████ ░▄█████████████████ ███████████████████ ███████████████████ ████████░░░▀▀▀▀▀▀▀▀ ████████▄▄▄████████ ███████████████████ █████████████████▀ | ░░░███ ▄▄▄███ ██████ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ░░░███ ▄████████ ███▌░▐███ ████████▀ | | | | | █████████████████████ █████████████████████ █████████████████████ ██████▀▀▀▀████▀▀█████ █████░░▄▄░░██░░░█████ █████▄▄██░░███░░█████ █████▀▀▀▀░░▀██░░█████ ████░░░░▄▄▄▄█▀░░▀████ ████░░░░░░░░█░▀▀░████ █████████████████████ █████████████████████ █████████████████████ █████████████████████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | ████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ████ | | | | ████ ██
██ ████ | | ████ ██
██ ████ |
[/ce
|
|
|
MoparMiningLLC
aka Stryfe
Legendary
Online
Activity: 2226
Merit: 2365
EIN: 82-3893490
|
|
June 05, 2021, 04:09:08 AM |
|
List the estimated prices ? Or is that still undecided?
|
|
|
|
|