S17 Pro 59 TH/s - Hashboard

[Diego1907]

Hi together,

I need some help please.

Bought an S17 Pro 59 TH from China, but only 2 hashboards were working, 1 showed only 4 asics and therefore it was automatically switched off. The other 2 were working fine.

I have contacted the supplier and sent the hashboard back to them. They said they have repaired it and showed me a video how the hashboard works, but when I got the board back I have the same issue again. The miner detects only 4 asics on this board. It is always the same board, I tried also with changing the board slots.

Does some know if I´m doing something wrong? Or do you have any advise please?

Thanks a lot

[mikeywith]

The miner detects only 4 asics on this board. It is always the same board, I tried also with changing the board slots.

Does some know if I´m doing something wrong? Or do you have any advise please?

You are probably not doing anything wrong, this is a very common problem with all Bitmain 17 series gears, these boards break really easily and it's hard to fix them, if your supplier really fixed it then they probably didn't solder/glue the heatsink well and it lost contact again, of course, this assumes he is honest in the first place.

There isn't something you can do about it unless you are familiar with electronics and have the tools needed, ask him for a refund or perhaps send it to a repair center nearby, where are you located?

[Diego1907]

The miner detects only 4 asics on this board. It is always the same board, I tried also with changing the board slots.

Does some know if I´m doing something wrong? Or do you have any advise please?

You are probably not doing anything wrong, this is a very common problem with all Bitmain 17 series gears, these boards break really easily and it's hard to fix them, if your supplier really fixed it then they probably didn't solder/glue the heatsink well and it lost contact again, of course, this assumes he is honest in the first place.

There isn't something you can do about it unless you are familiar with electronics and have the tools needed, ask him for a refund or perhaps send it to a repair center nearby, where are you located?

Thanks a lot for your advise. The issue I have is I´m in Germany and can´t find anyone here or in another European country who can repair.